/* Copyright (c) 2017 - 2022 LiteSpeed Technologies Inc. See LICENSE. */ #ifndef __LSQUIC_H__ #define __LSQUIC_H__ /** * @file * public API for using liblsquic is defined in this file. * */ #include #include #ifndef WIN32 #include #include #else #include #endif struct sockaddr; #ifdef __cplusplus extern "C" { #endif #define LSQUIC_MAJOR_VERSION 3 #define LSQUIC_MINOR_VERSION 1 #define LSQUIC_PATCH_VERSION 2 /** * Engine flags: */ /** Server mode */ #define LSENG_SERVER (1 << 0) /** Use HTTP behavior */ #define LSENG_HTTP (1 << 1) #define LSENG_HTTP_SERVER (LSENG_SERVER|LSENG_HTTP) /** * This is a list of QUIC versions that we know of. List of supported * versions is in LSQUIC_SUPPORTED_VERSIONS. */ enum lsquic_version { /** * Q043. Support for processing PRIORITY frames. Since this library * has supported PRIORITY frames from the beginning, this version is * exactly the same as LSQVER_042. */ LSQVER_043, /** * Q046. Use IETF Draft-17 compatible packet headers. */ LSQVER_046, /** * Q050. Variable-length QUIC server connection IDs. Use CRYPTO frames * for handshake. IETF header format matching invariants-06. Packet * number encryption. Initial packets are obfuscated. */ LSQVER_050, /** * IETF QUIC Draft-27 */ LSQVER_ID27, /** * IETF QUIC Draft-29 */ LSQVER_ID29, /** * IETF QUIC v1. */ LSQVER_I001, /** * Special version to trigger version negotiation. * [draft-ietf-quic-transport-11], Section 3. */ LSQVER_VERNEG, N_LSQVER }; /** * We currently support versions 43, 46, 50, Draft-27, Draft-29, * and IETF QUIC v1. * @see lsquic_version */ #define LSQUIC_SUPPORTED_VERSIONS ((1 << N_LSQVER) - 1) /** * List of versions in which the server never includes CID in short packets. */ #define LSQUIC_FORCED_TCID0_VERSIONS ((1 << LSQVER_046)|(1 << LSQVER_050)) #define LSQUIC_EXPERIMENTAL_VERSIONS ( \ (1 << LSQVER_VERNEG)) #define LSQUIC_DEPRECATED_VERSIONS ((1 << LSQVER_ID27)) #define LSQUIC_GQUIC_HEADER_VERSIONS (1 << LSQVER_043) #define LSQUIC_IETF_VERSIONS ((1 << LSQVER_ID27) \ | (1 << LSQVER_ID29) \ | (1 << LSQVER_I001) | (1 << LSQVER_VERNEG)) #define LSQUIC_IETF_DRAFT_VERSIONS ((1 << LSQVER_ID27) \ | (1 << LSQVER_ID29) \ | (1 << LSQVER_VERNEG)) enum lsquic_hsk_status { /** * The handshake failed. */ LSQ_HSK_FAIL, /** * The handshake succeeded without session resumption. */ LSQ_HSK_OK, /** * The handshake succeeded with session resumption. */ LSQ_HSK_RESUMED_OK, /** * Session resumption failed. Retry the connection without session * resumption. */ LSQ_HSK_RESUMED_FAIL, }; /** * @struct lsquic_stream_if * @brief The definitions of callback functions called by lsquic_stream to * process events. * */ struct lsquic_stream_if { /** * Use @ref lsquic_conn_get_ctx to get back the context. It is * OK for this function to return NULL. */ lsquic_conn_ctx_t *(*on_new_conn)(void *stream_if_ctx, lsquic_conn_t *c); /** This is called when our side received GOAWAY frame. After this, * new streams should not be created. The callback is optional. */ void (*on_goaway_received)(lsquic_conn_t *c); void (*on_conn_closed)(lsquic_conn_t *c); /** If you need to initiate a connection, call lsquic_conn_make_stream(). * This will cause `on_new_stream' callback to be called when appropriate * (this operation is delayed when maximum number of outgoing streams is * reached). * * After `on_close' is called, the stream is no longer accessible. */ lsquic_stream_ctx_t * (*on_new_stream)(void *stream_if_ctx, lsquic_stream_t *s); void (*on_read) (lsquic_stream_t *s, lsquic_stream_ctx_t *h); void (*on_write) (lsquic_stream_t *s, lsquic_stream_ctx_t *h); void (*on_close) (lsquic_stream_t *s, lsquic_stream_ctx_t *h); /* Called when