1
0
Fork 0
mirror of git://git.psyced.org/git/psyced synced 2024-08-15 03:25:10 +00:00
psyced/world/net/irc/reply.h
2009-01-26 21:12:53 +01:00

331 lines
15 KiB
C

// $Id: reply.h,v 1.10 2008/07/27 21:27:07 lynx Exp $ // vim:syntax=lpc
//
// many useful and broken numerics have been added since the IRC RFCs
// were written. http://www.alien.net.au/irc/irc2numerics.html provides
// some orientation. we are implementing some things on experimental
// basis and only on prescription by adding -DIRC_BEYOND_RFC to your
// ldmud flags or #define IRC_BEYOND_RFC to your local.h
#ifdef IRC_BEYOND_RFC
// nothing right now.
#endif
#ifndef IRC_STRICTLY_RFC
# define RPL_ISUPPORT "005" // the de facto standard for server2client
// settings
#endif
// added manually. not in RFC 1459.
#define RPL_CHANNELMODEUNKNOWN "472" // Unsupported MODE
// automatically extracted from RFC 1459, chapter 6. thanks sique.
#define RPL_USERHOST "302" // Reply format used by USERHOST to list
// replies to the query list. The reply
// string is composed as follows: <reply>
// ::= <nick>['*'] '=' <'+'|'-'><hostname>
// The '*' indicates whether the client has
// registered as an Operator. The '-' or
// '+' characters represent whether the
// client has set an AWAY message or not
// respectively.
#define RPL_ISON "303" // Reply format used by ISON to list
// replies to the query list.
#define RPL_AWAY "301" // These replies are used with the AWAY
#define RPL_UNAWAY "305" // command (if allowed). RPL_AWAY is sent
#define RPL_NOWAWAY "306" // to any client sending a PRIVMSG to a
// client which is away. RPL_AWAY is only
// sent by the server to which the client
// is connected. Replies RPL_UNAWAY and
// RPL_NOWAWAY are sent when the client
// removes and sets an AWAY message.
#define RPL_WHOISUSER "311" // Replies 311 - 313, 317 - 319 are all
#define RPL_WHOISSERVER "312" // replies generated in response to a
#define RPL_WHOISOPERATOR "313" // WHOIS message. Given that there are
#define RPL_WHOISIDLE "317" // enough parameters present, the answering
#define RPL_ENDOFWHOIS "318" // server must either formulate a reply out
#define RPL_WHOISCHANNELS "319" // of the above numerics (if the query nick
// is found) or return an error reply.
// The '*' in RPL_WHOISUSER is there as
// the literal character and not as a wild
// card. For each reply set, only
// RPL_WHOISCHANNELS may appear more than
// once (for long lists of channel names).
// The '@' and '+' characters next to the
// channel name indicate whether a client
// is a channel operator or has been granted
// permission to speak on a moderated
// channel. The RPL_ENDOFWHOIS reply is
// used to mark the end of processing a
// WHOIS message.
#define RPL_WHOWASUSER "314" // When replying to a WHOWAS message, a
#define RPL_ENDOFWHOWAS "369" // server must use the replies
// RPL_WHOWASUSER, RPL_WHOISSERVER or
// ERR_WASNOSUCHNICK for each nickname in
// the presented list. At the end of all
// reply batches, there must be
// RPL_ENDOFWHOWAS (even if there was only
// one reply and it was an error).
#define RPL_LISTSTART "321" // Replies RPL_LISTSTART, RPL_LIST,
#define RPL_LIST "322" // RPL_LISTEND mark the start, actual
#define RPL_LISTEND "323" // replies with data and end of the
// server's response to a LIST command. If
// there are no channels available to
// return, only the start and end reply
// must be sent.
#define RPL_CHANNELMODEIS "324" // When sending a TOPIC message to
#define RPL_NOTOPIC "331" // determine the channel topic, one of two
#define RPL_TOPIC "332" // replies is sent. If the topic is set,
// RPL_TOPIC is sent back else RPL_NOTOPIC.
