This file lists any change that has been applied to the en-US translation of
rufus.loc since its original version. Translators are expected to keep their
translations up to date by monitoring this file on regular basis and applying
the same changes.

When editing an existing translation, make sure you always follow:
https://github.com/pbatard/rufus/wiki/Localization#Editing_a_translation

Remember to also update the version number for your translation ('v x.y.z')
once you have matched all the changes that occurred for the en-US translation.

!!IMPORTANT!! The changes below may NOT contain the full message and only tell
you WHERE, in the English translation, you should look to find the full message
content. PLEASE, do not just look at this Changelog when updating your
translation, but always use the English section of rufus.loc as your base.
For instance, MSG_114, that was introduced in v1.0.8 is MORE than one line!

o Version 1.0.22 (2017.07.17)
  - *NEW* MSG_295 "Warning: Unofficial version"
  - *NEW* MSG_296 "This version of Rufus was NOT produced by its official developer(s).\n\nAre you sure you want to run it?"
  - *NEW* MSG_297 "Truncated ISO detected"
  - *NEW* MSG_298 "The ISO file you have selected does not match its declared size: %s of data is missing!\n\nIf you obtained "
    "this file from the Internet, you should try to download a new copy and verify that the MD5 or SHA checksums match the "
    "official ones.\n\nNote that you can compute the MD5 or SHA in Rufus by clicking the '#' button."
  Note: You can test MSG_297/MSG_298 using https://rufus.akeo.ie/testing/arch_trunc.iso (A truncated version of archlinux-2017.07.01-x86_64.iso)

o Version 1.0.21 (2017.01.16)
  - *NEW* MSG_288 "Missing elevated privileges"
  - *NEW* MSG_289 "This application can only run with elevated privileges"
    This message, along with the previous, is just to notify the user when they have
    managed to run Rufus in non-elevated mode. This shouldn't happen in most case
    so this is not something that you can easily test.
  - *NEW* MSG_290 "File Indexing"
    This is a cheat mode that can be tested with Alt-Q, that is equivalent to the
    "Allow files on this drive to have contents indexed in addition to file properties"
    (i.e. file indexing) option one can see when looking at the drive properties. See:
    https://rufus.akeo.ie/pics/FileIndexing.png
  - *NEW* MSG_291 "Version selection"
  - *NEW* MSG_292 "Please select the version of Windows you want to install:"
    These two messages are used when the user has the possibility to select between
    multiple versions of Windows in Windows To Go mode. In this case, a prompt like
    this will appear, using these 2 messages: https://rufus.akeo.ie/pics/Win2GoVersion.png
    If you have an official Windows ISO, and the platform you run Rufus on supports
    Windows To Go (Windows 8 or later *ONLY*), you should be able to test this message.
  - *NEW* MSG_293 "Unsupported Windows version"
  - *NEW* MSG_294 "This version of Windows is no longer supported by Rufus."
    These two messages are not used anywhere yet, but may be needed in a future prompt.

o Version 1.0.20 (2016.05.09)
  - *NEW* MSG_286 "Zeroing drive: %0.1f%% completed"
    Used when filling a whole drive with zero bytes, to display progress in percent (e.g. "Zeroing drive: 12.3% completed")
    Can be tested with Alt-Z (CAUTION: THIS WILL COMPLETELY ERASE THE SELECTED DRIVE!!)
  - *NEW* MSG_287 "Detection of non-USB removable drives"
    Note, this message is followed by either "enabled"/"disabled" (see MSG_250/251) and is similar to MSG_253
    The message appears on the status bar and can be tested with Ctrl-Alt-F.

o Version 1.0.19 (2015.10.15)
    Note: The following message can be tested by pressing Alt-, (That's the 'Alt' and 'comma' keys on your keyboard)
          In case the message below is not clear, you can consider that it says "Exclusive locking of the USB drive"
  - *NEW* MSG_282 "Exclusive USB drive locking"
    Note: The following messages will appear after a new Rufus update has been downloaded from the
          Internet in case something is very wrong with its digital signature...
  - *NEW* MSG_283 "Invalid signature"
  - *NEW* MSG_284 "The downloaded executable is missing a digital signature."
  - *NEW* MSG_285 "The downloaded executable is signed by '%s'.\nThis is not a signature we recognize and could "
                  "indicate some form of malicious activity...\nAre you sure you want to run this file?"