datagram is ready to be written */ ssize_t (*on_dg_write)(lsquic_conn_t *c, void *, size_t); /* Called when datagram is read from a packet. This callback is required * when es_datagrams is true. Take care to process it quickly, as this * is called during lsquic_engine_packet_in(). */ void (*on_datagram)(lsquic_conn_t *, const void *buf, size_t); /* This callback in only called in client mode */ /** * When handshake is completed, this optional callback is called. */ void (*on_hsk_done)(lsquic_conn_t *c, enum lsquic_hsk_status s); /** * When client receives a token in NEW_TOKEN frame, this callback is called. * The callback is optional. */ void (*on_new_token)(lsquic_conn_t *c, const unsigned char *token, size_t token_size); /** * This optional callback lets client record information needed to * perform a session resumption next time around. * * For IETF QUIC, this is called only if ea_get_ssl_ctx() is *not* set, * in which case the library creates its own SSL_CTX. * * Note: this callback will be deprecated when gQUIC support is removed. */ void (*on_sess_resume_info)(lsquic_conn_t *c, const unsigned char *, size_t); /** * Optional callback is called as soon as the peer resets a stream. * The argument `how' is either 0, 1, or 2, meaning "read", "write", and * "read and write", respectively (just like in shutdown(2)). This * signals the user to stop reading, writing, or both. * * Note that resets differ in gQUIC and IETF QUIC. In gQUIC, `how' is * always 2; in IETF QUIC, `how' is either 0 or 1 because one can reset * just one direction in IETF QUIC. */ void (*on_reset) (lsquic_stream_t *s, lsquic_stream_ctx_t *h, int how); /** * Optional callback is called when a CONNECTION_CLOSE frame is received. * This allows the application to log low-level diagnostic information about * errors received with the CONNECTION_CLOSE frame. If app_error is -1 then * it is considered unknown if this is an app_error or not. */ void (*on_conncloseframe_received)(lsquic_conn_t *c, int app_error, uint64_t error_code, const char *reason, int reason_len); }; struct ssl_ctx_st; struct ssl_st; struct ssl_session_st; struct lsxpack_header; /** * QUIC engine in server mode needs access to certificates. This is * accomplished by providing a callback and a context to the engine * constructor. */ /* `sni' may be NULL if engine is not HTTP mode and client TLS transport * parameters did not include the SNI. */ typedef struct ssl_ctx_st * (*lsquic_lookup_cert_f)( void *lsquic_cert_lookup_ctx, const struct sockaddr *local, const char *sni); /** * Minimum flow control window is set to 16 KB for both client and server. * This means we can send up to this amount of data before handshake gets * completed. */ #define LSQUIC_MIN_FCW (16 * 1024) /* Each LSQUIC_DF_* value corresponds to es_* entry in * lsquic_engine_settings below. */ /** * By default, deprecated and experimental versions are not included. */ #define LSQUIC_DF_VERSIONS (LSQUIC_SUPPORTED_VERSIONS & \ ~LSQUIC_DEPRECATED_VERSIONS & \ ~LSQUIC_EXPERIMENTAL_VERSIONS) #define LSQUIC_DF_CFCW_SERVER (3 * 1024 * 1024 / 2) #define LSQUIC_DF_CFCW_CLIENT (15 * 1024 * 1024) #define LSQUIC_DF_SFCW_SERVER (1 * 1024 * 1024) #define LSQUIC_DF_SFCW_CLIENT (6 * 1024 * 1024) #define LSQUIC_DF_MAX_STREAMS_IN 100 /* IQUIC uses different names for these: */ #define LSQUIC_DF_INIT_MAX_DATA_SERVER LSQUIC_DF_CFCW_SERVER #define LSQUIC_DF_INIT_MAX_DATA_CLIENT LSQUIC_DF_CFCW_CLIENT #define LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_REMOTE_SERVER LSQUIC_DF_SFCW_SERVER #define LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_LOCAL_SERVER 0 #define LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_REMOTE_CLIENT 0 #define LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_LOCAL_CLIENT LSQUIC_DF_SFCW_CLIENT #define LSQUIC_DF_INIT_MAX_STREAMS_BIDI LSQUIC_DF_MAX_STREAMS_IN #define LSQUIC_DF_INIT_MAX_STREAMS_UNI_CLIENT 100 #define LSQUIC_DF_INIT_MAX_STREAMS_UNI_SERVER 3 /* XXX What's a good value here? */ #define LSQUIC_DF_INIT_MAX_STREAM_DATA_UNI_CLIENT (32 * 1024) #define LSQUIC_DF_INIT_MAX_STREAM_DATA_UNI_SERVER (12 * 1024) /** * Default idle connection time in seconds. */ #define LSQUIC_DF_IDLE_TIMEOUT 30 /** * Default ping period in seconds. */ #define LSQUIC_DF_PING_PERIOD 15 /** * Default handshake timeout in microseconds. */ #define LSQUIC_DF_HANDSHAKE_TO (10 * 1000 * 1000) #define LSQUIC_DF_IDLE_CONN_TO (LSQUIC_DF_IDLE_TIMEOUT * 1000 * 1000) #define LSQUIC_DF_SILENT_CLOSE 1 /** Default value of maximum header list size. If set to non-zero value, * SETTINGS_MAX_HEADER_LIST_SIZE will be sent to peer after handshake is * completed (assuming the peer supports this setting frame type). */ #define LSQUIC_DF_MAX_HEADER_LIST_SIZE 0 /** Default value of UAID (user-agent ID). */ #define LSQUIC_DF_UA "LSQUIC" #define LSQUIC_DF_STTL 86400 #define LSQUIC_DF_MAX_INCHOATE (1 * 1000 * 1000) /** Do not use NSTP by default */ #define LSQUIC_DF_SUPPORT_NSTP 0 /** TODO: IETF QUIC clients do not support push */ #define LSQUIC_DF_SUPPORT_PUSH 1 #define LSQUIC_DF_SUPPORT_TCID0 1 /** By default, LSQUIC ignores Public Reset packets. */ #define LSQUIC_DF_HONOR_PRST 0 /** * By default, LSQUIC will not send Public Reset packets in response to * packets that specify unknown connections. */ #define LSQUIC_DF_SEND_PRST 0 /** By default, infinite loop checks are turned on */ #define LSQUIC_DF_PROGRESS_CHECK 1000 /** By default, read/write events are dispatched in a loop */ #define LSQUIC_DF_RW_ONCE 0 /** By default, the threshold is not enabled */ #define LSQUIC_DF_PROC_TIME_THRESH 0 /** By default, packets are paced */ #define LSQUIC_DF_PACE_PACKETS 1 /** Default clock granularity is 1000 microseconds */ #define LSQUIC_DF_CLOCK_GRANULARITY 1000 /** The default value is 8 for simplicity */ #define LSQUIC_DF_SCID_LEN 8 /** The default value is 60 CIDs per minute */ #define LSQUIC_DF_SCID_ISS_RATE 60 #define LSQUIC_DF_QPACK_DEC_MAX_BLOCKED 100 #define LSQUIC_DF_QPACK_DEC_MAX_SIZE 4096 #define LSQUIC_DF_QPACK_ENC_MAX_BLOCKED 100 #define LSQUIC_DF_QPACK_ENC_MAX_SIZE 4096 /* By default, QPACK experiments are turned off */ #define LSQUIC_DF_QPACK_EXPERIMENT 0 /** ECN is disabled by default */ #define LSQUIC_DF_ECN 0 /** Allow migration by default */ #define LSQUIC_DF_ALLOW_MIGRATION 1 /** Use QL loss bits by default */ #define LSQUIC_DF_QL_BITS 2 /** Turn spin bit on by default */ #define LSQUIC_DF_SPIN 1 /** Turn on delayed ACKs extension by default */ #define LSQUIC_DF_DELAYED_ACKS 1 /** * Defaults for the Packet Tolerance PID Controller (PTPC) used by the * Delayed ACKs extension: */ #define LSQUIC_DF_PTPC_PERIODICITY 3 #define LSQUIC_DF_PTPC_MAX_PACKTOL 150 #define LSQUIC_DF_PTPC_DYN_TARGET 1 #define LSQUIC_DF_PTPC_TARGET 1.0 #define LSQUIC_DF_PTPC_PROP_GAIN 0.8 #define LSQUIC_DF_PTPC_INT_GAIN 0.35 #define LSQUIC_DF_PTPC_ERR_THRESH 0.05 #define LSQUIC_DF_PTPC_ERR_DIVISOR 0.05 /** Turn on timestamp extension by default */ #define LSQUIC_DF_TIMESTAMPS 1 /* Use Adaptive CC by default */ #define LSQUIC_DF_CC_ALGO 3 /* Default value of the CC RTT threshold is 1.5 ms */ #define LSQUIC_DF_CC_RTT_THRESH 1500 /** Turn off datagram extension by default */ #define LSQUIC_DF_DATAGRAMS 0 /** Assume optimistic NAT by default. */ #define LSQUIC_DF_OPTIMISTIC_NAT 1 /** Turn on Extensible HTTP