Nest spec types

src/spectator/dsl/builder.cr

@@ -1,5 +1,7 @@
-require "../spec"
-require "../spec_builder"
+require "../example_group_hook"
+require "../example_hook"
+require "../example_procsy_hook"
+require "../spec/builder"
 
 module Spectator::DSL
   # Incrementally builds up a test spec from the DSL.
@@ -8,7 +10,7 @@ module Spectator::DSL
     extend self
 
     # Underlying spec builder.
-    @@builder = SpecBuilder.new
+    @@builder = Spec::Builder.new
 
     # Defines a new example group and pushes it onto the group stack.
     # Examples and groups defined after calling this method will be nested under the new group.

src/spectator/dsl/examples.cr

@@ -49,7 +49,7 @@ module Spectator::DSL
     # Inserts the correct representation of a example's name.
     # If *what* is a string, then it is dropped in as-is.
     # For anything else, it is stringified.
-    # This is intended to be used to convert a description from the spec DSL to `SpecNode#name`.
+    # This is intended to be used to convert a description from the spec DSL to `Spec::Node#name`.
     private macro _spectator_example_name(what)
       {% if what.is_a?(StringLiteral) ||
               what.is_a?(StringInterpolation) ||

src/spectator/dsl/groups.cr

@@ -32,7 +32,7 @@ module Spectator::DSL
     # If *what* appears to be a type name, it will be symbolized.
     # If it's a string, then it is dropped in as-is.
     # For anything else, it is stringified.
-    # This is intended to be used to convert a description from the spec DSL to `SpecNode#name`.
+    # This is intended to be used to convert a description from the spec DSL to `Spec::Node#name`.
     private macro _spectator_group_name(what)
       {% if (what.is_a?(Generic) ||
               what.is_a?(Path) ||

src/spectator/example.cr

@@ -4,11 +4,11 @@ require "./harness"
 require "./pending_result"
 require "./result"
 require "./source"
-require "./spec_node"
+require "./spec/node"
 
 module Spectator
   # Standard example that runs a test case.
-  class Example < SpecNode
+  class Example < Spec::Node
     # Currently running example.
     class_getter! current : Example
 

src/spectator/example_group.cr

@@ -1,15 +1,15 @@
 require "./events"
-require "./spec_node"
 require "./example_procsy_hook"
+require "./spec/node"
 
 module Spectator
   # Collection of examples and sub-groups.
-  class ExampleGroup < SpecNode
-    include Enumerable(SpecNode)
+  class ExampleGroup < Spec::Node
+    include Enumerable(Spec::Node)
     include Events
-    include Iterable(SpecNode)
+    include Iterable(Spec::Node)
 
-    @nodes = [] of SpecNode
+    @nodes = [] of Spec::Node
 
     group_event before_all do |hooks|
       Log.trace { "Processing before_all hooks for #{self}" }
@@ -65,7 +65,7 @@ module Spectator
 
     # Removes the specified *node* from the group.
     # The node will be unassigned from this group.
-    def delete(node : SpecNode)
+    def delete(node : Spec::Node)
       # Only remove from the group if it is associated with this group.
       return unless node.group == self
 
@@ -92,7 +92,7 @@ module Spectator
     # Assigns the node to this group.
     # If the node already belongs to a group,
     # it will be removed from the previous group before adding it to this group.
-    def <<(node : SpecNode)
+    def <<(node : Spec::Node)
       # Remove from existing group if the node is part of one.
       if (previous = node.group?)
         previous.delete(node)

src/spectator/example_iterator.cr

@@ -1,6 +1,6 @@
 require "./example"
 require "./example_group"
-require "./spec_node"
+require "./spec/node"
 
 module Spectator
   # Iterates through all examples in a group and its nested groups.
@@ -9,12 +9,12 @@ module Spectator
 
     # Stack that contains the iterators for each group.
     # A stack is used to track where in the tree this iterator is.
-    @stack : Array(Iterator(SpecNode))
+    @stack : Array(Iterator(Spec::Node))
 
