wownero/contrib/gitian/README.md

Gitian building

Setup instructions for a Gitian build of Monero using a VM or physical system.

Gitian is the deterministic build process that is used to build the Monero CLI executables. It provides a way to be reasonably sure that the executables are really built from the git source. It also makes sure that the same, tested dependencies are used and statically built into the executable.

Multiple developers build the source code by following a specific descriptor ("recipe"), cryptographically sign the result, and upload the resulting signature. These results are compared and only if they match, the build is accepted and provided for download.

More independent Gitian builders are needed, which is why this guide exists. It is preferred you follow these steps yourself instead of using someone else's VM image to avoid 'contaminating' the build.

Table of Contents

Please note that these instructions have been forked from bitcoin's gitian build instructions. Please also consult their documentation, when running into problems. The signing is left as inherited from bitcoin at the moment.

• Preparing the Gitian builder host
• Getting and building the inputs
• Building Binaries
• Signing externally
• Uploading signatures

Preparing the Gitian builder host

The first step is to prepare the host environment that will be used to perform the Gitian builds. This guide explains how to set up the environment, and how to start the builds.

Gitian builds are for now executed on Ubuntu 18.04 "Bionic Beaver". A solution is being worked on to run it in docker in the future. Please run Ubuntu in either a VM, or on your physical machine. You need to be logged in as the gitianuser in order to build gitian builds. If this user does not exist yet on your system, create it.

Note that a version of lxc-execute higher or equal to 2.1.1 is required. You can check the version with lxc-execute --version.

First we need to set up dependencies. Type/paste the following in the terminal:

sudo apt-get install git ruby apt-cacher-ng qemu-utils debootstrap lxc python-cheetah parted kpartx bridge-utils make ubuntu-archive-keyring curl firewalld

Then set up LXC and the rest with the following, which is a complex jumble of settings and workarounds:

sudo -s
# the version of lxc-start in Debian needs to run as root, so make sure
# that the build script can execute it without providing a password
echo "%sudo ALL=NOPASSWD: /usr/bin/lxc-start" > /etc/sudoers.d/gitian-lxc
echo "%sudo ALL=NOPASSWD: /usr/bin/lxc-execute" >> /etc/sudoers.d/gitian-lxc
# make /etc/rc.local script that sets up bridge between guest and host
echo '#!/bin/sh -e' > /etc/rc.local
echo 'brctl addbr br0' >> /etc/rc.local
echo 'ip addr add 10.0.3.1/24 broadcast 10.0.3.255 dev br0' >> /etc/rc.local
echo 'ip link set br0 up' >> /etc/rc.local
echo 'firewall-cmd --zone=trusted --add-interface=br0' >> /etc/rc.local
echo 'exit 0' >> /etc/rc.local
chmod +x /etc/rc.local
# make sure that USE_LXC is always set when logging in as gitianuser,
# and configure LXC IP addresses
echo 'export USE_LXC=1' >> /home/gitianuser/.profile
echo 'export GITIAN_HOST_IP=10.0.3.1' >> /home/gitianuser/.profile
echo 'export LXC_GUEST_IP=10.0.3.5' >> /home/gitianuser/.profile
reboot

This setup is required to enable networking in the container.

Manual and Building

The instructions below use the automated script gitian-build.py which only works in Ubuntu. It calls all available descriptors. Help for the build steps taken can be accessed with ./gitian-build.py --help.

Initial Gitian Setup

The gitian-build.py script will checkout different release tags, so it's best to copy it:

cp monero/contrib/gitian/gitian-build.py .

Setup the required environment, you only need to do this once:

./gitian-build.py --setup fluffypony 0.14.0

Where fluffypony is your Github name and 0.14.0 is the version tag you want to build (without v).

While gitian and this build script does provide a way for you to sign the build directly, it is recommended to sign in a seperate step. This script is only there for convenience. Seperate steps for building can still be taken. In order to sign gitian builds on your host machine, which has your PGP key, fork the gitian.sigs repository and clone it on your host machine, or pass the signed assert file back to your build machine.

git clone git@github.com:monero-project/gitian.sigs.git
git remote add fluffypony git@github.com:fluffypony/gitian.sigs.git

Build Binaries

To build the most recent tag:

./gitian-build.py --detach-sign --no-commit -b fluffypony 0.14.0

To speed up the build, use -j 5 -m 5000 as the first arguments, where 5 is the number of CPU's you allocated to the VM plus one, and 5000 is a little bit less than then the MB's of RAM you allocated. If there is memory corruption on your machine, try to tweak these values.

If all went well, this produces a number of (uncommited) .assert files in the gitian.sigs repository.

If you do detached, offline signing, you need to copy these uncommited changes to your host machine, where you can sign them. For example:

export NAME=fluffypony
export VERSION=0.14
gpg --output $VERSION-linux/$NAME/monero-linux-$VERSION-build.assert.sig --detach-sign $VERSION-linux/$NAME/monero-linux-$VERSION-build.assert
gpg --output $VERSION-osx-unsigned/$NAME/monero-osx-$VERSION-build.assert.sig --detach-sign $VERSION-osx-unsigned/$NAME/monero-osx-$VERSION-build.assert
gpg --output $VERSION-win-unsigned/$NAME/monero-win-$VERSION-build.assert.sig --detach-sign $VERSION-win-unsigned/$NAME/monero-win-$VERSION-build.assert

Make a pull request (both the .assert and .assert.sig files) to the monero-project/gitian.sigs repository:

git checkout -b 0.14.0
git commit -S -a -m "Add $NAME 0.14.0"
git push --set-upstream $NAME 0.14.0

    gpg --detach-sign ${VERSION}-linux/${SIGNER}/monero-linux-*-build.assert
    gpg --detach-sign ${VERSION}-win-unsigned/${SIGNER}/monero-win-*-build.assert
    gpg --detach-sign ${VERSION}-osx-unsigned/${SIGNER}/monero-osx-*-build.assert