Priorities by default. */ #define LSQUIC_DF_EXT_HTTP_PRIO 1 /** By default, incoming packet size is not limited. */ #define LSQUIC_DF_MAX_UDP_PAYLOAD_SIZE_RX 0 /** * By default, greasing the QUIC bit is enabled (if peer sent * the "grease_quic_bit" transport parameter). */ #define LSQUIC_DF_GREASE_QUIC_BIT 1 /** By default, DPLPMTUD is enabled */ #define LSQUIC_DF_DPLPMTUD 1 /** By default, this value is left up to the engine. */ #define LSQUIC_DF_BASE_PLPMTU 0 /** By default, this value is left up to the engine. */ #define LSQUIC_DF_MAX_PLPMTU 0 /** By default, drop no-progress connections after 60 seconds on the server */ #define LSQUIC_DF_NOPROGRESS_TIMEOUT_SERVER 60 /** By default, do not use no-progress timeout on the client */ #define LSQUIC_DF_NOPROGRESS_TIMEOUT_CLIENT 0 /** By default, we use the minimum timer of 1000 milliseconds */ #define LSQUIC_DF_MTU_PROBE_TIMER 1000 /** By default, calling on_close() is not delayed */ #define LSQUIC_DF_DELAY_ONCLOSE 0 /** * By default, maximum batch size is not specified, leaving it up to the * library. */ #define LSQUIC_DF_MAX_BATCH_SIZE 0 /** Transport parameter sanity checks are performed by default. */ #define LSQUIC_DF_CHECK_TP_SANITY 1 struct lsquic_engine_settings { /** * This is a bit mask wherein each bit corresponds to a value in * enum lsquic_version. Client starts negotiating with the highest * version and goes down. Server supports either of the versions * specified here. * * This setting applies to both Google and IETF QUIC. * * @see lsquic_version */ unsigned es_versions; /** * Initial default CFCW. * * In server mode, per-connection values may be set lower than * this if resources are scarce. * * Do not set es_cfcw and es_sfcw lower than @ref LSQUIC_MIN_FCW. * * @see es_max_cfcw */ unsigned es_cfcw; /** * Initial default SFCW. * * In server mode, per-connection values may be set lower than * this if resources are scarce. * * Do not set es_cfcw and es_sfcw lower than @ref LSQUIC_MIN_FCW. * * @see es_max_sfcw */ unsigned es_sfcw; /** * This value is used to specify maximum allowed value CFCW is allowed * to reach due to window auto-tuning. By default, this value is zero, * which means that CFCW is not allowed to increase from its initial * value. * * This setting is applicable to both gQUIC and IETF QUIC. * * @see es_cfcw, @see es_init_max_data. */ unsigned es_max_cfcw; /** * This value is used to specify the maximum value stream flow control * window is allowed to reach due to auto-tuning. By default, this * value is zero, meaning that auto-tuning is turned off. * * This setting is applicable to both gQUIC and IETF QUIC. * * @see es_sfcw, @see es_init_max_stream_data_bidi_remote, * @see es_init_max_stream_data_bidi_local. */ unsigned es_max_sfcw; /** MIDS */ unsigned es_max_streams_in; /** * Handshake timeout in microseconds. * * For client, this can be set to an arbitrary value (zero turns the * timeout off). * * For server, this value is limited to about 16 seconds. Do not set * it to zero. */ unsigned long es_handshake_to; /** ICSL in microseconds; GQUIC only */ unsigned long es_idle_conn_to; /** * When true, CONNECTION_CLOSE is not sent when connection times out. * The server will also not send a reply to client's CONNECTION_CLOSE. * * Corresponds to SCLS (silent close) gQUIC option. */ int es_silent_close; /** * This corresponds to SETTINGS_MAX_HEADER_LIST_SIZE * (RFC 7540, Section 6.5.2). 