rufus/res/localization/ChangeLog.txt

This file lists any change that has been applied to the en-US translation of
rufus.loc since its original version. Translators are expected to keep their
translations up to date by monitoring this file on regular basis and applying
the same changes.

When editing an existing translation, make sure you always follow:
https://github.com/pbatard/rufus/wiki/Localization#Editing_a_translation

Remember to also update the version number for your translation ('v x.y.z')
once you have matched all the changes that occurred for the en-US translation.

!!IMPORTANT!! The changes below do NOT contain the full message and only tell
you WHERE, in the English translation, you should look to find the full message
content. PLEASE, do not just look at this Changelog when updating your
translation, but always use the English section of rufus.loc as your base.
For instance, MSG_114, that was introduced in v1.0.8 is MORE than one line!

o Version 1.0.12 (2014.05.19)
  - *NEW* MSG_079 "The device is not ready."
  - *NEW* MSG_189 "This ISO image is not compatible with the selected filesystem"
  - *NEW* MSG_262 "ISO Support" (If you want to know what it's about, see comment in English translation)
  - *NEW* MSG_263 "Use PROPER size units" (If you want to know what it's about, see comment from English translation) 
  - Changed MSG_165 "Click to select an ISO..." -> "Click to select an image..."

o Version 1.0.11 (2014.03.29)
  - Changed MSG_011 "%u bad block(s) found" -> "%d bad block(s) found"
  Note: since this doesn't require translator involvement, I have applied the change to existing translations.

o Version 1.0.10 (2014.02.09)
  - *NEW* MSG_095 "DD Image"
  - *NEW* MSG_261 "Writing image: %0.1f%% completed"
  - *NEW* MSG_187 "Invalid image for selected boot option"
  - *NEW* MSG_188 "The current image doesn't match the boot option selected..." (see rufus.loc for full text)
  - Changed MSG_086 "No ISO image selected" -> "No image selected"
  - Changed MSG_087 "Please click on the disc button to select a bootable ISO..." -> "Please click on the disc button to select a bootable image..." (see rufus.loc for full text)
  - Changed MSG_088 "ISO too big" -> "Image is too big"
  - Changed MSG_089 "This ISO image is too big for the selected target." -> "The image is too big for the selected target."
  - Changed MSG_202 "Scanning ISO image..." -> "Scanning image..."
  - Changed MSG_203 "Failed to scan ISO image" -> "Failed to scan image"

o Version 1.0.9 (2014.01.31)
  - *NEW* MSG_260 "NTFS compression"
    Note: Since this is a cheat-mode message, I don't specially care if it gets translated for the next version

o Version 1.0.8 (2014.01.21)
  - Changed MSG_047 "%s (%c:)" -> "Multiple Volumes" (non-updated ones have been commented out)
  - *NEW* MSG_093 "IMPORTANT: THIS DRIVE CONTAINS MULTIPLE PARTITIONS OR VOLUMES!!"
  - *NEW* MSG_094 "Multiple partitions detected"
  - *NEW* MSG_114 "This image uses Syslinux %s but this application only includes the installation files for Syslinux %s."
  - *NEW* MSG_115 "Download required"
  - Changed MSG_234: 'v%d' is replaced with '%s' (change already applied to existing translations)

o Version 1.0.7 (2014.01.01)
  - Added MSG_092 again
  - Added English example for OK button in About box (IDOK)

o Version 1.0.6 (2013.12.17)
  - Removed IDD_MESSAGES (and the need for 'g IDD_MESSAGES')

o Version 1.0.5 (2013.12.11)
  - Removed MSG_092 to MSG_094

o Version 1.0.4 (2013.12.02)
  - MSG_033 -> MSG_031
  - MSG_031 -> MSG_032
  - MSG_032 -> MSG_033

o Version 1.0.3 (2013.11.15)
  - IDC_ENABLE_FIXED_DISKS "List non removable or unpartitioned USB disks" -> "List USB Hard Drives"
  - MSG_170 "Enable detection for disks not normally detected by Rufus" -> "Enable the listing of USB Hard Drive enclosures"

