iv-org-mirror/litespeed-quic
1
0
Fork 0
mirror of https://gitea.invidious.io/iv-org/litespeed-quic.git synced 2024-08-15 00:53:43 +00:00
Code Issues Projects Releases Packages Wiki Activity
litespeed-quic/include/lsquic.h
George Wang 497ec21d16 Release 3.0.4
2022-01-11 11:17:44 -05:00

2107 lines
67 KiB
C
Raw Blame History

/* Copyright (c) 2017 - 2021 LiteSpeed Technologies Inc. See LICENSE. */
#ifndef __LSQUIC_H__
#define __LSQUIC_H__
/**
* @file
* public API for using liblsquic is defined in this file.
*
*/
#include <stdarg.h>
#include <lsquic_types.h>
#ifndef WIN32
#include <sys/uio.h>
#include <time.h>
#else
#include <vc_compat.h>
#endif
struct sockaddr;
#ifdef __cplusplus
extern "C" {
#endif
#define LSQUIC_MAJOR_VERSION 3
#define LSQUIC_MINOR_VERSION 0
#define LSQUIC_PATCH_VERSION 4
/**
* Engine flags:
*/
/** Server mode */
#define LSENG_SERVER (1 << 0)
/** Use HTTP behavior */
#define LSENG_HTTP (1 << 1)
#define LSENG_HTTP_SERVER (LSENG_SERVER|LSENG_HTTP)
/**
* This is a list of QUIC versions that we know of. List of supported
* versions is in LSQUIC_SUPPORTED_VERSIONS.
*/
enum lsquic_version
{
/**
* Q043. Support for processing PRIORITY frames. Since this library
* has supported PRIORITY frames from the beginning, this version is
* exactly the same as LSQVER_042.
*/
LSQVER_043,
/**
* Q046. Use IETF Draft-17 compatible packet headers.
*/
LSQVER_046,
/**
* Q050. Variable-length QUIC server connection IDs. Use CRYPTO frames
* for handshake. IETF header format matching invariants-06. Packet
* number encryption. Initial packets are obfuscated.
*/
LSQVER_050,
/**
* IETF QUIC Draft-27
*/
LSQVER_ID27,
/**
* IETF QUIC Draft-29
*/
LSQVER_ID29,
/**
* IETF QUIC v1.
*/
LSQVER_I001,
/**
* Special version to trigger version negotiation.
* [draft-ietf-quic-transport-11], Section 3.
*/
LSQVER_VERNEG,
N_LSQVER
};
/**
* We currently support versions 43, 46, 50, Draft-27, Draft-29,
* and IETF QUIC v1.
* @see lsquic_version
*/
#define LSQUIC_SUPPORTED_VERSIONS ((1 << N_LSQVER) - 1)
/**
* List of versions in which the server never includes CID in short packets.
*/
#define LSQUIC_FORCED_TCID0_VERSIONS ((1 << LSQVER_046)|(1 << LSQVER_050))
#define LSQUIC_EXPERIMENTAL_VERSIONS ( \
(1 << LSQVER_VERNEG))
#define LSQUIC_DEPRECATED_VERSIONS ((1 << LSQVER_ID27))
#define LSQUIC_GQUIC_HEADER_VERSIONS (1 << LSQVER_043)
#define LSQUIC_IETF_VERSIONS ((1 << LSQVER_ID27) \
| (1 << LSQVER_ID29) \
| (1 << LSQVER_I001) | (1 << LSQVER_VERNEG))
#define LSQUIC_IETF_DRAFT_VERSIONS ((1 << LSQVER_ID27) \
| (1 << LSQVER_ID29) \
| (1 << LSQVER_VERNEG))
enum lsquic_hsk_status
{
/**
* The handshake failed.
*/
LSQ_HSK_FAIL,
/**
* The handshake succeeded without session resumption.
*/
LSQ_HSK_OK,
/**
* The handshake succeeded with session resumption.
*/
LSQ_HSK_RESUMED_OK,
/**
* Session resumption failed. Retry the connection without session
* resumption.
*/
LSQ_HSK_RESUMED_FAIL,
};
/**
* @struct lsquic_stream_if
* @brief The definitions of callback functions called by lsquic_stream to
* process events.
*
*/
struct lsquic_stream_if {
/**
* Use @ref lsquic_conn_get_ctx to get back the context. It is
* OK for this function to return NULL.
*/
lsquic_conn_ctx_t *(*on_new_conn)(void *stream_if_ctx,
lsquic_conn_t *c);
/** This is called when our side received GOAWAY frame. After this,
* new streams should not be created. The callback is optional.
*/
void (*on_goaway_received)(lsquic_conn_t *c);
void (*on_conn_closed)(lsquic_conn_t *c);
/** If you need to initiate a connection, call lsquic_conn_make_stream().
* This will cause `on_new_stream' callback to be called when appropriate
* (this operation is delayed when maximum number of outgoing streams is
* reached).
*
* After `on_close' is called, the stream is no longer accessible.
*/
lsquic_stream_ctx_t *
(*on_new_stream)(void *stream_if_ctx, lsquic_stream_t *s);
void (*on_read) (lsquic_stream_t *s, lsquic_stream_ctx_t *h);
void (*on_write) (lsquic_stream_t *s, lsquic_stream_ctx_t *h);
void (*on_close) (lsquic_stream_t *s, lsquic_stream_ctx_t *h);
/* Called when datagram is ready to be written */
ssize_t (*on_dg_write)(lsquic_conn_t *c, void *, size_t);
/* Called when datagram is read from a packet. This callback is required
* when es_datagrams is true. Take care to process it quickly, as this
* is called during lsquic_engine_packet_in().
*/
void (*on_datagram)(lsquic_conn_t *, const void *buf, size_t);
/* This callback in only called in client mode */
/**
* When handshake is completed, this optional callback is called.
*/
void (*on_hsk_done)(lsquic_conn_t *c, enum lsquic_hsk_status s);
/**
* When client receives a token in NEW_TOKEN frame, this callback is called.
* The callback is optional.
*/
void (*on_new_token)(lsquic_conn_t *c, const unsigned char *token,
size_t token_size);
/**
* This optional callback lets client record information needed to
* perform a session resumption next time around.
*
* For IETF QUIC, this is called only if ea_get_ssl_ctx() is *not* set,
* in which case the library creates its own SSL_CTX.
*
* Note: this callback will be deprecated when gQUIC support is removed.
*/
void (*on_sess_resume_info)(lsquic_conn_t *c, const unsigned char *, size_t);
/**
* Optional callback is called as soon as the peer resets a stream.
* The argument `how' is either 0, 1, or 2, meaning "read", "write", and
* "read and write", respectively (just like in shutdown(2)). This
* signals the user to stop reading, writing, or both.
*
* Note that resets differ in gQUIC and IETF QUIC. In gQUIC, `how' is
* always 2; in IETF QUIC, `how' is either 0 or 1 because one can reset
* just one direction in IETF QUIC.
*/
void (*on_reset) (lsquic_stream_t *s, lsquic_stream_ctx_t *h, int how);
/**
* Optional callback is called when a CONNECTION_CLOSE frame is received.
* This allows the application to log low-level diagnostic information about
* errors received with the CONNECTION_CLOSE frame. If app_error is -1 then
* it is considered unknown if this is an app_error or not.
*/
void (*on_conncloseframe_received)(lsquic_conn_t *c,
int app_error, uint64_t error_code,
const char *reason, int reason_len);
};
struct ssl_ctx_st;
struct ssl_st;
struct ssl_session_st;
struct lsxpack_header;
/**
* QUIC engine in server mode needs access to certificates. This is
* accomplished by providing a callback and a context to the engine
* constructor.
*/
/* `sni' may be NULL if engine is not HTTP mode and client TLS transport
* parameters did not include the SNI.
*/
typedef struct ssl_ctx_st * (*lsquic_lookup_cert_f)(
void *lsquic_cert_lookup_ctx, const struct sockaddr *local, const char *sni);
/**
* Minimum flow control window is set to 16 KB for both client and server.
* This means we can send up to this amount of data before handshake gets
* completed.
*/
#define LSQUIC_MIN_FCW (16 * 1024)
/* Each LSQUIC_DF_* value corresponds to es_* entry in
* lsquic_engine_settings below.
*/
/**
* By default, deprecated and experimental versions are not included.