// ... we also employ "333" for delivering author and timestamp
#define RPL_INVITING "341" // Returned by the server to indicate that
// the attempted INVITE message was
// successful and is being passed onto the
// end client.
#define RPL_SUMMONING "342" // Returned by a server answering a SUMMON
// message to indicate that it is summoning
// that user.
#define RPL_VERSION "351" // Reply by the server showing its version
// details. The <version> is the version of
// the software being used (including any
// patchlevel revisions) and the
// <debuglevel> is used to indicate if the
// server is running in "debug mode". The
// "comments" field may contain any
// comments about the version or further
// version details.
#define RPL_WHOREPLY "352" // The RPL_WHOREPLY and RPL_ENDOFWHO pair
#define RPL_ENDOFWHO "315" // are used to answer a WHO message. The
// RPL_WHOREPLY is only sent if there is an
// appropriate match to the WHO query. If
// there is a list of parameters supplied
// with a WHO message, a RPL_ENDOFWHO must
// be sent after processing each list item
// with <name> being the item.
#define RPL_NAMREPLY "353" // To reply to a NAMES message, a reply
#define RPL_ENDOFNAMES "366" // pair consisting of RPL_NAMREPLY and
// RPL_ENDOFNAMES is sent by the server
// back to the client. If there is no
// channel found as in the query, then only
// RPL_ENDOFNAMES is returned. The
// exception to this is when a NAMES
// message is sent with no parameters and
// all visible channels and contents are
// sent back in a series of RPL_NAMEREPLY
// messages with a RPL_ENDOFNAMES to mark
// the end.
#define RPL_LINKS "364" // In replying to the LINKS message, a
#define RPL_ENDOFLINKS "365" // server must send replies back using the
// RPL_LINKS numeric and mark the end of
// the list using an RPL_ENDOFLINKS reply.
#define RPL_BANLIST "367" // When listing the active 'bans' for a
#define RPL_ENDOFBANLIST "368" // given channel, a server is required to
// send the list back using the RPL_BANLIST
// and RPL_ENDOFBANLIST messages. A
// separate RPL_BANLIST is sent for each
// active banid. After the banids have been
// listed (or if none present) a
// RPL_ENDOFBANLIST must be sent.
#define RPL_INFO "371" // A server responding to an INFO message
#define RPL_ENDOFINFO "374" // is required to send all its 'info' in a
// series of RPL_INFO messages with a
// RPL_ENDOFINFO reply to indicate the end
// of the replies.
#define RPL_MOTDSTART "375" // When responding to the MOTD message and
#define RPL_MOTD "372" // the MOTD file is found, the file is
#define RPL_ENDOFMOTD "376" // displayed line by line, with each line
// no longer than 80 characters, using
// RPL_MOTD format replies. These should be
// surrounded by a RPL_MOTDSTART (before
// the RPL_MOTDs) and an RPL_ENDOFMOTD
// (after).
#define RPL_YOUREOPER "381" // RPL_YOUREOPER is sent back to a client
// which has just successfully issued an
// OPER message and gained operator status.
#define RPL_REHASHING "382" // If the REHASH option is used and an
// operator sends a REHASH message, an
// RPL_REHASHING is sent back to the
// operator.
#define RPL_TIME "391" // When replying to the TIME message, a
// server must send the reply using the
// RPL_TIME format above. The string
// showing the time need only contain the
// correct day and time there. There is no
// further requirement for the time string.
#define RPL_USERSSTART "392" // If the USERS message is handled by a
#define RPL_USERS "393" // server, the replies RPL_USERSTART,
#define RPL_ENDOFUSERS "394" // RPL_USERS, RPL_ENDOFUSERS and
#define RPL_NOUSERS "395" // RPL_NOUSERS are used. RPL_USERSSTART
// must be sent first, following by either
// a sequence of RPL_USERS or a single
// RPL_NOUSER. Following this is
// RPL_ENDOFUSERS.
#define RPL_TRACELINK "200" // The RPL_TRACE* are all returned by the
#define RPL_TRACECONNECTING "201" // server in response to the TRACE message.