     # Creates a new iterator.
     # The *group* is the example group to iterate through.
     def initialize(@group : ExampleGroup)
-      iter = @group.each.as(Iterator(SpecNode))
+      iter = @group.each.as(Iterator(Spec::Node))
       @stack = [iter]
     end
 
@@ -39,7 +39,7 @@ module Spectator
     # Restart the iterator at the beginning.
     def rewind
       # Same code as `#initialize`, but return self.
-      iter = @group.each.as(Iterator(SpecNode))
+      iter = @group.each.as(Iterator(Spec::Node))
       @stack = [iter]
       self
     end

src/spectator/spec.cr

@@ -19,14 +19,7 @@ module Spectator
       examples = ExampleIterator.new(@root).to_a
       @config.shuffle!(examples)
     end
-
-    private struct Runner
-      def initialize(@examples : Array(Example))
+  end
 end
 
-      def run
-        @examples.each(&.run)
-      end
-    end
-  end
-end
+require "./spec/*"

src/spectator/spec/builder.cr

@@ -0,0 +1,206 @@
+require "../config"
+require "../config_builder"
+require "../example"
+require "../example_context_method"
+require "../example_group"
+require "../spec"
+
+module Spectator
+  class Spec
+    # Progressively builds a test spec.
+    #
+    # A stack is used to track the current example group.
+    # Adding an example or group will nest it under the group at the top of the stack.
+    class Builder
+      Log = ::Spectator::Log.for(self)
+
+      # Stack tracking the current group.
+      # The bottom of the stack (first element) is the root group.
+      # The root group should never be removed.
+      # The top of the stack (last element) is the current group.
+      # New examples should be added to the current group.
+      @group_stack : Deque(ExampleGroup)
+
+      # Configuration for the spec.
+      @config : Config?
+
+      # Creates a new spec builder.
+      # A root group is pushed onto the group stack.
+      def initialize
+        root_group = ExampleGroup.new
+        @group_stack = Deque(ExampleGroup).new
+        @group_stack.push(root_group)
+      end
+
+      # Constructs the test spec.
+      # Returns the spec instance.
+      #
+      # Raises an error if there were not symmetrical calls to `#start_group` and `#end_group`.
+      # This would indicate a logical error somewhere in Spectator or an extension of it.
+      def build : Spec
+        raise "Mismatched start and end groups" unless root?
+
+        Spec.new(root_group, config)
+      end
+
+      # Defines a new example group and pushes it onto the group stack.
+      # Examples and groups defined after calling this method will be nested under the new group.
+      # The group will be finished and popped off the stack when `#end_example` is called.
+      #
+      # The *name* is the name or brief description of the group.
+      # This should be a symbol when describing a type - the type name is represented as a symbol.
+      # Otherwise, a string should be used.
+      #
+      # The *source* optionally defined where the group originates in source code.
+      #
+      # The newly created group is returned.
+      # It shouldn't be used outside of this class until a matching `#end_group` is called.
+      def start_group(name, source = nil) : ExampleGroup
+        Log.trace { "Start group: #{name.inspect} @ #{source}" }
+        ExampleGroup.new(name, source, current_group).tap do |group|
+          @group_stack << group
+        end
+      end
+
+      # Completes a previously defined example group and pops it off the group stack.
+      # Be sure to call `#start_group` and `#end_group` symmetically.
+      #
+      # The completed group will be returned.
+      # At this point, it is safe to use the group.
+      # All of its examples and sub-groups have been populated.
+      def end_group : ExampleGroup
+        Log.trace { "End group: #{current_group}" }
+        raise "Can't pop root group" if root?
+
+        @group_stack.pop
+      end
+
+      # Defines a new example.
+      # The example is added to the group currently on the top of the stack.
+      #
+      # The *name* is the name or brief description of the example.
+      # This should be a string or nil.
+      # When nil, the example's name will be populated by the first expectation run inside of the test code.
+      #
+      # The *source* optionally defined where the example originates in source code.
+      #
+      # The *context* is an instance of the context the test code should run in.