*/
#define LSQUIC_DF_VERSIONS (LSQUIC_SUPPORTED_VERSIONS & \
~LSQUIC_DEPRECATED_VERSIONS & \
~LSQUIC_EXPERIMENTAL_VERSIONS)
#define LSQUIC_DF_CFCW_SERVER (3 * 1024 * 1024 / 2)
#define LSQUIC_DF_CFCW_CLIENT (15 * 1024 * 1024)
#define LSQUIC_DF_SFCW_SERVER (1 * 1024 * 1024)
#define LSQUIC_DF_SFCW_CLIENT (6 * 1024 * 1024)
#define LSQUIC_DF_MAX_STREAMS_IN 100
/* IQUIC uses different names for these: */
#define LSQUIC_DF_INIT_MAX_DATA_SERVER LSQUIC_DF_CFCW_SERVER
#define LSQUIC_DF_INIT_MAX_DATA_CLIENT LSQUIC_DF_CFCW_CLIENT
#define LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_REMOTE_SERVER LSQUIC_DF_SFCW_SERVER
#define LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_LOCAL_SERVER 0
#define LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_REMOTE_CLIENT 0
#define LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_LOCAL_CLIENT LSQUIC_DF_SFCW_CLIENT
#define LSQUIC_DF_INIT_MAX_STREAMS_BIDI LSQUIC_DF_MAX_STREAMS_IN
#define LSQUIC_DF_INIT_MAX_STREAMS_UNI_CLIENT 100
#define LSQUIC_DF_INIT_MAX_STREAMS_UNI_SERVER 3
/* XXX What's a good value here? */
#define LSQUIC_DF_INIT_MAX_STREAM_DATA_UNI_CLIENT (32 * 1024)
#define LSQUIC_DF_INIT_MAX_STREAM_DATA_UNI_SERVER (12 * 1024)
/**
* Default idle connection time in seconds.
*/
#define LSQUIC_DF_IDLE_TIMEOUT 30
/**
* Default ping period in seconds.
*/
#define LSQUIC_DF_PING_PERIOD 15
/**
* Default handshake timeout in microseconds.
*/
#define LSQUIC_DF_HANDSHAKE_TO (10 * 1000 * 1000)
#define LSQUIC_DF_IDLE_CONN_TO (LSQUIC_DF_IDLE_TIMEOUT * 1000 * 1000)
#define LSQUIC_DF_SILENT_CLOSE 1
/** Default value of maximum header list size. If set to non-zero value,
* SETTINGS_MAX_HEADER_LIST_SIZE will be sent to peer after handshake is
* completed (assuming the peer supports this setting frame type).
*/
#define LSQUIC_DF_MAX_HEADER_LIST_SIZE 0
/** Default value of UAID (user-agent ID). */
#define LSQUIC_DF_UA "LSQUIC"
#define LSQUIC_DF_STTL 86400
#define LSQUIC_DF_MAX_INCHOATE (1 * 1000 * 1000)
/** Do not use NSTP by default */
#define LSQUIC_DF_SUPPORT_NSTP 0
/** TODO: IETF QUIC clients do not support push */
#define LSQUIC_DF_SUPPORT_PUSH 1
#define LSQUIC_DF_SUPPORT_TCID0 1
/** By default, LSQUIC ignores Public Reset packets. */
#define LSQUIC_DF_HONOR_PRST 0
/**
* By default, LSQUIC will not send Public Reset packets in response to
* packets that specify unknown connections.
*/
#define LSQUIC_DF_SEND_PRST 0
/** By default, infinite loop checks are turned on */
#define LSQUIC_DF_PROGRESS_CHECK 1000
/** By default, read/write events are dispatched in a loop */
#define LSQUIC_DF_RW_ONCE 0
/** By default, the threshold is not enabled */
#define LSQUIC_DF_PROC_TIME_THRESH 0
/** By default, packets are paced */
#define LSQUIC_DF_PACE_PACKETS 1
/** Default clock granularity is 1000 microseconds */
#define LSQUIC_DF_CLOCK_GRANULARITY 1000
/** The default value is 8 for simplicity */
#define LSQUIC_DF_SCID_LEN 8
/** The default value is 60 CIDs per minute */
#define LSQUIC_DF_SCID_ISS_RATE 60
#define LSQUIC_DF_QPACK_DEC_MAX_BLOCKED 100
#define LSQUIC_DF_QPACK_DEC_MAX_SIZE 4096
#define LSQUIC_DF_QPACK_ENC_MAX_BLOCKED 100
#define LSQUIC_DF_QPACK_ENC_MAX_SIZE 4096
/* By default, QPACK experiments are turned off */
#define LSQUIC_DF_QPACK_EXPERIMENT 0
/** ECN is disabled by default */
#define LSQUIC_DF_ECN 0
/** Allow migration by default */
#define LSQUIC_DF_ALLOW_MIGRATION 1
/** Use QL loss bits by default */
#define LSQUIC_DF_QL_BITS 2
/** Turn spin bit on by default */
#define LSQUIC_DF_SPIN 1
/** Turn on delayed ACKs extension by default */
#define LSQUIC_DF_DELAYED_ACKS 1
/**
* Defaults for the Packet Tolerance PID Controller (PTPC) used by the
* Delayed ACKs extension:
*/
#define LSQUIC_DF_PTPC_PERIODICITY 3
#define LSQUIC_DF_PTPC_MAX_PACKTOL 150
#define LSQUIC_DF_PTPC_DYN_TARGET 1
#define LSQUIC_DF_PTPC_TARGET 1.0
#define LSQUIC_DF_PTPC_PROP_GAIN 0.8
#define LSQUIC_DF_PTPC_INT_GAIN 0.35
#define LSQUIC_DF_PTPC_ERR_THRESH 0.05
#define LSQUIC_DF_PTPC_ERR_DIVISOR 0.05
/** Turn on timestamp extension by default */
#define LSQUIC_DF_TIMESTAMPS 1
/* Use Adaptive CC by default */
#define LSQUIC_DF_CC_ALGO 3
/* Default value of the CC RTT threshold is 1.5 ms */
#define LSQUIC_DF_CC_RTT_THRESH 1500
/** Turn off datagram extension by default */
#define LSQUIC_DF_DATAGRAMS 0
/** Assume optimistic NAT by default. */
#define LSQUIC_DF_OPTIMISTIC_NAT 1
/** Turn on Extensible HTTP Priorities by default. */
#define LSQUIC_DF_EXT_HTTP_PRIO 1
/** By default, incoming packet size is not limited. */
#define LSQUIC_DF_MAX_UDP_PAYLOAD_SIZE_RX 0
/**
* By default, greasing the QUIC bit is enabled (if peer sent
* the "grease_quic_bit" transport parameter).
*/
#define LSQUIC_DF_GREASE_QUIC_BIT 1
/** By default, DPLPMTUD is enabled */
#define LSQUIC_DF_DPLPMTUD 1
/** By default, this value is left up to the engine. */
#define LSQUIC_DF_BASE_PLPMTU 0
/** By default, this value is left up to the engine. */
#define LSQUIC_DF_MAX_PLPMTU 0
/** By default, drop no-progress connections after 60 seconds on the server */
#define LSQUIC_DF_NOPROGRESS_TIMEOUT_SERVER 60
/** By default, do not use no-progress timeout on the client */
#define LSQUIC_DF_NOPROGRESS_TIMEOUT_CLIENT 0
/** By default, we use the minimum timer of 1000 milliseconds */
#define LSQUIC_DF_MTU_PROBE_TIMER 1000
/** By default, calling on_close() is not delayed */
#define LSQUIC_DF_DELAY_ONCLOSE 0
/**
* By default, maximum batch size is not specified, leaving it up to the
* library.
*/
#define LSQUIC_DF_MAX_BATCH_SIZE 0
/** Transport parameter sanity checks are performed by default. */
#define LSQUIC_DF_CHECK_TP_SANITY 1
struct lsquic_engine_settings {
/**
* This is a bit mask wherein each bit corresponds to a value in
* enum lsquic_version. Client starts negotiating with the highest
* version and goes down. Server supports either of the versions
* specified here.
*
* This setting applies to both Google and IETF QUIC.
*
* @see lsquic_version
*/
unsigned es_versions;
/**
* Initial default CFCW.
*
* In server mode, per-connection values may be set lower than
* this if resources are scarce.
*
* Do not set es_cfcw and es_sfcw lower than @ref LSQUIC_MIN_FCW.
*
* @see es_max_cfcw
*/
unsigned es_cfcw;
/**
* Initial default SFCW.
*
* In server mode, per-connection values may be set lower than
* this if resources are scarce.
*
* Do not set es_cfcw and es_sfcw lower than @ref LSQUIC_MIN_FCW.
