add kitty

hammerspoon/TerminalPalette.lua

@@ -110,7 +110,8 @@ chooser:rows(9)
 
 hs.hotkey.bind({"cmd", "shift"}, "a", function()
   app = hs.application.frontmostApplication()
-  if app:name():lower():match("term") then
+  app_name = app:name():lower()
+  if app_name:match("term") or app_name:match("kitty") then
     chooser:show()
   end
 end)

install.zsh

@@ -15,12 +15,18 @@ install_dotfile() {
 }
 
 # ZSH
-for zsh_file_name in zshrc; do
+for file_name in zshrc; do
-  zsh_file_path="$DOTFILES_PATH/zsh/$zsh_file_name"
+  file_path="$DOTFILES_PATH/zsh/$file_name"
-  install_dotfile "$HOME/.$zsh_file_name" "source ${(q)zsh_file_path}"
+  install_dotfile "$HOME/.$file_name" "source ${(q)file_path}"
 done
-unset zsh_file_name zsh_file_path
 
 # Neovim
-install_dotfile ~/.config/nvim/init.vim "source $DOTFILES_PATH/nvim/init.vim"
+for file_name in {init,ginit}.vim; do
-install_dotfile ~/.config/nvim/ginit.vim "source $DOTFILES_PATH/nvim/ginit.vim"
+  file_path="$DOTFILES_PATH/nvim/$file_name"
+  install_dotfile "$HOME/.config/nvim/$file_name" "source ${(q)file_path}"
+done
+
+# Kitty
+file_name=kitty.conf
+file_path="$DOTFILES_PATH/$file_name"
+install_dotfile "$HOME/.config/kitty/$file_name" "include ${(q)file_path}"

kitty.conf

@@ -0,0 +1,895 @@
+# vim:fileencoding=utf-8:ft=conf:foldmethod=marker
+
+#: Fonts {{{
+
+#: kitty has very powerful font management. You can configure
+#: individual font faces and even specify special fonts for particular
+#: characters.
+
+font_family      Ubuntu Mono derivative Powerline
+# bold_font        auto
+# italic_font      auto
+# bold_italic_font auto
+
+#: You can specify different fonts for the bold/italic/bold-italic
+#: variants. By default they are derived automatically, by the OSes
+#: font system. Setting them manually is useful for font families that
+#: have many weight variants like Book, Medium, Thick, etc. For
+#: example::
+
+#:     font_family      Operator Mono Book
+#:     bold_font        Operator Mono Medium
+#:     italic_font      Operator Mono Book Italic
+#:     bold_italic_font Operator Mono Medium Italic
+
+font_size 14.0
+
+#: Font size (in pts)
+
+# adjust_line_height  0
+# adjust_column_width 0
+
+#: Change the size of each character cell kitty renders. You can use
+#: either numbers, which are interpreted as pixels or percentages
+#: (number followed by %), which are interpreted as percentages of the
+#: unmodified values. You can use negative pixels or percentages less
+#: than 100% to reduce sizes (but this might cause rendering
+#: artifacts).
+
+# symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols
+
+#: Map the specified unicode codepoints to a particular font. Useful
+#: if you need special rendering for some symbols, such as for
+#: Powerline. Avoids the need for patched fonts. Each unicode code
+#: point is specified in the form U+<code point in hexadecimal>. You
+#: can specify multiple code points, separated by commas and ranges
+#: separated by hyphens. symbol_map itself can be specified multiple
+#: times. Syntax is::
+
+#:     symbol_map codepoints Font Family Name
+
+# box_drawing_scale 0.001, 1, 1.5, 2
+
+#: Change the sizes of the lines used for the box drawing unicode
+#: characters These values are in pts. They will be scaled by the
+#: monitor DPI to arrive at a pixel value. There must be four values
+#: corresponding to thin, normal, thick, and very thick lines.
