kernelpanic/iglunix
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Compare commits

base: kernelpanic:main
Branches Tags
kernelpanic:main
kernelpanic:0.0.5-alpha
kernelpanic:0.0.4-alpha
kernelpanic:0.0.3-alpha
kernelpanic:0.0.2-alpha
kernelpanic:0.0.1-alpha
kernelpanic:0.0.0-alpha
..
compare: kernelpanic:0.0.0-alpha
Branches Tags
kernelpanic:main
kernelpanic:0.0.5-alpha
kernelpanic:0.0.4-alpha
kernelpanic:0.0.3-alpha
kernelpanic:0.0.2-alpha
kernelpanic:0.0.1-alpha
kernelpanic:0.0.0-alpha

No commits in common. "main" and "0.0.0-alpha" have entirely different histories.
main ... 0.0.0-alph

375 changed files with 5597 additions and 15027 deletions
Download patch file Download diff file Expand all files Collapse all files

8
.editorconfig
View file

@ -1,8 +0,0 @@
root = true
[*]
insert_final_newline = true
trim_trailing_whitespace = true
[*.{c,h,sh}]
indent_style = tab
tab_width = 4

5
.gitignore vendored
View file

@ -2,8 +2,3 @@ src/
out/ out/
pkgs/*/src pkgs/*/src
pkgs/*/out pkgs/*/out
isoroot
isoout
fdiskscript
diskroot
*.img

70
INSTALL.md
View file

@ -1,70 +0,0 @@
# Iglunix Installation Guide
## Getting an installation image
There are two ways of getting hold of an install image: From the releases tab on
GitHub and with [iglunix-autobuild](https://github.com/iglunix/iglunix-autobuild).
### Using Autobuild
```
git clone https://github.com/iglunix/iglunix-autobuild
cd iglunix-autobuild
./autobuild.sh
./chroot.sh
./img.sh
```
### Writing the image
Write the image to a USB to boot on the target computer.
Make sure to triple check which disk you're writing to.
```
dd if=build/iglunix.img of=/dev/sdX bs=64M
```
## Disk Partitioning
Iglunix recommends a two partition layout with an MBR partition table, a FAT
formatted boot partition and an EXT4 formated root partition. The following
is a guide on how to do it where `/dev/disk` is the target install disk.
```
fdisk /dev/disk
>o
>n
>p
>1
>2048
>+512M
>t
>ef
>n
>p
>2
>
>
>w
mkfs.vfat -n BOOT /dev/disk1
mkfs.ext4 -L ROOT /dev/disk2
mkdir /install_root
mount /dev/disk2 /install_root
mkdir /install_root/boot
mount /dev/disk1 /install_root/boot
```
## Extracting Packages
For any packages you want to install
```
tar -I zstd -xf /mnt/<pkgname>.<pkgver>.tar.zst -C /install_root
```
## The init system
Use https://github.com/iglunix/iglunix/tree/main/init not https://github.com/iglunix/init
## Installing Bootloaders
```
limine-deploy /dev/disk
cp /usr/share/limine/limine.sys /install_root/boot
# If the oslo package wasn't installed earlier and you want UEFI support
cp /usr/share/limine/BOOTX64.EFI /install_root/boot/efi/boot/bootx64.efi
```
Edit `/install_root/boot/efi/oslo/entries.ini` and `/install_root/boot/limine.cfg`
accordingly

97
README.md
View file

@ -1,67 +1,44 @@
# [Iglunix](https://iglunix.xyz/) # lazybox
Unix like software distribution with no GNU components Unix like software distribution with no GNU components
All build scripts are 0BSD Licensed. All build scripts are 0BSD Licensed.
To create an ISO from a non-iglunix OS please see https://github.com/iglunix/iglunix-autobuild
## Is this GNU/Linux ## TODO
No, GNU currently contributes roughly 10 MiB of code in the base system whilst, - Switch to different file system layout (follow standard)
LLVM and Linux both contribute approximately 1 GiB each. Instead we suggest that - Switch to making single utilities with busybox and toybox
one should refer to Igluinx running on the Linux kernel as LLVM/Musl/Linux. - LLVM (Work out how to split packages)
LLVM and Linux because they are the two largest packages and make up the - LLVM Sort out the symlinking madness
majority of the base system, and Musl to be explicit about the C library, - Linux kernel (no perl patch, byacc patch)
target triple and to differentiate it from any system using LLVM's libc - FreeBSD Kernel (bootloader?, syslinux should support it)
(which will may very well likely use in the future). - FreeBSD libc? Standalone build how? (rly need LLVM libc)
- Init system ( paralel shit and dependencies )
- QEMU for multiarch
## Instalation ## New File System Layout
See [INSTALL.md](INSTALL.md) __**NO LIB64 or LIB32**__
```
/bin
/boot
/dev
/etc
/home
/lib
/mnt
/opt
/proc
/root
/run
/sbin
/srv
/sys
/tmp
/usr
|--/bin
|--/include
|--/lib
|--<arch>-linux-musl => .
|--aarch64-linux-musl
## Discord /var
Join us at [link](https://discord.gg/NKB9qD2bMx) ```
<!--
## Status of Other Kernels
### FreeBSD
FreeBSD has solid upstream LLVM support which would make it ideal for iglunix.
However, I haven't been successful at building the required parts of the base
system.
### OpenBSD
Iglunix has been tested to work on OpenBSD. (don't forget to symlink `libc.so`
otherwise the toolchain breaks).
### Darwin
I have found no easy way of building libc on Darwin platforms as on yet.
Because of this I haven't got far at all porting Iglunix to Darwin
based systems such as MacOS and PureDarwin.
-->
## Web Browsers
Iglunix has Firefox ESR packaged requiring 2 extra GNU packages: `gm4` and
`autoconf`. Iglunix may switch to using a patched version of webkit gtk with
openssl and maybe ffmpeg replacing gstreamer.
## Replacements LUT
|standard tool | iglunix tool | use |
|--------------|--------------------|----------------------------------|
|glibc | musl | libc |
|glibc | libexecinfo | Backtrace functions |
|libstdc++ | libc++ | C++ standard library |
|libgcc | libunwind | Stack unwinding |
|libgcc | compiler-rt | Compiler builtins |
|bison | byacc | POSIX yacc |
|coreutils | toybox+busybox | POSIX utilities |
|gcc | clang | C++ compiler |
|zlib | zlib-ng | Compression library |
|gmake | bmake, others | POSIX Make implementation |
|ninja | samurai | Ninja build implementation |
|GNU M4 | OpenBSD M4 | POSIX M4 implementation |
|ncurses | netbsd-curses | X/Open Curses implementation |
|bash | mksh | Shell |
|Linux PAM | Open PAM | Pluggable Authentication Modules |
|sudo | doas | Privilege escalation |
|pkg-config | pkgconf | Package configuration tool |
|e2fsprogs | make_ext4fs | Make an ext4 file system |

7
bad/README.md
View file

@ -1,7 +0,0 @@
# Bad Packages
Bad packages are packages included that we want
to remove our dependency on. All of these packages
should eventually be removed.
- `autoconf` is required for building `firefox`
- `gmake` is required for building a number of packages

23
bad/autoconf/autoconf.sh.patch
View file

@ -1,23 +0,0 @@
--- a/autoconf.sh
+++ b/autoconf.sh
@@ -115,13 +115,14 @@
# Use the frozen version of Autoconf if available.
r= f=
# Some non-GNU m4's don't reject the --help option, so give them /dev/null.
-case `$M4 --help < /dev/null 2>&1` in
-*reload-state*) test -r $AC_MACRODIR/autoconf.m4f && { r=--reload f=f; } ;;
-*traditional*) ;;
-*) echo Autoconf requires GNU m4 1.1 or later >&2; rm -f $tmpin; exit 1 ;;
-esac
+# case `$M4 --help < /dev/null 2>&1` in
+# *reload-state*) test -r $AC_MACRODIR/autoconf.m4f && { r=--reload f=f; } ;;
+# *traditional*) ;;
+# *) echo Autoconf requires GNU m4 1.1 or later >&2; rm -f $tmpin; exit 1 ;;
+# esac
-$M4 -I$AC_MACRODIR $use_localdir $r autoconf.m4$f $infile > $tmpout ||
+# $M4 -I$AC_MACRODIR $use_localdir $r autoconf.m4$f $infile > $tmpout ||
+$M4 -g -D__GNU__ -I$AC_MACRODIR $use_localdir autoconf.m4 $infile -> $tmpout ||
{ rm -f $tmpin $tmpout; exit 2; }
# You could add your own prefixes to pattern if you wanted to check for

11
bad/autoconf/autoheader.sh.patch
View file

@ -1,11 +0,0 @@
--- autoconf-2.13/autoheader.sh
+++ old/autoheader.sh
@@ -122,7 +122,7 @@
# Extract assignments of SYMS, TYPES, FUNCS, HEADERS, and LIBS from the
# modified autoconf processing of the input file. The sed hair is
# necessary to win for multi-line macro invocations.
-eval "`$M4 -I$AC_MACRODIR $use_localdir $r autoheader.m4$f $infile |
+eval "`$M4 -g -D__gnu__ -I$AC_MACRODIR $use_localdir autoheader.m4 $infile |
sed -n -e '
: again
/^@@@.*@@@$/s/^@@@\(.*\)@@@$/\1/p

31
bad/autoconf/build.sh
View file

@ -1,31 +0,0 @@
pkgname=autoconf
pkgver=2.13
fetch() {
curl "https://ftp.gnu.org/gnu/autoconf/autoconf-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
cd $pkgname-$pkgver
patch -p1 < ../../makefile-m4f.patch
patch -p1 < ../../autoconf.sh.patch
patch -p1 < ../../autoheader.sh.patch
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr/bad/autoconf/ \
--build=$TRIPLE \
--host=$TRIPLE
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat COPYING
}

70
bad/autoconf/makefile-m4f.patch
View file

@ -1,70 +0,0 @@
--- src/autoconf-2.13/Makefile.in
+++ Makefile.in
@@ -33,8 +33,8 @@
# Programs that are ALWAYS installed (and are created in the build dir).
ASCRIPTS = autoconf autoheader autoreconf autoupdate ifnames
-# M4 input that is frozen.
-M4FROZEN = autoconf.m4f autoheader.m4f
+# Don't freeze anything with OpenBSD m4
+M4FROZEN =
# All programs, including those only installed if you have perl.
SCRIPTS = $(ASCRIPTS) @SCRIPTS@
--- a/Makefile.in
+++ b/Makefile.in
@@ -137,23 +137,23 @@
cd testsuite && ${MAKE} AUTOCONF=${bindir}/autoconf $@
installdirs:
- $(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(acdatadir)
+ $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)/$(bindir) $(DESTDIR)/$(acdatadir)
install: all $(M4FILES) acconfig.h installdirs install-info
for p in $(ASCRIPTS); do \
- $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed '$(transform)'`; \
+ $(INSTALL_PROGRAM) $$p $(DESTDIR)/$(bindir)/`echo $$p|sed '$(transform)'`; \
done
for i in $(M4FROZEN); do \
- $(INSTALL_DATA) $$i $(acdatadir)/$$i; \
+ $(INSTALL_DATA) $$i $(DESTDIR)/$(acdatadir)/$$i; \
done
for i in $(M4FILES) acconfig.h; do \
- $(INSTALL_DATA) $(srcdir)/$$i $(acdatadir)/$$i; \
+ $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)/$(acdatadir)/$$i; \
done
-if test -f autoscan; then \
- $(INSTALL_PROGRAM) autoscan $(bindir)/`echo autoscan|sed '$(transform)'`; \
+ $(INSTALL_PROGRAM) autoscan $(DESTDIR)/$(bindir)/`echo autoscan|sed '$(transform)'`; \
for i in acfunctions acheaders acidentifiers acprograms \
acmakevars; do \
- $(INSTALL_DATA) $(srcdir)/$$i $(acdatadir)/$$i; \
+ $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)/$(acdatadir)/$$i; \
done; \
else :; fi
@@ -161,11 +161,11 @@
install-info: info installdirs
if test -f autoconf.info; then \
for i in *.info*; do \
- $(INSTALL_DATA) $$i $(infodir)/$$i; \
+ $(INSTALL_DATA) $$i $(DESTDIR)/$(infodir)/$$i; \
done; \
else \
for i in $(srcdir)/*.info*; do \
- $(INSTALL_DATA) $$i $(infodir)/`echo $$i | sed 's|^$(srcdir)/||'`; \
+ $(INSTALL_DATA) $$i $(DESTDIR)/$(infodir)/`echo $$i | sed 's|^$(srcdir)/||'`; \
done; \
fi
--- a/Makefile.in
+++ b/Makefile.in
@@ -139,7 +139,7 @@
installdirs:
$(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)/$(bindir) $(DESTDIR)/$(infodir) $(DESTDIR)/$(acdatadir)
-install: all $(M4FILES) acconfig.h installdirs install-info
+install: all $(M4FILES) acconfig.h installdirs
for p in $(ASCRIPTS); do \
$(INSTALL_PROGRAM) $$p $(DESTDIR)/$(bindir)/`echo $$p|sed '$(transform)'`; \
done

28
bad/bad/build.sh
View file

@ -1,28 +0,0 @@
pkgname=bad
pkgver=main
fetch() {
curl -L "https://github.com/iglunix/bad/archive/refs/heads/main.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
}
build() {
cd $pkgname-$pkgver
[ -z "$WITH_CROSS" ] || export CFLAGS="$CFLAGS --target=$TRIPLE --sysroot=$WITH_CROSS_DIR"
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir PREFIX=/usr
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}
backup() {
return
}

31
bad/gm4/build.sh
View file

@ -1,31 +0,0 @@
pkgname=gm4
pkgver=1.4.19
fetch() {
curl "http://ftp.gnu.org/pub/gnu/m4/m4-$pkgver.tar.xz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mv m4-$pkgver gm4-$pkgver
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--build=$TRIPLE \
--program-prefix=g \
--host=$TRIPLE \
--disable-nls
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

54
bad/gmake/build.sh
View file

@ -1,54 +0,0 @@
pkgver=4.3
pkgname=gmake
pkgrel=1
deps="musl"
bad="gmake"
ext="doc:dev"
auto_cross
fetch() {
curl "https://ftp.gnu.org/gnu/make/make-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
mv make-$pkgver $pkgname-$pkgver
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr/bad/gmake \
--program-prefix=g \
--disable-nls \
--build=$HOST_TRIPLE \
--host=$TRIPLE
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
rm -r $pkgdir/usr/bad/gmake/share
rm -r $pkgdir/usr/bad/gmake/include
}
package_doc() {
cd $pkgname-$pkgver
make install DESDIR=$pkgdir
rm -r $pkgdir/usr/bad/gmake/bin
rm -r $pkgdir/usr/bad/gmake/share/info
rm -r $pkgdir/usr/bad/gmake/include
}
package_dev() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
rm -r $pkgdir/usr/bad/gmake/bin
rm -r $pkgdir/usr/bad/gmake/share
}
license() {
cd $pkgname-$pkgver
cat COPYING
}
backup() {
return
}

3
base/README.md
View file

@ -1,3 +0,0 @@
# Base Packages
These packages make up the base Iglunix system and are
included in all kernels

37
base/bmake/build.sh
View file

@ -1,37 +0,0 @@
pkgver=20220303
pkgname=bmake
mkdeps=""
deps=""
auto_cross
fetch() {
curl http://www.crufty.net/ftp/pub/sjg/bmake-$pkgver.tar.gz -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
mv $pkgname $pkgname-$pkgver
cd $pkgname-$pkgver
patch ./boot-strap < ../../no-test.patch
patch ./install-sh < ../../install.patch
}
build() {
cd $pkgname-$pkgver
./configure --prefix=/usr --with-default-sys-path=/usr/share/mk --build=$HOST_TRIPLE --host=$ARCH-linux-musl --with-machine-arch=$ARCH
MANTARGET=man sh ./make-bootstrap.sh
}
package() {
cd $pkgname-$pkgver
bmake -m ./mk install -f Makefile DESTDIR=$pkgdir MANTARGET=man prefix=/usr/ BINDIR=/usr/bin
ln -s bmake $pkgdir/usr/bin/make
rm -rf $pkgdir/usr/share/man/cat1
install -Dm644 ./bmake.1 $pkgdir/usr/share/man/man1
}
backup() {
return
}
license() {
cd $pkgname-$pkgver
cat LICENSE
}

11
base/bmake/no-test.patch
View file

@ -1,11 +0,0 @@
--- a/boot-strap
+++ b/boot-strap
@@ -420,7 +420,7 @@
op_test() {
[ -x bmake ] || op_build
- Bmake test "$@" || exit 1
+ #Bmake test "$@" || exit 1
}
op_clean() {

40
base/byacc/build.sh
View file

@ -1,40 +0,0 @@
pkgver=20220128
pkgname=byacc
deps="musl"
mkdeps="bmake"
bad=""