*
* @see es_max_sfcw
*/
unsigned es_sfcw;
/**
* This value is used to specify maximum allowed value CFCW is allowed
* to reach due to window auto-tuning. By default, this value is zero,
* which means that CFCW is not allowed to increase from its initial
* value.
*
* This setting is applicable to both gQUIC and IETF QUIC.
*
* @see es_cfcw, @see es_init_max_data.
*/
unsigned es_max_cfcw;
/**
* This value is used to specify the maximum value stream flow control
* window is allowed to reach due to auto-tuning. By default, this
* value is zero, meaning that auto-tuning is turned off.
*
* This setting is applicable to both gQUIC and IETF QUIC.
*
* @see es_sfcw, @see es_init_max_stream_data_bidi_remote,
* @see es_init_max_stream_data_bidi_local.
*/
unsigned es_max_sfcw;
/** MIDS */
unsigned es_max_streams_in;
/**
* Handshake timeout in microseconds.
*
* For client, this can be set to an arbitrary value (zero turns the
* timeout off).
*
* For server, this value is limited to about 16 seconds. Do not set
* it to zero.
*/
unsigned long es_handshake_to;
/** ICSL in microseconds; GQUIC only */
unsigned long es_idle_conn_to;
/**
* When true, CONNECTION_CLOSE is not sent when connection times out.
* The server will also not send a reply to client's CONNECTION_CLOSE.
*
* Corresponds to SCLS (silent close) gQUIC option.
*/
int es_silent_close;
/**
* This corresponds to SETTINGS_MAX_HEADER_LIST_SIZE
* (RFC 7540, Section 6.5.2). 0 means no limit. Defaults
* to @ref LSQUIC_DF_MAX_HEADER_LIST_SIZE.
*/
unsigned es_max_header_list_size;
/** UAID -- User-Agent ID. Defaults to @ref LSQUIC_DF_UA. */
const char *es_ua;
/**
* More parameters for server
*/
uint64_t es_sttl; /* SCFG TTL in seconds */
uint32_t es_pdmd; /* One fixed value X509 */
uint32_t es_aead; /* One fixed value AESG */
uint32_t es_kexs; /* One fixed value C255 */
/* Maximum number of incoming connections in inchoate state. This is
* only applicable in server mode.
*/
unsigned es_max_inchoate;
/**
* Setting this value to 0 means that
*
* For client:
* a) we send a SETTINGS frame to indicate that we do not support server
* push; and
* b) All incoming pushed streams get reset immediately.
* (For maximum effect, set es_max_streams_in to 0.)
*
* For server:
* lsquic_conn_push_stream() will return -1.
*/
int es_support_push;
/**
* If set to true value, the server will not include connection ID in
* outgoing packets if client's CHLO specifies TCID=0.
*
* For client, this means including TCID=0 into CHLO message. Note that
* in this case, the engine tracks connections by the
* (source-addr, dest-addr) tuple, thereby making it necessary to create
* a socket for each connection.
*
* This option has no effect in Q046 and Q050, as the server never includes
* CIDs in the short packets.
*
* This setting is applicable to gQUIC only.
*
* The default is @ref LSQUIC_DF_SUPPORT_TCID0.
*/
int es_support_tcid0;
/**
* Q037 and higher support "No STOP_WAITING frame" mode. When set, the
* client will send NSTP option in its Client Hello message and will not
* sent STOP_WAITING frames, while ignoring incoming STOP_WAITING frames,
* if any. Note that if the version negotiation happens to downgrade the
* client below Q037, this mode will *not* be used.
*
* This option does not affect the server, as it must support NSTP mode
* if it was specified by the client.
*
* This setting is applicable to gQUIC only.
*/
int es_support_nstp;
/**
* If set to true value, the library will drop connections when it
* receives corresponding Public Reset packet. The default is to
* ignore these packets.
*
* The default is @ref LSQUIC_DF_HONOR_PRST.
*/
int es_honor_prst;
/**
* If set to true value, the library will send Public Reset packets
* in response to incoming packets with unknown Connection IDs.
* The default is @ref LSQUIC_DF_SEND_PRST.
*/
int es_send_prst;
/**
* A non-zero value enables internal checks that identify suspected
* infinite loops in user @ref on_read and @ref on_write callbacks
* and break them. An infinite loop may occur if user code keeps
* on performing the same operation without checking status, e.g.
* reading from a closed stream etc.
*
* The value of this parameter is as follows: should a callback return
* this number of times in a row without making progress (that is,
* reading, writing, or changing stream state), loop break will occur.
*
* The defaut value is @ref LSQUIC_DF_PROGRESS_CHECK.
*/
unsigned es_progress_check;
/**
* A non-zero value make stream dispatch its read-write events once
* per call.
*
* When zero, read and write events are dispatched until the stream
* is no longer readable or writeable, respectively, or until the
* user signals unwillingness to read or write using
* @ref lsquic_stream_wantread() or @ref lsquic_stream_wantwrite()
* or shuts down the stream.
*
* This also applies to the on_dg_write() callback.
*
* The default value is @ref LSQUIC_DF_RW_ONCE.
*/
int es_rw_once;
/**
* If set, this value specifies the number of microseconds that
* @ref lsquic_engine_process_conns() and
* @ref lsquic_engine_send_unsent_packets() are allowed to spend
* before returning.
*
* This is not an exact science and the connections must make
* progress, so the deadline is checked after all connections get
* a chance to tick (in the case of @ref lsquic_engine_process_conns())
* and at least one batch of packets is sent out.
*
* When processing function runs out of its time slice, immediate
* calls to @ref lsquic_engine_has_unsent_packets() return false.
*
* The default value is @ref LSQUIC_DF_PROC_TIME_THRESH.
*/
unsigned es_proc_time_thresh;
/**
* If set to true, packet pacing is implemented per connection.
*
* The default value is @ref LSQUIC_DF_PACE_PACKETS.
*/
int es_pace_packets;
/**
* Clock granularity information is used by the pacer. The value
* is in microseconds; default is @ref LSQUIC_DF_CLOCK_GRANULARITY.
*/
unsigned es_clock_granularity;
/**
* Congestion control algorithm to use.
*
* 0: Use default (@ref LSQUIC_DF_CC_ALGO)
* 1: Cubic
* 2: BBRv1
* 3: Adaptive (Cubic or BBRv1)
*/
unsigned es_cc_algo;
/**
* Congestion controller RTT threshold in microseconds.
*
* Adaptive congestion control uses BBRv1 until RTT is determined. At
* that point a permanent choice of congestion controller is made. If
* RTT is smaller than or equal to es_cc_rtt_thresh, congestion
* controller is switched to Cubic; otherwise, BBRv1 is picked.
*
* The default value is @ref LSQUIC_DF_CC_RTT_THRESH.
*/
unsigned es_cc_rtt_thresh;
/**
* No progress timeout.
*
* If connection does not make progress for this number of seconds, the
* connection is dropped. Here, progress is defined as user streams
* being written to or read from.
*
* If this value is zero, this timeout is disabled.
*
* Default value is @ref LSQUIC_DF_NOPROGRESS_TIMEOUT_SERVER in server
* mode and @ref LSQUIC_DF_NOPROGRESS_TIMEOUT_CLIENT in client mode.
*/
unsigned es_noprogress_timeout;
/* The following settings are specific to IETF QUIC. */
/* vvvvvvvvvvv */
/**
* Initial max data.
*
* This is a transport parameter.
*
* Depending on the engine mode, the default value is either
* @ref LSQUIC_DF_INIT_MAX_DATA_CLIENT or
* @ref LSQUIC_DF_INIT_MAX_DATA_SERVER.
*/
unsigned es_init_max_data;
/**
* Initial maximum amount of stream data allowed to be sent on streams
* created by remote end (peer).
*
* This is a transport parameter.
*
* Depending on the engine mode, the default value is either
* @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_REMOTE_CLIENT or
* @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_REMOTE_SERVER.
*/
unsigned es_init_max_stream_data_bidi_remote;
/**
* Initial maximum amount of stream data allowed to be sent on streams
* created by remote end (peer).
*
* This is a transport parameter.
*
* Depending on the engine mode, the default value is either
* @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_LOCAL_CLIENT or
* @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_LOCAL_SERVER.
*/
unsigned es_init_max_stream_data_bidi_local;
/**
* Initial max stream data for unidirectional streams initiated
* by remote endpoint.
*
* This is a transport parameter.
*
* Depending on the engine mode, the default value is either
* @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_UNI_CLIENT or
* @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_UNI_SERVER.
*/
unsigned es_init_max_stream_data_uni;
/**
* Maximum initial number of bidirectional stream.