o Version 1.0.2 (2013.10.30)
  - *NEW* MSG_110 "MS-DOS cannot boot from a drive using a 64 kilobyte Cluster size..."
  - *NEW* MSG_111 "Incompatible Cluster size"
  - *NEW* MSG_112 "Formatting a large UDF volumes can take a lot of time..."
  - *NEW* MSG_113 "Large UDF volume"
  - *NEW* MSG_220 "Formatting (%s) - estimated duration %d:%02d..."
  - *NEW* MSG_207 "New Volume"

o Version 1.0.1 (2013.10.28)
  - MSG_061 "Please insert a media in drive." -> "Please insert a removable media in drive."
  - MSG_071 "Unable to create formatting thread." -> "Unable to start thread."

o Version 1.0.0 (2013.10.20)
  - Initial version
[loc] add [v]ersion command support 2013-10-30 20:28:56 +00:00			`This file lists any change that has been applied to the en-US translation of`
			`rufus.loc since its original version. Translators are expected to keep their`
			`translations up to date by monitoring this file on regular basis and applying`
			`the same changes.`

[misc] fix issues with unpartitioned drives and bad blocks reports * Listing an unpartitioned could result in all controls besides drive selection dropdown being blank * The bad blocks report was not displaying the right values * Also update version to Rufus next 2014-03-29 00:42:49 +00:00			`When editing an existing translation, make sure you always follow:`
			`https://github.com/pbatard/rufus/wiki/Localization#Editing_a_translation`

[loc] add [v]ersion command support 2013-10-30 20:28:56 +00:00			`Remember to also update the version number for your translation ('v x.y.z')`
			`once you have matched all the changes that occurred for the en-US translation.`

[misc] add NTFS compression support * Only as a cheat mode (Alt-N) * Also fixes inconsistent MBR partition numbering * Also update a comment in vhd.c about callback progress (thanks to Erwan) 2014-01-31 02:51:28 +00:00			`!!IMPORTANT!! The changes below do NOT contain the full message and only tell`
			`you WHERE, in the English translation, you should look to find the full message`
			`content. PLEASE, do not just look at this Changelog when updating your`
			`translation, but always use the English section of rufus.loc as your base.`
			`For instance, MSG_114, that was introduced in v1.0.8 is MORE than one line!`

[loc] update translation base to v1.0.12 * Also change UM_ISO_ constants to the more generic UM_PROGRESS_ 2014-05-19 22:25:00 +00:00			`o Version 1.0.12 (2014.05.19)`
			`- NEW MSG_079 "The device is not ready."`
			`- NEW MSG_189 "This ISO image is not compatible with the selected filesystem"`
			`- NEW MSG_262 "ISO Support" (If you want to know what it's about, see comment in English translation)`
			`- NEW MSG_263 "Use PROPER size units" (If you want to know what it's about, see comment from English translation)`
			`- Changed MSG_165 "Click to select an ISO..." -> "Click to select an image..."`

[misc] fix issues with unpartitioned drives and bad blocks reports * Listing an unpartitioned could result in all controls besides drive selection dropdown being blank * The bad blocks report was not displaying the right values * Also update version to Rufus next 2014-03-29 00:42:49 +00:00			`o Version 1.0.11 (2014.03.29)`
			`- Changed MSG_011 "%u bad block(s) found" -> "%d bad block(s) found"`
			`Note: since this doesn't require translator involvement, I have applied the change to existing translations.`