auto_cross
fetch() {
curl "ftp://ftp.invisible-island.net/byacc/byacc-$pkgver.tgz" -O
tar -xf $pkgname-$pkgver.tgz
# Merged upstream; Don't need
# cp ../reader-mesa.patch .
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--program-prefix=b \
--enable-btyacc \
--build=$HOST_TRIPLE \
--host=$TRIPLE
# patch -p1 < ../reader-mesa.patch
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
ln -sr $pkgdir/usr/bin/byacc $pkgdir/usr/bin/yacc
}
backup() {
return
}
license() {
cd $pkgname-$pkgver
cat LICENSE
}

11
base/byacc/reader-mesa.patch
View file

@ -1,11 +0,0 @@
--- a/reader.c
+++ b/reader.c
@@ -902,7 +902,7 @@
if (!lflag)
fprintf(text_file, line_format, lineno, input_file_name);
- puts_both("typedef union");
+ puts_both("typedef union YYSTYPE");
depth = 0;
loop:

59
base/cmake/build.sh
View file

@ -1,59 +0,0 @@
pkgver=3.23.1
pkgname=cmake
pkgrel=1
mkdeps="samurai"
deps=""
bad=""
ext=""
fetch() {
curl "https://cmake.org/files/v3.23/cmake-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
}
build() {
cd $pkgname-$pkgver
if [ -z "$WITH_CROSS" ]; then
./bootstrap \
--prefix=/usr \
--mandir=/share/man \
--datadir=/share/$pkgname \
--docdir=/share/doc/$pkgname \
--generator=Ninja \
--no-system-libs
else
mkdir -p build
cd build
cmake -G Ninja .. \
-DCMAKE_INSTALL_PREFIX=/usr \
-DCMAKE_SYSTEM_NAME=Linux \
-DCMAKE_SYSROOT=$WITH_CROSS_DIR \
-DCMAKE_C_COMPILER_TARGET=$TRIPLE \
-DCMAKE_CXX_COMPILER_TARGET=$TRIPLE \
-DCMAKE_ASM_COMPILER_TARGET=$TRIPLE \
-DHAVE_POLL_FINE_EXITCODE=OFF \
-DHAVE_POLL_FINE_EXITCODE__TRYRUN_OUTPUT=OFF \
-DCMAKE_PREFIX_PATH=$WITH_CROSS_DIR \
-DBUILD_CursesDialog=OFF
fi
samu
}
package() {
cd $pkgname-$pkgver
if [ ! -z "$WITH_CROSS" ]; then
cd build
fi
DESTDIR=$pkgdir samu install
}
backup() {
return
}
license() {
cd $pkgname-$pkgver
cat Copyright.txt
}

71
base/compiler-rt/build.sh
View file

@ -1,71 +0,0 @@
pkgname=compiler-rt
pkgver=14.0.1
deps=linux
fetch() {
curl -L "https://github.com/llvm/llvm-project/releases/download/llvmorg-$pkgver/compiler-rt-$pkgver.src.tar.xz" -o $pkgname-$pkgver.tar.xz
# for c++ headers
# curl -L "https://github.com/llvm/llvm-project/releases/download/llvmorg-$pkgver/libcxx-$pkgver.src.tar.xz" -o libcxx-$pkgver.tar.xz
# musl required for C headers
curl -O "http://musl.libc.org/releases/musl-1.2.2.tar.gz"
tar -xf $pkgname-$pkgver.tar.xz
mv $pkgname-$pkgver.src $pkgname-$pkgver
# tar -xf libcxx-$pkgver.tar.xz
# mv libcxx-$pkgver.src libcxx-$pkgver
# cp ../__config_site libcxx-$pkgver/include
mkdir $pkgname-$pkgver/build
tar -xf musl-1.2.2.tar.gz
cd musl-1.2.2
CFLAGS="--sysroot=/usr/$ARCH-linux-musl --target=$TRIPLE" ./configure --prefix=$(pwd)/../libc --target=$TRIPLE
bad --gmake gmake install-headers
}
build() {
cd $pkgname-$pkgver
cd build
cmake -G Ninja ../ \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=/usr/lib/clang/$pkgver/ \
-DCMAKE_INSTALL_LIBDIR=lib \
-DCMAKE_C_COMPILER_TARGET=$TRIPLE \
-DCMAKE_CXX_COMPILER_TARGET=$TRIPLE \
-DCMAKE_ASM_COMPILER_TARGET=$TRIPLE \
-DCMAKE_C_COMPILER_WORKS=ON \
-DCMAKE_CXX_COMPILER_WORKS=ON \
-DCMAKE_SYSROOT=/usr/$ARCH-linux-musl \
-DCMAKE_C_FLAGS_INIT="-I $(pwd)/../../libc/include " \
-DCMAKE_C_FLAGS="-I $(pwd)/../../libc/include" \
-DCMAKE_CXX_FLAGS_INIT="-I $(pwd)/../../libc/include" \
-DCMAKE_CXX_FLAGS="-I $(pwd)/../../libc/include" \
-DCOMPILER_RT_USE_BUILTINS_LIBRARY=OFF \
-DCOMPILER_RT_DEFAULT_TARGET_ONLY=OFF \
-DCOMPILER_RT_INCLUDE_TESTS=OFF \
-DCOMPILER_RT_BUILD_SANITIZERS=OFF \
-DCOMPILER_RT_BUILD_XRAY=OFF \
-DCOMPILER_RT_BUILD_MEMPROF=OFF \
-DCOMPILER_RT_BUILD_ORC=OFF \
-DCOMPILER_RT_INCLUDE_TESTS=OFF \
-DCOMPILER_RT_BUILD_LIBFUZZER=OFF \
-DCOMPILER_RT_DEFAULT_TARGET_ONLY=ON \
-DCOMPILER_RT_BUILD_PROFILE=OFF \
-DCAN_TARGET_$ARCH=ON \
-DCMAKE_SIZEOF_VOID_P=8
samu
}
package() {
cd $pkgname-$pkgver
cd build
DESTDIR=$pkgdir samu install
}
backup() {
return
}
license() {
cd $pkgname-$pkgver
cat LICENSE.TXT
}

36
base/curl/build.sh
View file

@ -1,36 +0,0 @@
pkgver=7.81.0
pkg_ver=$(echo $pkgver | tr '.' '_')
pkgname=curl
pkgrel=1
mkdeps=""
deps="openssl"
bad=""
auto_cross
fetch() {
curl -L "https://github.com/curl/curl/releases/download/curl-$pkg_ver/curl-$pkgver.tar.xz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
}
build() {
cd $pkgname-$pkgver
./configure --prefix=/usr \
--build=$HOST_TRIPLE \
--host=$TRIPLE \
--with-openssl
make
}
package() {
cd $pkgname-$pkgver
make DESTDIR=$pkgdir install
}
backup() {
return
}
license() {
cd $pkgname-$pkgver
cat COPYING
}

36
base/expat/build.sh
View file

@ -1,36 +0,0 @@
pkgver=2.2.10
pkgname=expat
bad=""
mkdeps="bmake"
deps=""
ext="dev"
auto_cross
fetch() {
pkgver_r=$(echo $pkgver | tr '.' '_')
curl -L https://github.com/libexpat/libexpat/releases/download/R_$pkgver_r/$pkgname-$pkgver.tar.xz -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--build=$HOST_TRIPLE \
--host=$TRIPLE
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat COPYING
}
backup() {
return
}

30
base/fakeroot/build.sh
View file

@ -1,30 +0,0 @@
pkgname=fakeroot
pkgver=1.26
fetch() {
curl "https://deb.debian.org/debian/pool/main/f/fakeroot/fakeroot_$pkgver.orig.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
patch -p1 < ../../no64.patch
patch -p1 < ../../stdint.patch
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--build=$TRIPLE \
--host=$TRIPLE
bad --gmake gmake
}
package() {
cd $pkgname-$pkgver
bad --gmake gmake install DESTDIR=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

17
base/fakeroot/no64.patch
View file

@ -1,17 +0,0 @@
--- a/libfakeroot.c
+++ b/libfakeroot.c
@@ -81,12 +81,14 @@
#define SEND_STAT64(a,b,c) send_stat64(a,b,c)
#define SEND_GET_STAT(a,b) send_get_stat(a,b)
#define SEND_GET_STAT64(a,b) send_get_stat64(a,b)
+#define SEND_GET_XATTR(a,b,c) send_get_xattr(a,b,c)
#define SEND_GET_XATTR64(a,b,c) send_get_xattr64(a,b,c)
#else
#define SEND_STAT(a,b,c) send_stat(a,b)
#define SEND_STAT64(a,b,c) send_stat64(a,b)
#define SEND_GET_STAT(a,b) send_get_stat(a)
#define SEND_GET_STAT64(a,b) send_get_stat64(a)
+#define SEND_GET_XATTR(a,b,c) send_get_xattr(a,b)
#define SEND_GET_XATTR64(a,b,c) send_get_xattr64(a,b)
#endif

34
base/fakeroot/stdint.patch
View file

@ -1,34 +0,0 @@
--- a/faked.c
+++ b/faked.c
@@ -514,11 +514,11 @@
#ifdef FAKEROOT_DB_PATH
if (find_path(i->buf.dev, i->buf.ino, roots, path))
- fprintf(f,"mode=%llo,uid=%llu,gid=%llu,nlink=%llu,rdev=%llu %s\n",
+ fprintf(f,"mode=%"PRIo64",uid=%"PRIu64",gid=%"PRIu64",nlink=%"PRIu64",rdev=%"PRIu64" %s\n",
(uint64_t) i->buf.mode,(uint64_t) i->buf.uid,(uint64_t) i->buf.gid,
(uint64_t) i->buf.nlink,(uint64_t) i->buf.rdev,path);
#else
- fprintf(f,"dev=%llx,ino=%llu,mode=%llo,uid=%llu,gid=%llu,nlink=%llu,rdev=%llu\n",
+ fprintf(f,"dev=%"PRIx64",ino=%"PRIu64",mode=%"PRIo64",uid=%"PRIu64",gid=%"PRIu64",nlink=%"PRIu64",rdev=%"PRIu64"\n",
(uint64_t) i->buf.dev,(uint64_t) i->buf.ino,(uint64_t) i->buf.mode,
(uint64_t) i->buf.uid,(uint64_t) i->buf.gid,(uint64_t) i->buf.nlink,
(uint64_t) i->buf.rdev);
@@ -544,7 +544,7 @@
while(1){
#ifdef FAKEROOT_DB_PATH
- r=scanf("mode=%llo,uid=%llu,gid=%llu,nlink=%llu,rdev=%llu "DB_PATH_SCAN"\n",
+ r=scanf("mode=%"PRIo64",uid=%"PRIu64",gid=%"PRIu64",nlink=%"PRIu64",rdev=%"PRIu64" "DB_PATH_SCAN"\n",
&stmode, &stuid, &stgid, &stnlink, &strdev, &path);
if (r != 6)
break;
@@ -559,7 +559,7 @@
stdev = path_st.st_dev;
stino = path_st.st_ino;
#else
- r=scanf("dev=%llx,ino=%llu,mode=%llo,uid=%llu,gid=%llu,nlink=%llu,rdev=%llu\n",
+ r=scanf("dev=%"PRIx64",ino=%"PRIu64",mode=%"PRIo64",uid=%"PRIu64",gid=%"PRIu64",nlink=%"PRIu64",rdev=%"PRIu64"\n",
&stdev, &stino, &stmode, &stuid, &stgid, &stnlink, &strdev);
if (r != 7)
break;

36
base/flex/build.sh
View file

@ -1,36 +0,0 @@
pkgname=flex
pkgver=2.6.4
auto_cross
fetch() {
curl -L "https://github.com/westes/flex/releases/download/v2.6.4/flex-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
}
build() {
cd $pkgname-$pkgver
[ -z "$WITH_CROSS" ] || extra_flags=--disable-bootstrap
./configure \
--prefix=/usr \
--build=$HOST_TRIPLE \
--host=$TRIPLE \
$extra_flags
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
ln -sr $pkgdir/usr/bin/flex $pkgdir/usr/bin/lex
}
license() {
cd $pkgname-$pkgver
cat COPYING
}
backup() {
return
}

29
base/gettext-tiny/build.sh
View file

@ -1,29 +0,0 @@
pkgname=gettext-tiny
pkgver=master
deps=""
auto_cross
fetch() {
curl -L "https://github.com/sabotage-linux/gettext-tiny/archive/master.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
}
build() {
cd $pkgname-$pkgver
bad --gmake gmake
}
package() {
cd $pkgname-$pkgver
bad --gmake gmake install DESTDIR=$pkgdir prefix=/usr
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}
backup() {
return
}

38
base/git/build.sh
View file

@ -1,38 +0,0 @@
pkgver=2.32.0
pkgname=git
pkgrel=1
mkdeps="zlib-ng-dev:curl-dev:gmake"
deps="zlib-ng:curl"
bad="gmake"
ext="doc"
fetch() {
curl "https://mirrors.edge.kernel.org/pub/software/scm/git/git-$pkgver.tar.xz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
# gmake NO_PERL=1 NO_REGEX=NeedsStartEnd NO_TCLTK=1 NO_MSGFMT_EXTENDED_OPTIONS=1 prefix=/usr gitexecdir=lib/gitcore INSTALL_SYMLINKS=1
bad --gmake gmake NO_REGEX=NeedsStartEnd NO_TCLTK=1 NO_MSGFMT_EXTENDED_OPTIONS=1 prefix=/usr gitexecdir=lib/gitcore INSTALL_SYMLINKS=1
# Need to run twice for it to work ¯\_(ツ)_/¯
# Some issue with `msgfmt` 'cause I'm using gettext-tiny but idk why it works on the second run
# gmake NO_PERL=1 NO_REGEX=NeedsStartEnd NO_TCLTK=1 NO_MSGFMT_EXTENDED_OPTIONS=1 prefix=/usr gitexecdir=lib/gitcore INSTALL_SYMLINKS=1
bad --gmake gmake NO_REGEX=NeedsStartEnd NO_TCLTK=1 NO_MSGFMT_EXTENDED_OPTIONS=1 prefix=/usr gitexecdir=lib/gitcore INSTALL_SYMLINKS=1
}
package() {
cd $pkgname-$pkgver
# gmake NO_PERL=1 NO_REGEX=NeedsStartEnd NO_TCLTK=1 NO_MSGFMT_EXTENDED_OPTIONS=1 install prefix=/usr gitexecdir=lib/gitcore DESTDIR=$pkgdir INSTALL_SYMLINKS=1
bad --gmake gmake NO_REGEX=NeedsStartEnd NO_TCLTK=1 NO_MSGFMT_EXTENDED_OPTIONS=1 install prefix=/usr gitexecdir=lib/gitcore DESTDIR=$pkgdir INSTALL_SYMLINKS=1
}
package_doc() {
# gmake NO_PERL=1 NO_REGEX=NeedsStartEnd NO_TCLTK=1 NO_MSGFMT_EXTENDED_OPTIONS=1 install-man prefix=/usr DESTDIR=$pkgdir INSTALL_SYMLINKS=1
bad --gmake gmake NO_REGEX=NeedsStartEnd NO_TCLTK=1 NO_MSGFMT_EXTENDED_OPTIONS=1 install-man prefix=/usr DESTDIR=$pkgdir INSTALL_SYMLINKS=1
}
license() {
cd $pkgname-$pkgver
cat COPYING
}

47
base/iglunix/build.sh
View file

@ -1,47 +0,0 @@
pkgver=main
pkgname=iglunix
pkgrel=1
deps="busybox:toybox"
bad=""
ext="dev:doc"
fetch() {
mkdir $pkgname-$pkgver
cp ../profile.sh .
cp ../motd .
cd $pkgname-$pkgver
cp ../../../../scripts/iglu*.sh .
cp ../../../../man/iglu.8 .
cp ../../../../LICENSE .