*
* This is a transport parameter.
*
* Default value is @ref LSQUIC_DF_INIT_MAX_STREAMS_BIDI.
*/
unsigned es_init_max_streams_bidi;
/**
* Maximum initial number of unidirectional stream.
*
* This is a transport parameter.
*
* Default value is @ref LSQUIC_DF_INIT_MAX_STREAMS_UNI_CLIENT or
* @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_UNI_SERVER.
*/
unsigned es_init_max_streams_uni;
/**
* Idle connection timeout.
*
* This is a transport parameter.
*
* (Note: es_idle_conn_to is not reused because it is in microseconds,
* which, I now realize, was not a good choice. Since it will be
* obsoleted some time after the switchover to IETF QUIC, we do not
* have to keep on using strange units.)
*
* Default value is @ref LSQUIC_DF_IDLE_TIMEOUT.
*
* Maximum value is 600 seconds.
*/
unsigned es_idle_timeout;
/**
* Ping period. If set to non-zero value, the connection will generate and
* send PING frames in the absence of other activity.
*
* By default, the server does not send PINGs and the period is set to zero.
* The client's defaut value is @ref LSQUIC_DF_PING_PERIOD.
*/
unsigned es_ping_period;
/**
* Source Connection ID length. Only applicable to the IETF QUIC
* versions. Valid values are 0 through 20, inclusive.
*
* Default value is @ref LSQUIC_DF_SCID_LEN.
*/
unsigned es_scid_len;
/**
* Source Connection ID issuance rate. Only applicable to the IETF QUIC
* versions. This field is measured in CIDs per minute. Using value 0
* indicates that there is no rate limit for CID issuance.
*
* Default value is @ref LSQUIC_DF_SCID_ISS_RATE.
*/
unsigned es_scid_iss_rate;
/**
* Maximum size of the QPACK dynamic table that the QPACK decoder will
* use.
*
* The default is @ref LSQUIC_DF_QPACK_DEC_MAX_SIZE.
*/
unsigned es_qpack_dec_max_size;
/**
* Maximum number of blocked streams that the QPACK decoder is willing
* to tolerate.
*
* The default is @ref LSQUIC_DF_QPACK_DEC_MAX_BLOCKED.
*/
unsigned es_qpack_dec_max_blocked;
/**
* Maximum size of the dynamic table that the encoder is willing to use.
* The actual size of the dynamic table will not exceed the minimum of
* this value and the value advertized by peer.
*
* The default is @ref LSQUIC_DF_QPACK_ENC_MAX_SIZE.
*/
unsigned es_qpack_enc_max_size;
/**
* Maximum number of blocked streams that the QPACK encoder is willing
* to risk. The actual number of blocked streams will not exceed the
* minimum of this value and the value advertized by peer.
*
* The default is @ref LSQUIC_DF_QPACK_ENC_MAX_BLOCKED.
*/
unsigned es_qpack_enc_max_blocked;
/**
* Enable ECN support.
*
* The default is @ref LSQUIC_DF_ECN
*/
int es_ecn;
/**
* Allow peer to migrate connection.
*
* The default is @ref LSQUIC_DF_ALLOW_MIGRATION
*/
int es_allow_migration;
/**
* Use QL loss bits. Allowed values are:
* 0: Do not use loss bits
* 1: Allow loss bits
* 2: Allow and send loss bits
*
* Default value is @ref LSQUIC_DF_QL_BITS
*/
int es_ql_bits;
/**
* Enable spin bit. Allowed values are 0 and 1.
*
* Default value is @ref LSQUIC_DF_SPIN
*/
int es_spin;
/**
* Enable delayed ACKs extension. Allowed values are 0 and 1.
*
* Default value is @ref LSQUIC_DF_DELAYED_ACKS
*/
int es_delayed_acks;
/**
* Enable timestamps extension. Allowed values are 0 and 1.
*
* Default value is @ref LSQUIC_DF_TIMESTAMPS
*/
int es_timestamps;
/**
* Maximum packet size we are willing to receive. This is sent to
* peer in transport parameters: the library does not enforce this
* limit for incoming packets.
*
* If set to zero, limit is not set.
*
* Default value is @ref LSQUIC_DF_MAX_UDP_PAYLOAD_SIZE_RX
*/
unsigned short es_max_udp_payload_size_rx;
/**
* Enable the "QUIC bit grease" extension. When set to a true value,
* lsquic will grease the QUIC bit on the outgoing QUIC packets if
* the peer sent the "grease_quic_bit" transport parameter.
*
* Default value is @ref LSQUIC_DF_GREASE_QUIC_BIT
*/
int es_grease_quic_bit;
/**
* If set to true value, enable DPLPMTUD -- Datagram Packetization
* Layer Path MTU Discovery.
*
* Default value is @ref LSQUIC_DF_DPLPMTUD
*/
int es_dplpmtud;
/**
* PLPMTU size expected to work for most paths.
*
* If set to zero, this value is calculated based on QUIC and IP versions.
*
* Default value is @ref LSQUIC_DF_BASE_PLPMTU.
*/
unsigned short es_base_plpmtu;
/**
* Largest PLPMTU size the engine will try.
*
* If set to zero, picking this value is left to the engine.
*
* Default value is @ref LSQUIC_DF_MAX_PLPMTU.
*/
unsigned short es_max_plpmtu;
/**
* This value specifies how long the DPLPMTUD probe timer is, in
* milliseconds. [draft-ietf-tsvwg-datagram-plpmtud-17] says:
*
" PROBE_TIMER: The PROBE_TIMER is configured to expire after a period
" longer than the maximum time to receive an acknowledgment to a
" probe packet. This value MUST NOT be smaller than 1 second, and
" SHOULD be larger than 15 seconds. Guidance on selection of the
" timer value are provided in section 3.1.1 of the UDP Usage
" Guidelines [RFC8085].
*
* If set to zero, the default is used.
*
* Default value is @ref LSQUIC_DF_MTU_PROBE_TIMER.
*/
unsigned es_mtu_probe_timer;
/**
* Enable datagram extension. Allowed values are 0 and 1.
*
* Default value is @ref LSQUIC_DF_DATAGRAMS
*/
int es_datagrams;
/**
* If set to true, changes in peer port are assumed to be due to a
* benign NAT rebinding and path characteristics -- MTU, RTT, and
* CC state -- are not reset.
*
* Default value is @ref LSQUIC_DF_OPTIMISTIC_NAT.
*/
int es_optimistic_nat;
/**
* If set to true, Extensible HTTP Priorities are enabled. This
* is HTTP/3-only setting.
*
* Default value is @ref LSQUIC_DF_EXT_HTTP_PRIO
*/
int es_ext_http_prio;
/**
* If set to 1, QPACK statistics are logged per connection.
*
* If set to 2, QPACK experiments are run. In this mode, encoder
* and decoder setting values are randomly selected (from the range
* [0, whatever is specified in es_qpack_(enc|dec)_*]) and these
* values along with compression ratio and user agent are logged at
* NOTICE level when connection is destroyed. The purpose of these
* experiments is to use compression performance statistics to figure
* out a good set of default values.
*
* Default value is @ref LSQUIC_DF_QPACK_EXPERIMENT.
*/
int es_qpack_experiment;
/**
* Settings for the Packet Tolerance PID Controller (PTPC) used for
* the Delayed ACKs logic. Periodicity is how often the number of
* incoming ACKs is sampled. Periodicity's units is the number of
* RTTs. Target is the average number of incoming ACKs per RTT we
* want to achieve. Error threshold defines the range of error values
* within which no action is taken. For example, error threshold of
* 0.03 means that adjustment actions will be taken only when the
* error is outside of the [-0.03, 0.03] range. Proportional and
* integral gains have their usual meanings described here:
* https://en.wikipedia.org/wiki/PID_controller#Controller_theory
*
* The average is normalized as follows:
* AvgNormalized = Avg * e / Target # Where 'e' is 2.71828...
*
* The error is then calculated as ln(AvgNormalized) - 1. This gives
* us a logarithmic scale that is convenient to use for adjustment
* calculations. The error divisor is used to calculate the packet
* tolerance adjustment:
* Adjustment = Error / ErrorDivisor
*
* WARNING. The library comes with sane defaults. Only fiddle with
* these knobs if you know what you are doing.