#define RPL_TRACEHANDSHAKE "202" // How many are returned is dependent on
#define RPL_TRACEUNKNOWN "203" // the the TRACE message and whether it was
#define RPL_TRACEOPERATOR "204" // sent by an operator or not. There is no
#define RPL_TRACEUSER "205" // predefined order for which occurs first.
#define RPL_TRACESERVER "206" // Replies RPL_TRACEUNKNOWN,
#define RPL_TRACENEWTYPE "208" // RPL_TRACECONNECTING and
#define RPL_TRACELOG "261" // RPL_TRACEHANDSHAKE are all used for
// connections which have not been fully
// established and are either unknown,
// still attempting to connect or in the
// process of completing the 'server
// handshake'. RPL_TRACELINK is sent by any
// server which handles a TRACE message and
// has to pass it on to another server. The
// list of RPL_TRACELINKs sent in response
// to a TRACE command traversing the IRC
// network should reflect the actual
// connectivity of the servers themselves
// along that path. RPL_TRACENEWTYPE is to
// be used for any connection which does
// not fit in the other categories but is
// being displayed anyway.
#define RPL_STATSLINKINFO "211"
#define RPL_STATSCOMMANDS "212"
#define RPL_STATSCLINE "213"
#define RPL_STATSNLINE "214"
#define RPL_STATSILINE "215"
#define RPL_STATSKLINE "216"
#define RPL_STATSYLINE "218"
#define RPL_ENDOFSTATS "219"
#define RPL_STATSLLINE "241"
#define RPL_STATSUPTIME "242"
#define RPL_STATSOLINE "243"
#define RPL_STATSHLINE "244"
#define RPL_UMODEIS "221" // To answer a query about a client's own
// mode, RPL_UMODEIS is sent back.
#define RPL_LUSERCLIENT "251" // In processing an LUSERS message, the
#define RPL_LUSEROP "252" // server sends a set of replies from
#define RPL_LUSERUNKNOWN "253" // RPL_LUSERCLIENT, RPL_LUSEROP,
#define RPL_LUSERCHANNELS "254" // RPL_USERUNKNOWN, RPL_LUSERCHANNELS and
#define RPL_LUSERME "255" // RPL_LUSERME. When replying, a server
// must send back RPL_LUSERCLIENT and
// RPL_LUSERME. The other replies are only
// sent back if a non-zero count is found
// for them.
#define RPL_ADMINME "256" // When replying to an ADMIN message, a
#define RPL_ADMINLOC1 "257" // server is expected to use replies
#define RPL_ADMINLOC2 "258" // RPL_ADMINME through to RPL_ADMINEMAIL
#define RPL_ADMINEMAIL "259" // and provide a text message with each.
// For RPL_ADMINLOC1 a description of what
// city, state and country the server is in
// is expected, followed by details of the
// university and department
// (RPL_ADMINLOC2) and finally the
// administrative contact for the server
// (an email address here is required) in
// RPL_ADMINEMAIL.