+      # See `Context` for more information.
+      #
+      # A block must be provided.
+      # It will be yielded two arguments - the example created by this method, and the *context* argument.
+      # The return value of the block is ignored.
+      # It is expected that the test code runs when the block is called.
+      #
+      # The newly created example is returned.
+      def add_example(name, source, context, &block : Example -> _) : Example
+        Log.trace { "Add example: #{name} @ #{source}" }
+        Example.new(context, block, name, source, current_group)
+        # The example is added to the current group by `Example` initializer.
+      end
+
+      # Attaches a hook to be invoked before any and all examples in the current group.
+      def before_all(hook)
+        Log.trace { "Add before_all hook #{hook}" }
+        current_group.add_before_all_hook(hook)
+      end
+
+      # Defines a block of code to execute before any and all examples in the current group.
+      def before_all(&block)
+        Log.trace { "Add before_all hook" }
+        current_group.before_all(&block)
+      end
+
+      # Attaches a hook to be invoked before every example in the current group.
+      # The current example is provided as a block argument.
+      def before_each(hook)
+        Log.trace { "Add before_each hook #{hook}" }
+        current_group.add_before_each_hook(hook)
+      end
+
+      # Defines a block of code to execute before every example in the current group.
+      # The current example is provided as a block argument.
+      def before_each(&block : Example -> _)
+        Log.trace { "Add before_each hook block" }
+        current_group.before_each(&block)
+      end
+
+      # Attaches a hook to be invoked after any and all examples in the current group.
+      def after_all(hook)
+        Log.trace { "Add after_all hook #{hook}" }
+        current_group.add_after_all_hook(hook)
+      end
+
+      # Defines a block of code to execute after any and all examples in the current group.
+      def after_all(&block)
+        Log.trace { "Add after_all hook" }
+        current_group.after_all(&block)
+      end
+
+      # Attaches a hook to be invoked after every example in the current group.
+      # The current example is provided as a block argument.
+      def after_each(hook)
+        Log.trace { "Add after_each hook #{hook}" }
+        current_group.add_after_each_hook(hook)
+      end
+
+      # Defines a block of code to execute after every example in the current group.
+      # The current example is provided as a block argument.
+      def after_each(&block : Example -> _)
+        Log.trace { "Add after_each hook" }
+        current_group.after_each(&block)
+      end
+
+      # Attaches a hook to be invoked around every example in the current group.
+      # The current example in procsy form is provided as a block argument.
+      def around_each(hook)
+        Log.trace { "Add around_each hook #{hook}" }
+        current_group.add_around_each_hook(hook)
+      end
+
+      # Defines a block of code to execute around every example in the current group.
+      # The current example in procsy form is provided as a block argument.
+      def around_each(&block : Example -> _)
+        Log.trace { "Add around_each hook" }
+        current_group.around_each(&block)
+      end
+
+      # Builds the configuration to use for the spec.
+      # A `ConfigBuilder` is yielded to the block provided to this method.
+      # That builder will be used to create the configuration.
+      def config
+        builder = ConfigBuilder.new
+        yield builder
+        @config = builder.build
+      end
+
+      # Sets the configuration of the spec.
+      # This configuration controls how examples run.
+      def config=(config)
+        @config = config
+      end
+
+      # Checks if the current group is the root group.
+      private def root?
+        @group_stack.size == 1
+      end
+
+      # Retrieves the root group.
+      private def root_group
+        @group_stack.first
+      end
+
+      # Retrieves the current group, which is at the top of the stack.
+      # This is the group that new examples should be added to.
+      private def current_group
+        @group_stack.last
+      end
+
+      # Retrieves the configuration.
+      # If one wasn't previously set, a default configuration is used.
+      private def config : Config
+        @config || ConfigBuilder.default
+      end
+    end
+  end
+end