*/
unsigned es_ptpc_periodicity; /* LSQUIC_DF_PTPC_PERIODICITY */
unsigned es_ptpc_max_packtol; /* LSQUIC_DF_PTPC_MAX_PACKTOL */
int es_ptpc_dyn_target; /* LSQUIC_DF_PTPC_DYN_TARGET */
float es_ptpc_target, /* LSQUIC_DF_PTPC_TARGET */
es_ptpc_prop_gain, /* LSQUIC_DF_PTPC_PROP_GAIN */
es_ptpc_int_gain, /* LSQUIC_DF_PTPC_INT_GAIN */
es_ptpc_err_thresh, /* LSQUIC_DF_PTPC_ERR_THRESH */
es_ptpc_err_divisor; /* LSQUIC_DF_PTPC_ERR_DIVISOR */
/**
* When set to true, the on_close() callback will be delayed until the
* peer acknowledges all data sent on the stream. (Or until the connection
* is destroyed in some manner -- either explicitly closed by the user or
* as a result of an engine shutdown.)
*
* Default value is @ref LSQUIC_DF_DELAY_ONCLOSE
*/
int es_delay_onclose;
/**
* If set to a non-zero value, specified maximum batch size. (The
* batch of packets passed to @ref ea_packets_out() callback). Must
* be no larger than 1024.
*
* Default value is @ref LSQUIC_DF_MAX_BATCH_SIZE
*/
unsigned es_max_batch_size;
/**
* When true, sanity checks are performed on peer's transport parameter
* values. If some limits are set suspiciously low, the connection won't
* be established.
*
* Default value is @ref LSQUIC_DF_CHECK_TP_SANITY
*/
int es_check_tp_sanity;
};
/* Initialize `settings' to default values */
void
lsquic_engine_init_settings (struct lsquic_engine_settings *,
unsigned lsquic_engine_flags);
/**
* Check settings for errors.
*
* @param settings Settings struct.
*
* @param flags Engine flags.
*
* @param err_buf Optional pointer to buffer into which error string
* is written.
* @param err_buf_sz Size of err_buf. No more than this number of bytes
* will be written to err_buf, including the NUL byte.
*
* @retval 0 Settings have no errors.
* @retval -1 There are errors in settings.
*/
int
lsquic_engine_check_settings (const struct lsquic_engine_settings *settings,
unsigned lsquic_engine_flags,
char *err_buf, size_t err_buf_sz);
struct lsquic_out_spec
{
struct iovec *iov;
size_t iovlen;
const struct sockaddr *local_sa;
const struct sockaddr *dest_sa;
void *peer_ctx;
lsquic_conn_ctx_t *conn_ctx; /* will be NULL when sending out the first batch of handshake packets */
int ecn; /* Valid values are 0 - 3. See RFC 3168 */
};
/**
* Returns number of packets successfully sent out or -1 on error. -1 should
* only be returned if no packets were sent out. If -1 is returned or if the
* return value is smaller than `n_packets_out', this indicates that sending
* of packets is not possible.
*
* If not all packets could be sent out, errno is examined. If it is not
* EAGAIN or EWOULDBLOCK, the connection whose packet cause the error is
* closed forthwith.
*
* No packets will be attempted to be sent out until
* @ref lsquic_engine_send_unsent_packets() is called.
*/
typedef int (*lsquic_packets_out_f)(
void *packets_out_ctx,
const struct lsquic_out_spec *out_spec,
unsigned n_packets_out
);
/**
* The shared hash interface is used to share data between multiple LSQUIC
* instances.
*/
struct lsquic_shared_hash_if
{
/**
* If you want your item to never expire, set `expiry' to zero.
* Returns 0 on success, -1 on failure.
*
* If inserted successfully, `free()' will be called on `data' and 'key'
* pointer when the element is deleted, whether due to expiration
* or explicit deletion.
*/
int (*shi_insert)(void *shi_ctx, void *key, unsigned key_sz,
void *data, unsigned data_sz, time_t expiry);
/**
* Returns 0 on success, -1 on failure.
*/
int (*shi_delete)(void *shi_ctx, const void *key, unsigned key_sz);
/**
* `data' is pointed to the result and `data_sz' is set to the
* object size. The implementation may choose to copy the object
* into buffer pointed to by `data', so you should have it ready.
*
* @retval 1 found.
* @retval 0 not found.
* @retval -1 error (perhaps not enough room in `data' if copy was
* attempted).
*/
int (*shi_lookup)(void *shi_ctx, const void *key, unsigned key_sz,
void **data, unsigned *data_sz);
};
/**
* The packet out memory interface is used by LSQUIC to get buffers to
* which outgoing packets will be written before they are passed to
* ea_packets_out callback.
*
* If not specified, malloc() and free() are used.
*/
struct lsquic_packout_mem_if
{
/**
* Allocate buffer for sending.
*/
void * (*pmi_allocate) (void *pmi_ctx, void *peer_ctx, lsquic_conn_ctx_t *, unsigned short sz,
char is_ipv6);
/**
* This function is used to release the allocated buffer after it is
* sent via @ref ea_packets_out.
*/
void (*pmi_release) (void *pmi_ctx, void *peer_ctx, void *buf,
char is_ipv6);
/**
* If allocated buffer is not going to be sent, return it to the caller
* using this function.
*/
void (*pmi_return) (void *pmi_ctx, void *peer_ctx, void *buf,
char is_ipv6);
};
typedef void (*lsquic_cids_update_f)(void *ctx, void **peer_ctx,
const lsquic_cid_t *cids, unsigned n_cids);
struct stack_st_X509;
enum lsquic_hsi_flag {
/**
* Turn HTTP/1.x mode on or off. In this mode, decoded name and value
* pair are separated by ": " and "\r\n" is appended to the end of the
* string. By default, this mode is off.
*/
LSQUIC_HSI_HTTP1X = 1 << 1,
/** Include name hash into lsxpack_header */
LSQUIC_HSI_HASH_NAME = 1 << 2,
/** Include nameval hash into lsxpack_header */
LSQUIC_HSI_HASH_NAMEVAL = 1 << 3,
};
struct lsquic_hset_if
{
/**
* Create a new header set. This object is (and must be) fetched from a
* stream by calling @ref lsquic_stream_get_hset() before the stream can
* be read.
*
* `stream' may be set to NULL in server mode.
*/
void * (*hsi_create_header_set)(void *hsi_ctx, lsquic_stream_t *stream,
int is_push_promise);
/**
* Return a header set prepared for decoding. If `hdr' is NULL, this
* means return a new structure with at least `space' bytes available
* in the decoder buffer. On success, a newly prepared header is
* returned.
*
* If `hdr' is not NULL, it means there was not enough decoder buffer
* and it must be increased to at least `space' bytes. `buf', `val_len',
* and `name_offset' member of the `hdr' structure may change. On
* success, the return value is the same as `hdr'.
*
* If NULL is returned, the space cannot be allocated.
*/
struct lsxpack_header *
(*hsi_prepare_decode)(void *hdr_set,
struct lsxpack_header *hdr,
size_t space);
/**
* Process new header. Return 0 on success, a positive value if a header
* error occured, or a negative value on any other error.
*
* A positive return value will result in cancellation of associated
* stream.
*
* A negative return value will result in connection being aborted.
*
* `hdr_set' is the header set object returned by
* @ref hsi_create_header_set().
*
* `hdr' is the header returned by @ref `hsi_prepare_decode'.
*
* If `hdr' is NULL, this means that no more header are going to be
* added to the set.
*/
int (*hsi_process_header)(void *hdr_set, struct lsxpack_header *hdr);
/**
* Discard header set. This is called for unclaimed header sets and
* header sets that had an error.
*/
void (*hsi_discard_header_set)(void *hdr_set);
/**
* These flags specify properties of decoded headers passed to
* hsi_process_header(). This is only applicable to QPACK headers;
* HPACK library header properties are based on compilation, not
* run-time, options.
*/
enum lsquic_hsi_flag hsi_flags;
};
/**
* This struct contains a list of all callbacks that are used by the engine
* to communicate with the user code. Most of these are optional, while
* the following are mandatory:
*
* @ref ea_stream_if The stream interface.
* @ref ea_packets_out Function to send packets.
* @ref ea_lookup_cert Function to look up certificates by SNI (used
* in server mode).
*
* A pointer to this structure is passed to engine constructor
* @ref lsquic_engine_new().
*/
struct lsquic_engine_api
{
const struct lsquic_engine_settings *ea_settings; /* Optional */
/** Stream interface is required to manage connections and streams. */
const struct lsquic_stream_if *ea_stream_if;
void *ea_stream_if_ctx;
/** Function to send packets out is required. */
lsquic_packets_out_f ea_packets_out;
void *ea_packets_out_ctx;
/** Function to look up certificates by SNI is used in server mode. */
lsquic_lookup_cert_f ea_lookup_cert;
void *ea_cert_lu_ctx;
/** Mandatory callback for server, optional for client. */
struct ssl_ctx_st * (*ea_get_ssl_ctx)(void *peer_ctx,
const struct sockaddr *local);
/**
* Shared hash interface is optional. If set to zero, performance of
* multiple LSQUIC instances will be degraded.