}
build() {
cd $pkgname-$pkgver
echo "Nothing to do"
}
package() {
cd $pkgname-$pkgver
install -d $pkgdir/etc/
install -Dm644 ../profile.sh $pkgdir/etc/profile
install -Dm644 ../motd $pkgdir/etc/
install -d $pkgdir/usr/sbin
install -Dm755 iglu.sh $pkgdir/usr/sbin/iglu
}
package_dev() {
cd $pkgname-$pkgver
install -d $pkgdir/usr/bin
install -Dm755 iglupkg.sh $pkgdir/usr/bin/iglupkg
}
package_doc() {
cd $pkgname-$pkgver
install -d $pkgdir/usr/share/man/man8
install -Dm644 iglu.8 $pkgdir/usr/share/man/man8
}
license() {
cd $pkgname-$pkgver
cat LICENSE
}

14
base/iglunix/motd
View file

@ -1,14 +0,0 @@
|
| |
|
| ________
| /\ | \
/ \ | \ |
/ \ \ |
/ \________\
\ / /
\ / /
\ / /
\/________/
Iglunix: Drop the Packages

20
base/iglunix/profile.sh
View file

@ -1,20 +0,0 @@
# Setup Path
export PATH=/usr/sbin:/usr/bin:/sbin:/bin
export POSIX_ME_HARDER=1
# Setup Shell Prompt
if [ "$(whoami)" == "root" ]; then
export PS1=$(hostname)"# "
else
export PS1=$(hostname)"$ "
fi
# Replace TERM with xterm because netbsd-curses doesn't include alacritty
if [ "$TERM" == "alacritty" ]; then
export TERM=xterm
fi
# load profile
for file in $(ls /etc/profile.d); do
. /etc/profile.d/$file
done

25
base/iglupkg/build.sh
View file

@ -1,25 +0,0 @@
pkgname=iglupkg
pkgver=main
fetch() {
curl -L "https://github.com/iglunix/iglupkg/archive/refs/heads/main.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
return
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir PREFIX=/usr
}
license() {
cd $pkgname-$pkgver
return
}
backup() {
return
}

28
base/lc-make/build.sh
View file

@ -1,28 +0,0 @@
pkgname=lc-make
pkgver=main
mkdeps="rust"
deps=""
fetch() {
curl -L "https://github.com/LightningCreations/lc-make/archive/refs/heads/main.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
cd $pkgname-$pkgver
mkdir .cargo
cargo vendor > .cargo/config
}
build() {
cd $pkgname-$pkgver
cargo build --release --locked --all-features
}
package() {
cd $pkgname-$pkgver
install -Dm755 target/release/$pkgname $pkgdir/usr/bin/
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

63
base/libcxx/build.sh
View file

@ -1,63 +0,0 @@
pkgver=14.0.1
pkgname=libcxx
bad=""
ext="dev"
fetch() {
curl -L "https://github.com/llvm/llvm-project/releases/download/llvmorg-$pkgver/llvm-project-$pkgver.src.tar.xz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mv llvm-project-$pkgver.src $pkgname-$pkgver
}
build() {
cd $pkgname-$pkgver
PREFIX=/usr
[ -z "$FOR_CROSS" ] || PREFIX=$FOR_CROSS_DIR
[ -z "$WITH_CROSS" ] || cmake_extra_flags=-DCMAKE_SYSROOT=$WITH_CROSS_DIR
mkdir -p build
cd build
cmake -G Ninja -Wno-dev \
-DLLVM_ENABLE_RUNTIMES="libcxx;libcxxabi" \
-DLIBCXX_ENABLE_FILESYSTEM=ON \
-DLIBCXX_USE_COMPILER_RT=ON \
-DLIBCXX_HAS_MUSL_LIBC=ON \
-DLIBCXXABI_USE_COMPILER_RT=ON \
-DLIBCXXABI_USE_LLVM_UNWINDER=ON \
-DLIBCXX_ENABLE_STATIC=OFF \
-DLIBCXX_HAS_ATOMIC_LIB=OFF \
-DCMAKE_C_COMPILER=$CC \
-DCMAKE_CXX_COMPILER=$CXX \
-DCMAKE_C_COMPILER_TARGET=$ARCH-linux-musl \
-DCMAKE_CXX_COMPILER_TARGET=$ARCH-linux-musl \
-DCMAKE_C_FLAGS="$CFLAGS" \
-DCMAKE_CXX_FLAGS="$CXXFLAGS" \
$cmake_extra_flags \
-DCMAKE_INSTALL_PREFIX=$PREFIX \
-DCMAKE_CXX_COMPILER_WORKS=1 \
-DCMAKE_SKIP_BUILD_RPATH=0 \
-DCMAKE_BUILD_WITH_INSTALL_RPATH=1 \
-DCMAKE_INSTALL_RPATH='${ORIGIN}/../lib' \
../runtimes
samu -j$JOBS
}
package() {
cd $pkgname-$pkgver
cd build
DESTDIR=$pkgdir samu install
}
backup() {
return
}
package_dev() {
echo "No... Shut"
}
license() {
cd $pkgname-$pkgver
cat */LICENSE.TXT
}

47
base/libelf/build.sh
View file

@ -1,47 +0,0 @@
pkgname=libelf
pkgver=0.186
auto_cross
fetch() {
curl -LO "https://sourceware.org/elfutils/ftp/$pkgver/elfutils-$pkgver.tar.bz2"
tar -xf elfutils-$pkgver.tar.bz2
cd elfutils-$pkgver
patch -p1 < ../../musl.patch
}
if [ -z "$FOR_CROSS" ]; then
PREFIX=/usr
else
PREFIX=$FOR_CROSS_DIR
fi
build() {
cd elfutils-$pkgver
export CFLAGS="$CFLAGS -Wno-error"
./configure \
--prefix=$PREFIX \
--sysconfdir=/etc \
--build=$HOST_TRIPLE \
--host=$TRIPLE \
--disable-symbol-versioning \
--disable-debuginfod \
--disable-libdebuginfod \
--disable-nls \
ac_cv_c99=yes
bad --gmake gmake -C lib
bad --gmake gmake -C libelf
}
package() {
cd elfutils-$pkgver
bad --gmake gmake -C libelf install DESTDIR=$pkgdir
}
backup() {
return
}
license() {
return
}

59
base/libelf/musl.patch
View file

@ -1,59 +0,0 @@
diff --git a/configure b/configure
index d03dab4..7fc88bd 100755
--- a/configure
+++ b/configure
@@ -7758,7 +7758,7 @@ LIBS="$saved_LIBS"
case "$ac_cv_search_argp_parse" in
no) { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to find argp_parse
+: $? "failed to find argp_parse
See \`config.log' for more details" "$LINENO" 5; } ;;
-l*) argp_LDADD="$ac_cv_search_argp_parse" ;;
*) argp_LDADD= ;;
@@ -7826,7 +7826,7 @@ LIBS="$saved_LIBS"
case "$ac_cv_search_fts_close" in
no) { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to find fts_close
+: $? "failed to find fts_close
See \`config.log' for more details" "$LINENO" 5; } ;;
-l*) fts_LIBS="$ac_cv_search_fts_close" ;;
*) fts_LIBS= ;;
@@ -7894,7 +7894,7 @@ LIBS="$saved_LIBS"
case "$ac_cv_search__obstack_free" in
no) { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to find _obstack_free
+: $? "failed to find _obstack_free
See \`config.log' for more details" "$LINENO" 5; } ;;
-l*) obstack_LIBS="$ac_cv_search__obstack_free" ;;
*) obstack_LIBS= ;;
diff --git a/lib/Makefile.in b/lib/Makefile.in
index 41ff5f7..0c81496 100644
--- a/lib/Makefile.in
+++ b/lib/Makefile.in
@@ -117,8 +117,8 @@ libeu_a_AR = $(AR) $(ARFLAGS)
libeu_a_LIBADD =
am_libeu_a_OBJECTS = xasprintf.$(OBJEXT) xstrdup.$(OBJEXT) \
xstrndup.$(OBJEXT) xmalloc.$(OBJEXT) next_prime.$(OBJEXT) \
- crc32.$(OBJEXT) crc32_file.$(OBJEXT) color.$(OBJEXT) \
- error.$(OBJEXT) printversion.$(OBJEXT)
+ crc32.$(OBJEXT) crc32_file.$(OBJEXT) \
+ error.$(OBJEXT)
libeu_a_OBJECTS = $(am_libeu_a_OBJECTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
@@ -406,10 +406,10 @@ textrel_check = if $(READELF) -d $@ | fgrep -q TEXTREL; then $(textrel_found); f
noinst_LIBRARIES = libeu.a
libeu_a_SOURCES = xasprintf.c xstrdup.c xstrndup.c xmalloc.c next_prime.c \
crc32.c crc32_file.c \
- color.c error.c printversion.c
+ error.c
noinst_HEADERS = fixedsizehash.h libeu.h system.h dynamicsizehash.h list.h \
- eu-config.h color.h printversion.h bpf.h \
+ eu-config.h bpf.h \
atomics.h stdatomic-fbsd.h dynamicsizehash_concurrent.h
EXTRA_DIST = dynamicsizehash.c dynamicsizehash_concurrent.c

37
base/libffi/build.sh
View file

@ -1,37 +0,0 @@
pkgver=3.3
pkgname=libffi
bad="gmake"
ext="dev"
auto_cross
fetch() {
curl -L "https://github.com/libffi/libffi/releases/download/v3.3/libffi-3.3.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
}
build() {
cd $pkgname-$pkgver
./configure --prefix=$PREFIX \
--build=$HOST_TRIPLE \
--host=$TRIPLE
bad --gmake gmake
}
package() {
cd $pkgname-$pkgver
bad --gmake gmake install DESTDIR=$pkgdir
}
package_dev() {
cd $pkgname-$pkgver
bad --gmake gmake install DESTDIR=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat LICENSE
}
backup() {
return
}

22
base/libnl-tiny/build.sh
View file

@ -1,22 +0,0 @@
pkgname=libnl-tiny
pkgver=master
fetch() {
curl -L "https://github.com/sabotage-linux/libnl-tiny/archive/refs/heads/master.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
cd $pkgname-$pkgver
}
build() {
cd $pkgname-$pkgver
bad --gmake gmake prefix=/usr all CC=cc
}
package() {
cd $pkgname-$pkgver
bad --gmake gmake prefix=/usr DESTDIR=$pkgdir install
}
license() {
curl "https://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt"
}

11
base/libnl-tiny/cmake-no-extra-errs.patch
View file

@ -1,11 +0,0 @@
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -5,7 +5,7 @@
INCLUDE_DIRECTORIES(include)
-ADD_DEFINITIONS(-Wall -Werror -Wextra -Wno-unused-parameter)
+#ADD_DEFINITIONS(-Wall -Werror -Wextra -Wno-unused-parameter)
STRING(REPLACE "-DNDEBUG" "" CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE}")
ADD_LIBRARY(nl-tiny SHARED

70
base/libunwind/build.sh
View file

@ -1,70 +0,0 @@
pkgver=14.0.1
pkgname=libunwind
bad=""
ext="dev"
fetch() {
curl -L "https://github.com/llvm/llvm-project/releases/download/llvmorg-$pkgver/llvm-project-$pkgver.src.tar.xz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mv llvm-project-$pkgver.src $pkgname-$pkgver
}
build() {
cd $pkgname-$pkgver
PREFIX=/usr
[ -z "$FOR_CROSS" ] || PREFIX=$FOR_CROSS_DIR
if [ ! -z "$WITH_CROSS" ]; then
cmake_extra_flags=-DCMAKE_SYSROOT=$WITH_CROSS_DIR
fi
mkdir -p build
cd build
cmake -G Ninja -Wno-dev \
-DLLVM_ENABLE_RUNTIMES="libunwind" \
-DLIBUNWIND_USE_COMPILER_RT=ON \
-DLIBUNWIND_SUPPORTS_FNO_EXCEPTIONS_FLAG=1 \
-DLIBCXXABI_USE_LLVM_UNWINDER=YES \
-DLIBCXX_HAS_MUSL_LIBC=ON \
-DCMAKE_ASM_COMPILER=$CC \
-DCMAKE_C_COMPILER=$CC \
-DCMAKE_CXX_COMPILER=$CXX \
-DCMAKE_ASM_COMPILER_TARGET=$ARCH-linux-musl \
-DCMAKE_C_COMPILER_TARGET=$ARCH-linux-musl \
-DCMAKE_CXX_COMPILER_TARGET=$ARCH-linux-musl \
-DCMAKE_C_FLAGS="$CFLAGS" \
-DCMAKE_CXX_FLAGS="$CXXFLAGS" \
-DCMAKE_ASM_FLAGS="$CFLAGS" \
-DCMAKE_SHARED_LINKER_FLAGS="$LDFLAGS -unwindlib=none" \
$cmake_extra_flags \
-DCMAKE_INSTALL_PREFIX=$PREFIX \
-DCMAKE_C_COMPILER_WORKS=1 \
-DCMAKE_CXX_COMPILER_WORKS=1 \
-DCMAKE_SKIP_BUILD_RPATH=0 \
-DCMAKE_BUILD_WITH_INSTALL_RPATH=1 \
-DCMAKE_INSTALL_RPATH='${ORIGIN}/../lib' \
../runtimes
samu -j$JOBS
}
package() {
cd $pkgname-$pkgver
cd build
DESTDIR=$pkgdir samu install
}
backup() {
return
}
package_dev() {
echo "No... Shut"
}
license() {
cd $pkgname-$pkgver
cat */LICENSE.TXT
}

150
base/llvm/build.sh
View file

@ -1,150 +0,0 @@
pkgver=14.0.1
pkgname=llvm
bad=""
ext="dev"
fetch() {
curl -L "https://github.com/llvm/llvm-project/releases/download/llvmorg-$pkgver/llvm-project-$pkgver.src.tar.xz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
mv llvm-project-$pkgver.src $pkgname-$pkgver
cd $pkgname-$pkgver
patch -p1 < ../../riscv-relax.patch
}
build() {
cd $pkgname-$pkgver
if [ ! -z "$WITH_CROSS" ]; then
EXTRA_ARGS="-DCMAKE_SYSROOT=$WITH_CROSS_DIR \
-DCMAKE_C_COMPILER_WORKS=ON \
-DCMAKE_CXX_COMPILER_WORKS=ON \
-DCMAKE_SYSTEM_NAME=Linux \
-DLLVM_TABLEGEN=$(pwd)/host-build/bin/llvm-tblgen \
-DCLANG_TABLEGEN=$(pwd)/host-build/bin/clang-tblgen \
-DLLVM_CONFIG_PATH=/usr/bin/llvm-config \
-DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM=NEVER \
-DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY \
-DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY"
mkdir -p host-build
cd host-build
cmake -G Ninja -Wno-dev \
-DLLVM_ENABLE_PROJECTS='clang' \
-DCMAKE_C_COMPILER=cc \
-DCMAKE_CXX_COMPILER=c++ \
../llvm
samu llvm-tblgen clang-tblgen
cd ..