+
+#: }}}
+
+#: Cursor customization {{{
+
+cursor #d3d0c8
+
+#: Default cursor color
+
+cursor_text_color #2d2d2d
+
+#: Choose the color of text under the cursor. If you want it rendered
+#: with the background color of the cell underneath instead, use the
+#: special keyword: background
+
+# cursor_shape block
+
+#: The cursor shape can be one of (block, beam, underline)
+
+cursor_blink_interval      0
+cursor_stop_blinking_after 0
+
+#: The interval (in seconds) at which to blink the cursor. Set to zero
+#: to disable blinking. Note that numbers smaller than repaint_delay
+#: will be limited to repaint_delay. Stop blinking cursor after the
+#: specified number of seconds of keyboard inactivity. Set to zero to
+#: never stop blinking.
+
+#: }}}
+
+#: Scrollback {{{
+
+# scrollback_lines 2000
+
+#: Number of lines of history to keep in memory for scrolling back.
+#: Memory is allocated on demand. Negative numbers are (effectively)
+#: infinite scrollback. Note that using very large scrollback is not
+#: recommended a it can slow down resizing of the terminal and also
+#: use large amounts of RAM.
+
+# scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER
+
+#: Program with which to view scrollback in a new window. The
+#: scrollback buffer is passed as STDIN to this program. If you change
+#: it, make sure the program you use can handle ANSI escape sequences
+#: for colors and text formatting. INPUT_LINE_NUMBER in the command
+#: line above will be replaced by an integer representing which line
+#: should be at the top of the screen.
+
+# wheel_scroll_multiplier 5.0
+
+#: Modify the amount scrolled by the mouse wheel. Note this is only
+#: used for low precision scrolling devices, not for high precision
+#: scrolling on platforms such as macOS and Wayland. Use negative
+#: numbers to change scroll direction.
+
+#: }}}
+
+#: Mouse {{{
+
+url_color #6699cc
+url_style double
+
+#: The color and style for highlighting URLs on mouse-over. url_style
+#: can be one of: none, single, double, curly
+
+# open_url_modifiers kitty_mod
+
+#: The modifier keys to press when clicking with the mouse on URLs to
+#: open the URL
+
+# open_url_with default
+
+#: The program with which to open URLs that are clicked on. The
+#: special value default means to use the operating system's default
+#: URL handler.
+
+# copy_on_select no
+
+#: Copy to clipboard on select. With this enabled, simply selecting
+#: text with the mouse will cause the text to be copied to clipboard.
+#: Useful on platforms such as macOS/Wayland that do not have the
+#: concept of primary selections. Note that this is a security risk,
+#: as all programs, including websites open in your browser can read
+#: the contents of the clipboard.
+
+# rectangle_select_modifiers ctrl+alt
+
+#: The modifiers to use rectangular selection (i.e. to select text in
+#: a rectangular block with the mouse)
+
+# select_by_word_characters :@-./_~?&=%+#
+
+#: Characters considered part of a word when double clicking. In
+#: addition to these characters any character that is marked as an
+#: alpha-numeric character in the unicode database will be matched.
+
+# click_interval 0.5
+
+#: The interval between successive clicks to detect double/triple
+#: clicks (in seconds)
+
+mouse_hide_wait 3.0
+
+#: Hide mouse cursor after the specified number of seconds of the
+#: mouse not being used. Set to zero to disable mouse cursor hiding.
+
+focus_follows_mouse no
+
+#: Set the active window to the window under the mouse when moving the
+#: mouse around
+
+#: }}}
+
+#: Performance tuning {{{
+
+# repaint_delay 10
+
+#: Delay (in milliseconds) between screen updates. Decreasing it,
+#: increases frames-per-second (FPS) at the cost of more CPU usage.
+#: The default value yields ~100 FPS which is more than sufficient for
+#: most uses. Note that to actually achieve 100 FPS you have to either
+#: set sync_to_monitor to no or use a monitor with a high refresh
+#: rate.
+
+# input_delay 3
+
+#: Delay (in milliseconds) before input from the program running in
+#: the terminal is processed. Note that decreasing it will increase
+#: responsiveness, but also increase CPU usage and might cause flicker
+#: in full screen programs that redraw the entire screen on each loop,
+#: because kitty is so fast that partial screen updates will be drawn.