*/
const struct lsquic_shared_hash_if *ea_shi;
void *ea_shi_ctx;
/**
* Memory interface is optional.
*/
const struct lsquic_packout_mem_if *ea_pmi;
void *ea_pmi_ctx;
/**
* Optional interface to report new and old source connection IDs.
*/
lsquic_cids_update_f ea_new_scids;
lsquic_cids_update_f ea_live_scids;
lsquic_cids_update_f ea_old_scids;
void *ea_cids_update_ctx;
/**
* Function to verify server certificate. The chain contains at least
* one element. The first element in the chain is the server
* certificate. The chain belongs to the library. If you want to
* retain it, call sk_X509_up_ref().
*
* 0 is returned on success, -1 on error.
*
* If the function pointer is not set, no verification is performed
* (the connection is allowed to proceed).
*/
int (*ea_verify_cert)(void *verify_ctx,
struct stack_st_X509 *chain);
void *ea_verify_ctx;
/**
* Optional header set interface. If not specified, the incoming headers
* are converted to HTTP/1.x format and are read from stream and have to
* be parsed again.
*/
const struct lsquic_hset_if *ea_hsi_if;
void *ea_hsi_ctx;
/**
* If set, engine will print cumulative connection statistics to this
* file just before it is destroyed. (Must be compiled with
* -DLSQUIC_CONN_STATS=1).
*/
void /* FILE, really */ *ea_stats_fh;
/**
* The optional ALPN string is used by the client if @ref LSENG_HTTP
* is not set.
*/
const char *ea_alpn;
/**
* Optional interface to control the creation of connection IDs
*/
void (*ea_generate_scid)(void *ctx,
lsquic_conn_t *, lsquic_cid_t *, unsigned);
/** Passed to ea_generate_scid() */
void *ea_gen_scid_ctx;
};
/**
* Create new engine.
*
* @param lsquic_engine_flags A bitmask of @ref LSENG_SERVER and
* @ref LSENG_HTTP
*
* @param api Required parameter that specifies
* various callbacks.
*
* The engine can be instantiated either in server mode (when LSENG_SERVER
* is set) or client mode. If you need both server and client in your
* program, create two engines (or as many as you'd like).
*/
lsquic_engine_t *
lsquic_engine_new (unsigned lsquic_engine_flags,
const struct lsquic_engine_api *api);
/**
* Create a client connection to peer identified by `peer_ctx'.
*
* To let the engine specify QUIC version, use N_LSQVER. If session resumption
* information is supplied, version is picked from there instead.
*
* If `base_plpmtu' is set to zero, it is selected based on the
* engine settings, QUIC version, and IP version.
*/
lsquic_conn_t *
lsquic_engine_connect (lsquic_engine_t *, enum lsquic_version,
const struct sockaddr *local_sa,
const struct sockaddr *peer_sa,
void *peer_ctx, lsquic_conn_ctx_t *conn_ctx,
const char *hostname, unsigned short base_plpmtu,
const unsigned char *sess_resume, size_t sess_resume_len,
/** Resumption token: optional */
const unsigned char *token, size_t token_sz);
/**
* Pass incoming packet to the QUIC engine. This function can be called
* more than once in a row. After you add one or more packets, call
* lsquic_engine_process_conns() to schedule output, if any.
*
* @retval 0 Packet was processed by a real connection.
*
* @retval 1 Packet was handled successfully, but not by a connection.
* This may happen with version negotiation and public reset
* packets as well as some packets that may be ignored.
*
* @retval -1 An error occurred. Possible reasons are failure to allocate
* memory and invalid @param sa_local in client mode.
*/
int
lsquic_engine_packet_in (lsquic_engine_t *,
const unsigned char *packet_in_data, size_t packet_in_size,
const struct sockaddr *sa_local, const struct sockaddr *sa_peer,
void *peer_ctx, int ecn);
/**
* Process tickable connections. This function must be called often enough so
* that packets and connections do not expire.
*/
void
lsquic_engine_process_conns (lsquic_engine_t *engine);
/**
* Returns true if engine has some unsent packets. This happens if
* @ref ea_packets_out() could not send everything out or if processing
* deadline was exceeded (see @ref es_proc_time_thresh).
*/
int
lsquic_engine_has_unsent_packets (lsquic_engine_t *engine);
/**
* Send out as many unsent packets as possibe: until we are out of unsent
* packets or until @ref ea_packets_out() fails.
*
* If @ref ea_packets_out() does fail cannot send all packets, this
* function must be called to signify that sending of packets is possible
* again.
*/
void
lsquic_engine_send_unsent_packets (lsquic_engine_t *engine);
/**
* Destroy engine and all connections and streams in it and free all
* memory associated with this engine.
*/
void
lsquic_engine_destroy (lsquic_engine_t *);
/** Return max allowed outbound streams less current outbound streams. */
unsigned
lsquic_conn_n_avail_streams (const lsquic_conn_t *);
/**
* Create a new request stream. This causes @ref on_new_stream() callback
* to be called. If creating more requests is not permitted at the moment
* (due to number of concurrent streams limit), stream creation is registered
* as "pending" and the stream is created later when number of streams dips
* under the limit again. Any number of pending streams can be created.
* Use @ref lsquic_conn_n_pending_streams() and
* @ref lsquic_conn_cancel_pending_streams() to manage pending streams.
*
* If connection is going away, @ref on_new_stream() is called with the
* stream parameter set to NULL.
*/
void
lsquic_conn_make_stream (lsquic_conn_t *);
/** Return number of delayed streams currently pending */
unsigned
lsquic_conn_n_pending_streams (const lsquic_conn_t *);
/** Cancel `n' pending streams. Returns new number of pending streams. */
unsigned
lsquic_conn_cancel_pending_streams (lsquic_conn_t *, unsigned n);
/**
* Mark connection as going away: send GOAWAY frame and do not accept
* any more incoming streams, nor generate streams of our own.
*
* Only applicable to HTTP/3 and GQUIC connections. Otherwise a no-op.
*/
void
lsquic_conn_going_away (lsquic_conn_t *);
/**
* This forces connection close. on_conn_closed and on_close callbacks
* will be called.
*/
void
lsquic_conn_close (lsquic_conn_t *);
/**
* Set whether you want to read from stream. If @param is_want is true,
* @ref on_read() will be called when there is readable data in the
* stream. If @param is false, @ref on_read() will not be called.
*
* Returns previous value of this flag.
*/
int
lsquic_stream_wantread (lsquic_stream_t *s, int is_want);
/**
* Read up to @param len bytes from stream into @param buf. Returns number
* of bytes read or -1 on error, in which case errno is set. Possible
* errno values:
*
* EBADF The stream is closed.
* ECONNRESET The stream has been reset.
* EWOULDBLOCK There is no data to be read.
*
* Return value of zero indicates EOF.
*/
ssize_t
lsquic_stream_read (lsquic_stream_t *s, void *buf, size_t len);
/**
* Similar to @ref lsquic_stream_read(), but reads data into @param vec.
*/
ssize_t
lsquic_stream_readv (lsquic_stream_t *s, const struct iovec *vec, int iovcnt);
/**
* This function allows user-supplied callback to read the stream contents.
* It is meant to be used for zero-copy stream processing.
*
* Return value and errors are same as in @ref lsquic_stream_read().
*/
ssize_t
lsquic_stream_readf (lsquic_stream_t *s,
/**
* The callback takes four parameters:
* - Pointer to user-supplied context;
* - Pointer to the data;
* - Data size (can be zero); and
* - Indicator whether the FIN follows the data.
*
* The callback returns number of bytes processed. If this number is zero
* or is smaller than `len', reading from stream stops.
*/
size_t (*readf)(void *ctx, const unsigned char *buf, size_t len, int fin),
void *ctx);
/**
* Set whether you want to write to stream. If @param is_want is true,
* @ref on_write() will be called when it is possible to write data to
* the stream. If @param is false, @ref on_write() will not be called.
*
* Returns previous value of this flag.
*/
int
lsquic_stream_wantwrite (lsquic_stream_t *s, int is_want);
/**
* Write `len' bytes to the stream. Returns number of bytes written, which
* may be smaller that `len'.