fi
mkdir -p build
cd build
cmake -G Ninja -Wno-dev \
-DCMAKE_C_COMPILER_TARGET=$TRIPLE \
-DCMAKE_CXX_COMPILER_TARGET=$TRIPLE \
-DCMAKE_C_COMPILER=$CC \
-DCMAKE_CXX_COMPILER=$CXX \
-DCMAKE_INSTALL_PREFIX=/usr \
-DCMAKE_BUILD_TYPE=Release \
-DLLVM_VERSION_SUFFIX="" \
-DLLVM_APPEND_VC_REV=OFF \
-DLLVM_ENABLE_PROJECTS="llvm;lld;clang" \
-DLLVM_ENABLE_LLD=ON \
-DLLVM_TARGETS_TO_BUILD="all" \
-DLLVM_INSTALL_BINUTILS_SYMLINKS=ON \
-DLLVM_INSTALL_CCTOOLS_SYMLINKS=ON \
-DLLVM_INCLUDE_EXAMPLES=OFF \
-DLLVM_ENABLE_PIC=ON \
-DLLVM_ENABLE_LTO=OFF \
-DLLVM_INCLUDE_GO_TESTS=OFF \
-DLLVM_INCLUDE_TESTS=OFF \
-DLLVM_HOST_TRIPLE=$TRIPLE \
-DLLVM_DEFAULT_TARGET_TRIPLE=$TRIPLE \
-DLLVM_ENABLE_LIBXML2=OFF \
-DLLVM_ENABLE_ZLIB=OFF\
-DLLVM_BUILD_LLVM_DYLIB=ON \
-DLLVM_LINK_LLVM_DYLIB=ON \
-DLLVM_OPTIMIZED_TABLEGEN=ON \
-DLLVM_INCLUDE_BENCHMARKS=OFF \
-DLLVM_INCLUDE_DOCS=ON \
-DLLVM_TOOL_LLVM_ITANIUM_DEMANGLE_FUZZER_BUILD=OFF \
-DLLVM_TOOL_LLVM_MC_ASSEMBLE_FUZZER_BUILD=OFF \
-DLLVM_TOOL_LLVM_MC_DISASSEMBLE_FUZZER_BUILD=OFF \
-DLLVM_TOOL_LLVM_OPT_FUZZER_BUILD=OFF \
-DLLVM_TOOL_LLVM_MICROSOFT_DEMANGLE_FUZZER_BUILD=OFF \
-DLLVM_TOOL_LLVM_GO_BUILD=OFF \
-DLLVM_INSTALL_UTILS=ON \
-DLLVM_ENABLE_LIBCXX=ON \
-DLLVM_STATIC_LINK_CXX_STDLIB=ON \
-DLLVM_ENABLE_LIBEDIT=OFF \
-DLLVM_ENABLE_TERMINFO=OFF \
-DLIBCXX_ENABLE_FILESYSTEM=ON \
-DLIBCXX_USE_COMPILER_RT=ON \
-DLIBCXX_HAS_MUSL_LIBC=ON \
-DLIBCXX_ENABLE_STATIC_ABI_LIBRARY=ON \
-DLIBCXX_STATICALLY_LINK_ABI_IN_SHARED_LIBRARY=ON \
-DLIBCXX_STATICALLY_LINK_ABI_IN_STATIC_LIBRARY=ON \
-DLIBCXX_INSTALL_LIBRARY=ON \
-DLIBCXXABI_ENABLE_ASSERTIONS=ON \
-DLIBCXXABI_USE_COMPILER_RT=ON \
-DLIBCXXABI_USE_LLVM_UNWINDER=ON \
-DLIBCXXABI_ENABLE_STATIC_UNWINDER=ON \
-DLIBCXXABI_STATICALLY_LINK_UNWINDER_IN_SHARED_LIBRARY=YES \
-DLIBCXXABI_ENABLE_SHARED=OFF \
-DLIBCXXABI_ENABLE_STATIC=ON \
-DLIBCXXABI_INSTALL_LIBRARY=ON \
-DLIBUNWIND_ENABLE_SHARED=ON \
-DLIBUNWIND_ENABLE_STATIC=ON \
-DLIBUNWIND_INSTALL_LIBRARY=ON \
-DLIBUNWIND_USE_COMPILER_RT=ON \
-DCLANG_DEFAULT_LINKER=lld \
-DCLANG_DEFAULT_CXX_STDLIB='libc++' \
-DCLANG_DEFAULT_RTLIB=compiler-rt \
-DCLANG_DEFAULT_UNWINDLIB=libunwind \
-DCLANG_VENDOR="Iglunix" \
-DCLANG_ENABLE_STATIC_ANALYZER=OFF \
-DCLANG_ENABLE_ARCMT=OFF \
-DCLANG_LINK_CLANG_DYLIB=OFF \
-DCLANG_TOOLING_BUILD_AST_INTROSPECTION=OFF \
-DCOMPILER_RT_USE_BUILTINS_LIBRARY=OFF \
-DCOMPILER_RT_DEFAULT_TARGET_ONLY=OFF \
-DCOMPILER_RT_INCLUDE_TESTS=OFF \
-DCOMPILER_RT_BUILD_SANITIZERS=OFF \
-DCOMPILER_RT_BUILD_XRAY=OFF \
-DCOMPILER_RT_BUILD_MEMPROF=OFF \
-DCOMPILER_RT_INCLUDE_TESTS=OFF \
-DCOMPILER_RT_BUILD_LIBFUZZER=OFF \
-DENABLE_EXPERIMENTAL_NEW_PASS_MANAGER=TRUE \
$EXTRA_ARGS \
-DHAVE_CXX_ATOMICS_WITHOUT_LIB=ON \
-DHAVE_CXX_ATOMICS64_WITHOUT_LIB=ON \
../llvm
samu -j$JOBS
}
package() {
cd $pkgname-$pkgver
cd build
DESTDIR=$pkgdir samu install
ln -s clang $pkgdir/usr/bin/cc
ln -s clang $pkgdir/usr/bin/c89
ln -s clang $pkgdir/usr/bin/c99
ln -s clang++ $pkgdir/usr/bin/c++
ln -s ld.lld $pkgdir/usr/bin/ld
}
backup() {
return
}
package_dev() {
echo "No... Shut"
}
license() {
cd $pkgname-$pkgver
cat */LICENSE.TXT
}

5
base/llvm/default.llvm.conf
View file

@ -1,5 +0,0 @@
#Uncomment this to get the latest release candiate
#export RC
#Uncomment this to get the latest git version
#export GIT

17
base/llvm/riscv-relax.patch
View file

@ -1,17 +0,0 @@
diff --git a/clang/lib/Driver/ToolChains/Arch/RISCV.cpp b/clang/lib/Driver/ToolChains/Arch/RISCV.cpp
index 8c343b869..65c357e86 100644
--- a/clang/lib/Driver/ToolChains/Arch/RISCV.cpp
+++ b/clang/lib/Driver/ToolChains/Arch/RISCV.cpp
@@ -426,11 +426,7 @@ void riscv::getRISCVTargetFeatures(const Driver &D, const llvm::Triple &Triple,
if (Args.hasArg(options::OPT_ffixed_x31))
Features.push_back("+reserve-x31");
- // -mrelax is default, unless -mno-relax is specified.
- if (Args.hasFlag(options::OPT_mrelax, options::OPT_mno_relax, true))
- Features.push_back("+relax");
- else
- Features.push_back("-relax");
+ Features.push_back("-relax");
// GCC Compatibility: -mno-save-restore is default, unless -msave-restore is
// specified...

25
base/man-pages-posix/build.sh
View file

@ -1,25 +0,0 @@
pkgname=man-pages-posix
pkgver=2017
fetch() {
curl "https://mirrors.edge.kernel.org/pub/linux/docs/man-pages/man-pages-posix/man-pages-posix-2017-a.tar.xz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
return
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
}
backup() {
return
}
license() {
cd $pkgname-$pkgver
cat POSIX-COPYRIGHT
}

31
base/meson/build.sh
View file

@ -1,31 +0,0 @@
pkgver=0.60.2
pkgname=meson
deps=python
bad=""
fetch() {
curl -L "https://github.com/mesonbuild/meson/releases/download/$pkgver/meson-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
cp ../not-darwin.patch .
cd $pkgname-$pkgver
patch -p1 < ../not-darwin.patch
}
build() {
cd $pkgname-$pkgver
python setup.py build
}
package() {
cd $pkgname-$pkgver
python setup.py install --prefix=/usr --root=$pkgdir
}
backup() {
return
}
license() {
cd $pkgname-$pkgver
cat COPYING
}

19
base/meson/not-darwin.patch
View file

@ -1,19 +0,0 @@
--- a/mesonbuild/scripts/depfixer.py
+++ b/mesonbuild/scripts/depfixer.py
@@ -16,6 +16,7 @@
import sys, struct
import shutil, subprocess
import typing as T
+import platform
from ..mesonlib import OrderedSet
@@ -478,7 +479,7 @@
# https://github.com/mesonbuild/meson/pull/6612#discussion_r378581401
if INSTALL_NAME_TOOL is False:
INSTALL_NAME_TOOL = bool(shutil.which('install_name_tool'))
- if INSTALL_NAME_TOOL:
+ if INSTALL_NAME_TOOL and platform.system() == "Darwin":
if isinstance(new_rpath, bytes):
new_rpath = new_rpath.decode('utf8')
fix_darwin(fname, new_rpath, final_path, install_name_mappings)

32
base/netbsd-curses/build.sh
View file

@ -1,32 +0,0 @@
pkgver=master
pkgname=netbsd-curses
bad="gmake"
deps="musl"
ext="doc:dev"
auto_cross
fetch() {
curl -L "https://github.com/sabotage-linux/netbsd-curses/archive/master.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
cd $pkgname-$pkgver
patch -p1 < ../../cross.patch
}
build() {
cd $pkgname-$pkgver
bad --gmake gmake PREFIX=/usr HOSTCC=cc CROSSCOMPILING=1 LDFLAGS_HOST= CFLAGS_HOST=
}
package() {
cd $pkgname-$pkgver
bad --gmake gmake install DESTDIR=$pkgdir PREFIX=/usr HOSTCC=cc CROSSCOMPILING=1 LDFLAGS_HOST= CFLAGS_HOST=
}
backup() {
return
}
license() {
cd $pkgname-$pkgver
cat COPYING
}

47
base/netbsd-curses/cross.patch
View file

@ -1,47 +0,0 @@
--- a/GNUmakefile
+++ b/GNUmakefile
@@ -477,7 +477,7 @@
$(RANLIB) $@
$(TI_LIBSO): $(TI_LOBJS)
- $(CC) -shared -o $@ $^ -Wl,-soname=$(notdir $@)
+ $(CC) $(LDFLAGS) -shared -o $@ $^ -Wl,-soname=$(notdir $@)
libterminfo/hash.c: libterminfo/genhash libterminfo/term.h
@echo "Generating terminfo hash"
@@ -514,7 +514,7 @@
$(CU_LIBSO): $(TI_LIBSO)
$(CU_LIBSO): $(CU_LOBJS)
- $(CC) -shared -o $@ $^ -Wl,-soname=$(notdir $@)
+ $(CC) $(LDFLAGS) -shared -o $@ $^ -Wl,-soname=$(notdir $@)
libcurses/fileio.h: libcurses/shlib_version libcurses/genfileioh.awk
$(AWK) -f ./genfileioh.awk < ./shlib_version > ./fileio.h
@@ -526,7 +526,7 @@
$(PA_LIBSO): $(CU_LIBSO)
$(PA_LIBSO): $(PA_LOBJS)
- $(CC) -shared -o $@ $^ -Wl,-soname=$(notdir $@)
+ $(CC) $(LDFLAGS) -shared -o $@ $^ -Wl,-soname=$(notdir $@)
$(ME_LIBA): $(ME_OBJS)
rm -f $@
@@ -535,7 +535,7 @@
$(ME_LIBSO): $(CU_LIBSO)
$(ME_LIBSO): $(ME_LOBJS)
- $(CC) -shared -o $@ $^ -Wl,-soname=$(notdir $@)
+ $(CC) $(LDFLAGS) -shared -o $@ $^ -Wl,-soname=$(notdir $@)
$(FO_LIBA): $(FO_OBJS)
rm -f $@
@@ -544,7 +544,7 @@
$(FO_LIBSO): $(CU_LIBSO)
$(FO_LIBSO): $(FO_LOBJS)
- $(CC) -shared -o $@ $^ -Wl,-soname=$(notdir $@)
+ $(CC) $(LDFLAGS) -shared -o $@ $^ -Wl,-soname=$(notdir $@)
# Allow terminfo descriptions to be compiled into libterminfo
${TERMINFODIR}/terminfo.cdb: $(TOOL_TIC) ${TERMINFODIR}/terminfo

21
base/om4/configure.patch
View file

@ -1,21 +0,0 @@
--- a/configure
+++ b/configure
@@ -10,16 +10,8 @@
EOF
$CC -o conftest conftest.c > /dev/null 2>&1
if [ $? -eq 0 ] ; then
+ cc="$CC"
+ return 0
- ./conftest
- if [ $? -eq 0 ] ; then
- rm -f conftest conftest.c
- cc="$CC"
- return 0
- else
- echo "could not build working executables"
- echo "Please ensure your C compiler is a native compiler"
- exit 1
- fi
else
rm -f conftest conftest.c
fi

327
base/om4/m4-hand-written-lexer.patch
View file

@ -1,327 +0,0 @@
From edf250c633bef40e7e37dafc9fc393dd2ad9074f Mon Sep 17 00:00:00 2001
From: Michael Forney <mforney@mforney.org>
Date: Tue, 10 Apr 2018 13:37:14 -0700
Subject: [PATCH] m4: Use hand-written lexer to avoid cycle in bootstrap
---
tokenizer.c | 191 +++++++++++++++++++++++++++++++++++++++++
tokenizer.l | 109 -----------------------
2 files changed, 191 insertions(+), 109 deletions(-)
create mode 100644 tokenizer.c
delete mode 100644 tokenizer.l
diff --git a/tokenizer.c b/tokenizer.c
new file mode 100644
index 00000000000..fa19fc65035
--- /dev/null
+++ b/tokenizer.c
@@ -0,0 +1,191 @@
+/* $OpenBSD: tokenizer.l,v 1.10 2017/06/17 01:55:16 bcallah Exp $ */
+/*
+ * Copyright (c) 2004 Marc Espie <espie@cvs.openbsd.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include "parser.h"
+#include <assert.h>
+#include <ctype.h>
+#include <errno.h>
+#include <limits.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+
+extern void m4_warnx(const char *, ...);
+extern int mimic_gnu;
+extern int32_t yylval;
+static const char *yypos;
+
+void
+yy_scan_string(const char *s)
+{
+ yypos = s;
+}
+
+static int32_t
+number(const char *yytext, size_t yylen)
+{
+ long l;
+
+ errno = 0;
+ l = strtol(yytext, NULL, 0);
+ if (((l == LONG_MAX || l == LONG_MIN) && errno == ERANGE) ||
+ l > INT32_MAX || l < INT32_MIN)
+ m4_warnx("numeric overflow in expr: %.*s", (int)yylen, yytext);
+ return l;
+}
+
+static int32_t
+parse_radix(const char *yytext, size_t yylen)
+{
+ long base;
+ char *next;
+ long l;
+ int d;
+
+ l = 0;
+ base = strtol(yytext+2, &next, 0);
+ if (base > 36 || next == NULL) {
+ m4_warnx("error in number %.*s", (int)yylen, yytext);
+ } else {
+ next++;
+ while (*next != 0) {
+ if (*next >= '0' && *next <= '9')
+ d = *next - '0';
+ else if (*next >= 'a' && *next <= 'z')
+ d = *next - 'a' + 10;
+ else {
+ assert(*next >= 'A' && *next <= 'Z');
+ d = *next - 'A' + 10;
+ }
+ if (d >= base) {
+ m4_warnx("error in number %.*s", (int)yylen, yytext);
+ return 0;
+ }
+ l = base * l + d;
+ next++;
+ }
+ }
+ return l;
+}
+
+static int
+isodigit(int c)
+{
+ return c >= '0' && c <= '7';
+}
+
+int yylex(void)
+{
+ const char *start;
+
+next:
+ start = yypos;
+ switch (*yypos) {
+ case ' ':
+ case '\t':
+ case '\n':
+ ++yypos;
+ goto next;
+ case '<':
+ switch (yypos[1]) {
+ case '=':
+ yypos += 2;
+ return LE;
+ case '<':
+ yypos += 2;
+ return LSHIFT;
+ }
+ break;
+ case '>':
+ switch (yypos[1]) {
+ case '=':
+ yypos += 2;
+ return GE;
+ case '>':
+ yypos += 2;
+ return RSHIFT;
+ }
+ break;
+ case '=':
+ if (yypos[1] != '=')
+ break;
+ yypos += 2;
+ return EQ;
+ case '!':
+ if (yypos[1] != '=')
+ break;
+ yypos += 2;
+ return NE;
+ case '&':
+ if (yypos[1] != '&')
+ break;
+ yypos += 2;
+ return LAND;
+ case '|':
+ if (yypos[1] != '|')
+ break;
+ yypos += 2;
+ return LOR;
+ case '*':
+ if (!mimic_gnu || yypos[1] != '*')
+ break;
+ yypos += 2;
+ return EXPONENT;
+ case '0':
+ switch (*++yypos) {
+ case 'x':
+ case 'X':
+ if (!isxdigit(*++yypos))
+ return ERROR;
+ do ++yypos;
+ while (isxdigit(*yypos));
+ break;
+ case 'r':
+ case 'R':
+ if (!mimic_gnu)
+ break;
+ if (!isdigit(*++yypos))
+ return ERROR;
+ do ++yypos;
+ while (isdigit(*yypos));
+ if (*yypos != ':')
+ return ERROR;
+ if (!isalnum(*++yypos))
+ return ERROR;
+ do ++yypos;
+ while (isalnum(*yypos));
+ yylval = parse_radix(start, yypos - start);
+ return NUMBER;
+ default:
+ do ++yypos;
+ while (isodigit(*yypos));
+ break;
+ }
+ yylval = number(start, yypos - start);
+ return NUMBER;
+ case '\0':
+ return '\0';
+ }
+ if (isdigit(*yypos)) {
+ do ++yypos;
+ while (isdigit(*yypos));
+ yylval = number(start, yypos - start);
+ return NUMBER;
+ }
+
+ return *yypos++;
+}
diff --git a/tokenizer.l b/tokenizer.l
deleted file mode 100644
index 94f02fb6085..00000000000
--- a/tokenizer.l
+++ /dev/null
@@ -1,109 +0,0 @@
-%{
-/* $OpenBSD: tokenizer.l,v 1.10 2017/06/17 01:55:16 bcallah Exp $ */
-/*
- * Copyright (c) 2004 Marc Espie <espie@cvs.openbsd.org>
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-#include "parser.h"
-#include <assert.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <stdint.h>
-#include <limits.h>
-
-extern void m4_warnx(const char *, ...);
-extern int mimic_gnu;
-extern int32_t yylval;
-
-int32_t number(void);
-int32_t parse_radix(void);
-%}
-
-delim [ \t\n]
-ws {delim}+
-hex 0[xX][0-9a-fA-F]+
-oct 0[0-7]*
-dec [1-9][0-9]*
-radix 0[rR][0-9]+:[0-9a-zA-Z]+
-
-%option noyywrap
-
-%%
-{ws} {/* just skip it */}
-{hex}|{oct}|{dec} { yylval = number(); return(NUMBER); }
-{radix} { if (mimic_gnu) {
- yylval = parse_radix(); return(NUMBER);
- } else {
- return(ERROR);
- }
- }
-"<=" { return(LE); }
-">=" { return(GE); }
-"<<" { return(LSHIFT); }
-">>" { return(RSHIFT); }
-"==" { return(EQ); }
-"!=" { return(NE); }
-"&&" { return(LAND); }
-"||" { return(LOR); }
-"**" { if (mimic_gnu) { return (EXPONENT); } }
-. { return yytext[0]; }
-%%
-
-int32_t
-number()
-{
- long l;
-
- errno = 0;
- l = strtol(yytext, NULL, 0);
- if (((l == LONG_MAX || l == LONG_MIN) && errno == ERANGE) ||
- l > INT32_MAX || l < INT32_MIN)
- m4_warnx("numeric overflow in expr: %s", yytext);
- return l;
-}
-
-int32_t
-parse_radix()
-{
- long base;
- char *next;
- long l;
- int d;
-
- l = 0;
- base = strtol(yytext+2, &next, 0);
- if (base > 36 || next == NULL) {
- m4_warnx("error in number %s", yytext);
- } else {
- next++;
- while (*next != 0) {
- if (*next >= '0' && *next <= '9')
- d = *next - '0';
- else if (*next >= 'a' && *next <= 'z')
- d = *next - 'a' + 10;
- else {
- assert(*next >= 'A' && *next <= 'Z');
- d = *next - 'A' + 10;
- }
- if (d >= base) {
- m4_warnx("error in number %s", yytext);
- return 0;
- }
- l = base * l + d;
- next++;
- }
- }
- return l;
-}
-
--
2.17.0

32
base/openssh/build.sh
View file

@ -1,32 +0,0 @@
pkgname=openssh
pkgver=8.8p1
fetch() {
curl "https://cdn.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--build=$TRIPLE \
--host=$TRIPLE \
--libexecdir=/usr/lib
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
}
backup() {
return
}
license() {
cd $pkgname-$pkgver
cat LICENCE
}

55
base/openssl/build.sh
View file

@ -1,55 +0,0 @@
pkgname=openssl
pkgver=3.0.0
ext="dev"
auto_cross
fetch() {
curl "https://www.openssl.org/source/openssl-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
PREFIX=/usr
[ -z "$FOR_CROSS" ] || PREFIX=$FOR_CROSS_DIR
build() {
cd $pkgname-$pkgver
./Configure \
--prefix=/$PREFIX \
--openssldir=/etc/ssl \
--libdir=lib \
linux-generic64 \
shared no-zlib no-async \
no-comp no-idea no-mdc2 \
no-rc5 no-ec2m no-sm2 \
no-sm4 -no-ssl2 no-ssl3 \
no-seed no-weak-ssl-ciphers \
-Wa,--noexecstack
make
}
package() {
cd $pkgname-$pkgver
make install_sw DESTDIR=$pkgdir
if [ -z "$FOR_CROSS" ]; then
install -d $pkgdir/usr/sbin
install -Dm755 ../../update-ca.sh $pkgdir/usr/sbin/update-ca
else
rm -rf $pkgdir/$PREFIX/bin
fi
}
backup() {
return
}
license() {
cd $pkgname-$pkgver
echo 'Copyright 20xx-20yy The OpenSSL Project Authors. All Rights Reserved.'