+
+sync_to_monitor yes
+
+#: Sync screen updates to the refresh rate of the monitor. This
+#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
+#: when scrolling. However, it limits the rendering speed to the
+#: refresh rate of your monitor. With a very high speed mouse/high
+#: keyboard repeat rate, you may notice some slight input latency. If
+#: so, set this to no.
+
+#: }}}
+
+#: Terminal bell {{{
+
+# enable_audio_bell yes
+
+#: Enable/disable the audio bell. Useful in environments that require
+#: silence.
+
+# visual_bell_duration 0.0
+
+#: Visual bell duration. Flash the screen when a bell occurs for the
+#: specified number of seconds. Set to zero to disable.
+
+window_alert_on_bell yes
+
+#: Request window attention on bell. Makes the dock icon bounce on
+#: macOS or the taskbar flash on linux.
+
+bell_on_tab yes
+
+#: Show a bell symbol on the tab if a bell occurs in one of the
+#: windows in the tab and the window is not the currently focused
+#: window
+
+#: }}}
+
+#: Window layout {{{
+
+# remember_window_size  yes
+# initial_window_width  640
+# initial_window_height 400
+
+#: If enabled, the window size will be remembered so that new
+#: instances of kitty will have the same size as the previous
+#: instance. If disabled, the window will initially have size
+#: configured by initial_window_width/height, in pixels. You can use a
+#: suffix of "c" on the width/height values to have them interpreted
+#: as number of cells instead of pixels.
+
+# enabled_layouts *
+
+#: The enabled window layouts. A comma separated list of layout names.
+#: The special value all means all layouts. The first listed layout
+#: will be used as the startup layout. For a list of available
+#: layouts, see the
+#: https://sw.kovidgoyal.net/kitty/index.html#layouts.
+
+# window_resize_step_cells 2
+# window_resize_step_lines 2
+
+#: The step size (in units of cell width/cell height) to use when
+#: resizing windows. The cells value is used for horizontal resizing
+#: and the lines value for vertical resizing.
+
+# window_border_width 1.0
+
+#: The width (in pts) of window borders. Will be rounded to the
+#: nearest number of pixels based on screen resolution. Note that
+#: borders are displayed only when more than one window is visible.
+#: They are meant to separate multiple windows.
+
+# draw_minimal_borders no
+
+#: Draw only the minimum borders needed. This means that only the
+#: minimum needed borders for inactive windows are drawn. That is only
+#: the borders that separate the inactive window from a neighbor. Note
+#: that setting a non-zero window margin overrides this and causes all
+#: borders to be drawn.
+
+window_margin_width 0.5
+
+#: The window margin (in pts) (blank area outside the border)
+
+# single_window_margin_width -1000.0
+
+#: The window margin (in pts) to use when only a single window is
+#: visible. Negative values will cause the value of
+#: window_margin_width to be used instead.
+
+window_padding_width 2.0
+
+#: The window padding (in pts) (blank area between the text and the
+#: window border)
+
+active_border_color #99cc99
+
+#: The color for the border of the active window
+
+inactive_border_color #747369
+
+#: The color for the border of inactive windows
+
+bell_border_color #f2777a
+
+#: The color for the border of inactive windows in which a bell has
+#: occurred
+
+inactive_text_alpha 0.5
+
+#: Fade the text in inactive windows by the specified amount (a number
+#: between zero and one, with zero being fully faded).
+
+#: }}}
+
+#: Tab bar {{{
+
+tab_bar_edge top
+
+#: Which edge to show the tab bar on, top or bottom
+
+# tab_bar_margin_width 0.0
+
+#: The margin to the left and right of the tab bar (in pts)
+
+tab_bar_style separator
+
+#: The tab bar style, can be one of: fade or separator. In the fade
+#: style, each tab's edges fade into the background color, in the
+#: separator style, tabs are separated by a configurable separator.
