# {{ ansible_managed }}
#
# These rules are for the Captive Portal project.
# by Stefan Midjich - 2016/03

# Routing of traffic requires: sysctl net.ipv4.ip_forward = 1
#
# {{captiveportal_conf.input_nic}} is LAN and used as default route on LAN clients.
# {{captiveportal_conf.output_nic}} is WAN.
# {{captiveportal_conf.webportal_ip}} is the same as IP on {{captiveportal_conf.input_nic}}

# Mangle table allows the marking of traffic. If you use -j RETURN before 
# -j MARK you jump out of the internet chain and your traffic is not marked.
*mangle
:PREROUTING ACCEPT
:INPUT ACCEPT
:OUTPUT ACCEPT
:POSTROUTING ACCEPT

# Create custom chain in mangle table called "internet"
:internet - [0:0]

# Run all traffic from {{captiveportal_conf.input_nic}} through the internet chain
-A PREROUTING -i {{captiveportal_conf.input_nic}} -j internet

# Example to allow authorized clients in by MAC address
#-A internet -m mac --mac-source "xx:xx:xx:xx:56:eb" -j RETURN
# Live example: -I internet 1 -m mac --mac-source "xx:xx:xx:xx:56:eb" -j RETURN
# inserts at the top of the rules before the mark rule.
#
# iptables -t mangle -I internet -m tcp -p tcp --source 1.2.3.4 -j RETURN
# iptables -t mangle -I internet -m udp -p udp --source 1.2.3.4 -j RETURN

# You can also use ipset like this.
# This matches a pre-defined ipset instead of specific addresses, ipset type hash:ip.
#-A internet -m set --match-set {{ipset_whitelist_clients}} src -j RETURN
#-A internet -m set --match-set {{ipset_auth_clients}} src -j RETURN

# These are for mac-addresses, ipset type hash:mac.
#-A internet -m set --match-set {{macset_whitelist_clients}} src -j RETURN
#-A internet -m set --match-set {{macset_auth_clients}} src -j RETURN

# For MGMT SSH traffic return out of internet chain so it's not marked
-A internet -p tcp -d {{captiveportal_conf.webportal_ip}} --dport ssh -j RETURN

# Bypass NTP also
#-A internet -p udp --dport ntp -j RETURN

# Mark all other traffic in the internet chain with 99. Any traffic after
# this rule is marked and blocked.
-A internet -j MARK --set-mark 99

COMMIT

# NAT rules that redirect traffic and allow the portal server to act as gateway.
*nat
:PREROUTING ACCEPT
:INPUT ACCEPT
:OUTPUT ACCEPT
:POSTROUTING ACCEPT

# Redirect all marked HTTP traffic to the webportal IP
-A PREROUTING -m mark --mark 99 -p tcp --dport http -j DNAT --to-destination {{captiveportal_conf.webportal_ip}}
-A PREROUTING -m mark --mark 99 -p tcp --dport https -j DNAT --to-destination {{captiveportal_conf.webportal_ip}}

# Redirect all marked DNS traffic to the webportal IP
-A PREROUTING -m mark --mark 99 -p udp --dport domain -j DNAT --to-destination {{captiveportal_conf.webportal_ip}}
-A PREROUTING -m mark --mark 99 -p tcp --dport domain -j DNAT --to-destination {{captiveportal_conf.webportal_ip}}

# Redirect all ICMP to the webportal IP
-A PREROUTING -m mark --mark 99 -p icmp -j DNAT --to-destination {{captiveportal_conf.webportal_ip}}

# Redirect all unmarked DNS traffic to upstream DNS servers
{% for server in captiveportal_conf.upstream_dns %}
-A PREROUTING -p udp --dport domain -j DNAT --to-destination {{server}}
-A PREROUTING -p tcp --dport domain -j DNAT --to-destination {{server}}
{% endfor %}

# Redirect all unmarked HTTP traffic to upstream Bluecoat
#-A PREROUTING -p tcp --dport http -j DNAT --to 192.168.80.20:8080

# Route any remaining unmarked traffic out through the output NIC to act as gateway
-A POSTROUTING -o {{captiveportal_conf.output_nic}} -j MASQUERADE

COMMIT

# Filter rules that determine access to the portal server.
*filter
:INPUT ACCEPT
:FORWARD ACCEPT
:OUTPUT ACCEPT

# Enable stateful connections
-I OUTPUT -o {{captiveportal_conf.output_nic}} -d 0.0.0.0/0 -j ACCEPT
-I INPUT -i {{captiveportal_conf.input_nic}} -m state --state ESTABLISHED,RELATED -j ACCEPT

# Accept HTTP traffic both to the server and forwarded
-A INPUT -p tcp --dport http -j ACCEPT
-A FORWARD -p tcp --dport http -j ACCEPT

# Accept DNS traffic to self
-A INPUT -p udp --dport domain -j ACCEPT
-A INPUT -p tcp --dport domain -j ACCEPT

# Drop all other traffic marked 99
-A FORWARD -m mark --mark 99 -j DROP
-A INPUT -m mark --mark 99 -j DROP

COMMIT