* Combined with the increase in buffer size from previous commits, this
should help us get close to a device's maximum write speed.
* Also add async write support to winio.h
* Also increase the buffer size for bad blocks check operations
* This is in preparation for async reads
* Also move open/close image operations to WriteDrive()
* Also increase DD buffer size to 32 MB to improve performance
* InternetGetConnectedState() is next to useless and doesn't provide
coherent outcome on the ARM64 platform I'm testing with. This results
in Rufus declaring that Internet is unavailable on platforms that do
have actual Internet connectivity.
* Swicth to using INetworkListManager::GetConnectivity(), which actually
reports a dependable result.
* Closes#1691
* Also remove the mutex for uprintf(), which may produce thread lockout
and remove an unwanted double GetSignatureName() call on startup.
* Due to the partition gymnastic that is required by the hack that is ISOHybrid,
some ISOHybrid images that are written in DD mode, such as Ubuntu 20.10, may
result in Windows somehow "losing" the target disk from some of its listings.
* This "removal" can be seen for instance if you have diskpart already open and
issue 'list disk' after Rufus 3.13 completed its image writing.
* In the worst case scenario, Windows may flat out refuse to access the disk at
the sector level be it in diskpart or disk manager, which forces ones to clear
the partition tables on Linux or some other OS to be able to "recover" the disk.
* This appears to be mostly due to Windows VDS cache (which Microsoft assures
should be able to do a proper job of refreshing itself on its own, in the same
stride as they also feel the need to introduce IVdsService::Refresh whose sole
purpose appears to work around a limitation that Microsoft knows exists) not
being in sync with the actual disk layout.
* So we now add calls to VDS layout refresh where needed, to work around the issue.
* Also fix an ext2fs Coverity warning.
* When writing images such as tails, that contain a large ESP, Windows forcibly
removes the media while we are writing it, unless we lock the logical drive.
* Also fix a Bled Coverity warning.
* Remove early locking of logical volume (no longer necessary due to previous commits).
* Relax exclusive locking of physical drive when an ESP is created.
* This should help with #1637 and #1640
* Also add an extra check for sector size in WriteDrive()
* Factorize drive letter removal into a RemoveDriveLetters() call.
* Improve MountVolume() and RemountVolume() calls.
* Also bump Rufus version to 3.13
* Make sure that instantiated objects are released.
* Factorize the instantiating of disk interfaces.
* Allow the provision of an offset to delete a single partition.
* Add a ListVdsVolumes() call (which is pointless since Microsoft *CRIPPLED* its VDS implementation).
* SetAutoMount()/GetAutoMount() should check for INVALID_HANDLE_VALUE and not NULL.
Also we don't actually need to open MOUNTMGR_DOS_DEVICE_NAME rw to issue an IOCTL.
* ToggleEsp() failed to exit properly when an ESP offset was specified.
* Introduce PI_MAX to explicitly set the size of the partition_information table.
* write_sectors() has write retry, so there's no need to perform one on top of it.
* When we exit FormatThread(), GetLogicalName() should attempt to look for the the
main partition and be silent.
* A user is reporting that, on one of their platforms, Rufus is writing to the wrong target during the file-copy
phase and using their existing Y: local drive instead of the drive associated to the USB, despite the fact
that Rufus is passing the right volume name to GetVolumePathNamesForVolumeName().
* Here's the PowerShell wmic output, confirming that the volume GUID obtained by Rufus is the right one:
DriveLetter : Y:
DeviceId : \\?\Volume{000349b1-17d0-69f6-c13f-f31162930600}\
Capacity : 118540464128
FileSystem : NTFS
Label : Y-DISK
DriveLetter : H:
DeviceId : \\?\Volume{b150ff4a-d62b-11ea-86e3-f49634660e54}\
Capacity : 15791824896
FileSystem : FAT32
Label : ADATA16GB
* And here's the Rufus log demonstrating that GetVolumePathNamesForVolumeName() is returning the *WRONG* letter:
Found volume \\?\Volume{b150ff4a-d62b-11ea-86e3-f49634660e54}\
\\?\Volume{b150ff4a-d62b-11ea-86e3-f49634660e54}\ is already mounted as Y: instead of H: - Will now use this target instead...