+
+# tab_fade 0.25 0.5 0.75 1
+
+#: Control how each tab fades into the background when using fade for
+#: the tab_bar_style. Each number is an alpha (between zero and one)
+#: that controls how much the corresponding cell fades into the
+#: background, with zero being no fade and one being full fade. You
+#: can change the number of cells used by adding/removing entries to
+#: this list.
+
+tab_separator " │ "
+
+#: The separator between tabs in the tab bar when using separator as
+#: the tab_bar_style.
+
+# active_tab_foreground   #000
+# active_tab_background   #eee
+active_tab_font_style   bold
+# inactive_tab_foreground #444
+# inactive_tab_background #999
+inactive_tab_font_style italic
+
+#: Tab bar colors and styles
+
+#: }}}
+
+#: Color scheme {{{
+
+foreground #d3d0c8
+background #2d2d2d
+
+#: The foreground and background colors
+
+# background_opacity         1.0
+# dynamic_background_opacity no
+
+#: The opacity of the background. A number between 0 and 1, where 1 is
+#: opaque and 0 is fully transparent.  This will only work if
+#: supported by the OS (for instance, when using a compositor under
+#: X11). Note that it only sets the default background color's
+#: opacity. This is so that things like the status bar in vim,
+#: powerline prompts, etc. still look good.  But it means that if you
+#: use a color theme with a background color in your editor, it will
+#: not be rendered as transparent.  Instead you should change the
+#: default background color in your kitty config and not use a
+#: background color in the editor color scheme. Or use the escape
+#: codes to set the terminals default colors in a shell script to
+#: launch your editor.  Be aware that using a value less than 1.0 is a
+#: (possibly significant) performance hit.  If you want to dynamically
+#: change transparency of windows set dynamic_background_opacity to
+#: yes (this is off by default as it has a performance cost)
+
+# dim_opacity 0.75
+
+#: How much to dim text that has the DIM/FAINT attribute set. One
+#: means no dimming and zero means fully dimmed (i.e. invisible).
+
+selection_foreground #d3d0c8
+selection_background #515151
+
+#: The foreground and background for text selected with the mouse
+
+
+#: The 16 terminal colors. There are 8 basic colors, each color has a
+#: dull and bright version. You can also set the remaining colors from
+#: the 256 color table as color16 to color255.
+
+color0 #2d2d2d
+color8 #747369
+
+#: black
+
+color1 #f2777a
+color9 #f2777a
+
+#: red
+
+color2  #99cc99
+color10 #99cc99
+
+#: green
+
+color3  #ffcc66
+color11 #ffcc66
+
+#: yellow
+
+color4  #6699cc
+color12 #6699cc
+
+#: blue
+
+color5  #cc99cc
+color13 #cc99cc
+
+#: magenta
+
+color6  #66cccc
+color14 #66cccc
+
+#: cyan
+
+color7  #d3d0c8
+color15 #f2f0ec
+
+#: white
+
+#: }}}
+
+#: Advanced {{{
+
+shell zsh --login
+
+#: The shell program to execute. The default value of . means to use
+#: whatever shell is set as the default shell for the current user.
+#: Note that on macOS if you change this, you might need to add
+#: --login to ensure that the shell starts in interactive mode and
+#: reads its startup rc files.
+
+editor /usr/local/bin/nvim
+
+#: The console editor to use when editing the kitty config file or
+#: similar tasks. A value of . means to use the environment variable
+#: EDITOR. Note that this environment variable has to be set not just
+#: in your shell startup scripts but system-wide, otherwise kitty will
+#: not see it.
+
+# close_on_child_death no
+
+#: Close the window when the child process (shell) exits. If no (the
+#: default), the terminal will remain open when the child exits as
+#: long as there are still processes outputting to the terminal (for
+#: example disowned or backgrounded processes). If yes, the window
+#: will close as soon as the child process exits. Note that setting it
+#: to yes means that any background processes still using the terminal
+#: can fail silently because their stdout/stderr/stdin no longer work.
