- [BUGFIX] Fix amplification mitigation in 0-RTT case.
- [BUGFIX] IETF mini connection should not tickable if cannot send
a packet due to amplification.
- [BUGFIX] Fail if active_connection_id_limit TP is smaller than 2.
- [BUGFIX] Qlog server certificates for IETF QUIC connections.
- [BUGFIX] Uninitialized struct padding usage in tokgen (benign).
- [BUGFIX] Incorrect argument to shi_lookup() (benign).
- [BUGFIX] In coalesced datagram, ignore packets whose CID does not match.
- [BUGFIX] Frame reader: skip headers if target stream is not found.
- [BUGFIX] Log message in QPACK decoder handler.
- [BUGFIX] Heed es_rw_once for pushed HTTP/3 streams.
- [BUGFIX] IETF client: set correct flags on bidirectional streams.
- [BUGFIX] Generate Cancel Stream QPACK instructions for abandoned
streams.
- [BUGFIX] Do not call header callbacks after stream is closed.
- Use ls-qpack 2.1.1
- [BUGFIX] Place connections on tickable queue when sending is reenabled.
- [BUGFIX] A connection is tickable if it has unsent packets.
- [BUGFIX] Heed peer's max_packet_size transport parameter.
- [API] Use lsxpack_header structure to process incoming headers.
- [BUGFIX] Fix assertion when zero-padding Initial packet.
- [BUGFIX] Use idle timeout before we learn of peer's value.
- Use ls-hpack 2.0.0 -- has lsxpack_header changes.
- Use ls-qpack 0.14.0 -- new, common with ls-hpack, XXH seed (not used yet).
- Code cleanup: prefix exported functions with "lsquic_".
- [FEATURE] QUIC and HTTP/3 Internet Draft 27 support.
- [FEATURE] Add experimental delayed ACKs extension.
- Drop support for Internet Draft 24.
- Code cleanup.
- [FEATURE] QUIC and HTTP/3 Internet Draft 25 support.
- [API] Drop support for ID-23.
- [BUGFIX] Set key phase bit on outgoing packets correctly.
- Code cleanup.
- [API] Drop support for Q039.
- Improve ACK-queuing logic. Send an ACK once in a while if
peer keeps on sending non-ack-eliciting packets.
- Improve Alt-Svc string: Q050 and later are not included in
the old-style "quic" string.
- Send stateless resets if connection could not be promoted.
- Schedule MAX_DATA if needed when DATA_BLOCKED is received.
- Use ls-qpack 0.11.2 -- needed for server push optimization.
- Code cleanup: handle some error cases, improve logging.
- [BUGFIX] Invalid read when parsing IETF transport parameters
(this was benign).
- [OPTIMIZATION] Frame bundling when using buffered packets in
IETF QUIC: a) flush QPACK decoder stream and b) include ACKs
in opportunistic fashion.
- Fix HTTP/3 framing unit test.
- Code cleanup.
- [BUGFIX] Initial packet size check for IETF mini conn applies to
UDP payload, not QUIC packet.
- Support old and new school loss_bits transport parameter.
- Use Q run length of 64 as suggested in the loss bits Draft.
- Undo square wave count when packet is delayed.
- Code cleanup; minor fixes.
- [FEATURE] Use occasional packet number gaps to detect optimistic
ACK attacks.
- [BUGFIX] Q050 client: all packet numbers are in the App PNS.
- [OPTIMIZATION] Merge multi-range ACK frames, not just single-range
ACK frames.
- IETF QUIC: use RTT estimate in ack timeout calculation.
- IETF handshake: abort conn when unexpected errors occur.
- Use PING rather than MAX_DATA frames to elicit ACKs from peer.
- Server: enforce 1200 byte Initial minimum packet size.
- [CLEANUP] Remove code to disable gQUIC crypto.
- [CLEANUP] Remove n_timestamps from ACK info struct.
- Optimize driver: reuse previous ancillary message when possible.
- [FEATURE] Add support for Q050.
- [OPTIMIZATION] Reduce mallocs in gQUIC handshake.
- [BUGFIX] Disable redo of failed STREAM frame insertion with debug
logging.
- [BUGFIX] Send controller: update scheduled bytes when DCID length
changes (IETF client).
- [BUGFIX] Drop alarm check from sanity test. It no longer works now
that we use loss chains.
- [PORTABILITY] Fix build on Alpine Linux.
- [PORTABILITY] Fix build using XCode.
- Client initial DCID length: use RAND_bytes() instead of rand(3).
- Add unit tests for connection min heap.
- [DEBUG] Log CID in gQUIC handshake module
- [DEBUG] Turn on extra checks for IETF client send controller.
- [DEBUG] Dedup next advisory tick messages when reason is IDLE timer.
- [DEBUG] QPACK decoder handler: log header error code.
- [API] lsquic_engine_connect() can now be passed QUIC version to use.
- [OPTIMIZATION] Queue opportunistic ACKs if there is data to be sent.
- [BUGFIX] Don't evict streams from priority iterator if there is
only one queue.
- [OPTIMIZATION, BUGFIX] Several other optimizations and bug fixes.
- Use ls-qpack v0.10.7.
- Add echo client and server to the distibution.
- Add MD5 client and server to the distibution.
- Fix http_client: check command-line arguments better, prevent crash.
- Fix IETF conn: can_write_ack() should only care about APP PNS.