#if 0
#define REPLY_MSGS ([\
RPL_USERHOST : ":%s",\
RPL_ISON : ":%s",\
RPL_AWAY : "%s :%s",\
RPL_UNAWAY : ":You are no longer marked as being away",\
RPL_NOWAWAY : ":You have been marked as being away",\
RPL_WHOISUSER : "%s %s %s * :%s",\
RPL_WHOISSERVER : "%s %s :%s",\
RPL_WHOISOPERATOR : "%s :is an IRC operator",\
RPL_WHOISIDLE : "%s %s :seconds idle",\
RPL_ENDOFWHOIS : "%s :End of /WHOIS list",\
RPL_WHOISCHANNELS : "%s :%s",\
RPL_WHOWASUSER : "%s %s %s * :%s",\
RPL_ENDOFWHOWAS : "%s :End of WHOWAS",\
RPL_LISTSTART : "Channel :Users Name",\
RPL_LIST : "%s %d :%s",\
RPL_LISTEND : ":End of /LIST",\
RPL_CHANNELMODEIS : "%s %s %s",\
RPL_NOTOPIC : "%s :No topic is set",\
RPL_TOPIC : "%s :%s",\
RPL_INVITING : "%s %s",\
RPL_SUMMONING : "%s :Summoning user to IRC",\
RPL_VERSION : "%d.%d %s :%s",\
RPL_WHOREPLY : "%s %s %s %s %s %s :%d %s",\
RPL_ENDOFWHO : "%s :End of /WHO list",\
RPL_NAMREPLY : "%s :%s",\
RPL_ENDOFNAMES : "%s :End of /NAMES list",\
RPL_LINKS : "<mask> <server> :<hopcount> <server info>",\
RPL_ENDOFLINKS : "<mask> :End of /LINKS list",\
RPL_BANLIST : "<channel> <banid>",\
RPL_ENDOFBANLIST : "",\
RPL_INFO : ":%s",\
RPL_ENDOFINFO : ":End of /INFO list",\
RPL_MOTDSTART : ":- %s Message of the day - ",\
RPL_MOTD : ":- %s",\
RPL_ENDOFMOTD : ":End of /MOTD command",\
RPL_YOUREOPER : ":You are now an IRC operator",\
RPL_REHASHING : "%s :Rehashing",\
RPL_TIME : "",\
RPL_USERSSTART : ":UserID Terminal Host",\
RPL_USERS : ":%-8s %-9s %-8s",\
RPL_ENDOFUSERS : ":End of users",\
RPL_NOUSERS : ":Nobody logged in",\
RPL_TRACELINK : "Link %s %s %s",\
RPL_TRACECONNECTING : "Try. <class> <server>",\
RPL_TRACEHANDSHAKE : "H.S. <class> <server>",\
RPL_TRACEUNKNOWN : "???? <class> [<client IP address in dot form>]",\
RPL_TRACEOPERATOR : "Oper <class> <nick>",\
RPL_TRACEUSER : "User <class> <nick>",\
RPL_TRACESERVER : "Serv <class> <int>S <int>C <server> \
<nick!user|*!*>@<host|server>",\
RPL_TRACENEWTYPE : "<newtype> 0 <client name>",\
RPL_TRACELOG : "File <logfile> <debug level>",\
RPL_STATSLINKINFO : "<linkname> <sendq> <sent messages> \
<sent bytes> <received messages> <received bytes> <time open>",\
RPL_STATSCOMMANDS : "<command> <count>",\
RPL_STATSCLINE : "C <host> * <name> <port> <class>",\
RPL_STATSNLINE : "N <host> * <name> <port> <class>",\
RPL_STATSILINE : "I <host> * <host> <port> <class>",\
RPL_STATSKLINE : "K <host> * <username> <port> <class>",\
RPL_STATSYLINE : "Y <class> <ping frequency> <connect \
frequency> <max sendq>",\
RPL_ENDOFSTATS : "<stats letter> :End of /STATS report",\
RPL_STATSLLINE : "L <hostmask> * <servername> <maxdepth>",\
RPL_STATSUPTIME : ":Server Up %d days %d:%02d:%02d",\
RPL_STATSOLINE : "O <hostmask> * <name>",\
RPL_STATSHLINE : "H <hostmask> * <servername>",\
RPL_UMODEIS : "<user mode string>",\
RPL_LUSERCLIENT : ":There are <integer> users and <integer> \
invisible on <integer> servers",\
RPL_LUSEROP : "<integer> :operator(s) online",\
RPL_LUSERUNKNOWN : "<integer> :unknown connection(s)",\
RPL_LUSERCHANNELS : "<integer> :channels formed",\
RPL_LUSERME : ":I have <integer> clients and <integer> \
servers",\
RPL_ADMINME : "<server> :Administrative info",\
RPL_ADMINLOC1 : ":<admin info>",\
RPL_ADMINLOC2 : ":<admin info>",\
RPL_ADMINEMAIL : ":<admin info>",\
])
#endif