+
+# allow_remote_control no
+
+#: Allow other programs to control kitty. If you turn this on other
+#: programs can control all aspects of kitty, including sending text
+#: to kitty windows, opening new windows, closing windows, reading the
+#: content of windows, etc. Note that this even works over ssh
+#: connections.
+
+# env
+
+#: Specify environment variables to set in all child processes. Note
+#: that environment variables are expanded recursively, so if you
+#: use::
+
+#:     env MYVAR1=a
+#:     env MYVAR2=${MYVAR}/${HOME}/b
+
+#: The value of MYVAR2 will be a/<path to home directory>/b.
+
+# startup_session none
+
+#: Path to a session file to use for all kitty instances. Can be
+#: overridden by using the kitty --session command line option for
+#: individual instances. See
+#: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty
+#: documentation for details. Note that relative paths are interpreted
+#: with respect to the kitty config directory. Environment variables
+#: in the path are expanded.
+
+# clipboard_control write-clipboard write-primary
+
+#: Allow programs running in kitty to read and write from the
+#: clipboard. You can control exactly which actions are allowed. The
+#: set of possible actions is: write-clipboard read-clipboard write-
+#: primary read-primary The default is to allow writing to the
+#: clipboard and primary selection. Note that enabling the read
+#: functionality is a security risk as it means that any program, even
+#: one running on a remote server via SSH can read your clipboard.
+
+# term xterm-kitty
+term xterm-256color
+
+#: The value of the TERM environment variable to set. Changing this
+#: can break many terminal programs, only change it if you know what
+#: you are doing, not because you read some advice on Stack Overflow
+#: to change it. The TERM variable if used by various programs to get
+#: information about the capabilities and behavior of the terminal. If
+#: you change it, depending on what programs you run, and how
+#: different the terminal you are changing it to is, various things
+#: from key-presses, to colors, to various advanced features may not
+#: work.
+
+#: }}}
+
+#: OS specific tweaks {{{
+
+# macos_titlebar_color system
+
+#: Change the color of the kitty window's titlebar on macOS. A value
+#: of system means to use the default system color, a value of
+#: background means to use the background color of the currently
+#: active window and finally you can use an arbitrary color, such as
+#: #12af59 or red. WARNING: This option works by using a hack, as
+#: there is no proper Cocoa API for it. It sets the background color
+#: of the entire window and makes the titlebar transparent. As such it
+#: is incompatible with background_opacity. If you want to use both,
+#: you are probably better off just hiding the titlebar with
+#: macos_hide_titlebar.
+
+# macos_hide_titlebar no
+
+#: Hide the kitty window's title bar on macOS.
+
+# x11_hide_window_decorations no
+
+#: Hide the window decorations (title bar and window borders) on X11
+#: and Wayland. Whether this works and exactly what effect it has
+#: depends on the window manager, as it is the job of the window
+#: manager/compositor to draw window decorations.
+
+macos_option_as_alt yes
+
+#: Use the option key as an alt key. With this set to no, kitty will
+#: use the macOS native Option+Key = unicode character behavior. This
+#: will break any Alt+key keyboard shortcuts in your terminal
+#: programs, but you can use the macOS unicode input technique.
+
+# macos_hide_from_tasks no
+
+#: Hide the kitty window from running tasks (Option+Tab) on macOS.
+
+# macos_quit_when_last_window_closed no
+
+#: Have kitty quit when all the top-level windows are closed. By
+#: default, kitty will stay running, even with no open windows, as is
+#: the expected behavior on macOS.
+
+# macos_window_resizable yes
+
+#: Disable this if you want kitty top-level (OS) windows to not be
+#: resizable on macOS.
+
+# macos_thicken_font 0
+
+#: Draw an extra border around the font with the given width, to
+#: increase legibility at small font sizes. For example, a value of
+#: 0.75 will result in rendering that looks similar to sub-pixel
+#: antialiasing at common font sizes.