0 means no limit. Defaults * to @ref LSQUIC_DF_MAX_HEADER_LIST_SIZE. */ unsigned es_max_header_list_size; /** UAID -- User-Agent ID. Defaults to @ref LSQUIC_DF_UA. */ const char *es_ua; /** * More parameters for server */ uint64_t es_sttl; /* SCFG TTL in seconds */ uint32_t es_pdmd; /* One fixed value X509 */ uint32_t es_aead; /* One fixed value AESG */ uint32_t es_kexs; /* One fixed value C255 */ /* Maximum number of incoming connections in inchoate state. This is * only applicable in server mode. */ unsigned es_max_inchoate; /** * Setting this value to 0 means that * * For client: * a) we send a SETTINGS frame to indicate that we do not support server * push; and * b) All incoming pushed streams get reset immediately. * (For maximum effect, set es_max_streams_in to 0.) * * For server: * lsquic_conn_push_stream() will return -1. */ int es_support_push; /** * If set to true value, the server will not include connection ID in * outgoing packets if client's CHLO specifies TCID=0. * * For client, this means including TCID=0 into CHLO message. Note that * in this case, the engine tracks connections by the * (source-addr, dest-addr) tuple, thereby making it necessary to create * a socket for each connection. * * This option has no effect in Q046 and Q050, as the server never includes * CIDs in the short packets. * * This setting is applicable to gQUIC only. * * The default is @ref LSQUIC_DF_SUPPORT_TCID0. */ int es_support_tcid0; /** * Q037 and higher support "No STOP_WAITING frame" mode. When set, the * client will send NSTP option in its Client Hello message and will not * sent STOP_WAITING frames, while ignoring incoming STOP_WAITING frames, * if any. Note that if the version negotiation happens to downgrade the * client below Q037, this mode will *not* be used. * * This option does not affect the server, as it must support NSTP mode * if it was specified by the client. * * This setting is applicable to gQUIC only. */ int es_support_nstp; /** * If set to true value, the library will drop connections when it * receives corresponding Public Reset packet. The default is to * ignore these packets. * * The default is @ref LSQUIC_DF_HONOR_PRST. */ int es_honor_prst; /** * If set to true value, the library will send Public Reset packets * in response to incoming packets with unknown Connection IDs. * The default is @ref LSQUIC_DF_SEND_PRST. */ int es_send_prst; /** * A non-zero value enables internal checks that identify suspected * infinite loops in user @ref on_read and @ref on_write callbacks * and break them. An infinite loop may occur if user code keeps * on performing the same operation without checking status, e.g. * reading from a closed stream etc. * * The value of this parameter is as follows: should a callback return * this number of times in a row without making progress (that is, * reading, writing, or changing stream state), loop break will occur. * * The defaut value is @ref LSQUIC_DF_PROGRESS_CHECK. */ unsigned es_progress_check; /** * A non-zero value make stream dispatch its read-write events once * per call. * * When zero, read and write events are dispatched until the stream * is no longer readable or writeable, respectively, or until the * user signals unwillingness to read or write using * @ref lsquic_stream_wantread() or @ref lsquic_stream_wantwrite() * or shuts down the stream. * * This also applies to the on_dg_write() callback. * * The default value is @ref LSQUIC_DF_RW_ONCE. */ int es_rw_once; /** * If set, this value specifies the number of microseconds that * @ref lsquic_engine_process_conns() and * @ref lsquic_engine_send_unsent_packets() are allowed to spend * before returning. * * This is not an exact science and the connections must make * progress, so the deadline is checked after all connections get * a chance to tick (in the case of @ref lsquic_engine_process_conns()) * and at least one