echo
echo 'Licensed under the Apache License 2.0 (the "License"). You may not use'
echo 'this file except in compliance with the License. You can obtain a copy'
echo 'in the file LICENSE in the source distribution or at'
echo 'https://www.openssl.org/source/license.html'
}

2
base/openssl/update-ca.sh
View file

@ -1,2 +0,0 @@
#!/bin/sh
curl -L https://curl.haxx.se/ca/cacert.pem -o /etc/ssl/cert.pem

39
base/oslo/build.sh
View file

@ -1,39 +0,0 @@
pkgname=oslo
pkgver=main
fetch() {
curl -L "https://github.com/iglunix/oslo/archive/refs/heads/main.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
}
build() {
cd $pkgname-$pkgver
make ARCH=$ARCH
}
case $ARCH in
aarch64)
_a=aa64
;;
x86_64)
_a=x64
;;
*)
exit 1
;;
esac
package() {
cd $pkgname-$pkgver
install -Dm755 oslo.efi $pkgdir/boot/efi/boot/boot$_a.efi
install -Dm644 efi/oslo/entries.ini $pkgdir/boot/efi/oslo/entries.ini
}
license() {
cd $pkgname-$pkgver
cat license.txt
}
backup() {
echo boot/efi/oslo/entries.ini
}

57
base/perl/build.sh
View file

@ -1,57 +0,0 @@
pkgname=perl
pkgver=5.34.0
fetch() {
curl "https://www.cpan.org/src/5.0/perl-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
./Configure -des \
-Dccflags="$CFLAGS" \
-Dcccdlflags='-fPIC' \
-Dcccdlflags='-fPIC' \
-Dccdlflags='-rdynamic' \
-Dprefix=/usr \
-Dprivlib=/usr/share/perl5/core_perl \
-Darchlib=/usr/lib/perl5/core_perl \
-Dvendorprefix=/usr \
-Dvendorlib=/usr/share/perl5/vendor_perl \
-Dvendorarch=/usr/lib/perl5/vendor_perl \
-Dsiteprefix=/usr/local \
-Dsitelib=/usr/local/share/perl5/site_perl \
-Dsitearch=/usr/local/lib/perl5/site_perl \
-Dlocincpth=' ' \
-Duselargefiles \
-Dusethreads \
-Duseshrplib \
-Dd_semctl_semun \
-Dman1dir=/usr/share/man/man1 \
-Dman3dir=/usr/share/man/man3 \
-Dinstallman1dir=/usr/share/man/man1 \
-Dinstallman3dir=/usr/share/man/man3 \
-Dman1ext='1' \
-Dman3ext='3pm' \
-Dcf_by='Iglunix' \
-Ud_csh \
-Dusenm
make libperl.so && make || return 1
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
rm -rf $pkgdir/usr/share/man
}
backup() {
return
}
license() {
cd $pkgname-$pkgver
cat Copying
}

30
base/python-mako/build.sh
View file

@ -1,30 +0,0 @@
pkgver=1.1.4
pkgname=python-mako
deps=python
bad=""
ext="doc"
fetch() {
curl -L "https://pypi.io/packages/source/M/Mako/Mako-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
mv Mako-$pkgver $pkgname-$pkgver
}
build() {
cd $pkgname-$pkgver
python setup.py build
}
package() {
cd $pkgname-$pkgver
python setup.py install --prefix=/usr --root=$pkgdir
}
package_doc() {
echo $pkgdir
}
license() {
cd $pkgname-$pkgver
cat LICENSE
}

55
base/python/build.sh
View file

@ -1,55 +0,0 @@
pkgname=python
pkgver=3.10.4
bad=""
ext="doc"
auto_cross
fetch() {
curl "https://www.python.org/ftp/python/$pkgver/Python-$pkgver.tar.xz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mv Python-$pkgver $pkgname-$pkgver
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--build=$HOST_TRIPLE \
--host=$TRIPLE \
--with-system-ffi=true \
--with-ssl-default-suites=openssl \
--without-ensure-pip \
ax_cv_c_float_words_bigendian=no \
ac_cv_buggy_getaddrinfo=no \
ac_cv_file__dev_ptmx=yes \
ac_cv_file__dev_ptc=no
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
rm -r $pkgdir/usr/lib/python3.10/test
rm -r $pkgdir/usr/lib/python3.10/ctypes/test
rm -r $pkgdir/usr/lib/python3.10/distutils/tests
rm -r $pkgdir/usr/lib/python3.10/idlelib/idle_test
rm -r $pkgidr/usr/lib/python3.10/lib2to3/tests
rm -r $pkgidr/usr/lib/python3.10/sqlite3/test
rm -r $pkgdir/usr/lib/python3.10/tkinter/test
rm -r $pkgdir/usr/lib/python3.10/unittest/test
rm -r $pkgdir/usr/share
ln -sr $pkgdir/usr/bin/python3 $pkgdir/usr/bin/python
}
package_doc() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
rm -r $pkgdir/lib
rm -r $pkgdir/bin
rm -r $pkgdir/include
}
license() {
cd $pkgname-$pkgver
cat LICENSE
}

51
base/toybox/build.sh
View file

@ -1,51 +0,0 @@
pkgver=0.8.7
pkgname=toybox
pkgrel=1
deps="musl"
fetch() {
curl -O "https://landley.net/toybox/downloads/toybox-$pkgver.tar.gz"
tar -xf $pkgname-$pkgver.tar.gz
curl "https://pci-ids.ucw.cz/v2.2/pci.ids" -o pci.ids
cd $pkgname-$pkgver
patch -p1 < ../../ls-colour.patch
patch -p1 < ../../mksh.patch
patch -p1 < ../../xxd-i.patch
}
build() {
cd $pkgname-$pkgver
CPUS=1 bad --gmake gmake defconfig
sed 's|# CONFIG_SH is not set|CONFIG_SH=y|' .config > /tmp/_
mv /tmp/_ .config
CPUS=1 bad --gmake gmake
}
backup() {
return
}
package() {
install -d $pkgdir/usr/share/misc
install -Dm 644 pci.ids $pkgdir/usr/share/misc
cd $pkgname-$pkgver
bad --gmake gmake PREFIX=$pkgdir install
# Provided by NetBSD Curses
rm $pkgdir/usr/bin/clear
rm $pkgdir/usr/bin/reset
# LLVM Provides this
rm $pkgdir/usr/bin/readelf
# rm $pkgdir/usr/bin/tar
# MKSH provides this
rm $pkgdir/bin/sh
rm $pkgdir/bin/bash
}
license() {
cd $pkgname-$pkgver
cat LICENSE
}

15
base/toybox/ls-colour.patch
View file

@ -1,15 +0,0 @@
--- a/toys/posix/ls.c
+++ b/toys/posix/ls.c
@@ -513,9 +513,11 @@
if (!FLAG(show_control_chars)) toys.optflags |= FLAG_b;
if (FLAG(l)||FLAG(o)||FLAG(n)||FLAG(g)) toys.optflags |= FLAG_1;
else if (!(FLAG(1)||FLAG(x)||FLAG(m))) toys.optflags |= FLAG_C;
+ if (TT.color && !strcmp(TT.color, "never")) toys.optflags ^= FLAG_color;
+ else toys.optflags |= FLAG_color;
} else {
if (!FLAG(m)) toys.optflags |= FLAG_1;
- if (TT.color) toys.optflags ^= FLAG_color;
+ if (TT.color && strcmp(TT.color, "always")) toys.optflags ^= FLAG_color;
}
TT.screen_width = 80;

55
base/toybox/lspci-fix-ids.patch
View file

@ -1,55 +0,0 @@
--- a/toys/other/lspci.c
+++ b/toys/other/lspci.c
@@ -78,18 +78,45 @@
fseek(TT.db, 0, SEEK_SET);
while (!vbig || !dbig) {
+ int tc = 0; // tab count
s = p;
if (!fgets(s, sizeof(toybuf)-(p-toybuf)-1, TT.db)) break;
- while (isspace(*s)) s++;
+ while (*s == ' ') s++;
if (*s == '#') continue;
- if (vbig && s == p) break;
- if (strstart(&s, vbig ? device : vendor)) {
- if (vbig) dbig = s+2;
- else vbig = s+2;
- s += strlen(s);
- s[-1] = 0; // trim ending newline
- p = s + 1;
+ while (*s == '\t') { s++; tc++; }
+ switch (tc) {
+ case 0:
+ if (strstart(&s, vendor)) {
+ vbig = s + 2;
+ s += strlen(s);
+ s[-1] = 0;
+ p = s + 1;
+ }
+ break;
+ case 1:
+ if (vbig && strstart(&s, device)) {
+ dbig = s + 2;
+ s += strlen(s);
+ s[-1] = 0;
+ p = s + 1;
+ }
+ break;
+ case 2:
+ if (strstart(&s, vendor)) {
+ s+=5;
+ if (strstart(&s, device))
+ printf("subven: %s\n", s);
+ }
+ break;
}
+
+ // if (strstart(&s, vbig ? device : vendor)) {
+ // if (vbig) dbig = s+2;
+ // else vbig = s+2;
+ // s += strlen(s);
+ // s[-1] = 0; // trim ending newline
+ // p = s + 1;
+ // }
}
}

35
base/toybox/mksh.patch
View file

@ -1,35 +0,0 @@
--- a/scripts/genconfig.sh
+++ b/scripts/genconfig.sh
@@ -16,7 +16,7 @@
# Symbol name is first argument, flags second, feed C file to stdin
probesymbol()
{
- probecc "${@:2}" 2>/dev/null && DEFAULT=y || DEFAULT=n
+ probecc "$2" 2>/dev/null && DEFAULT=y || DEFAULT=n
rm a.out 2>/dev/null
echo -e "config $1\n\tbool\n\tdefault $DEFAULT\n" || exit 1
}
--- a/scripts/portability.sh
+++ b/scripts/portability.sh
@@ -35,7 +35,7 @@
fi
# Centos 7 bug workaround, EOL June 30 2024. TODO
-DASHN=-n; wait -n 2>/dev/null; [ $? -eq 2 ] && unset DASHN
+# DASHN=-n; wait -n 2>/dev/null; [ $? -eq 2 ] && unset DASHN
# If the build is using gnu tools, make them behave less randomly.
export LANG=c
--- a/scripts/make.sh
+++ b/scripts/make.sh
@@ -76,8 +76,8 @@
echo -e "\$BUILD lib/*.c $TOYFILES \$LINK -o $OUTNAME"
}
-if ! cmp -s <(genbuildsh 2>/dev/null | head -n 5) \
- <(head -n 5 "$GENDIR"/build.sh 2>/dev/null | $SED '5s/ -o .*//')
+if [ "$(genbuildsh 2>/dev/null | head -n 5)" != \
+ "$(head -n 5 "$GENDIR"/build.sh 2>/dev/null | $SED '5s/ -o .*//')" ]
then
echo -n "Library probe"

46
base/toybox/xxd-i.patch
View file

@ -1,46 +0,0 @@
--- a/toys/other/xxd.c
+++ b/toys/other/xxd.c
@@ -77,11 +77,13 @@ static void do_xxd(int fd, char *name)
static void do_xxd_include(int fd, char *name)
{
+ long long total = 0;
int c = 1, i, len;
// The original xxd outputs a header/footer if given a filename (not stdin).
// We don't, which means that unlike the original we can implement -ri.
while ((len = read(fd, toybuf, sizeof(toybuf))) > 0) {
+ total += len;
for (i = 0; i < len; ++i) {
printf("%s%#.02x", c > 1 ? ", " : " ", toybuf[i]);
if (c++ == TT.c) {
--- a/toys/other/xxd.c
+++ b/toys/other/xxd.c
@@ -80,7 +80,12 @@
int c = 1, i, len;
// The original xxd outputs a header/footer if given a filename (not stdin).
- // We don't, which means that unlike the original we can implement -ri.
+ // We don't, which means that unlike the original we can implement -ri
+ printf("unsigned char %s", isdigit(name[0]) ? "__": "");
+ for (char *n = name; *n; n++)
+ putchar(*n == '.' ? '_' : *n);
+ puts("[] = {");
+
while ((len = read(fd, toybuf, sizeof(toybuf))) > 0) {
total += len;
for (i = 0; i < len; ++i) {
@@ -91,6 +96,13 @@
}
}
}
+ puts("};");
+ printf("unsigned int %s", isdigit(name[0]) ? "__": "");
+ for (char *n = name; *n; n++)
+ putchar(*n == '.' ? '_' : *n);
+
+ printf("_len = %lld;\n", total);
+
if (len < 0) perror_msg_raw(name);
if (c > 1) xputc('\n');
}

34
base/wpa_supplicant/build.sh
View file

@ -1,34 +0,0 @@
pkgname=wpa_supplicant
pkgver=2.9
fetch() {
curl "https://w1.fi/releases/wpa_supplicant-2.9.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
cp ../config .