+
+# macos_traditional_fullscreen no
+
+#: Use the traditional full-screen transition, that is faster, but
+#: less pretty.
+
+macos_custom_beam_cursor yes
+
+#: Enable/disable custom mouse cursor for macOS that is easier to see
+#: on both light and dark backgrounds. WARNING: this might make your
+#: mouse cursor invisible on dual GPU machines.
+
+#: }}}
+
+#: Keyboard shortcuts {{{
+
+#: For a list of key names, see: GLFW keys
+#: <http://www.glfw.org/docs/latest/group__keys.html>. The name to use
+#: is the part after the GLFW_KEY_ prefix. For a list of modifier
+#: names, see: GLFW mods
+#: <http://www.glfw.org/docs/latest/group__mods.html>
+
+#: On Linux you can also use XKB key names to bind keys that are not
+#: supported by GLFW. See XKB keys
+#: <https://github.com/xkbcommon/libxkbcommon/blob/master/xkbcommon/xkbcommon-keysyms.h>
+#: for a list of key names. The name to use is the part after the XKB_KEY_
+#: prefix. Note that you should only use an XKB key name for keys that are not
+#: present in the list of GLFW keys.
+
+#: Finally, you can use raw system key codes to map keys. To see the
+#: system key code for a key, start kitty with the kitty --debug-
+#: keyboard option. Then kitty will output some debug text for every
+#: key event. In that text look for ``native_code`` the value of that
+#: becomes the key name in the shortcut. For example:
+
+#: .. code-block:: none
+
+#:     on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a'
+
+#: Here, the key name for the A key is 0x61 and you can use it with::
+
+#:     map ctrl+0x61 something
+
+#: to map ctrl+a to something.
+
+#: You can use the special action no_op to unmap a keyboard shortcut
+#: that is assigned in the default configuration.
+
+#: You can combine multiple actions to be triggered by a single
+#: shortcut, using the syntax below::
+
+#:     map key combine <separator> action1 <separator> action2 <separator> action3 ...
+
+#: For example::
+
+#:     map kitty_mod+e combine : new_window : next_layout
+
+#: this will create a new window and switch to the next available
+#: layout
+
+#: You can use multi-key shortcuts using the syntax shown below::
+
+#:     map key1>key2>key3 action
+
+#: For example::
+
+#:     map ctrl+f>2 set_font_size 20
+
+# kitty_mod ctrl+shift
+
+#: The value of kitty_mod is used as the modifier for all default
+#: shortcuts, you can change it in your kitty.conf to change the
+#: modifiers for all the default shortcuts.
+
+# clear_all_shortcuts no
+
+#: You can have kitty remove all shortcut definition seen up to this
+#: point. Useful, for instance, to remove the default shortcuts.
+
+#: Clipboard {{{
+
+# map cmd+c        copy_to_clipboard
+# map kitty_mod+c  copy_to_clipboard
+# map cmd+v        paste_from_clipboard
+# map kitty_mod+v  paste_from_clipboard
+# map kitty_mod+s  paste_from_selection
+# map shift+insert paste_from_selection
+# map kitty_mod+o  pass_selection_to_program
+
+#: You can also pass the contents of the current selection to any
+#: program using pass_selection_to_program. By default, the system's
+#: open program is used, but you can specify your own, for example::
+
+#:     map kitty_mod+o pass_selection_to_program firefox
+
+#: You can pass the current selection to a terminal program running in
+#: a new kitty window, by using the @selection placeholder::
+
+#:     map kitty_mod+y new_window less @selection
+
+#: }}}
+
+#: Scrolling {{{
+
+# map kitty_mod+up        scroll_line_up
+# map kitty_mod+k         scroll_line_up
+# map kitty_mod+down      scroll_line_down
+# map kitty_mod+j         scroll_line_down
+# map kitty_mod+page_up   scroll_page_up
+# map kitty_mod+page_down scroll_page_down
+# map kitty_mod+home      scroll_home
+# map kitty_mod+end       scroll_end
+# map kitty_mod+h         show_scrollback
+
+#: You can pipe the contents of the current screen + history buffer as
+#: STDIN to an arbitrary program using the ``pipe`` function. For
+#: example, the following opens the scrollback buffer in less in an
+#: overlay window::
+
+#:     map f1 pipe @ansi overlay less +G -R
+
+#: Placeholders available are: @text (which is plain text) and @ansi
+#: (which includes text styling escape codes). For only the current
+#: screen, use @screen or @ansi_screen. For the secondary screen, use
+#: @alternate and @ansi_alternate. The secondary screen is the screen
+#: not currently displayed. For example if you run a fullscreen
+#: terminal application, the secondary screen will be the screen you
+#: return to when quitting the application. You can also use ``none``
+#: for no STDIN input.