[core] add uncompressed DD image support * Also fix an issue with hotplug due to WM_DEVICECHANGE being filtered out * Also improve AnalyzeMBR() and prevent failure on WriteMBR * Also fix a couple issues with ISO and Syslinux handling * Also remove "smart" uncheck of disabled checkboxes - not worth it 2014-02-09 02:54:07 +00:00			`o Version 1.0.10 (2014.02.09)`
			`- NEW MSG_095 "DD Image"`
			`- NEW MSG_261 "Writing image: %0.1f%% completed"`
			`- NEW MSG_187 "Invalid image for selected boot option"`
			`- NEW MSG_188 "The current image doesn't match the boot option selected..." (see rufus.loc for full text)`
[img] add a retry for DD Images * Also try to ignore autorun.inf issues from idiotic antivirus solutions, when writing ISOs * Also remove the columns in the English labels (improves high DPI display) * Also update additional ISO related messages to make them more generic 2014-02-09 23:38:16 +00:00			`- Changed MSG_086 "No ISO image selected" -> "No image selected"`
			`- Changed MSG_087 "Please click on the disc button to select a bootable ISO..." -> "Please click on the disc button to select a bootable image..." (see rufus.loc for full text)`
[core] add uncompressed DD image support * Also fix an issue with hotplug due to WM_DEVICECHANGE being filtered out * Also improve AnalyzeMBR() and prevent failure on WriteMBR * Also fix a couple issues with ISO and Syslinux handling * Also remove "smart" uncheck of disabled checkboxes - not worth it 2014-02-09 02:54:07 +00:00			`- Changed MSG_088 "ISO too big" -> "Image is too big"`
			`- Changed MSG_089 "This ISO image is too big for the selected target." -> "The image is too big for the selected target."`
[img] add a retry for DD Images * Also try to ignore autorun.inf issues from idiotic antivirus solutions, when writing ISOs * Also remove the columns in the English labels (improves high DPI display) * Also update additional ISO related messages to make them more generic 2014-02-09 23:38:16 +00:00			`- Changed MSG_202 "Scanning ISO image..." -> "Scanning image..."`
			`- Changed MSG_203 "Failed to scan ISO image" -> "Failed to scan image"`
[misc] add NTFS compression support * Only as a cheat mode (Alt-N) * Also fixes inconsistent MBR partition numbering * Also update a comment in vhd.c about callback progress (thanks to Erwan) 2014-01-31 02:51:28 +00:00
			`o Version 1.0.9 (2014.01.31)`
			`- NEW MSG_260 "NTFS compression"`
			`Note: Since this is a cheat-mode message, I don't specially care if it gets translated for the next version`

[syslinux] fix support for recent Syslinux versions * Detect Syslinux version from isolinux.bin (Closes #272) * Download required Syslinux v5+ files where needed (Closes #165) * Also fix an issue where using a Syslinux based ISO didn't switch to ISO mode * Also alter DownloadFile and ExtractISOFile to return a size 2014-01-21 17:08:41 +00:00			`o Version 1.0.8 (2014.01.21)`
[core] detect, report and warn when multiple partitions are in use * Closes #191 * Also fix various minor warnings 2014-01-14 20:17:07 +00:00			`- Changed MSG_047 "%s (%c:)" -> "Multiple Volumes" (non-updated ones have been commented out)`
			`- NEW MSG_093 "IMPORTANT: THIS DRIVE CONTAINS MULTIPLE PARTITIONS OR VOLUMES!!"`
			`- NEW MSG_094 "Multiple partitions detected"`
[misc] right-to-left and version handling improvements * Improve right-to-left consistency and handling * Drop 'v' from version indicators * Also update version to 1.4.4 * Also fix French translation typos 2014-01-24 19:59:23 +00:00			`- NEW MSG_114 "This image uses Syslinux %s but this application only includes the installation files for Syslinux %s."`
[syslinux] fix support for recent Syslinux versions * Detect Syslinux version from isolinux.bin (Closes #272) * Download required Syslinux v5+ files where needed (Closes #165) * Also fix an issue where using a Syslinux based ISO didn't switch to ISO mode * Also alter DownloadFile and ExtractISOFile to return a size 2014-01-21 17:08:41 +00:00			`- NEW MSG_115 "Download required"`
[core] detect, report and warn when multiple partitions are in use * Closes #191 * Also fix various minor warnings 2014-01-14 20:17:07 +00:00			`- Changed MSG_234: 'v%d' is replaced with '%s' (change already applied to existing translations)`
[syslinux] fix support for recent Syslinux versions * Detect Syslinux version from isolinux.bin (Closes #272) * Download required Syslinux v5+ files where needed (Closes #165) * Also fix an issue where using a Syslinux based ISO didn't switch to ISO mode * Also alter DownloadFile and ExtractISOFile to return a size 2014-01-21 17:08:41 +00:00
[loc] fix various localization issues * MSG_092 is still being used * Typo in MSG_245 * Add example in English translation for changing the About->OK button text * Issues reported by Wayne Ying * Also update copyright year 2014-01-02 00:20:48 +00:00			`o Version 1.0.7 (2014.01.01)`
			`- Added MSG_092 again`
			`- Added English example for OK button in About box (IDOK)`