- Client: delay stream creation until handshake succeds.
- Reset HTTP stream whose write end is closed prematurely.
- Fix tickable(): mirror behavior of tick() wrt buffered packets.
- Log reason why engine is tickable.
- Minor code cleanup and logging improvements.
- Server and client programs: include library version (e.g. 2.4.6)
into `server' and `user-agent' headers.
- [OPTIMIZATION]: flush encoder stream only when necessary.
- [BUGFIX] Use ls-qpack v0.10.2 for new API -- and for a bug fix.
- [BUGFIX] Typo in IETF conn SETTINGS writer.
- Use latest BoringSSL.
- [API] Add lsquic_alpn2ver() to aid parsing Alt-Svc header.
- [BUGFIX] NULL dereference when H3 frame header would be split.
- [BUGFIX] Do not close fixed-size H3 frame prematurely.
- [BUGFIX] Allow PING frames in IETF mini conn.
- [BUGFIX] Mini conns: don't send any packets after receiving
CONNECTION_CLOSE.
- [BUGFIX] Client migration: reserve slot for DCID from transport params.
- [BUGFIX] Allow max_early_data_size=0 -- early_data might not be there.
- [BUGFIX] Use an invalid stream number to reset BPT cache (zero is now a
valid stream number).
- [SPEC] Use FINAL_SIZE_ERROR when FIN mismatch is detected.
- [OPTIMIZATION] Closed connection only gets one chance to send packets.
- [OPTIMIZATION] Flush headers stream before packetizing stream data.
- [OPTIMIZATION] process QPACK encoder STREAM frames immediately.
- Update ls-qpack to v0.10.1.
- [BUGFIX] H3 framing: fix zero-byte write when space is available
- [BUGFIX] Don't send STREAM frame when incoming unidirectgional stream
is closed
- [BUGFIX] Cancel all pending writes by stream reset by a GOAWAY
- [BUGFIX] Fix use-after-free in IETF full conn
- [OPTIMIZATION] Wait for session tickets for two seconds and then drop
SSL object and crypto streams.
- [BUGFIX] If FIN or RST not received, don't delay stream destruction.
- [OPTIMIZATION] Speed up HPACK encoder by using same hash value to
search static and dynamic tables.
- [FEATURE, API Change] 0-RTT support. Add function to export 0-RTT
information; it can be supplied to a subsequent connect() call.
- [FEATURE] Add -0 flag to http_client to exercise 0-RTT support.
- [BUGFIX] Resuscitate the Windows build.
- [BUGFIX] Send HTTP settings (max header list size) if necessary.
- [BUGFIX] Buffered packets can contain ACK frames.
- [BUGFIX] Make packet writeable once all STREAM frames are elided.
- [BUGFIX] Fix potential null dereference when realloc fails.
- cmake: simplify build configuration.
- [BUGFIX] http_client: make sure only one read per on_read() callback
is performed in the header conversion bypass (-B) mode.
- http_client: with -E, assign random priority when stream is created.
- [OPTIMIZATION] On immediate write, place an ACK frame into the first
buffered packet if an ACK is queued. This reduces the number of
standalone ACK packets.
- [OPTIMIZATION] Allow placing more than one STREAM frame from the same
stream into an outgoing packet. This change minimizes the number of
buffered packets required to store several small HTTP messages by
virtue of allowing more than one STREAM frame from HEADERS stream in
the same packet.
- [OPTIMIZATION] Flush headers when writing to buffered packets. This
causes the headers to be written to the same buffered packet queue,
thereby improving packet utilization, especially for small HTTP
messages.
- [FEATURE] http_client can now collect stats: time to connect, TTFB,
time to download, requests per seconds, and bandwidth. See -t flag.
- [BUGFIX] http_client: -B, -K, and -r can be used at the same time.
- [BUGFIX] http_client: do not display cert chain before each request.
Now this is only done once per connection, if the handshake is
successful and -a option is given.
- [BUGFIX] Do not wait to dispatch on_close() after reading. If a
stream is scheduled to be closed after on_read() callback returns,
close it immediately instead of waiting until the end of the tick.
If client creates new request from on_close() event, they will be
processed in the same tick instead of waiting for the next one.
- [BUGFIX] HEADERS stream is critical: always treat it with highest
priority.
- [API Change] Packet out Memory Interface (PMI) update:
- Split PMI pool return into pmi_release and pmi_return
- PMI callbacks take peer_ctx and is_ipv6 arguments
- [BUGFIX] Fix use-after-free when certificate is updated
- Silence gcc warning in optimized mode by performing useless
initialization
- cmake: use the standard variable CMAKE_BUILD_TYPE instead of
DEVEL_MODE
- [API Change] Disable packet sending if full batch cannot be sent
If lsquic_packets_out_f() cannot send the whole batch, disable
packet sending until lsquic_engine_send_unsent_packets() is called.
- [BUGFIX] Handle case when STREAM frame does not fit.
- [BUGFIX] Always allow incoming STREAM frames to overlap. Peers
may send overlapping STREAM frames even if using versions older
than Q043.
- Custom header set fixes:
- set "FIN reached" flag when custom header with FIN flag is
claimed;
- do not return custom header set for a reset stream.
Add ability to create custom header set objects via callbacks.
This avoids reading and re-parsing headers from the stream.
See test/http_client.c for example implementation. (Use -B flag
to turn it on).