+
+#: To open in a new window, tab or new OS window, use ``window``,
+#: ``tab``, or ``os_window`` respectively. You can also use ``none``
+#: in which case the data will be piped into the program without
+#: creating any windows, useful if the program is a GUI program that
+#: creates its own windows.
+
+#: }}}
+
+#: Window management {{{
+
+# map kitty_mod+enter new_window
+
+#: You can open a new window running an arbitrary program, for
+#: example::
+
+#:     map kitty_mod+y      new_window mutt
+
+#: You can open a new window with the current working directory set to
+#: the working directory of the current window using::
+
+#:     map ctrl+alt+enter    new_window_with_cwd
+
+#: You can open a new window that is allowed to control kitty via the
+#: kitty remote control facility by prefixing the command line with @.
+#: Any programs running in that window will be allowed to control
+#: kitty. For example::
+
+#:     map ctrl+enter new_window @ some_program
+
+# map cmd+n       new_os_window
+# map kitty_mod+n new_os_window
+# map kitty_mod+w close_window
+# map kitty_mod+] next_window
+# map kitty_mod+[ previous_window
+# map kitty_mod+f move_window_forward
+# map kitty_mod+b move_window_backward
+# map kitty_mod+` move_window_to_top
+# map kitty_mod+r start_resizing_window
+# map kitty_mod+1 first_window
+# map kitty_mod+2 second_window
+# map kitty_mod+3 third_window
+# map kitty_mod+4 fourth_window
+# map kitty_mod+5 fifth_window
+# map kitty_mod+6 sixth_window
+# map kitty_mod+7 seventh_window
+# map kitty_mod+8 eighth_window
+# map kitty_mod+9 ninth_window
+# map kitty_mod+0 tenth_window
+#: }}}
+
+#: Tab management {{{
+
+# map ctrl+tab        next_tab
+# map kitty_mod+right next_tab
+# map ctrl+shift+tab  previous_tab
+# map kitty_mod+left  previous_tab
+# map kitty_mod+t     new_tab
+# map kitty_mod+q     close_tab
+# map kitty_mod+.     move_tab_forward
+# map kitty_mod+,     move_tab_backward
+# map kitty_mod+alt+t set_tab_title
+
+#: You can also create shortcuts to go to specific tabs, with 1 being
+#: the first tab::
+
+#:     map ctrl+alt+1 goto_tab 1
+#:     map ctrl+alt+2 goto_tab 2
+
+#: Just as with new_window above, you can also pass the name of
+#: arbitrary commands to run when using new_tab and use
+#: new_tab_with_cwd. Finally, if you want the new tab to open next to
+#: the current tab rather than at the end of the tabs list, use::
+
+#:     map ctrl+t new_tab !neighbor [optional cmd to run]
+#: }}}
+
+#: Layout management {{{
+
+# map kitty_mod+l next_layout
+
+#: You can also create shortcuts to switch to specific layouts::
+
+#:     map ctrl+alt+t goto_layout tall
+#:     map ctrl+alt+s goto_layout stack
+
+#: Similarly, to switch back to the previous layout::
+
+#:    map ctrl+alt+p last_used_layout
+#: }}}
+
+#: Font sizes {{{
+
+#: You can change the font size for all top-level kitty windows at a
+#: time or only the current one.