src/spectator/spec/node.cr

@@ -0,0 +1,71 @@
+require "../label"
+require "../source"
+
+module Spectator
+  class Spec
+    # A single item in a test spec.
+    # This is commonly an `Example` or `ExampleGroup`,
+    # but can be anything that should be iterated over when running the spec.
+    abstract class Node
+      # Location of the node in source code.
+      getter! source : Source
+
+      # User-provided name or description of the node.
+      # This does not include the group name or descriptions.
+      # Use `#to_s` to get the full name.
+      #
+      # This value will be nil if no name was provided.
+      # In this case, and the node is a runnable example,
+      # the name should be set to the description
+      # of the first matcher that runs in the test case.
+      #
+      # If this value is a `Symbol`, the user specified a type for the name.
+      getter! name : Label
+
+      # Updates the name of the node.
+      protected def name=(@name : String)
+      end
+
+      # Group the node belongs to.
+      getter! group : ExampleGroup
+
+      # Assigns the node to the specified *group*.
+      # This is an internal method and should only be called from `ExampleGroup`.
+      # `ExampleGroup` manages the association of nodes to groups.
+      protected setter group : ExampleGroup?
+
+      # Creates the node.
+      # The *name* describes the purpose of the node.
+      # It can be a `Symbol` to describe a type.
+      # The *source* tracks where the node exists in source code.
+      # The node will be assigned to *group* if it is provided.
+      def initialize(@name : Label = nil, @source : Source? = nil, group : ExampleGroup? = nil)
+        # Ensure group is linked.
+        group << self if group
+      end
+
+      # Indicates whether the node has completed.
+      abstract def finished? : Bool
+
+      # Constructs the full name or description of the node.
+      # This prepends names of groups this node is part of.
+      def to_s(io)
+        name = @name
+
+        # Prefix with group's full name if the node belongs to a group.
+        if (group = @group)
+          group.to_s(io)
+
+          # Add padding between the node names
+          # only if the names don't appear to be symbolic.
+          # Skip blank group names (like the root group).
+          io << ' ' unless !group.name? || # ameba:disable Style/NegatedConditionsInUnless
+                           (group.name?.is_a?(Symbol) && name.is_a?(String) &&
+                           (name.starts_with?('#') || name.starts_with?('.')))
+        end
+
+        name.to_s(io)
+      end
+    end
+  end
+end

src/spectator/spec/runner.cr

@@ -0,0 +1,14 @@
+require "../example"
+
+module Spectator
+  class Spec
+    private struct Runner
+      def initialize(@examples : Array(Example))
+      end
+
+      def run
+        @examples.each(&.run)
+      end
+    end
+  end
+end

