scritcher/doc/README.md

132 lines
4 KiB
Markdown
Raw Normal View History

2019-06-07 02:45:54 +00:00
scritcher command reference
---
scritcher scripts are shell-like commands separated by a semicolon.
## parameters of the arg type
some commands allow a `:N` syntax where N is an integer to use a given
argument when `scritcher` is called. so, for example, calling a script:
```
2019-07-09 21:51:00 +00:00
load :0;
2019-06-07 02:45:54 +00:00
showpath;
```
and then doing `scritcher path/to/script.scri arg` will print `arg` on the
screen and then exit.
2019-07-09 21:51:00 +00:00
## split and index arguments
plugin commands have a split and an index argument so that you can select
where in the file you want the plugin to be ran.
so, if you did `plugin 3 1...`, it would split the file in 3, then get the
part that is of index 1 (starting at 0).
2019-06-07 02:45:54 +00:00
2019-07-10 19:24:43 +00:00
**Keep in mind parts start from the bottom of the file.**
2019-06-07 02:45:54 +00:00
## `load path_or_arg`
2019-07-09 21:51:00 +00:00
Load a file into memory. The file MUST end with the bmp extension (and so MUST
be a bmp. feel free to put other files, no warranties are given.)
## `amp split index gain`
Run the eg-amp plugin over the given slice of the file.
2019-06-07 02:45:54 +00:00
2019-07-10 16:24:03 +00:00
## `rflanger split index delay_depth_avg law_freq`
2019-07-10 19:13:15 +00:00
Run the Retro Flanger script from the SWH plugins.
- `delay_depth_avg` is for the `Average stall (ms)` parameter of the plugin.
- `law_freq` is for the `Flange frequency` parameter of the plugin.
## `eq split index lo mid hi`
Run the DJ EQ plugin from the SWH plugins.
`lo`, `mid`, and `hi` are the respective dB gains for each frequency range.
All three ranges accept gains from -70dB to +6dB.
2019-07-10 19:24:43 +00:00
Default is 0 for all (no action taken).
## `phaser split index lfo_rate lfo_depth fb spread`
Run the LFO Phaser plugin from the SWH plugins.
Parameters:
- `lfo_rate`: LFO Rate (Hz), 0..100, default 25
- `lfo_depth`: LFO depth, 0..1, default 0.25
- `fb`: Feedback, -1..1, default 0
- `spread`: Spread (octaves), 0..2, default 1
2019-07-10 16:24:03 +00:00
2019-07-10 19:43:30 +00:00
## `mbeq split index band_1 band_2 band_3 band_4 band_5 band_6 band_7 band_8 band_9 band_10 band_11 band_12 band_13 band_14 band_15`
2019-07-10 19:59:15 +00:00
Multiband EQ from the SWH plugins.
2019-07-10 19:43:30 +00:00
In respective order, the band arugments represent the:
50Hz, 100Hz, 156Hz, 220Hz, 311Hz, 440Hz, 622Hz, 880Hz 1250Hz, 1750Hz, 2500Hz,
3500Hz, 5000Hz, 10000Hz and 20000Hz frequencies.
All of them represent the band's gain in dB. The range is -70 to +30dB,
default is 0.
2019-07-10 19:59:15 +00:00
## `chorus split index voices delay_base voice_spread detune law_freq attendb`
Multivoice Chrorus from the SWH plugins.
Parameters:
- `voices`: Number of voices (int), 1..8, default 1
- `delay_base`: Delay base (ms), 10..40, default 10
- `voice_spread`: Voice separation (ms), 0-2, default 0.5
- `detune`: Detune (%), 0..5, default 1
- `law_freq`: LFO frequency (Hz), 2..30, default 9
- `attendb`: Output attenuation (dB), -20..0, default 0
2019-07-10 20:31:18 +00:00
## `pitchscaler split index mult`
Runs the Higher Quality Pitch Scaler from the SWH plugins.
The `mult` parameter is the pitch coefficient, range from 0.5..2, default 1.
## `reverb split index roomLength roomHeight sourceLR sourceFB listLR listFB hpf warmth diffusion`
2019-07-10 23:19:40 +00:00
Run the Early Reflection Reverb from the Invada Studio plugins.
**TODO** Parameter list
## `highpass split index freq gain noClip`
Run the High Pass Filter from the Invada Studio plugins.
Parameters:
2019-07-11 13:20:09 +00:00
- `freq`: Frequency. 20..20000, default 1000
- `gain`: Gain, 0..12, default 0
- `noClip`: Soft Clip (assumed boolean), 0..1, default 0
## `delay seed gain`
Parameters:
- `seed`: Random seed, 0..1000, default 0
- `gain`: Input gain (dB), -96..24, default 0
- `feedback_pc`: Feedback (%), 0..100, default 0
- `tap_count`: Number of taps, 2..128, default 2
- `first_delay`: First delay (s), 0..5, default 0
- `delay_range`: Delay range (s), 0..6, default 6
- `delay_scale`: Delay change, 0..5, default 1
- `delay_rand_pc`: Delay random (%), 0..100, default 0
- `gain_scale`: Amplitude change, 0.2..5, default 1
- `wet`: Dry/wet mix, 0..1, default 1
2019-07-10 23:19:40 +00:00
2019-07-09 21:51:00 +00:00
## TODO `echo split index delay`
2019-06-07 02:45:54 +00:00
Run an echo filter on the given loaded file.
## `quicksave`
2019-06-07 02:45:54 +00:00
Save the file on the same directory of the file specified by `load`, but
with a suffix on the filename (before extension).
Doing consecutive `quicksave`s will not overwrite any files, the suffixes will
just be different.