}
build() {
#############################################################################
# This software is unlikely to be secure in the way that we are building it #
# #
# USE AT YOUR OWN RISK! #
# #
#############################################################################
cd $pkgname-$pkgver
cd $pkgname
cp ../../config .config
CFLAGS='-D_GNU_SOURCE -DCONFIG_LIBNL20 -DCONFIG_LIBNL20 -DLIBNL1_COMPAT -I/usr/include/libnl-tiny' gmake CONFIG_LIBNL_TINY=y
}
package() {
cd $pkgname-$pkgver
cd $pkgname
bad --gmake gmake install DESTDIR=$pkgdir BINDIR=/usr/sbin
}
license() {
cd $pkgname-$pkgver
cat COPYING
}

620
base/wpa_supplicant/config
View file

@ -1,620 +0,0 @@
# Example wpa_supplicant build time configuration
#
# This file lists the configuration options that are used when building the
# wpa_supplicant binary. All lines starting with # are ignored. Configuration
# option lines must be commented out complete, if they are not to be included,
# i.e., just setting VARIABLE=n is not disabling that variable.
#
# This file is included in Makefile, so variables like CFLAGS and LIBS can also
# be modified from here. In most cases, these lines should use += in order not
# to override previous values of the variables.
# Uncomment following two lines and fix the paths if you have installed OpenSSL
# or GnuTLS in non-default location
#CFLAGS += -I/usr/local/openssl/include
#LIBS += -L/usr/local/openssl/lib
# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
# the kerberos files are not in the default include path. Following line can be
# used to fix build issues on such systems (krb5.h not found).
#CFLAGS += -I/usr/include/kerberos
# Driver interface for generic Linux wireless extensions
# Note: WEXT is deprecated in the current Linux kernel version and no new
# functionality is added to it. nl80211-based interface is the new
# replacement for WEXT and its use allows wpa_supplicant to properly control
# the driver to improve existing functionality like roaming and to support new
# functionality.
CONFIG_DRIVER_WEXT=y
# Driver interface for Linux drivers using the nl80211 kernel interface
CONFIG_DRIVER_NL80211=y
# QCA vendor extensions to nl80211
#CONFIG_DRIVER_NL80211_QCA=y
# driver_nl80211.c requires libnl. If you are compiling it yourself
# you may need to point hostapd to your version of libnl.
#
#CFLAGS += -I$<path to libnl include files>
#LIBS += -L$<path to libnl library files>
# Use libnl v2.0 (or 3.0) libraries.
#CONFIG_LIBNL20=y
# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
#CONFIG_LIBNL32=y
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
#LIBS_p += -L/usr/local/lib
#LIBS_c += -L/usr/local/lib
# Driver interface for Windows NDIS
#CONFIG_DRIVER_NDIS=y
#CFLAGS += -I/usr/include/w32api/ddk
#LIBS += -L/usr/local/lib
# For native build using mingw
#CONFIG_NATIVE_WINDOWS=y
# Additional directories for cross-compilation on Linux host for mingw target
#CFLAGS += -I/opt/mingw/mingw32/include/ddk
#LIBS += -L/opt/mingw/mingw32/lib
#CC=mingw32-gcc
# By default, driver_ndis uses WinPcap for low-level operations. This can be
# replaced with the following option which replaces WinPcap calls with NDISUIO.
# However, this requires that WZC is disabled (net stop wzcsvc) before starting
# wpa_supplicant.
# CONFIG_USE_NDISUIO=y
# Driver interface for wired Ethernet drivers
CONFIG_DRIVER_WIRED=y
# Driver interface for MACsec capable Qualcomm Atheros drivers
#CONFIG_DRIVER_MACSEC_QCA=y
# Driver interface for Linux MACsec drivers
#CONFIG_DRIVER_MACSEC_LINUX=y
# Driver interface for the Broadcom RoboSwitch family
#CONFIG_DRIVER_ROBOSWITCH=y
# Driver interface for no driver (e.g., WPS ER only)
#CONFIG_DRIVER_NONE=y
# Solaris libraries
#LIBS += -lsocket -ldlpi -lnsl
#LIBS_c += -lsocket
# Enable IEEE 802.1X Supplicant (automatically included if any EAP method or
# MACsec is included)
CONFIG_IEEE8021X_EAPOL=y
# EAP-MD5
CONFIG_EAP_MD5=y
# EAP-MSCHAPv2
CONFIG_EAP_MSCHAPV2=y
# EAP-TLS
CONFIG_EAP_TLS=y
# EAL-PEAP
CONFIG_EAP_PEAP=y
# EAP-TTLS
CONFIG_EAP_TTLS=y
# EAP-FAST
CONFIG_EAP_FAST=y
# EAP-TEAP
# Note: The current EAP-TEAP implementation is experimental and should not be
# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
# of conflicting statements and missing details and the implementation has
# vendor specific workarounds for those and as such, may not interoperate with
# any other implementation. This should not be used for anything else than
# experimentation and interoperability testing until those issues has been
# resolved.
#CONFIG_EAP_TEAP=y
# EAP-GTC
CONFIG_EAP_GTC=y
# EAP-OTP
CONFIG_EAP_OTP=y
# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
#CONFIG_EAP_SIM=y
# Enable SIM simulator (Milenage) for EAP-SIM
#CONFIG_SIM_SIMULATOR=y
# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
#CONFIG_EAP_PSK=y
# EAP-pwd (secure authentication using only a password)
#CONFIG_EAP_PWD=y
# EAP-PAX
#CONFIG_EAP_PAX=y
# LEAP
CONFIG_EAP_LEAP=y
# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
#CONFIG_EAP_AKA=y
# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
# This requires CONFIG_EAP_AKA to be enabled, too.
#CONFIG_EAP_AKA_PRIME=y
# Enable USIM simulator (Milenage) for EAP-AKA
#CONFIG_USIM_SIMULATOR=y
# EAP-SAKE
#CONFIG_EAP_SAKE=y
# EAP-GPSK
#CONFIG_EAP_GPSK=y
# Include support for optional SHA256 cipher suite in EAP-GPSK
#CONFIG_EAP_GPSK_SHA256=y
# EAP-TNC and related Trusted Network Connect support (experimental)
#CONFIG_EAP_TNC=y
# Wi-Fi Protected Setup (WPS)
CONFIG_WPS=y
# Enable WPS external registrar functionality
#CONFIG_WPS_ER=y
# Disable credentials for an open network by default when acting as a WPS
# registrar.
#CONFIG_WPS_REG_DISABLE_OPEN=y
# Enable WPS support with NFC config method
#CONFIG_WPS_NFC=y
# EAP-IKEv2
#CONFIG_EAP_IKEV2=y
# EAP-EKE
#CONFIG_EAP_EKE=y
# MACsec
#CONFIG_MACSEC=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
# engine.
CONFIG_SMARTCARD=y
# PC/SC interface for smartcards (USIM, GSM SIM)
# Enable this if EAP-SIM or EAP-AKA is included
#CONFIG_PCSC=y
# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
CONFIG_HT_OVERRIDES=y
# Support VHT overrides (disable VHT, mask MCS rates, etc.)
CONFIG_VHT_OVERRIDES=y
# Development testing
#CONFIG_EAPOL_TEST=y
# Select control interface backend for external programs, e.g, wpa_cli:
# unix = UNIX domain sockets (default for Linux/*BSD)
# udp = UDP sockets using localhost (127.0.0.1)
# udp6 = UDP IPv6 sockets using localhost (::1)
# named_pipe = Windows Named Pipe (default for Windows)
# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose)
# y = use default (backwards compatibility)
# If this option is commented out, control interface is not included in the
# build.
CONFIG_CTRL_IFACE=y
# Include support for GNU Readline and History Libraries in wpa_cli.
# When building a wpa_cli binary for distribution, please note that these
# libraries are licensed under GPL and as such, BSD license may not apply for
# the resulting binary.
#CONFIG_READLINE=y
# Include internal line edit mode in wpa_cli. This can be used as a replacement
# for GNU Readline to provide limited command line editing and history support.
#CONFIG_WPA_CLI_EDIT=y
# Remove debugging code that is printing out debug message to stdout.
# This can be used to reduce the size of the wpa_supplicant considerably
# if debugging code is not needed. The size reduction can be around 35%
# (e.g., 90 kB).
#CONFIG_NO_STDOUT_DEBUG=y
# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
# 35-50 kB in code size.
#CONFIG_NO_WPA=y
# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
# This option can be used to reduce code size by removing support for
# converting ASCII passphrases into PSK. If this functionality is removed, the
# PSK can only be configured as the 64-octet hexstring (e.g., from
# wpa_passphrase). This saves about 0.5 kB in code size.
#CONFIG_NO_WPA_PASSPHRASE=y
# Simultaneous Authentication of Equals (SAE), WPA3-Personal
#CONFIG_SAE=y
# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
# This can be used if ap_scan=1 mode is never enabled.
#CONFIG_NO_SCAN_PROCESSING=y
# Select configuration backend:
# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
# path is given on command line, not here; this option is just used to
# select the backend that allows configuration files to be used)
# winreg = Windows registry (see win_example.reg for an example)
CONFIG_BACKEND=file
# Remove configuration write functionality (i.e., to allow the configuration
# file to be updated based on runtime configuration changes). The runtime
# configuration can still be changed, the changes are just not going to be
# persistent over restarts. This option can be used to reduce code size by
# about 3.5 kB.
#CONFIG_NO_CONFIG_WRITE=y
# Remove support for configuration blobs to reduce code size by about 1.5 kB.
#CONFIG_NO_CONFIG_BLOBS=y
# Select program entry point implementation:
# main = UNIX/POSIX like main() function (default)
# main_winsvc = Windows service (read parameters from registry)
# main_none = Very basic example (development use only)
#CONFIG_MAIN=main
# Select wrapper for operating system and C library specific functions
# unix = UNIX/POSIX like systems (default)
# win32 = Windows systems
# none = Empty template
#CONFIG_OS=unix
# Select event loop implementation
# eloop = select() loop (default)
# eloop_win = Windows events and WaitForMultipleObject() loop
#CONFIG_ELOOP=eloop
# Should we use poll instead of select? Select is used by default.
#CONFIG_ELOOP_POLL=y
# Should we use epoll instead of select? Select is used by default.
#CONFIG_ELOOP_EPOLL=y
# Should we use kqueue instead of select? Select is used by default.
#CONFIG_ELOOP_KQUEUE=y
# Select layer 2 packet implementation
# linux = Linux packet socket (default)
# pcap = libpcap/libdnet/WinPcap
# freebsd = FreeBSD libpcap
# winpcap = WinPcap with receive thread
# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
# none = Empty template
#CONFIG_L2_PACKET=linux
# Disable Linux packet socket workaround applicable for station interface
# in a bridge for EAPOL frames. This should be uncommented only if the kernel
# is known to not have the regression issue in packet socket behavior with
# bridge interfaces (commit 'bridge: respect RFC2863 operational state')').
CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y
# IEEE 802.11w (management frame protection), also known as PMF
# Driver support is also needed for IEEE 802.11w.
#CONFIG_IEEE80211W=y
# Support Operating Channel Validation
#CONFIG_OCV=y
# Select TLS implementation
# openssl = OpenSSL (default)
# gnutls = GnuTLS
# internal = Internal TLSv1 implementation (experimental)
# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
# none = Empty template
CONFIG_TLS=internal
# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
# can be enabled to get a stronger construction of messages when block ciphers
# are used. It should be noted that some existing TLS v1.0 -based
# implementation may not be compatible with TLS v1.1 message (ClientHello is
# sent prior to negotiating which version will be used)
#CONFIG_TLSV11=y
# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
# can be enabled to enable use of stronger crypto algorithms. It should be
# noted that some existing TLS v1.0 -based implementation may not be compatible
# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
# will be used)
#CONFIG_TLSV12=y
# Select which ciphers to use by default with OpenSSL if the user does not
# specify them.
#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
# If CONFIG_TLS=internal is used, additional library and include paths are
# needed for LibTomMath. Alternatively, an integrated, minimal version of
# LibTomMath can be used. See beginning of libtommath.c for details on benefits
# and drawbacks of this option.
CONFIG_INTERNAL_LIBTOMMATH=y
#ifndef CONFIG_INTERNAL_LIBTOMMATH
#LTM_PATH=/usr/src/libtommath-0.39
#CFLAGS += -I$(LTM_PATH)
#LIBS += -L$(LTM_PATH)
#LIBS_p += -L$(LTM_PATH)
#endif
# At the cost of about 4 kB of additional binary size, the internal LibTomMath
# can be configured to include faster routines for exptmod, sqr, and div to
# speed up DH and RSA calculation considerably
CONFIG_INTERNAL_LIBTOMMATH_FAST=y
# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
# This is only for Windows builds and requires WMI-related header files and
# WbemUuid.Lib from Platform SDK even when building with MinGW.
#CONFIG_NDIS_EVENTS_INTEGRATED=y
#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
# Add support for new DBus control interface
# (fi.w1.hostap.wpa_supplicant1)
#CONFIG_CTRL_IFACE_DBUS_NEW=y
# Add introspection support for new DBus control interface
#CONFIG_CTRL_IFACE_DBUS_INTRO=y
# Add support for loading EAP methods dynamically as shared libraries.
# When this option is enabled, each EAP method can be either included
# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
# be loaded in the beginning of the wpa_supplicant configuration file
# (see load_dynamic_eap parameter in the example file) before being used in
# the network blocks.
#
# Note that some shared parts of EAP methods are included in the main program
# and in order to be able to use dynamic EAP methods using these parts, the
# main program must have been build with the EAP method enabled (=y or =dyn).
# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
# unless at least one of them was included in the main build to force inclusion
# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
# in the main build to be able to load these methods dynamically.
#
# Please also note that using dynamic libraries will increase the total binary
# size. Thus, it may not be the best option for targets that have limited
# amount of memory/flash.
#CONFIG_DYNAMIC_EAP_METHODS=y
# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode
CONFIG_IEEE80211R=y
# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
#CONFIG_DEBUG_FILE=y
# Send debug messages to syslog instead of stdout
CONFIG_DEBUG_SYSLOG=y
# Set syslog facility for debug messages
CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
# Add support for sending all debug messages (regardless of debug verbosity)
# to the Linux kernel tracing facility. This helps debug the entire stack by
# making it easy to record everything happening from the driver up into the
# same file, e.g., using trace-cmd.
#CONFIG_DEBUG_LINUX_TRACING=y
# Add support for writing debug log to Android logcat instead of standard
# output
#CONFIG_ANDROID_LOG=y
# Enable privilege separation (see README 'Privilege separation' for details)
#CONFIG_PRIVSEP=y
# Enable mitigation against certain attacks against TKIP by delaying Michael
# MIC error reports by a random amount of time between 0 and 60 seconds
#CONFIG_DELAYED_MIC_ERROR_REPORT=y
# Enable tracing code for developer debugging
# This tracks use of memory allocations and other registrations and reports
# incorrect use with a backtrace of call (or allocation) location.
#CONFIG_WPA_TRACE=y
# For BSD, uncomment these.
#LIBS += -lexecinfo
#LIBS_p += -lexecinfo
#LIBS_c += -lexecinfo
# Use libbfd to get more details for developer debugging
# This enables use of libbfd to get more detailed symbols for the backtraces
# generated by CONFIG_WPA_TRACE=y.
#CONFIG_WPA_TRACE_BFD=y
# For BSD, uncomment these.
#LIBS += -lbfd -liberty -lz
#LIBS_p += -lbfd -liberty -lz
#LIBS_c += -lbfd -liberty -lz
# wpa_supplicant depends on strong random number generation being available
# from the operating system. os_get_random() function is used to fetch random
# data when needed, e.g., for key generation. On Linux and BSD systems, this
# works by reading /dev/urandom. It should be noted that the OS entropy pool
# needs to be properly initialized before wpa_supplicant is started. This is
# important especially on embedded devices that do not have a hardware random
# number generator and may by default start up with minimal entropy available
# for random number generation.
#
# As a safety net, wpa_supplicant is by default trying to internally collect
# additional entropy for generating random data to mix in with the data fetched
# from the OS. This by itself is not considered to be very strong, but it may
# help in cases where the system pool is not initialized properly. However, it
# is very strongly recommended that the system pool is initialized with enough
# entropy either by using hardware assisted random number generator or by
# storing state over device reboots.
#
# wpa_supplicant can be configured to maintain its own entropy store over
# restarts to enhance random number generation. This is not perfect, but it is
# much more secure than using the same sequence of random numbers after every
# reboot. This can be enabled with -e<entropy file> command line option. The
# specified file needs to be readable and writable by wpa_supplicant.
#
# If the os_get_random() is known to provide strong random data (e.g., on
# Linux/BSD, the board in question is known to have reliable source of random
# data from /dev/urandom), the internal wpa_supplicant random pool can be
# disabled. This will save some in binary size and CPU use. However, this
# should only be considered for builds that are known to be used on devices
# that meet the requirements described above.
CONFIG_NO_RANDOM_POOL=y
# Should we attempt to use the getrandom(2) call that provides more reliable
# yet secure randomness source than /dev/random on Linux 3.17 and newer.
# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
CONFIG_GETRANDOM=y
# IEEE 802.11n (High Throughput) support (mainly for AP mode)
#CONFIG_IEEE80211N=y
# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
# (depends on CONFIG_IEEE80211N)
#CONFIG_IEEE80211AC=y
# Wireless Network Management (IEEE Std 802.11v-2011)
# Note: This is experimental and not complete implementation.
CONFIG_WNM=y
# Interworking (IEEE 802.11u)
# This can be used to enable functionality to improve interworking with
# external networks (GAS/ANQP to learn more about the networks and network
# selection based on available credentials).
#CONFIG_INTERWORKING=y
# Hotspot 2.0
#CONFIG_HS20=y
# Enable interface matching in wpa_supplicant
#CONFIG_MATCH_IFACE=y
# Disable roaming in wpa_supplicant
#CONFIG_NO_ROAMING=y
# AP mode operations with wpa_supplicant
# This can be used for controlling AP mode operations with wpa_supplicant. It
# should be noted that this is mainly aimed at simple cases like
# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
# external RADIUS server can be supported with hostapd.
#CONFIG_AP=y
# P2P (Wi-Fi Direct)
# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
# more information on P2P operations.
#CONFIG_P2P=y
# Enable TDLS support
#CONFIG_TDLS=y
# Wi-Fi Display
# This can be used to enable Wi-Fi Display extensions for P2P using an external
# program to control the additional information exchanges in the messages.
#CONFIG_WIFI_DISPLAY=y
# Autoscan
# This can be used to enable automatic scan support in wpa_supplicant.
# See wpa_supplicant.conf for more information on autoscan usage.
#
# Enabling directly a module will enable autoscan support.
# For exponential module:
#CONFIG_AUTOSCAN_EXPONENTIAL=y
# For periodic module:
#CONFIG_AUTOSCAN_PERIODIC=y
# Password (and passphrase, etc.) backend for external storage
# These optional mechanisms can be used to add support for storing passwords
# and other secrets in external (to wpa_supplicant) location. This allows, for
# example, operating system specific key storage to be used
#
# External password backend for testing purposes (developer use)
#CONFIG_EXT_PASSWORD_TEST=y
# Enable Fast Session Transfer (FST)
#CONFIG_FST=y
# Enable CLI commands for FST testing
#CONFIG_FST_TEST=y
# OS X builds. This is only for building eapol_test.
#CONFIG_OSX=y
# Automatic Channel Selection
# This will allow wpa_supplicant to pick the channel automatically when channel
# is set to "0".
#
# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative
# to "channel=0". This would enable us to eventually add other ACS algorithms in
# similar way.
#
# Automatic selection is currently only done through initialization, later on
# we hope to do background checks to keep us moving to more ideal channels as
# time goes by. ACS is currently only supported through the nl80211 driver and
# your driver must have survey dump capability that is filled by the driver
# during scanning.
#
# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with
# a newly to create wpa_supplicant.conf variable acs_num_scans.
#
# Supported ACS drivers:
# * ath9k
# * ath5k
# * ath10k
#
# For more details refer to:
# http://wireless.kernel.org/en/users/Documentation/acs
#CONFIG_ACS=y
# Support Multi Band Operation
#CONFIG_MBO=y
# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
#CONFIG_FILS=y
# FILS shared key authentication with PFS
#CONFIG_FILS_SK_PFS=y
# Support RSN on IBSS networks
# This is needed to be able to use mode=1 network profile with proto=RSN and
# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None).