batch of packets is sent out. * * When processing function runs out of its time slice, immediate * calls to @ref lsquic_engine_has_unsent_packets() return false. * * The default value is @ref LSQUIC_DF_PROC_TIME_THRESH. */ unsigned es_proc_time_thresh; /** * If set to true, packet pacing is implemented per connection. * * The default value is @ref LSQUIC_DF_PACE_PACKETS. */ int es_pace_packets; /** * Clock granularity information is used by the pacer. The value * is in microseconds; default is @ref LSQUIC_DF_CLOCK_GRANULARITY. */ unsigned es_clock_granularity; /** * Congestion control algorithm to use. * * 0: Use default (@ref LSQUIC_DF_CC_ALGO) * 1: Cubic * 2: BBRv1 * 3: Adaptive (Cubic or BBRv1) */ unsigned es_cc_algo; /** * Congestion controller RTT threshold in microseconds. * * Adaptive congestion control uses BBRv1 until RTT is determined. At * that point a permanent choice of congestion controller is made. If * RTT is smaller than or equal to es_cc_rtt_thresh, congestion * controller is switched to Cubic; otherwise, BBRv1 is picked. * * The default value is @ref LSQUIC_DF_CC_RTT_THRESH. */ unsigned es_cc_rtt_thresh; /** * No progress timeout. * * If connection does not make progress for this number of seconds, the * connection is dropped. Here, progress is defined as user streams * being written to or read from. * * If this value is zero, this timeout is disabled. * * Default value is @ref LSQUIC_DF_NOPROGRESS_TIMEOUT_SERVER in server * mode and @ref LSQUIC_DF_NOPROGRESS_TIMEOUT_CLIENT in client mode. */ unsigned es_noprogress_timeout; /* The following settings are specific to IETF QUIC. */ /* vvvvvvvvvvv */ /** * Initial max data. * * This is a transport parameter. * * Depending on the engine mode, the default value is either * @ref LSQUIC_DF_INIT_MAX_DATA_CLIENT or * @ref LSQUIC_DF_INIT_MAX_DATA_SERVER. */ unsigned es_init_max_data; /** * Initial maximum amount of stream data allowed to be sent on streams * created by remote end (peer). * * This is a transport parameter. * * Depending on the engine mode, the default value is either * @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_REMOTE_CLIENT or * @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_REMOTE_SERVER. */ unsigned es_init_max_stream_data_bidi_remote; /** * Initial maximum amount of stream data allowed to be sent on streams * created by remote end (peer). * * This is a transport parameter. * * Depending on the engine mode, the default value is either * @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_LOCAL_CLIENT or * @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_BIDI_LOCAL_SERVER. */ unsigned es_init_max_stream_data_bidi_local; /** * Initial max stream data for unidirectional streams initiated * by remote endpoint. * * This is a transport parameter. * * Depending on the engine mode, the default value is either * @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_UNI_CLIENT or * @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_UNI_SERVER. */ unsigned es_init_max_stream_data_uni; /** * Maximum initial number of bidirectional stream. * * This is a transport parameter. * * Default value is @ref LSQUIC_DF_INIT_MAX_STREAMS_BIDI. */ unsigned es_init_max_streams_bidi; /** * Maximum initial number of unidirectional stream. * * This is a transport parameter. * * Default value is @ref LSQUIC_DF_INIT_MAX_STREAMS_UNI_CLIENT or * @ref LSQUIC_DF_INIT_MAX_STREAM_DATA_UNI_SERVER. */ unsigned es_init_max_streams_uni; /** * Idle connection timeout. * * This is a transport parameter. * * (Note: es_idle_conn_to is not reused because it is in microseconds, * which, I now realize, was not a good