* The last line shows, without the shadow of a doubt, that we did feed "\\?\Volume{b150ff4a-d62b-11ea-86e3-f49634660e54}\" to
GetVolumePathNamesForVolumeName() and that this API call was successful (returned a non zero size) but ultimately returned
the wrong letter (Y: instead of H:)...
* Therefore, Windows is BUGGY and the use of GetVolumePathNamesForVolumeName() must be avoided.
* This is mostly aimed at Debian 11 netinst on the Raspberry Pi 4
* Only available for regular UEFI ISOs if GPT and FAT are selected (no MBR ESPs).
* Also fix a MinGW warning in GetUnusedDriveLetter()
* ASLR is enabled by default for Visual Studio builds but that isn't the case
for MinGW builds. Fix that and also add -Wformat-security while we're at it.
* Closes#1518
* Also ensure that we'll never write protective MBR message for non-bootable
GPT drives, even as we are not calling WriteSBR() for those anyway.
* Also fix SBR message not being written for bootable images
* Also add an extra partition refresh after deleting partitions to try
to further force Windows take its stinking paws off our drive.
* We distractedly chose to populate the message from our protective MBR
for GPT/UEFI-only boot media into the 4KB that directly followed the
MBR, which of course is space that is being used by the primary GPT.
* This resulted on systems having to fall back to using the secondary
GPT, which not all appear to be designed to do.
* Alter the code to ensure the protective message is written at LBA 34,
after the primary GPT.
* Closes#1507
* If a converted label contains mostly underscore, the proposed
label is used for FAT32 instead. However this label still has
the KB/MB/GB symbols localized so it may be invalid.
* Ensure that we use a non-localized version of the size when
using such a label.
* Closes#1506.
* Also fix a VS2019 static analysis warning in net.c.
* Surround macro params to ensure expected results
* Fix copy-paste errors
* Fix a potential buffer overflow in SetSectionHeaders()
* Add const modifier where relevant
* Use GetWindowLongPtr() everywhere
* Use proper sprintf format for unsigned int
* Use %s for printf-like funcs (https://www.viva64.com/en/w/v618/print/)
* Closes#1464
* Hopefully using DICS_FLAG_CONFIGSPECIFIC instead of DICS_FLAG_GLOBAL is all that was needed
to get device disabling/re-enabling work without creating zombie devices, because we sure
need to force Windows' hand when it comes to detecting logical volumes...
* ClearMBRGPT() attempts to write WRITE_RETRIES times, even if all those times succeed.
* Instead, skip the remaining retries on success.
* Also improve code readability.
* Closes#1454
* Fix use of EXT2_BLOCK_SIZE() instead of EXT2_INODE_SIZE() during inode
initialization, that made us zero way many more blocks than was needed.
* Also disable sparse_super feature and improve block setup.
* Also explicitly use IS_POWER_OF_2 macro where required.
* Only applies for blank UEFI:NTFS drives for now. UEFI:NTFS Windows drives are
still set to use NTFS only (since Windows 7 doesn't support UEFI exFAT boot).
* Windows platforms prior to Windows 10 1703 cannot access any logical partition besides the
first one (we don't even get a volume for those).
* This fix enables the use of physical + offset for ext# formatting to work around this,
which is file since we don't actually need to mount the partition.
* Also fix ext2fs_open2() not handling normalized versions of Windows drive paths ("\\?\...")
* Also fix an issue where we would make the drive letter unavailable after formatting a
standalone partition to ext#.
* Also ensure that we return an error if the drive we attempt to locate a partition on
through an offset does not match the currently selected one.
* Also remove some unused calls in drive.c.
* Closes#1374
Pete Batard
Tsarevich Dmitry
Derek Foreman