*
* A negative return value indicates a serious error (the library is likely
* to have aborted the connection because of it).
*/
ssize_t
lsquic_stream_write (lsquic_stream_t *s, const void *buf, size_t len);
/**
* Like @ref lsquic_stream_write(), but read data from @param vec.
*/
ssize_t
lsquic_stream_writev (lsquic_stream_t *s, const struct iovec *vec, int count);
/**
* Write to streams using a single call to a preadv-like function.
*/
ssize_t
lsquic_stream_pwritev (lsquic_stream_t *s,
ssize_t (*preadv)(void *user_data, const struct iovec *iov, int iovcnt),
void *user_data, size_t n_to_write);
/**
* Used as argument to @ref lsquic_stream_writef()
*/
struct lsquic_reader
{
/**
* Not a ssize_t because the read function is not supposed to return
* an error. If an error occurs in the read function (for example, when
* reading from a file fails), it is supposed to deal with the error
* itself.
*/
size_t (*lsqr_read) (void *lsqr_ctx, void *buf, size_t count);
/**
* Return number of bytes remaining in the reader.
*/
size_t (*lsqr_size) (void *lsqr_ctx);
void *lsqr_ctx;
};
/**
* Write to stream using @ref lsquic_reader. This is the most generic of
* the write functions -- @ref lsquic_stream_write() and
* @ref lsquic_stream_writev() utilize the same mechanism.
*
* @retval Number of bytes written or -1 on error.
*/
ssize_t
lsquic_stream_writef (lsquic_stream_t *, struct lsquic_reader *);
/**
* Flush any buffered data. This triggers packetizing even a single byte
* into a separate frame. Flushing a closed stream is an error.
*
* @retval 0 Success
* @retval -1 Failure
*/
int
lsquic_stream_flush (lsquic_stream_t *s);
/**
* @typedef lsquic_http_headers_t
* @brief HTTP header list structure. Contains a list of HTTP headers in key/value pairs.
* used in API functions to pass headers.
*/
struct lsquic_http_headers
{
int count;
struct lsxpack_header *headers;
};
/**
* Send headers in @param headers. This function must be called before
* writing to the stream. The value of @param eos is ignored in IETF QUIC.
*/
int
lsquic_stream_send_headers (lsquic_stream_t *s,
const lsquic_http_headers_t *headers, int eos);
/**
* Get header set associated with the stream. The header set is created by
* @ref hsi_create_header_set() callback. After this call, the ownership of
* the header set is transferred to the caller.
*
* This call must precede calls to @ref lsquic_stream_read() and
* @ref lsquic_stream_readv().
*
* If the optional header set interface (@ref ea_hsi_if) is not specified,
* this function returns NULL.
*/
void *
lsquic_stream_get_hset (lsquic_stream_t *);
/**
* A server may push a stream. This call creates a new stream in reference
* to stream `s'. It will behave as if the client made a request: it will
* trigger on_new_stream() event and it can be used as a regular client-
* initiated stream.
*
* `hdr_set' must be set. It is passed as-is to @lsquic_stream_get_hset.
*
* @retval 0 Stream pushed successfully.
* @retval 1 Stream push failed because it is disabled or because we hit
* stream limit or connection is going away.
* @retval -1 Stream push failed because of an internal error.
*/
int
lsquic_conn_push_stream (lsquic_conn_t *c, void *hdr_set, lsquic_stream_t *s,
const lsquic_http_headers_t *headers);
/**
* Only makes sense in server mode: the client cannot push a stream and this
* function always returns false in client mode.
*/
int
lsquic_conn_is_push_enabled (lsquic_conn_t *);
/** Possible values for how are 0, 1, and 2. See shutdown(2). */
int lsquic_stream_shutdown(lsquic_stream_t *s, int how);
int lsquic_stream_close(lsquic_stream_t *s);
/**
* Return true if peer has not ACKed all data written to the stream. This
* includes both packetized and buffered data.
*/
int
lsquic_stream_has_unacked_data (lsquic_stream_t *s);
/**
* Get certificate chain returned by the server. This can be used for
* server certificate verification.
*
* The caller releases the stack using sk_X509_free().
*/
struct stack_st_X509 *
lsquic_conn_get_server_cert_chain (lsquic_conn_t *);
/** Returns ID of the stream */
lsquic_stream_id_t
lsquic_stream_id (const lsquic_stream_t *s);
/**
* Returns stream ctx associated with the stream. (The context is what
* is returned by @ref on_new_stream callback).
*/
lsquic_stream_ctx_t *
lsquic_stream_get_ctx (const lsquic_stream_t *s);
/**
* Set user-supplied context associated with the stream.
*/
void
lsquic_stream_set_ctx (lsquic_stream_t *stream, lsquic_stream_ctx_t *ctx);
/** Returns true if this is a pushed stream */
int
lsquic_stream_is_pushed (const lsquic_stream_t *s);
/**
* Returns true if this stream was rejected, false otherwise. Use this as
* an aid to distinguish between errors.
*/
int
lsquic_stream_is_rejected (const lsquic_stream_t *s);
/**
* Refuse pushed stream. Call it from @ref on_new_stream.
*
* No need to call lsquic_stream_close() after this. on_close will be called.
*
* @see lsquic_stream_is_pushed
*/
int
lsquic_stream_refuse_push (lsquic_stream_t *s);
/**
* Get information associated with pushed stream:
*
* @param ref_stream_id Stream ID in response to which push promise was
* sent.
* @param hdr_set Header set. This object was passed to or generated
* by @ref lsquic_conn_push_stream().
*
* @retval 0 Success.
* @retval -1 This is not a pushed stream.
*/
int
lsquic_stream_push_info (const lsquic_stream_t *,
lsquic_stream_id_t *ref_stream_id, void **hdr_set);
/** Return current priority of the stream */
unsigned lsquic_stream_priority (const lsquic_stream_t *s);
/**
* Set stream priority. Valid priority values are 1 through 256, inclusive.
* Lower value means higher priority.
*
* @retval 0 Success.
* @retval -1 Priority value is invalid.
*/
int lsquic_stream_set_priority (lsquic_stream_t *s, unsigned priority);
/*
* Definitions for Extensible HTTP Priorities:
* https://tools.ietf.org/html/draft-ietf-httpbis-priority-01
*/
/* This is maximum *value* -- but it's the lowest *priority* */
#define LSQUIC_MAX_HTTP_URGENCY 7
#define LSQUIC_DEF_HTTP_URGENCY 3
#define LSQUIC_DEF_HTTP_INCREMENTAL 0
struct lsquic_ext_http_prio
{
unsigned char urgency;
signed char incremental;
};
/**
* Get Extensible HTTP Priorities associated with the stream.
*
* Returns zero on success of a negative value on failure. A failure occurs
* if this is not an HTTP/3 stream or if Extensible HTTP Priorities haven't
* been enabled. See @ref es_ext_http_prio.
*/
int
lsquic_stream_get_http_prio (lsquic_stream_t *, struct lsquic_ext_http_prio *);
/**
* Set Extensible HTTP Priorities of the stream.
*
* Returns zero on success of a negative value on failure. A failure occurs
* if some internal error occured or if this is not an HTTP/3 stream or if
* Extensible HTTP Priorities haven't been enabled. See @ref es_ext_http_prio.
*/
int
lsquic_stream_set_http_prio (lsquic_stream_t *,
const struct lsquic_ext_http_prio *);
/**
* Get a pointer to the connection object. Use it with lsquic_conn_*
* functions.
*/
lsquic_conn_t * lsquic_stream_conn(const lsquic_stream_t *s);
/** Get connection ID */
const lsquic_cid_t *
lsquic_conn_id (const lsquic_conn_t *c);
/** Get pointer to the engine */
lsquic_engine_t *
lsquic_conn_get_engine (lsquic_conn_t *c);
int
lsquic_conn_get_sockaddr(lsquic_conn_t *c,
const struct sockaddr **local, const struct sockaddr **peer);
/* Returns previous value */
int
lsquic_conn_want_datagram_write (lsquic_conn_t *, int is_want);
/* Get minimum datagram size. By default, this value is zero. */
size_t
lsquic_conn_get_min_datagram_size (lsquic_conn_t *);
/* Set minimum datagram size. This is the minumum value of the buffer passed
* to the on_dg_write() callback.
*/
int
lsquic_conn_set_min_datagram_size (lsquic_conn_t *, size_t sz);
struct lsquic_logger_if {
int (*log_buf)(void *logger_ctx, const char *buf, size_t len);
};
/**
* Enumerate timestamp styles supported by LSQUIC logger mechanism.