src/spectator/spec_builder.cr

@@ -1,203 +0,0 @@
-require "./config"
-require "./config_builder"
-require "./example"
-require "./example_context_method"
-require "./example_group"
-
-module Spectator
-  # Progressively builds a test spec.
-  #
-  # A stack is used to track the current example group.
-  # Adding an example or group will nest it under the group at the top of the stack.
-  class SpecBuilder
-    Log = ::Spectator::Log.for(self)
-
-    # Stack tracking the current group.
-    # The bottom of the stack (first element) is the root group.
-    # The root group should never be removed.
-    # The top of the stack (last element) is the current group.
-    # New examples should be added to the current group.
-    @group_stack : Deque(ExampleGroup)
-
-    # Configuration for the spec.
-    @config : Config?
-
-    # Creates a new spec builder.
-    # A root group is pushed onto the group stack.
-    def initialize
-      root_group = ExampleGroup.new
-      @group_stack = Deque(ExampleGroup).new
-      @group_stack.push(root_group)
-    end
-
-    # Constructs the test spec.
-    # Returns the spec instance.
-    #
-    # Raises an error if there were not symmetrical calls to `#start_group` and `#end_group`.
-    # This would indicate a logical error somewhere in Spectator or an extension of it.
-    def build : Spec
-      raise "Mismatched start and end groups" unless root?
-
-      Spec.new(root_group, config)
-    end
-
-    # Defines a new example group and pushes it onto the group stack.
-    # Examples and groups defined after calling this method will be nested under the new group.
-    # The group will be finished and popped off the stack when `#end_example` is called.
-    #
-    # The *name* is the name or brief description of the group.
-    # This should be a symbol when describing a type - the type name is represented as a symbol.
-    # Otherwise, a string should be used.
-    #
-    # The *source* optionally defined where the group originates in source code.
-    #
-    # The newly created group is returned.
-    # It shouldn't be used outside of this class until a matching `#end_group` is called.
-    def start_group(name, source = nil) : ExampleGroup
-      Log.trace { "Start group: #{name.inspect} @ #{source}" }
-      ExampleGroup.new(name, source, current_group).tap do |group|
-        @group_stack << group
-      end
-    end
-
-    # Completes a previously defined example group and pops it off the group stack.
-    # Be sure to call `#start_group` and `#end_group` symmetically.
-    #
-    # The completed group will be returned.
-    # At this point, it is safe to use the group.
-    # All of its examples and sub-groups have been populated.
-    def end_group : ExampleGroup
-      Log.trace { "End group: #{current_group}" }
-      raise "Can't pop root group" if root?
-
-      @group_stack.pop
-    end
-
-    # Defines a new example.
-    # The example is added to the group currently on the top of the stack.
-    #
-    # The *name* is the name or brief description of the example.
-    # This should be a string or nil.
-    # When nil, the example's name will be populated by the first expectation run inside of the test code.
-    #
-    # The *source* optionally defined where the example originates in source code.
-    #
-    # The *context* is an instance of the context the test code should run in.
-    # See `Context` for more information.
-    #
-    # A block must be provided.
-    # It will be yielded two arguments - the example created by this method, and the *context* argument.
-    # The return value of the block is ignored.
-    # It is expected that the test code runs when the block is called.
-    #
-    # The newly created example is returned.
-    def add_example(name, source, context, &block : Example -> _) : Example
-      Log.trace { "Add example: #{name} @ #{source}" }
-      Example.new(context, block, name, source, current_group)
-      # The example is added to the current group by `Example` initializer.
-    end
-
-    # Attaches a hook to be invoked before any and all examples in the current group.
-    def before_all(hook)
-      Log.trace { "Add before_all hook #{hook}" }
-      current_group.add_before_all_hook(hook)
-    end
-
-    # Defines a block of code to execute before any and all examples in the current group.
-    def before_all(&block)
-      Log.trace { "Add before_all hook" }
-      current_group.before_all(&block)
-    end
-
-    # Attaches a hook to be invoked before every example in the current group.
-    # The current example is provided as a block argument.
-    def before_each(hook)
-      Log.trace { "Add before_each hook #{hook}" }
-      current_group.add_before_each_hook(hook)
-    end
-
-    # Defines a block of code to execute before every example in the current group.
-    # The current example is provided as a block argument.
-    def before_each(&block : Example -> _)
-      Log.trace { "Add before_each hook block" }
-      current_group.before_each(&block)
-    end
-
-    # Attaches a hook to be invoked after any and all examples in the current group.
-    def after_all(hook)
-      Log.trace { "Add after_all hook #{hook}" }
-      current_group.add_after_all_hook(hook)
-    end
-
-    # Defines a block of code to execute after any and all examples in the current group.
-    def after_all(&block)
-      Log.trace { "Add after_all hook" }
-      current_group.after_all(&block)
-    end
-
-    # Attaches a hook to be invoked after every example in the current group.
-    # The current example is provided as a block argument.
-    def after_each(hook)
-      Log.trace { "Add after_each hook #{hook}" }
-      current_group.add_after_each_hook(hook)
-    end
-
-    # Defines a block of code to execute after every example in the current group.
-    # The current example is provided as a block argument.
-    def after_each(&block : Example -> _)
-      Log.trace { "Add after_each hook" }
-      current_group.after_each(&block)
-    end
-
-    # Attaches a hook to be invoked around every example in the current group.
-    # The current example in procsy form is provided as a block argument.
-    def around_each(hook)
-      Log.trace { "Add around_each hook #{hook}" }
-      current_group.add_around_each_hook(hook)
-    end
-
-    # Defines a block of code to execute around every example in the current group.
-    # The current example in procsy form is provided as a block argument.
-    def around_each(&block : Example -> _)
-      Log.trace { "Add around_each hook" }
-      current_group.around_each(&block)
-    end
-
-    # Builds the configuration to use for the spec.
-    # A `ConfigBuilder` is yielded to the block provided to this method.
-    # That builder will be used to create the configuration.
-    def config
-      builder = ConfigBuilder.new
-      yield builder
-      @config = builder.build
-    end
-
-    # Sets the configuration of the spec.
-    # This configuration controls how examples run.
-    def config=(config)
-      @config = config
-    end
-
-    # Checks if the current group is the root group.
-    private def root?
-      @group_stack.size == 1
-    end
-
-    # Retrieves the root group.
-    private def root_group
-      @group_stack.first
-    end
-
-    # Retrieves the current group, which is at the top of the stack.
-    # This is the group that new examples should be added to.
-    private def current_group
-      @group_stack.last
-    end
-
-    # Retrieves the configuration.
-    # If one wasn't previously set, a default configuration is used.
-    private def config : Config
-      @config || ConfigBuilder.default
-    end
-  end
-end