CONFIG_IBSS_RSN=y
# External PMKSA cache control
# This can be used to enable control interface commands that allow the current
# PMKSA cache entries to be fetched and new entries to be added.
#CONFIG_PMKSA_CACHE_EXTERNAL=y
# Mesh Networking (IEEE 802.11s)
#CONFIG_MESH=y
# Background scanning modules
# These can be used to request wpa_supplicant to perform background scanning
# operations for roaming within an ESS (same SSID). See the bgscan parameter in
# the wpa_supplicant.conf file for more details.
# Periodic background scans based on signal strength
#CONFIG_BGSCAN_SIMPLE=y
# Learn channels used by the network and try to avoid bgscans on other
# channels (experimental)
#CONFIG_BGSCAN_LEARN=y
# Opportunistic Wireless Encryption (OWE)
# Experimental implementation of draft-harkins-owe-07.txt
#CONFIG_OWE=y
# Device Provisioning Protocol (DPP)
# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
# wpa_supplicant/README-DPP for details)
#CONFIG_DPP=y
# uBus IPC/RPC System
# Services can connect to the bus and provide methods
# that can be called by other services or clients.
CONFIG_UBUS=y

44
base/zlib-ng/build.sh
View file

@ -1,44 +0,0 @@
pkgname=zlib-ng
pkgver=2.0.5
fetch() {
curl -L "https://github.com/zlib-ng/zlib-ng/archive/refs/tags/$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mkdir $pkgname-$pkgver/build
}
build() {
cd $pkgname-$pkgver
cd build
PREFIX=/usr
[ -z "$WITH_CROSS" ] || cmake_extra_flags="-DCMAKE_CROSSCOMPILING=ON \
-DCMAKE_SYSROOT=$WITH_CROSS_DIR \
-DCMAKE_C_COMPILER_TARGET=$ARCH-linux-musl"
[ -z "$FOR_CROSS" ] || PREFIX=$FOR_CROSS_DIR
cmake -G Ninja ../ \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=$PREFIX \
-DCMAKE_INSTALL_LIBDIR=lib \
-DZLIB_COMPAT=ON \
$cmake_extra_flags
samu
}
package() {
cd $pkgname-$pkgver
cd build
DESTDIR=$pkgdir samu install
}
license() {
cd $pkgname-$pkgver
cat LICENSE.md
}
backup() {
return
}

29
base/zstd/build.sh
View file

@ -1,29 +0,0 @@
pkgname=zstd
pkgver=1.5.2
auto_cross
fetch() {
curl -L "https://github.com/facebook/zstd/releases/download/v$pkgver/zstd-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
bad --gmake gmake
}
package() {
cd $pkgname-$pkgver
bad --gmake gmake install PREFIX=/usr DESTDIR=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}
backup() {
return
}

3
bootstrap/README.md
View file

@ -1,3 +0,0 @@
# Bootstrap
These packages are not meant to be used in a complete Iglunix system but are
ment as a stepping stone to build the full packages.

33
bootstrap/rust/build.sh
View file

@ -1,33 +0,0 @@
pkgname=rust
pkgver=beta
fetch() {
curl "https://static.rust-lang.org/dist/rust-$pkgver-$ARCH-unknown-linux-musl.tar.gz" -o rust.tar.gz
tar -xf rust.tar.gz
}
build() {
[ -f libgcc_s.so ] \
|| clang -shared -o libgcc_s.so \
-Wl,--allow-multiple-definition -Wl,--whole-archive \
$(clang -print-libgcc-file-name) -lunwind
}
package() {
[ -f $pkgdir/opt/rust/lib/rustlib/uninstall.sh ] \
|| ./rust-$pkgver-$ARCH-unknown-linux-musl/install.sh \
--disable-ldconfig \
--destdir=$pkgdir \
--prefix=/opt/rust
[ -f $pkgdir/opt/rust/lib/libgcc_s.so.1 ] \
|| cp ./libgcc_s.so $pkgdir/opt/rust/lib/libgcc_s.so.1
}
backup() {
return
}
license() {
return
}

59
docs/index.md
View file

@ -1,59 +0,0 @@
# Iglunix Linux
## Building
Inorder to build from source you need a complete LLVM/Musl toolchain.
I have provided one on the releases page on this repo.
```sh
tar -xf llvm...tar.xz -C $LBROOT
```
Next one must install musl from source
```sh
./configure --prefix=/usr --enable-wrapper=no
make
make install DESTDIR=$LBROOT
```
Next one must grab the binary releases of busybox and toybox from
their respective websites and place them in `$LBROOT/bin`
Next one needs to chroot into `$LBROOT`
```sh
doas chroot $LBROOT /bin/busybox --install -s
doas chroot $LBROOT /bin/sh
```
One may need to adjust their `$PATH`.
One needs to cross compile GNU Make and place it in `/usr/bin/gmake`
From here one needs to build the first package, `mksh` which will
allow one to rebuild `toybox` and `busybox`.
Clone this git repo into `$LBROOT/root/iglunix` and then chroot to `$LBROOT`
```sh
cd /root/iglunix
cd pkgs/mksh
../../iglupkg.sh
tar -xf out/mksh*.tar.xz -C /
cd ../..
cd pkgs/bmake
../../iglupkg.sh
tar -xf out/bmake*.tar.xz -C /
cd ../..
cd pkgs/gmake
../../iglupkg.sh
tar-xf out/gmake*.tar.xz -C /
cd ../../
```
Build packages like above. There is a problem with building CMake as it needs LibreSSL but LibreSSL needs CMake to build.
To get around this one will need to manually build LibreSSL with `./configure` first, then build CMake then rebuild
LibreSSL.

22
example.build.sh Normal file
View file

@ -0,0 +1,22 @@
fetch() {
# in ./src
# for fetching and patching source files
}
build() {
# in ./src
# configure and build
./configure --prefix=/
# make is bmake
make
}
package() {
# in ./src
# make is bmake
make install DESTDIR=$pkgdir
# samurai is the default ninja implementation
DESTDIR=$pkgdir samu install
# for rust programs we just do this
install -Dm755 target/release/$pkgname $pkgdir/bin
}

28
extra/alsa-lib/build.sh
View file

@ -1,28 +0,0 @@
pkgname=alsa-lib
pkgver=1.2.5.1
fetch() {
curl -L "http://www.alsa-project.org/files/pub/lib/alsa-lib-$pkgver.tar.bz2" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--build=$TRIPLE \
--host=$TRIPLE
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

34
extra/autossh/build.sh
View file

@ -1,34 +0,0 @@
pkgname=autossh
pkgver=1.4g
fetch() {
curl "https://www.harding.motd.ca/autossh/autossh-$pkgver.tgz" -LO
tar -xf $pkgname-$pkgver.tgz
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--sysconfdir=/etc \
--mandir=/usr/share/man \
--build=$TRIPLE \
--host=$TRIPLE
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
}
backup() {
return
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

22
extra/bat/build.sh
View file

@ -1,22 +0,0 @@
pkgname=bat
pkgver=0.17.1
fetch() {
curl -L "https://github.com/sharkdp/bat/archive/v$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
cargo build --release --locked --all-features
}
package() {
cd $pkgname-$pkgver
install -Dm 755 target/release/${pkgname} "${pkgdir}/usr/bin/"
}
license() {
cd $pkgname-$pkgver
cat LICENSE-MIT
}

30
extra/brotli/build.sh
View file

@ -1,30 +0,0 @@
pkgname=brotli
pkgver=1.0.9
fetch() {
curl -L "https://github.com/google/brotli/archive/refs/tags/v$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mkdir $pkgname-$pkgver/build
}
build() {
cd $pkgname-$pkgver
cd build
cmake -G Ninja ../ \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=/usr \
-DCMAKE_INSTALL_LIBDIR=lib
samu
}
package() {
cd $pkgname-$pkgver
cd build
DESTDIR=$pkgdir samu install
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

52
extra/bzip2/build.sh
View file

@ -1,52 +0,0 @@
pkgname=bzip2
pkgver=1.0.8
ext=dev
fetch() {
curl "https://sourceware.org/pub/bzip2/$pkgname-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
make -f Makefile-libbz2_so CC=cc
}
package() {
cd $pkgname-$pkgver
install -d $pkgdir/usr/lib/
install -Dm755 ./libbz2.so.$pkgver $pkgdir/usr/lib/
ln -sr $pkgdir/usr/lib/libbz2.so.$pkgver $pkgdir/usr/lib/libbz2.so
ln -sr $pkgdir/usr/lib/libbz2.so.$pkgver $pkgdir/usr/lib/libbz2.so.1
ln -sr $pkgdir/usr/lib/libbz2.so.$pkgver $pkgdir/usr/lib/libbz2.so.1.0
}
package_dev() {
cd $pkgname-$pkgver
install -d $pkgdir/usr/include/
install -Dm644 ./bzlib.h $pkgdir/usr/include/
install -d $pkgdir/usr/share/pkgconfig/
cat > $pkgdir/usr/share/pkgconfig/bzip2.pc << EOF
prefix=/usr
exec_prefix=/usr
bindir=${exec_prefix}/bin
libdir=${exec_prefix}/lib
includedir=${prefix}/include
Name: bzip2
Description: A file compression library
Version: @VERSION@
Libs: -L${libdir} -lbz2
Cflags: -I${includedir}
EOF
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

30
extra/cbindgen/build.sh
View file

@ -1,30 +0,0 @@
pkgname=cbindgen
pkgver=0.20.0
_clear_vendor_checksums() {
sed -i 's/\("files":{\)[^}]*/\1/' vendor/$1/.cargo-checksum.json
}
fetch() {
curl -L "https://github.com/eqrion/cbindgen/archive/refs/tags/v$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
cd $pkgname-$pkgver
mkdir -p .cargo
cargo vendor > .cargo/config
}
build() {
cd $pkgname-$pkgver
cargo build --release --locked --all-features
}
package() {
cd $pkgname-$pkgver
install -Dm755 target/release/$pkgname $pkgdir/usr/bin/$pkgname
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

30
extra/ccache/build.sh
View file

@ -1,30 +0,0 @@
pkgname=ccache
pkgver=4.2.1
fetch() {
curl -L "https://github.com/ccache/ccache/releases/download/v4.2.1/ccache-4.2.1.tar.xz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mkdir $pkgname-$pkgver/build
}
build() {
cd $pkgname-$pkgver
cd build
cmake -G Ninja ../ \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=/usr \
-DCMAKE_INSTALL_LIBDIR=lib
samu
}
package() {
cd $pkgname-$pkgver
cd build
DESTDIR=$pkgdir samu install
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

35
extra/distcc/build.sh
View file

@ -1,35 +0,0 @@
pkgname=distcc
pkgver=3.3.5
bad="gmake"
fetch() {
curl -L "https://github.com/distcc/distcc/releases/download/v$pkgver/distcc-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--build=x86_64-unknown-linux-musl \
--host=x86_64-unknown-linux-musl \
--without-libiberty
bad --gmake gmake
}
package() {
cd $pkgname-$pkgver
bad --gmake gmake install DESTDIR=$pkgdir
install -d $pkgdir/usr/lib/distcc
ln -sr $pkgdir/usr/bin/distcc $pkgdir/usr/lib/distcc/cc
ln -sr $pkgdir/usr/bin/distcc $pkgdir/usr/lib/distcc/c89
ln -sr $pkgdir/usr/bin/distcc $pkgdir/usr/lib/distcc/c99
ln -sr $pkgdir/usr/bin/distcc $pkgdir/usr/lib/distcc/c++
}
license() {
cd $pkgname-$pkgver
cat COPYING
}

30
extra/editorconfig-core-c/build.sh
View file

@ -1,30 +0,0 @@
pkgname=editorconfig-core-c
pkgver=0.12.5
fetch() {
curl -L "https://github.com/editorconfig/editorconfig-core-c/archive/refs/tags/v$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mkdir $pkgname-$pkgver/build
}
build() {
cd $pkgname-$pkgver
cd build
cmake -G Ninja ../ \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=/usr \
-DCMAKE_INSTALL_LIBDIR=lib
samu
}
package() {
cd $pkgname-$pkgver
cd build
DESTDIR=$pkgdir samu install
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

31
extra/exa/build.sh
View file

@ -1,31 +0,0 @@
pkgname=exa
pkgver=0.9.0
ext="doc"
fetch() {
curl -L "https://github.com/ogham/exa/archive/v$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
ln -s /usr/bin/gmake make
}
build() {
cd $pkgname-$pkgver
PATH=$(pwd)"/..:$PATH" cargo build --release --locked --all-features
}
package() {
cd $pkgname-$pkgver
cd target/release
install -Dm755 "$pkgname" "$pkgdir/usr/bin/"
}
package_doc() {
cd $pkgname-$pkgver
cd contrib/man
install -Dm644 $pkgname.1 $pkgdir/usr/share/man/man1/
}
license() {
cd $pkgname-$pkgver
cat LICENCE
}

31
extra/extra-cmake-modules/build.sh
View file

@ -1,31 +0,0 @@
pkgname=extra-cmake-modules
_ver_maj_min=5.82
pkgver=$_ver_maj_min.0
fetch() {
curl -L "https://download.kde.org/stable/frameworks/$_ver_maj_min/extra-cmake-modules-$pkgver.tar.xz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mkdir $pkgname-$pkgver/build
}
build() {
cd $pkgname-$pkgver
cd build
cmake -G Ninja ../ \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=/usr \
-DCMAKE_INSTALL_LIBDIR=lib
samu
}
package() {
cd $pkgname-$pkgver
cd build
DESTDIR=$pkgdir samu install
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

32
extra/fish/build.sh
View file

@ -1,32 +0,0 @@
pkgver=3.1.2
pkgname=fish
pkgrel=1
fetch() {
curl -L "https://github.com/fish-shell/fish-shell/releases/download/3.1.2/fish-3.1.2.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
cd $pkgname-$pkgver
patch -p1 < ../../output_tputs_cast.patch
}
build() {
cd $pkgname-$pkgver
mkdir build
cd build
cmake -G Ninja .. \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_EXE_LINKER_FLAGS=-lterminfo \
-DCMAKE_INSTALL_PREFIX='/usr'
samu
}
package() {
cd $pkgname-$pkgver
cd build
DESTDIR="$pkgdir/" samu install
}
license() {
cd $pkgname-$pkgver
cat COPYING
}

8
extra/fish/git_version_gen.patch
View file

@ -1,8 +0,0 @@
--- git_version_gen.sh.1
+++ git_version_gen.sh
@@ -1,4 +1,4 @@
-#!/usr/bin/env sh
+#!/bin/sh
# Originally from the git sources (GIT-VERSION-GEN)
# Presumably (C) Junio C Hamano <junkio@cox.net>
# Reused under GPL v2.0

11
extra/fish/output_tputs_cast.patch
View file

@ -1,11 +0,0 @@
--- a/src/output.cpp
+++ b/src/output.cpp
@@ -364,7 +364,7 @@
scoped_push<outputter_t *> push(&s_tputs_receiver, this);
// On some systems, tputs takes a char*, on others a const char*.
// Like tparm, we just cast it to unconst, that should work everywhere.
