* Shift main dialog left in case of overlap
* Fix loss of application focus when displaying the log
* Display Windows version in the log
* Also switch to LZMA for UPX compression
* Closes#148
* Use retries when locking the volume
* Wait for volume availability after partitioning
* Don't halt on errors that can be ignored
* Other small improvements and fixes
* The above should help with addressing #122
* Use IOCTL_DISK_UPDATE_PROPERTIES after partitioning
* Use IOCTL_DISK_DELETE_DRIVE_LAYOUT to invalidate partitions before formatting
* Fix handling of unpartitioned drives
* Increase delay after partitioning
* All of the above should help with the infamous #122
* Also fix display of error messages in ms-sys' file.c as well as stdio.c
* Also add commandline option -f to list fixed drives
* The creation of UFDs with >4GB files should be allowed for NTFS
* Closes#146
* Also switch MessageBoxA() to UTF8 and update some of the message titles
* Use .bss and .sys from Syslinux v5.10
* Advanced options allow you to choose between v4 and v5
* Rufus does not currently copy any ldlinux.c32 to the target
* This is not full Syslinux v5.0 support, but only to prevent the (vesa)menu.c32 message from displaying
* Uses the mandatory inclusion of ldlinux.c32 in Isolinux v5.x for the detection
* Part of a fix for #142
* Raise the size of vesamenu.c32 threshold, a per #140
* Fix a missing backslash when checking for autorun.inf
* Only set boot flag is requested by the user
* Better split of physical vs logical
* Add handling of unmounted volumes by GUID
* Force large FAT32 cheat mode
* Improve user messages and fix some UI issues
* eg. GPT drives with no partitions were not enumerated by default
* fixed disk mode needs to be enabled for this detection to occur
* also fix the unwanted use of a drive letter in GetDrivePartitionData
* also add a check for going over MAX_DRIVES
* also fix improper separator line in FreeDOS menu due to UTF-8 source
* closes#124
* add commandline usage guide
* use -w 150 instead of /W for updated app launch
* fix enabling/disabling of advanced options for UEFI/exFAT
* test for >4GB files for UEFI
* fix warning with freopen
* part of issue #111
* add getopt dependency for MS compilers
* enable the provision of an ISO as parameter
* also fixes shadowed sevenzip_path in vhd.c
* update copyright year
* switch relevant files to UTF-8 (without signature).
It's 2013 for crying out loud: if your file editor or file viewer
can't handle plain UTF-8, go back to the 1980s!
* also rename autogen.sh to bootstrap.sh
* On some systems, the UFD may boot as A:, not C:, in which case
FreeDOS and WinME DOS will fail to be setup properly
* Fix suggested by Klaus Hohenauer
* without the marker, an UFD created as MBR for UEFI will be seen
as MBR for BIOS + UEFI. We want Rufus to be able to select the
settings that were used for the drive creation.
* Also hides #116 under the carpet and fix non RUFUS_DEBUG compilation
* Contains the bulk of the code required to address #11
* Tested with Windows 8 Pro x64 (en-gb_windows_8_x64_dvd_915412.iso)
and Arch Linux (archlinux-2013.01.04-dual.iso) against an UEFI 2.1 BIOS
* Also fixes missing status report beta versions check
* If not, a VS2012 compiled Rufus will crash, as it doesn't allow
working directly on embedded resources
* Closes#118
* Also update ChangeLog for previous patch
* This was issue #90 and commit 261834e31f
* Unfortunately, the ArchLinux workaround breaks Windows XP installation
so ArchLinux ISOs will have to fix their ISO9660 compliance themselves...
* Add dialog for new release notification
* Do not check for updates during format or ISO ops
* Add RTF support for parser and security improvements
* Also improve init and exit of progress dialog
* Fixes only MS-DOS option being proposed when no drive is present
* Fixes only MS-DOS available when an empty card reader is detected first
* Fixes loss of user input label when switching between boot options
NB: ISO label is forced over user input as distros such as Arch Linux
want to see a specific label for the USB
* Closes#95
* Closes#96
* Due to Arch Linux (archlinux-2012.08.04-dual.iso) - See #90
* It is still possible that this patch will have unwanted effect
for ISO-9660 compliant images...