+
+# map kitty_mod+equal     change_font_size all +2.0
+# map kitty_mod+minus     change_font_size all -2.0
+# map kitty_mod+backspace change_font_size all 0
+
+#: To setup shortcuts for specific font sizes::
+
+#:     map kitty_mod+f6 change_font_size all 10.0
+
+#: To setup shortcuts to change only the current window's font size::
+
+#:     map kitty_mod+f6 change_font_size current 10.0
+#: }}}
+
+#: Select and act on visible text {{{
+
+#: Use the hints kitten to select text and either pass it to an
+#: external program or insert it into the terminal or copy it to the
+#: clipboard.
+
+# map kitty_mod+e kitten hints
+
+#: Open a currently visible URL using the keyboard. The program used
+#: to open the URL is specified in open_url_with.
+
+# map kitty_mod+p>f kitten hints --type path --program -
+
+#: Select a path/filename and insert it into the terminal. Useful, for
+#: instance to run git commands on a filename output from a previous
+#: git command.
+
+# map kitty_mod+p>shift+f kitten hints --type path
+
+#: Select a path/filename and open it with the default open program.
+
+# map kitty_mod+p>l kitten hints --type line --program -
+
+#: Select a line of text and insert it into the terminal. Use for the
+#: output of things like: ls -1
+
+# map kitty_mod+p>w kitten hints --type word --program -
+
+#: Select words and insert into terminal.
+
+# map kitty_mod+p>h kitten hints --type hash --program -
+
+#: Select something that looks like a hash and insert it into the
+#: terminal. Useful with git, which uses sha1 hashes to identify
+#: commits
+
+
+#: The hints kitten has many more modes of operation that you can map
+#: to different shortcuts. For a full description see kittens/hints.
+#: }}}
+
+#: Miscellaneous {{{
+
+# map kitty_mod+f11    toggle_fullscreen
+# map kitty_mod+u      kitten unicode_input
+# map kitty_mod+f2     edit_config_file
+# map kitty_mod+escape kitty_shell window
+
+#: Open the kitty shell in a new window/tab/overlay/os_window to
+#: control kitty using commands.
+
+# map kitty_mod+a>m    set_background_opacity +0.1
+# map kitty_mod+a>l    set_background_opacity -0.1
+# map kitty_mod+a>1    set_background_opacity 1
+# map kitty_mod+a>d    set_background_opacity default
+# map kitty_mod+delete clear_terminal reset active
+
+#: You can create shortcuts to clear/reset the terminal. For example::
+
+#:     map kitty_mod+f9 clear_terminal reset active
+#:     map kitty_mod+f10 clear_terminal clear active
+#:     map kitty_mod+f11 clear_terminal scrollback active
+
+#: These will reset screen/clear screen/clear screen+scrollback
+#: respectively. If you want to operate on all windows instead of just
+#: the current one, use all instead of :italic`active`.
+
+
+#: You can tell kitty to send arbitrary (UTF-8) encoded text to the
+#: client program when pressing specified shortcut keys. For example::
+
+#:     map ctrl+alt+a send_text all Special text
+
+#: This will send "Special text" when you press the ctrl+alt+a key
+#: combination.  The text to be sent is a python string literal so you
+#: can use escapes like \x1b to send control codes or \u21fb to send
+#: unicode characters (or you can just input the unicode characters
+#: directly as UTF-8 text). The first argument to send_text is the
+#: keyboard modes in which to activate the shortcut. The possible
+#: values are normal or application or kitty or a comma separated
+#: combination of them.  The special keyword all means all modes. The
+#: modes normal and application refer to the DECCKM cursor key mode
+#: for terminals, and kitty refers to the special kitty extended
+#: keyboard protocol.
+
+#: Another example, that outputs a word and then moves the cursor to
+#: the start of the line (same as pressing the Home key)::
+
+#:     map ctrl+alt+a send_text normal Word\x1b[H
+#:     map ctrl+alt+a send_text application Word\x1bOH
+
+#: }}}
+
+# }}}