src/spectator/spec_node.cr

@@ -1,69 +0,0 @@
-require "./label"
-require "./source"
-
-module Spectator
-  # A single item in a test spec.
-  # This is commonly an `Example` or `ExampleGroup`,
-  # but can be anything that should be iterated over when running the spec.
-  abstract class SpecNode
-    # Location of the node in source code.
-    getter! source : Source
-
-    # User-provided name or description of the node.
-    # This does not include the group name or descriptions.
-    # Use `#to_s` to get the full name.
-    #
-    # This value will be nil if no name was provided.
-    # In this case, and the node is a runnable example,
-    # the name should be set to the description
-    # of the first matcher that runs in the test case.
-    #
-    # If this value is a `Symbol`, the user specified a type for the name.
-    getter! name : Label
-
-    # Updates the name of the node.
-    protected def name=(@name : String)
-    end
-
-    # Group the node belongs to.
-    getter! group : ExampleGroup
-
-    # Assigns the node to the specified *group*.
-    # This is an internal method and should only be called from `ExampleGroup`.
-    # `ExampleGroup` manages the association of nodes to groups.
-    protected setter group : ExampleGroup?
-
-    # Creates the node.
-    # The *name* describes the purpose of the node.
-    # It can be a `Symbol` to describe a type.
-    # The *source* tracks where the node exists in source code.
-    # The node will be assigned to *group* if it is provided.
-    def initialize(@name : Label = nil, @source : Source? = nil, group : ExampleGroup? = nil)
-      # Ensure group is linked.
-      group << self if group
-    end
-
-    # Indicates whether the node has completed.
-    abstract def finished? : Bool
-
-    # Constructs the full name or description of the node.
-    # This prepends names of groups this node is part of.
-    def to_s(io)
-      name = @name
-
-      # Prefix with group's full name if the node belongs to a group.
-      if (group = @group)
-        group.to_s(io)
-
-        # Add padding between the node names
-        # only if the names don't appear to be symbolic.
-        # Skip blank group names (like the root group).
-        io << ' ' unless !group.name? || # ameba:disable Style/NegatedConditionsInUnless
-                         (group.name?.is_a?(Symbol) && name.is_a?(String) &&
-                         (name.starts_with?('#') || name.starts_with?('.')))
-      end
-
-      name.to_s(io)
-    end
-  end
-end