*/
enum lsquic_logger_timestamp_style {
/**
* No timestamp is generated.
*/
LLTS_NONE,
/**
* The timestamp consists of 24 hours, minutes, seconds, and
* milliseconds. Example: 13:43:46.671
*/
LLTS_HHMMSSMS,
/**
* Like above, plus date, e.g: 2017-03-21 13:43:46.671
*/
LLTS_YYYYMMDD_HHMMSSMS,
/**
* This is Chrome-like timestamp used by proto-quic. The timestamp
* includes month, date, hours, minutes, seconds, and microseconds.
*
* Example: 1223/104613.946956 (instead of 12/23 10:46:13.946956).
*
* This is to facilitate reading two logs side-by-side.
*/
LLTS_CHROMELIKE,
/**
* The timestamp consists of 24 hours, minutes, seconds, and
* microseconds. Example: 13:43:46.671123
*/
LLTS_HHMMSSUS,
/**
* Date and time using microsecond resolution,
* e.g: 2017-03-21 13:43:46.671123
*/
LLTS_YYYYMMDD_HHMMSSUS,
N_LLTS
};
/**
* Call this if you want to do something with LSQUIC log messages, as they
* are thrown out by default.
*/
void lsquic_logger_init(const struct lsquic_logger_if *, void *logger_ctx,
enum lsquic_logger_timestamp_style);
/**
* Set log level for all LSQUIC modules. Acceptable values are debug, info,
* notice, warning, error, alert, emerg, crit (case-insensitive).
*
* @retval 0 Success.
* @retval -1 Failure: log_level is not valid.
*/
int
lsquic_set_log_level (const char *log_level);
/**
* E.g. "event=debug"
*/
int
lsquic_logger_lopt (const char *optarg);
/**
* Return the list of QUIC versions (as bitmask) this engine instance
* supports.
*/
unsigned lsquic_engine_quic_versions (const lsquic_engine_t *);
/**
* This is one of the flags that can be passed to @ref lsquic_global_init.
* Use it to initialize LSQUIC for use in client mode.
*/
#define LSQUIC_GLOBAL_CLIENT (1 << 0)
/**
* This is one of the flags that can be passed to @ref lsquic_global_init.
* Use it to initialize LSQUIC for use in server mode.
*/
#define LSQUIC_GLOBAL_SERVER (1 << 1)
/**
* Initialize LSQUIC. This must be called before any other LSQUIC function
* is called. Returns 0 on success and -1 on failure.
*
* @param flags This a bitmask of @ref LSQUIC_GLOBAL_CLIENT and
* @ref LSQUIC_GLOBAL_SERVER. At least one of these
* flags should be specified.
*
* @retval 0 Success.
* @retval -1 Initialization failed.
*
* @see LSQUIC_GLOBAL_CLIENT
* @see LSQUIC_GLOBAL_SERVER
*/
int
lsquic_global_init (int flags);
/**
* Clean up global state created by @ref lsquic_global_init. Should be
* called after all LSQUIC engine instances are gone.
*/
void
lsquic_global_cleanup (void);
/**
* Get QUIC version used by the connection.
*
* @see lsquic_version
*/
enum lsquic_version
lsquic_conn_quic_version (const lsquic_conn_t *c);
/* Return keysize or -1 on error */
int
lsquic_conn_crypto_keysize (const lsquic_conn_t *c);
/* Return algorithm keysize or -1 on error */
int
lsquic_conn_crypto_alg_keysize (const lsquic_conn_t *c);
enum lsquic_crypto_ver
{
LSQ_CRY_QUIC,
LSQ_CRY_TLSv13,
};
enum lsquic_crypto_ver
lsquic_conn_crypto_ver (const lsquic_conn_t *c);
/* Return cipher or NULL on error */
const char *
lsquic_conn_crypto_cipher (const lsquic_conn_t *c);
/** Translate string QUIC version to LSQUIC QUIC version representation */
enum lsquic_version
lsquic_str2ver (const char *str, size_t len);
/** Translate ALPN (e.g. "h3", "h3-23", "h3-Q046") to LSQUIC enum */
enum lsquic_version
lsquic_alpn2ver (const char *alpn, size_t len);
/**
* This function closes all mini connections and marks all full connections
* as going away. In server mode, this also causes the engine to stop
* creating new connections.
*/
void
lsquic_engine_cooldown (lsquic_engine_t *);
/**
* Get user-supplied context associated with the connection.
*/
lsquic_conn_ctx_t *
lsquic_conn_get_ctx (const lsquic_conn_t *);
/**
* Set user-supplied context associated with the connection.
*/
void
lsquic_conn_set_ctx (lsquic_conn_t *, lsquic_conn_ctx_t *);
/**
* Get peer context associated with the connection.
*/
void *
lsquic_conn_get_peer_ctx (lsquic_conn_t *, const struct sockaddr *local_sa);
/** Get SNI sent by the client */
const char *
lsquic_conn_get_sni (lsquic_conn_t *);
/**
* Abort connection.
*/
void
lsquic_conn_abort (lsquic_conn_t *);
/**
* Helper function: convert list of versions as specified in the argument
* bitmask to string that can be included as argument to "v=" part of the
* Alt-Svc header.
*
* For example (1<<LSQVER_037)|(1<<LSQVER_038) => "37,38"
*
* This is only applicable to Google QUIC versions.
*/
const char *
lsquic_get_alt_svc_versions (unsigned versions);
/**
* Return a NULL-terminated list of HTTP/3 ALPNs, e.g "h3-17", "h3-18", "h3".
*/
const char *const *
lsquic_get_h3_alpns (unsigned versions);
/**
* Returns true if provided buffer could be a valid handshake-stage packet,
* false otherwise. Do not call this function if a connection has already
* been established: it will return incorrect result.
*/
int
lsquic_is_valid_hs_packet (lsquic_engine_t *, const unsigned char *, size_t);
/**
* Parse cid from packet stored in `buf' and store it to `cid'. Returns 0
* on success and -1 on failure.
*/
int
lsquic_cid_from_packet (const unsigned char *, size_t bufsz, lsquic_cid_t *cid);
/**
* On success, offset to the CID is returned (a non-negative value).
* `cid_len' is set to the length of the CID. The server perspective
* is assumed. `server_cid_len' is set to the length of the CIDs that
* server generates.
*
* On failure, a negative value is returned.
*/
int
lsquic_dcid_from_packet (const unsigned char *, size_t bufsz,
unsigned server_cid_len, unsigned *cid_len);
/**
* Returns true if there are connections to be processed, false otherwise.
* If true, `diff' is set to the difference between the earliest advisory
* tick time and now. If the former is in the past, the value of `diff'
* is negative.
*/
int
lsquic_engine_earliest_adv_tick (lsquic_engine_t *engine, int *diff);
/**
* Return number of connections whose advisory tick time is before current
* time plus `from_now' microseconds from now. `from_now' can be negative.
*/
unsigned
lsquic_engine_count_attq (lsquic_engine_t *engine, int from_now);
enum LSQUIC_CONN_STATUS
{
LSCONN_ST_HSK_IN_PROGRESS,
LSCONN_ST_CONNECTED,
LSCONN_ST_HSK_FAILURE,
LSCONN_ST_GOING_AWAY,
LSCONN_ST_TIMED_OUT,
/* If es_honor_prst is not set, the connection will never get public
* reset packets and this flag will not be set.
*/
LSCONN_ST_RESET,
LSCONN_ST_USER_ABORTED,
LSCONN_ST_ERROR,
LSCONN_ST_CLOSED,
LSCONN_ST_PEER_GOING_AWAY,
LSCONN_ST_VERNEG_FAILURE,
};
enum LSQUIC_CONN_STATUS
lsquic_conn_status (lsquic_conn_t *, char *errbuf, size_t bufsz);
extern const char *const
lsquic_ver2str[N_LSQVER];
/* Return connection associated with this SSL object */
lsquic_conn_t *
lsquic_ssl_to_conn (const struct ssl_st *);
/* Return session resumption information that can be used on subsequenct
* connection as argument to lsquic_engine_connect(). Call from inside
* SSL's new session callback.
*
* Returns 0 on success. In this case, `buf' is made to point to newly
* allocated memory containing `buf_sz' bytes. It is the caller's
* responsibility to free the memory.
*/
int
lsquic_ssl_sess_to_resume_info (struct ssl_st *, struct ssl_session_st *,
unsigned char **buf, size_t *buf_sz);
#ifdef __cplusplus
}
#endif
#endif //__LSQUIC_H__
Reference in a new issue View git blame Copy permalink