o Version 1.0.18 (2015.09.03)
  - Changed MSG_081 "Unsupported ISO" -> "Unsupported image"
  - Changed MSG_082 -> "This image is either non-bootable, or it uses a boot or compression method that is not supported by Rufus..."
  - *NEW* MSG_269 "Preserve timestamps"
    Note: You can use the Alt-T cheat mode to see this message. Also, if 'timestamp' doesn't really translate in your language,
    "file dates preservation" is a good approximation of what this is about.
  - *NEW* MSG_270 "USB debug"
    Note: You can use the Alt-. cheat mode to see the message above
  For an idea of what the 'checksums' in the 2 messages below are used for, see https://en.wikipedia.org/wiki/Md5sum:
  - *NEW* MSG_271 "Computing image checksums: %0.1f%% completed"
  - *NEW* MSG_272 "Compute the SHA1 and MD5 checksums for the selected image"
  - *NEW* MSG_273 "Change the application language"
    Note: You can see the message above by hovering on the language button
  - *NEW* MSG_274 "ISOHybrid image detected"
    Note: You can test this message and the one below by downloading and trying to write the latest menu_c32_test.iso (120 KB) from:
    https://github.com/pbatard/rufus/raw/master/res/localization/menu_c32_test.iso
	- *NEW* MSG_275 "The image you have selected is..." [TRANSLATORS: Please refer to the English section of 'rufus.loc' for the FULL message]
	  For more info on the messages below, also see the comments in the English section of rufus.loc
  - *NEW* MSG_276 "Write in %s mode (Recommended)"
  - *NEW* MSG_277 "Write in %s mode"
  - *NEW* MSG_278 "Boot type"
  - *NEW* MSG_279 "Non bootable"
  - *NEW* MSG_280 "Image selection"
  - *NEW* MSG_281 "(Please select an image)"

o Version 1.0.17 (2015.02.04)
  - *NEW CONTROL* IDC_WINDOWS_INSTALL "Standard Windows installation" (Main dialog)
  - *NEW CONTROL* IDC_WINDOWS_TO_GO "Windows To Go" (Main dialog)
  Note: to see the 2 controls above displayed, you will need to load the "Windows To Go.iso" image from
  https://github.com/pbatard/rufus/raw/master/res/localization/Windows%20To%20Go.iso (356 KB)
  Also see the comment for IDC_WINDOWS_TO_GO in the English translation.
  - *NEW* MSG_096 "The file system currently selected can not be used with this type of ISO (...)"
  - *NEW* MSG_097 "'Windows To Go' can only be applied if the file system is NTFS."
  - *NEW* MSG_098 "IMPORTANT: You are trying to install 'Windows To Go', but your target drive doesn't (...)"
  - *NEW* MSG_116 "This image uses Grub %s but the application only includes the installation files for (...)"
    Similar to MSG_114. Please see the comment from the English translation if you want to test this message.
  - *NEW* MSG_190 "Incompatible drive detected"
  - *NEW* MSG_191 "Write pass"
  - *NEW* MSG_192 "Read pass"
    See MSG_235 for where the 2 messages above are being used.
  - *NEW* MSG_193 "Downloaded %s"
  - *NEW* MSG_194 "Could not download %s"
  - *NEW* MSG_195 "Using embedded version of %s file(s)"
  - *NEW* MSG_196 "IMPORTANT: THIS DRIVE USES A NONSTANDARD SECTOR SIZE!! (...)"
  - *NEW* MSG_197 "Nonstandard sector size detected"
  - *NEW* MSG_198 "'Windows To Go' can only be installed on a GPT partitioned drive if it has (...)"
  - *NEW* MSG_199 "Choose this if you plan to install Windows, to another disk, using (...)"
  - *NEW* MSG_200 "Choose this if you want to run Windows directly from the selected device."
  - Changed MSG_205 "Using ISO: %s" -> "Using image: %s"
  - Changed MSG_210 "DONE" -> "READY".
    This message appears in the new Info field that was added to Rufus 2.0 and reflects
    when the application is ready to take an action from the user.
  - Changed MSG_235 "Bad Blocks: PASS %d/%d - %0.2f%% (%d/%d/%d errors)" -> "Bad Blocks: %s %d/%d - %0.2f%% (%d/%d/%d errors)"
    Basically "PASS" will be replaced by "Write pass" or "Read pass" from MSG_191/192 (printed in place of the '%s')
  - Changed MSG_253 "Fixed disks detection" -> "Hard disk detection"
  - *NEW* MSG_264 "Deleting directory '%s'"
  - *NEW* MSG_265 "VMWare disk detection"
  - *NEW* MSG_266 "Dual UEFI/BIOS mode"
  - *NEW* MSG_267 "Applying Windows image: %0.1f%% completed"
  - *NEW* MSG_268 "Applying Windows image..."

o Version 1.0.16 (2015.02.03)
  - Removed MSG_096 - MSG_098
  Note: since this doesn't require translator involvement, I have applied the changes to existing translations.

o Version 1.0.15 (2015.01.23)
  - IDD_ISO_EXTRACT dialog and associated translations have been removed
  Note: since this doesn't require translator involvement, I have applied the changes to existing translations.