* Use \i386 always through SetupSourceDevice in txtsetup.sif
and prevent deletion of install directory
* Removed setupdd.sy_ patch. Now, none of the files in \i386 are modified
* Better /minint detection for MBR setup
* Also fixed an issue where mbr.bin resources would not be included
* Adds USB masquerading according to disk ID in USB part table
* Adds debug feature
* Closes#74 - was due to flags not being properly saved/restored
* Closes#71
* Fixes reentrant INT_13h for some platforms (eg. IBM t43p reenters
INT_13h to issue an SCSI passthrough, AH=0x50)
* Embed MBR as a resource rather than an ms-sys header
* Adds an MBR to prompt the use about USB or HDD boot
* If USB boot is not selected, an INT13h override is added to
make the second bootable drive think it is first (0x81 -> 0x80)
* USB drive BIOS index is left unmodified
* 32 bit bad blocks check is too limited for large drives
and result in erroneous computations
* 32 bit also means that 2TB would be absolute limit, which
may be too low in case for USB HDD checks
* This fix makes bad blocks check and related calls 64 bit compliant
* also improve on bad block reports
* add readout and display of extended autorun.inf label if available
* use improved isolinux config parsing
* also fix an issue that could leave drive unmounted on forced removal
* also add Alt-F cheatmode to toggle detection of fixed USB disks
* When using Win7 installation ISOs, XP would return the error:
[0x00000456] The media in the drive may have changed
* This seems to be due to unmounting of the drive before writing
the PBR
* Also, our ms-sys/NTFS code wasn't identifying NTFS properly on XP
* Our detection code, which is based on the HPUSBFW utility, allows fixed
drives such as USB HDDs to be listed
* Since Rufus lacks extra precautions for fixed disks, this may result in
people mistakenly formatting and HDD instead of a flash drive
* Until we have added HDD specific features (support for repartitioning or
existing partitions, >32GB FAT32, etc.) we prefer playing it safe by
not listing fixed disks.
* We will re-enable fixed disks when we feel enough safeties are in place
* Also fix an issue where ISO selection could crash if Rufus
was compiled for Vista and later and update version to rufus-next
* Creates an UTF-16 autoconf.inf with label, as well as autoconf.ico
* also fixed extended labels not displaying - closes#48
* also bumped version to rufus-next
* also factorized iso props analysis
* additional fixes
* Allow the use of vanilla Syslinux by creating a /syslinux.cfg
that references isolinux.cfg
* Fix#40 and #42
* Workaround for #44 by search and replace of ISO label in .cfg
* ISO9660 Joliet fixes
* Fix for broken UDF access with MSVC on some images
(eg. Arch Linux)
* Fix for broken Joliet access on ISO9660 images and
proper Joliet support in iso.c
* scan would fail on lowercase vs mixed case dir name comparison
due to Joliet (eg. using Slackware 13.37 ISO)
* extraction would fail for 4 GB ISO9660 ISOs
* also fixes cases issue when checking for isolinux/bootmgr
* also don't restrict NTFS labels
* DOS creation was broken due to missing unlock + close
* added label validation to prevent errors
* added ellipsis to status bar
* also bumped version to rufus next and fixed f/non-f
* required for Linux distros such as Arch Linux
* also added udf_get_logical_volume_id to libcdio and other fixes
* also prevents overwrite of ldlinux.sys from ISO
* closes#36
* bootmgr ISOs only
* extraction and ISO support UI improvements
* UTF8 support through CreateFileU
* cancellation on ISO file extraction
* switch to using CreateThread
* STORAGE_DEVICE_NUMBER.DeviceNumber is not unique! Optical drives and
HDDs can have the same number
* Use GetDriveType() to filter unwanted devices
* closes#32
* default is enabled (=> add --without-freedos to disable)
* also update the release process as a result
* also update version to rufus next
* also fixed FreeDOS embedded files lost when RC is edited in Visual Studio
* sets DOS locale using the same algorithm as MS' diskcopy.dll
* uses CONFIG.SYS menu to allow US vs non US selection
* only applies to WinME/MS-DOS for now (no FreeDOS)
* also renamed msdos.c -> dos.c with minor improvements
* also added missing FreeDOS credits in about dialog
* closes#22 (missing CloseHandle for FreeDOS' AUTOEXEC.BAT)
* split rufus and rufus_fd solution files (VS2010)
* error messages small improvements
* since we're on Windows, use .txt extension for README and TODO
* create an empty AUTOEXEC.BAT file to avoid date/time prompt
* use a patched version of KERNEL.SYS from 2011.12.16 FreeDOS SVN to avoid CHS warnings
see freedos/readme.txt for details
* also removed read-only attribute on COMMAND.COM and KERNEL.SYS to allow SYS CONFIG
* also
* closes#19
* closes#20
* Disk Drive ID fixup for FAT32 was already available in ms-sys with option -p
* modified code to add FAT16 as well as FAT32 support as well as minor fixes
* reverts previous patch write_fat_32_br() and write_fat_16_br()
* fixed issue #16 - crash during format on XP
* fixed issue #17 - non bootable drives when created in XP
* for more info on the problem and fix, see the issues above
* follow what MS/FormatEx actually allow
* closes#15
* also fixed potential empty selection in cluster size dropdown
* also improved Local Group Policy handling
* new drive notifications from explorer are annoying
* use Local Group Policy to temporarily disable them
* also fixed missing SetupDiDestroyDeviceInfoList call
* progress bar now reflects actual completion of process more closely
* dropped the use of UM_FORMAT_PROGRESS and introduced UpdateProgress() instead
* also reduced the number of rw test patterns from 4 to 2
* after a bb check, MBR could become garbage
* when that occurs, Windows might interpret a bad partition table and prevent MBR from being properly written
* force a complete zeroing of the whole MBR before partitioning to fix this
* also added error code for bb