- return tputs(const_cast<char *>(str), affcnt, tputs_writer);
+ return tputs(const_cast<char *>(str), affcnt, (int (*)(int)) tputs_writer);
}
/// Write a wide character to the outputter. This should only be used when writing characters from

22
extra/glow/build.sh
View file

@ -1,22 +0,0 @@
pkgname=glow
pkgver=1.3.0
fetch() {
curl -L "https://github.com/charmbracelet/glow/archive/v$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
go build -o build/
}
package() {
cd $pkgname-$pkgver
install -Dm755 build/$pkgname $pkgdir/usr/bin/$pkgname
}
license() {
cd $pkgname-$pkgver
cat LICENSE
}

32
extra/go/build.sh
View file

@ -1,32 +0,0 @@
pkgname=go
pkgver=1.16
# TODO(Ella): should be loaded from `/etc/iglupkg.d/go.conf`
GOROOT_BOOTSTRAP=/usr/lib/go
fetch() {
curl -L "https://golang.org/dl/go${pkgver/_/}.src.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mv go go-$pkgver
}
build() {
cd $pkgname-$pkgver
cd src
GOROOT_BOOTSTRAP=/usr/lib/go ./make.bash
}
package() {
cd $pkgname-$pkgver
install -d $pkgdir/usr/bin
install -d $pkgdir/usr/lib/go
cp -a bin pkg src lib misc api test $pkgdir/usr/lib/go
ln -sr $pkgdir/usr/lib/go/bin/go $pkgdir/usr/bin/go
ln -sr $pkgdir/usr/lib/go/bin/gofmt $pkgdir/usr/bin/gofmt
}
license() {
cd $pkgname-$pkgver
cat LICENSE
}

23
extra/gyp/build.sh
View file

@ -1,23 +0,0 @@
pkgname=gyp
pkgver=master
fetch() {
curl -L "https://github.com/chromium/gyp/archive/refs/heads/master.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
python setup.py build
}
package() {
cd $pkgname-$pkgver
python setup.py install --root=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

37
extra/heirloom-doctools/build.sh
View file

@ -1,37 +0,0 @@
pkgver=master
pkgname=heirloom-doctools
pkgrel=1
deps="musl"
bad="gmake"
ext="doc"
fetch() {
curl -L "https://github.com/n-t-roff/heirloom-doctools/archive/master.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
cd $pkgname-$pkgver
cp ../../mk.config .
}
build() {
cd $pkgname-$pkgver
./configure
bad --gmake gmake
}
package() {
cd $pkgname-$pkgver
bad --gmake gmake install ROOT=$pkgdir
rm -r $pkgdir/usr/share
}
package_doc() {
cd $pkgname-$pkgver
bad --gmake gmake install ROOT=$pkgdir
rm -r $pkgdir/usr/lib
rm -r $pkgdir/usr/bin
}
license() {
cd $pkgname-$pkgver
cat LICENSE
}

109
extra/heirloom-doctools/mk.config
View file

@ -1,109 +0,0 @@
#
# A BSD-compatible install command.
#
INSTALL=install
#
# Packaging prefix.
#
PREFIX=/usr
#
# Where to place binaries.
#
BINDIR=$(PREFIX)/bin
#
# Where to place libraries.
#
LIBDIR=$(PREFIX)/lib
#
# Where to place ASCII charts and the like.
#
PUBDIR=$(PREFIX)/lib/doctools/pub
#
# Where to place manual pages.
#
MANDIR=$(PREFIX)/share/man
#
# Where to place the troff macro packages.
#
MACDIR=$(LIBDIR)/doctools/tmac
#
# Where to place the troff font files.
#
FNTDIR=$(LIBDIR)/doctools/font
#
# Where to place PostScript helper files.
#
PSTDIR=$(FNTDIR)/devpost/postscript
#
# Where to place the nroff terminal description files.
#
TABDIR=$(LIBDIR)/doctools/nterm
#
# Where to place troff hyphenation files.
#
HYPDIR=$(LIBDIR)/doctools/hyphen
#
# Where to place files belonging to the "refer" utility.
#
REFDIR=$(LIBDIR)/reftools
#
# Define this if you want troff and nroff to be able to process
# locale-specific (8-bit) characters. It requires appropriate support
# from the C library, so it does not work e.g. with diet libc.
#
EUC=-DEUC
#
# Binaries are stripped with this command after installation.
#
STRIP=strip
#
# The C compiler.
#
CC=cc
#
# The C++ compiler.
#
CXX=c++
#
# Compiler flags.
#
_CFLAGS=$(CFLAGS) $(_CPPFLAGS) $(__CDBG) $(__CLDBG)
#
# C preprocessor flags.
#
# Use -D_GNU_SOURCE for Linux with GNU libc.
# Use -D_INCLUDE__STDC_A1_SOURCE for HP-UX.
#
_CPPFLAGS=$(CPPFLAGS) -D_GNU_SOURCE
#
# Linker flags.
#
_LDFLAGS=$(LDFLAGS) $(__CLDBG)
#
# Additional libraries to link with.
#
#LIBS=
#
# A Bourne-compatible shell.
#
SHELL=/bin/sh

30
extra/json-c/build.sh
View file

@ -1,30 +0,0 @@
pkgname=json-c
pkgver=0.15
fetch() {
curl -L "https://s3.amazonaws.com/json-c_releases/releases/json-c-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mkdir $pkgname-$pkgver/build
}
build() {
cd $pkgname-$pkgver
cd build
cmake -G Ninja ../ \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=/usr \
-DCMAKE_INSTALL_LIBDIR=lib
samu
}
package() {
cd $pkgname-$pkgver
cd build
DESTDIR=$pkgdir samu install
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

24
extra/kak-lsp/build.sh
View file

@ -1,24 +0,0 @@
pkgname=kak-lsp
pkgver=9.0.0
fetch() {
curl -L "https://github.com/kak-lsp/kak-lsp/archive/v$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
cargo build --release --locked --all-features
}
package() {
cd $pkgname-$pkgver
install -Dm755 target/release/$pkgname $pkgdir/usr/bin/
install -Dm644 rc/lsp.kak $pkgdir/usr/share/kak-lsp/rc/
install -Dm644 kak-lsp.toml $pkgdir/usr/share/kak-lsp/examples/
}
license() {
cd $pkgname-$pkgver
cat UNLICENSE
}

28
extra/libarchive/build.sh
View file

@ -1,28 +0,0 @@
pkgname=libarchive
pkgver=3.5.1
fetch() {
curl "http://libarchive.org/downloads/libarchive-$pkgver.tar.xz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--build=$TRIPLE \
--host=$TRIPLE
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

29
extra/libevent/build.sh
View file

@ -1,29 +0,0 @@
pkgname=libevent
pkgver=2.1.12
fetch() {
curl -L "https://github.com/libevent/libevent/releases/download/release-$pkgver-stable/libevent-$pkgver-stable.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mv libevent-$pkgver-stable $pkgname-$pkgver
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--build=$TRIPLE \
--host=$TRIPLE
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

28
extra/libexecinfo/build.sh
View file

@ -1,28 +0,0 @@
pkgname=libexecinfo
pkgver=20180201
fetch() {
curl -L "https://github.com/resslinux/libexecinfo/archive/refs/tags/v$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--build=$TRIPLE \
--host=$TRIPLE
make
}
package() {
cd $pkgname-$pkgver
make install DESTDIR=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

30
extra/librespot/build.sh
View file

@ -1,30 +0,0 @@
pkgname=librespot
pkgver=0.2.0
_clear_vendor_checksums() {
sed -i 's/\("files":{\)[^}]*/\1/' vendor/$1/.cargo-checksum.json
}
fetch() {
curl -L "https://github.com/librespot-org/librespot/archive/refs/tags/v$pkgver.tar.gz" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
cd $pkgname-$pkgver
mkdir -p .cargo
cargo vendor > .cargo/config
}
build() {
cd $pkgname-$pkgver
cargo build --release --locked --no-default-features --features alsa-backend
}
package() {
cd $pkgname-$pkgver
install -Dm755 target/release/$pkgname $pkgdir/usr/bin/$pkgname
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

30
extra/libxml2/build.sh
View file

@ -1,30 +0,0 @@
pkgver=2.9.10
pkgname=libxml2
bad=""
ext="dev"
fetch() {
curl "ftp://xmlsoft.org/libxml2/libxml2-2.9.10.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
}
build() {
cd $pkgname-$pkgver
./configure --prefix=/usr --without-python
bad --gmake gmake
}
package() {
cd $pkgname-$pkgver
bad --gmake gmake install DESTDIR=$pkgdir
}
package_dev() {
cd $pkgname-$pkgver
bad --gmake gmake install DESTDIR=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat Copyright
}

28
extra/lua/build.sh
View file

@ -1,28 +0,0 @@
pkgname=lua
pkgver=5.4.3
fetch() {
curl "http://www.lua.org/ftp/lua-$pkgver.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--build=$TRIPLE \
--host=$TRIPLE
make CC=cc
}
package() {
cd $pkgname-$pkgver
make install INSTALL_TOP=$pkgdir/usr
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

31
extra/lynx/build.sh
View file

@ -1,31 +0,0 @@
pkgname=lynx
pkgver=2.8.9
fetch() {
curl "https://invisible-mirror.net/archives/lynx/tarballs/lynx2.8.9rel.1.tar.bz2" -o $pkgname-$pkgver.tar.xz
tar -xf $pkgname-$pkgver.tar.xz
mv lynx2.8.9rel.1 $pkgname-$pkgver
}
build() {
cd $pkgname-$pkgver
./configure \
--prefix=/usr \
--sysconfdir=/etc \
--with-ssl=/usr \
--build=x86_64-unknown-linux-musl \
--host=x86_64-unknown-linux-musl
bad --gmake gmake
}
package() {
cd $pkgname-$pkgver
bad --gmake gmake install DESTDIR=$pkgdir
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

27
extra/mold/build.sh
View file

@ -1,27 +0,0 @@
pkgname=mold
pkgver=main
deps="musl:libexecinfo"
fetch() {
curl -L "https://github.com/rui314/mold/archive/refs/heads/main.tar.gz" -o $pkgname-$pkgver.tar.gz
tar -xf $pkgname-$pkgver.tar.gz
cd $pkgname-$pkgver
patch -p1 < ../../musl.patch
}
build() {
cd $pkgname-$pkgver
bad --gmake gmake
}
package() {
cd $pkgname-$pkgver
bad --gmake gmake install DESTDIR=$pkgdir
ln -sr $pkgdir/usr/bin/mold $pkgdir/usr/bin/ld.mold
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

95
extra/mold/musl.patch
View file

@ -1,95 +0,0 @@
diff --git a/Makefile b/Makefile
index 1b36943..c6e0407 100644
--- a/Makefile
+++ b/Makefile
@@ -8,7 +8,7 @@ CPPFLAGS = -g -Imimalloc/include -pthread -std=c++20 \
-DGIT_HASH=\"$(GIT_HASH)\" \
$(EXTRA_CPPFLAGS)
LDFLAGS += $(EXTRA_LDFLAGS) -rdynamic
-LIBS = -Wl,-as-needed -lcrypto -pthread -lz -lxxhash -ldl -lm
+LIBS = -Wl,-as-needed -lcrypto -pthread -lz -lxxhash -lexecinfo -ldl -lm
OBJS = main.o object_file.o input_sections.o output_chunks.o \
mapfile.o perf.o linker_script.o archive_file.o output_file.o \
subprocess.o gc_sections.o icf.o symbols.o cmdline.o filepath.o \
diff --git a/mold.h b/mold.h
index 550545c..8bab9b9 100644
--- a/mold.h
+++ b/mold.h
@@ -27,6 +27,7 @@
#include <tbb/task_group.h>
#include <unistd.h>
#include <unordered_set>
+#include <unordered_map>
#include <vector>
#include <xxh3.h>
@@ -41,6 +42,9 @@ typedef int32_t i32;
typedef int64_t i64;
static constexpr i32 SECTOR_SIZE = 512;
+#ifdef PAGE_SIZE
+#undef PAGE_SIZE
+#endif
static constexpr i32 PAGE_SIZE = 4096;
static constexpr i32 SHA256_SIZE = 32;
@@ -2198,7 +2202,7 @@ InputFile<E>::get_string(Context<E> &ctx, const ElfShdr<E> &shdr) {
u8 *end = begin + shdr.sh_size;
if (mb->data(ctx) + mb->size() < end)
Fatal(ctx) << *this << ": shdr corrupted";
- return {(char *)begin, (char *)end};
+ return {(char *)begin, (size_t)(end-begin)};
}
template <typename E>
diff --git a/oneTBB/include/oneapi/tbb/detail/_config.h b/oneTBB/include/oneapi/tbb/detail/_config.h
index 27a3dd7..bb422b0 100644
--- a/oneTBB/include/oneapi/tbb/detail/_config.h
+++ b/oneTBB/include/oneapi/tbb/detail/_config.h
@@ -257,7 +257,7 @@
#define __TBB_CPP20_COMPARISONS_PRESENT __TBB_CPP20_PRESENT
#endif
-#define __TBB_RESUMABLE_TASKS (!__TBB_WIN8UI_SUPPORT && !__ANDROID__)
+#define __TBB_RESUMABLE_TASKS (!__TBB_WIN8UI_SUPPORT && __GLIBC__)
/* This macro marks incomplete code or comments describing ideas which are considered for the future.
* See also for plain comment with TODO and FIXME marks for small improvement opportunities.
diff --git a/oneTBB/src/tbbmalloc_proxy/proxy.cpp b/oneTBB/src/tbbmalloc_proxy/proxy.cpp
index b286e51..8057708 100644
--- a/oneTBB/src/tbbmalloc_proxy/proxy.cpp
+++ b/oneTBB/src/tbbmalloc_proxy/proxy.cpp
@@ -24,7 +24,8 @@
// of aligned_alloc as required by new C++ standard, this makes it hard to
// redefine aligned_alloc here. However, running on systems with new libc
// version, it still needs it to be redefined, thus tricking system headers
-#if defined(__GLIBC_PREREQ) && !__GLIBC_PREREQ(2, 16) && _GLIBCXX_HAVE_ALIGNED_ALLOC
+#if defined(__GLIBC_PREREQ)
+#if !__GLIBC_PREREQ(2, 16) && _GLIBCXX_HAVE_ALIGNED_ALLOC
// tell <cstdlib> that there is no aligned_alloc
#undef _GLIBCXX_HAVE_ALIGNED_ALLOC
// trick <stdlib.h> to define another symbol instead
@@ -33,6 +34,7 @@
#include <cstdlib>
#undef aligned_alloc
#endif // defined(__GLIBC_PREREQ)&&!__GLIBC_PREREQ(2, 16)&&_GLIBCXX_HAVE_ALIGNED_ALLOC
+#endif // defined(__GLIBC_PREREQ)
#endif // __linux__ && !__ANDROID__
#include "proxy.h"
@@ -256,6 +258,7 @@ int mallopt(int /*param*/, int /*value*/) __THROW
return 1;
}
+#ifdef __GLIBC__
struct mallinfo mallinfo() __THROW
{
struct mallinfo m;
@@ -263,6 +266,7 @@ struct mallinfo mallinfo() __THROW
return m;
}
+#endif
#if __ANDROID__
// Android doesn't have malloc_usable_size, provide it to be compatible

54
extra/ncspot/build.sh
View file

@ -1,54 +0,0 @@
pkgname=ncspot
pkgver=0.8.1
_clear_vendor_checksums() {
sed -i 's/\("files":{\)[^}]*/\1/' vendor/$1/.cargo-checksum.json
}
fetch() {
curl -L "https://github.com/hrkfdn/ncspot/archive/refs/tags/v$pkgver.tar.gz" -o $pkgname-$pkgver.tar.gz
# curl -L "https://github.com/sfackler/rust-openssl/archive/refs/tags/openssl-v0.10.34.tar.gz" -o rust-openssl.tar.gz
curl -L "https://github.com/Ella-0/ncurses-rs/archive/refs/heads/master.tar.gz" -o ncurses.tar.gz
curl -L "https://github.com/Ella-0/pancurses/archive/refs/heads/master.tar.gz" -o pancurses.tar.gz
tar -xf ncurses.tar.gz
mv ncurses-rs-master ncurses
tar -xf pancurses.tar.gz
mv pancurses-master pancurses
tar -xf $pkgname-$pkgver.tar.gz
tar -xf rust-openssl.tar.gz
cp ../cursive_ptr.patch .
cd $pkgname-$pkgver
mkdir -p .cargo
cargo vendor > .cargo/config
# _clear_vendor_checksums openssl-sys
# _clear_vendor_checksums openssl
_clear_vendor_checksums ncurses
_clear_vendor_checksums pancurses
_clear_vendor_checksums cursive
# cp -r ../rust-openssl-openssl-v0.10.34/openssl/ vendor/
# cp -r ../rust-openssl-openssl-v0.10.34/openssl-sys/ vendor/
cp -r ../ncurses/ vendor/
cp -r ../pancurses/ vendor/
# sed vendor/openssl/Cargo.toml -i -e 's/0.10.34/0.10.33/g'
# sed vendor/openssl/Cargo.toml -i -e 's/0.9.62/0.9.61/g'
# sed vendor/openssl-sys/Cargo.toml -i -e 's/0.9.62/0.9.61/g'
sed vendor/ncurses/Cargo.toml -i -e 's/5.100.0/5.101.0/g'
patch -p1 < ../cursive_ptr.patch
}
build() {
cd $pkgname-$pkgver
cargo build --release --no-default-features --features cursive/pancurses-backend,alsa_backend
}
package() {
cd $pkgname-$pkgver
install -Dm 755 target/release/$pkgname $pkgdir/usr/bin/
}
license() {
cd $pkgname-$pkgver
cat LICENSE
# cat COPYING
}

Some files were not shown because too many files have changed in this diff Show more