o Version 1.0.14 (2014.11.27)
  - Updated translations for the new 2.0 UI font and layout.
  Note: since this doesn't require translator involvement, I have applied the changes to existing translations.

o Version 1.0.13 (2014.11.14)
  - Changed MSG_104 "Syslinux v5.0 or later requires a '%s' file to be installed.\n"
    "Because this file is more than 100 KB in size, and always present on Syslinux v5+ ISO images (...)"
    -> "%s or later requires a '%s' file to be installed.\n"
	  "Because this file is more than 100 KB in size, and always present on %s ISO images (...)"
  Note: since this doesn't require translator involvement, I have applied the change to existing translations.

o Version 1.0.12 (2014.05.19)
  - *NEW* MSG_079 "The device is not ready."
  - *NEW* MSG_189 "This ISO image is not compatible with the selected filesystem"
  - *NEW* MSG_262 "ISO Support" (If you want to know what it's about, see comment in English translation)
  - *NEW* MSG_263 "Use PROPER size units" (If you want to know what it's about, see comment from English translation)
  - Changed MSG_165 "Click to select an ISO..." -> "Click to select an image..."

o Version 1.0.11 (2014.03.29)
  - Changed MSG_011 "%u bad block(s) found" -> "%d bad block(s) found"
  Note: since this doesn't require translator involvement, I have applied the change to existing translations.

o Version 1.0.10 (2014.02.09)
  - *NEW* MSG_095 "DD Image"
  - *NEW* MSG_261 "Writing image: %0.1f%% completed"
  - *NEW* MSG_187 "Invalid image for selected boot option"
  - *NEW* MSG_188 "The current image doesn't match the boot option selected..." (see rufus.loc for full text)
  - Changed MSG_086 "No ISO image selected" -> "No image selected"
  - Changed MSG_087 "Please click on the disc button to select a bootable ISO..." -> "Please click on the disc button to select a bootable image..." (see rufus.loc for full text)
  - Changed MSG_088 "ISO too big" -> "Image is too big"
  - Changed MSG_089 "This ISO image is too big for the selected target." -> "The image is too big for the selected target."
  - Changed MSG_202 "Scanning ISO image..." -> "Scanning image..."
  - Changed MSG_203 "Failed to scan ISO image" -> "Failed to scan image"

o Version 1.0.9 (2014.01.31)
  - *NEW* MSG_260 "NTFS compression"
    Note: Since this is a cheat-mode message, I don't specially care if it gets translated for the next version

o Version 1.0.8 (2014.01.21)
  - Changed MSG_047 "%s (%c:)" -> "Multiple Volumes" (non-updated ones have been commented out)
  - *NEW* MSG_093 "IMPORTANT: THIS DRIVE CONTAINS MULTIPLE PARTITIONS OR VOLUMES!!"
  - *NEW* MSG_094 "Multiple partitions detected"
  - *NEW* MSG_114 "This image uses Syslinux %s but this application only includes the installation files for Syslinux %s."
  - *NEW* MSG_115 "Download required"
  - Changed MSG_234: 'v%d' is replaced with '%s' (change already applied to existing translations)

o Version 1.0.7 (2014.01.01)
  - Added MSG_092 again
  - Added English example for OK button in About box (IDOK)

o Version 1.0.6 (2013.12.17)
  - Removed IDD_MESSAGES (and the need for 'g IDD_MESSAGES')

o Version 1.0.5 (2013.12.11)
  - Removed MSG_092 to MSG_094

o Version 1.0.4 (2013.12.02)
  - MSG_033 -> MSG_031
  - MSG_031 -> MSG_032
  - MSG_032 -> MSG_033

o Version 1.0.3 (2013.11.15)
  - IDC_ENABLE_FIXED_DISKS "List non removable or unpartitioned USB disks" -> "List USB Hard Drives"
  - MSG_170 "Enable detection for disks not normally detected by Rufus" -> "Enable the listing of USB Hard Drive enclosures"

o Version 1.0.2 (2013.10.30)
  - *NEW* MSG_110 "MS-DOS cannot boot from a drive using a 64 kilobyte Cluster size..."
  - *NEW* MSG_111 "Incompatible Cluster size"
  - *NEW* MSG_112 "Formatting a large UDF volumes can take a lot of time..."
  - *NEW* MSG_113 "Large UDF volume"
  - *NEW* MSG_220 "Formatting (%s) - estimated duration %d:%02d..."
  - *NEW* MSG_207 "New Volume"

o Version 1.0.1 (2013.10.28)
  - MSG_061 "Please insert a media in drive." -> "Please insert a removable media in drive."
  - MSG_071 "Unable to create formatting thread." -> "Unable to start thread."

o Version 1.0.0 (2013.10.20)
  - Initial version