[loc] use a direct table for the messages * More efficient and also the first step for addressing #188 2013-12-18 01:20:44 +00:00			`o Version 1.0.6 (2013.12.17)`
			`- Removed IDD_MESSAGES (and the need for 'g IDD_MESSAGES')`

[efi] add NTFS support * As reported at http://www.eightforums.com/tutorials/15458-uefi-bootable-usb-flash-drive-create-windows-27.html#post309665 and http://forums.mydigitallife.info/threads/46981-Install-Win8-Windows-8-1-UEFI-With-a-Over-sized%28over-4GB%29-install-wim it is actually possible to boot and install an EFI system from an NTFS drive * Closes #228 2013-12-11 19:00:57 +00:00			`o Version 1.0.5 (2013.12.11)`
			`- Removed MSG_092 to MSG_094`

[loc] reflect the last fix with a version bump 2013-12-02 20:54:54 +00:00			`o Version 1.0.4 (2013.12.02)`
			`- MSG_033 -> MSG_031`
			`- MSG_031 -> MSG_032`
			`- MSG_032 -> MSG_033`

[core] finalize UFD vs HDD detection * Closes #219 2013-11-15 21:39:40 +00:00			`o Version 1.0.3 (2013.11.15)`
			`- IDC_ENABLE_FIXED_DISKS "List non removable or unpartitioned USB disks" -> "List USB Hard Drives"`
			`- MSG_170 "Enable detection for disks not normally detected by Rufus" -> "Enable the listing of USB Hard Drive enclosures"`
[loc] update Italian translation to v1.0.3 * Also improve ChangeLog.txt readability 2013-11-17 22:37:08 +00:00
[misc] warn about UDF formatting times and 64k MS-DOS * Closes #149 * Closes #180 2013-10-31 22:59:53 +00:00			`o Version 1.0.2 (2013.10.30)`
			`- NEW MSG_110 "MS-DOS cannot boot from a drive using a 64 kilobyte Cluster size..."`
			`- NEW MSG_111 "Incompatible Cluster size"`
			`- NEW MSG_112 "Formatting a large UDF volumes can take a lot of time..."`
			`- NEW MSG_113 "Large UDF volume"`
			`- NEW MSG_220 "Formatting (%s) - estimated duration %d:%02d..."`
[format] existing volumes with the name "New Volume" should be renamed * Closes #104 2013-10-31 23:16:44 +00:00			`- NEW MSG_207 "New Volume"`
[loc] update Italian translation to v1.0.3 * Also improve ChangeLog.txt readability 2013-11-17 22:37:08 +00:00
[loc] add [v]ersion command support 2013-10-30 20:28:56 +00:00			`o Version 1.0.1 (2013.10.28)`
			`- MSG_061 "Please insert a media in drive." -> "Please insert a removable media in drive."`
			`- MSG_071 "Unable to create formatting thread." -> "Unable to start thread."`
[loc] update Italian translation to v1.0.3 * Also improve ChangeLog.txt readability 2013-11-17 22:37:08 +00:00
[loc] add [v]ersion command support 2013-10-30 20:28:56 +00:00			`o Version 1.0.0 (2013.10.20)`
[misc] set default size for ReFS and fix multiple other issues * ReFS only applies for drives that are larger than 512MB * Also fix error handling and messages in format.c * Also add Alt-Q cheat mode for proper size units, and improve human readable size output 2014-04-02 21:47:35 +00:00			`- Initial version`