scritcher/doc/README.md
2019-08-06 19:25:31 -03:00

178 lines
5.6 KiB
Markdown

scritcher command reference
---
scritcher scripts are shell-like commands separated by a semicolon.
## parameters of the arg type
some commands allow a `:N` syntax where N is an integer to use a given
argument when `scritcher` is called. so, for example, calling a script:
```
load :0;
showpath;
```
and then doing `scritcher path/to/script.scri arg` will print `arg` on the
screen and then exit.
## split and index arguments
plugin commands have a split and an index argument so that you can select
where in the file you want the plugin to be ran.
so, if you did `plugin 3 1...`, it would split the file in 3, then get the
part that is of index 1 (starting at 0).
**Keep in mind parts start from the bottom of the file.**
## `load path_or_arg`
Load a file into memory. The file MUST end with the bmp extension (and so MUST
be a bmp. feel free to put other files, no warranties are given.)
## `amp split index gain`
Run the eg-amp plugin over the given slice of the file.
## `rflanger split index delay_depth_avg law_freq`
Run the Retro Flanger script from the SWH plugins.
Parameters:
- `delay_depth_avg`: Average stall (ms), 0..10, default 2.5
- `law_freq`: Flange frequency (Hz), 0.5..8, default 1
## `eq split index lo mid hi`
Run the DJ EQ plugin from the SWH plugins.
Parameters:
- `lo`: Low range
`lo`, `mid`, and `hi` are the respective dB gains for each frequency range.
All three ranges accept gains from -70dB to +6dB.
Default is 0 for all (no action taken).
## `phaser split index lfo_rate lfo_depth fb spread`
Run the LFO Phaser plugin from the SWH plugins.
Parameters:
- `lfo_rate`: LFO Rate (Hz), 0..100, default 25
- `lfo_depth`: LFO depth, 0..1, default 0.25
- `fb`: Feedback, -1..1, default 0
- `spread`: Spread (octaves), 0..2, default 1
## `mbeq split index band_1 band_2 band_3 band_4 band_5 band_6 band_7 band_8 band_9 band_10 band_11 band_12 band_13 band_14 band_15`
Multiband EQ from the SWH plugins.
In respective order, the band arugments represent the:
50Hz, 100Hz, 156Hz, 220Hz, 311Hz, 440Hz, 622Hz, 880Hz 1250Hz, 1750Hz, 2500Hz,
3500Hz, 5000Hz, 10000Hz and 20000Hz frequencies.
All of them represent the band's gain in dB. The range is -70 to +30dB,
default is 0.
## `chorus split index voices delay_base voice_spread detune law_freq attendb`
Multivoice Chrorus from the SWH plugins.
Parameters:
- `voices`: Number of voices (int), 1..8, default 1
- `delay_base`: Delay base (ms), 10..40, default 10
- `voice_spread`: Voice separation (ms), 0-2, default 0.5
- `detune`: Detune (%), 0..5, default 1
- `law_freq`: LFO frequency (Hz), 2..30, default 9
- `attendb`: Output attenuation (dB), -20..0, default 0
## `pitchscaler split index mult`
Runs the Higher Quality Pitch Scaler from the SWH plugins.
The `mult` parameter is the pitch coefficient, range from 0.5..2, default 1.
## `reverb split index roomLength roomWidth roomHeight sourceLR sourceFB listLR listFB hpf warmth diffusion`
Run the Early Reflection Reverb from the Invada Studio plugins.
Parameters:
- `roomLength`: Room Length, 3..100, default 25
- `roomWidth`: Room Length, 3..100, default 30
- `roomHeight`: Room Length, 3..100, default 10
- `sourceLR`: Source Pan, -1..1, default -0.01
- `sourceFB`: Source (F/B), 0.5..1, default 0.8
- `listLR`: Listener Pan, -1..1, default 0.01
- `listFB`: Listener (F/B), 0..0.5, default 0.2
- `hpf`: HPF (High Pass Filter), 20..2000, default 1000 (most likely you want 20)
- `warmth`: Warmth, 0..100, default 50
- `diffusion`: Diffusion, 0..100, default 50
## `highpass split index freq gain noClip`
Run the High Pass Filter from the Invada Studio plugins.
Parameters:
- `freq`: Frequency. 20..20000, default 1000
- `gain`: Gain, 0..12, default 0
- `noClip`: Soft Clip (assumed boolean), 0..1, default 0
## `delay split index seed gain feedback_pc tap_count first_delay delay_range delay_scale delay_rand_pc gain_scale wet`
Parameters:
- `seed`: Random seed, 0..1000, default 0
- `gain`: Input gain (dB), -96..24, default 0
- `feedback_pc`: Feedback (%), 0..100, default 0
- `tap_count`: Number of taps, 2..128, default 2
- `first_delay`: First delay (s), 0..5, default 0
- `delay_range`: Delay range (s), 0..6, default 6
- `delay_scale`: Delay change, 0..5, default 1
- `delay_rand_pc`: Delay random (%), 0..100, default 0
- `gain_scale`: Amplitude change, 0.2..5, default 1
- `wet`: Dry/wet mix, 0..1, default 1
## `vinyl split index year warp click wear`
VyNil effect from SWH.
Parameters:
- `year`: Year (int), 1900..1990, default 1990
- `rpm`: RPM (int), 33..78, default 33
- `warp`: Surface Warping, 0..1, default 0
- `click`: Crackle, 0..1, default 0
- `wear`: Wear, 0..1, default 0
## `revdelay split index delay_time dry_level wet_level feedback xfade_samp`
Parameters:
- `delay_time`: Delay time (s), 0..5, default 0
- `dry_level`: Dry Level (dB), -70..0, default 0
- `wet_level`: Wet Level (dB), -70..0, default 0,
- `feedback`: Feedback, 0..1, default 0
- `xfade_samp`: Crossfade samples (int), 0..5000, default 1250
## `wildnoise/noise split index seed repeat_bytes`
Inject random noise on the image.
the `wildnoise` version gives a harder version than `noise`.
Parameters:
- `seed`, Random seed
- `repeat_bytes`, Amount of bytes to preload with random data and repeat
throughout the image slice
## `rotate deg bgfill`
Rotate the image by `deg` degrees, filling the resulting triangles with `bgfill`.
`bgfill` is a hex string, e.g `#000000`.
## `quicksave`
Save the file on the same directory of the file specified by `load`, but
with a suffix on the filename (before extension).
Doing consecutive `quicksave`s will not overwrite any files, the suffixes will
just be different.