choice. Since it will be * obsoleted some time after the switchover to IETF QUIC, we do not * have to keep on using strange units.) * * Default value is @ref LSQUIC_DF_IDLE_TIMEOUT. * * Maximum value is 600 seconds. */ unsigned es_idle_timeout; /** * Ping period. If set to non-zero value, the connection will generate and * send PING frames in the absence of other activity. * * By default, the server does not send PINGs and the period is set to zero. * The client's defaut value is @ref LSQUIC_DF_PING_PERIOD. */ unsigned es_ping_period; /** * Source Connection ID length. Only applicable to the IETF QUIC * versions. Valid values are 0 through 20, inclusive. * * Default value is @ref LSQUIC_DF_SCID_LEN. */ unsigned es_scid_len; /** * Source Connection ID issuance rate. Only applicable to the IETF QUIC * versions. This field is measured in CIDs per minute. Using value 0 * indicates that there is no rate limit for CID issuance. * * Default value is @ref LSQUIC_DF_SCID_ISS_RATE. */ unsigned es_scid_iss_rate; /** * Maximum size of the QPACK dynamic table that the QPACK decoder will * use. * * The default is @ref LSQUIC_DF_QPACK_DEC_MAX_SIZE. */ unsigned es_qpack_dec_max_size; /** * Maximum number of blocked streams that the QPACK decoder is willing * to tolerate. * * The default is @ref LSQUIC_DF_QPACK_DEC_MAX_BLOCKED. */ unsigned es_qpack_dec_max_blocked; /** * Maximum size of the dynamic table that the encoder is willing to use. * The actual size of the dynamic table will not exceed the minimum of * this value and the value advertized by peer. * * The default is @ref LSQUIC_DF_QPACK_ENC_MAX_SIZE. */ unsigned es_qpack_enc_max_size; /** * Maximum number of blocked streams that the QPACK encoder is willing * to risk. The actual number of blocked streams will not exceed the * minimum of this value and the value advertized by peer. * * The default is @ref LSQUIC_DF_QPACK_ENC_MAX_BLOCKED. */ unsigned es_qpack_enc_max_blocked; /** * Enable ECN support. * * The default is @ref LSQUIC_DF_ECN */ int es_ecn; /** * Allow peer to migrate connection. * * The default is @ref LSQUIC_DF_ALLOW_MIGRATION */ int es_allow_migration; /** * Use QL loss bits. Allowed values are: * 0: Do not use loss bits * 1: Allow loss bits * 2: Allow and send loss bits * * Default value is @ref LSQUIC_DF_QL_BITS */ int es_ql_bits; /** * Enable spin bit. Allowed values are 0 and 1. * * Default value is @ref LSQUIC_DF_SPIN */ int es_spin; /** * Enable delayed ACKs extension. Allowed values are 0 and 1. * * Default value is @ref LSQUIC_DF_DELAYED_ACKS */ int es_delayed_acks; /** * Enable timestamps extension. Allowed values are 0 and 1. * * Default value is @ref LSQUIC_DF_TIMESTAMPS */ int es_timestamps; /** * Maximum packet size we are willing to receive. This is sent to * peer in transport parameters: the library does not enforce this * limit for incoming packets. * * If set to zero, limit is not set. * * Default value is @ref LSQUIC_DF_MAX_UDP_PAYLOAD_SIZE_RX */ unsigned short es_max_udp_payload_size_rx; /** * Enable the "QUIC bit grease" extension. When set to a true value, * lsquic will grease the QUIC bit on the outgoing QUIC packets if * the peer sent the "grease_quic_bit" transport parameter. * * Default value is @ref LSQUIC_DF_GREASE_QUIC_BIT */ int es_grease_quic_bit; /** * If set to true value, enable DPLPMTUD -- Datagram Packetization * Layer Path MTU Discovery. * * Default value is @ref LSQUIC_DF_DPLPMTUD */ int es_dplpmtud; /** * PLPMTU size expected to work for most paths. * * If set to zero, this value is calculated based on QUIC and IP versions. * * Default value is @ref LSQUIC_DF_BASE_PLPMTU. */ unsigned short es_base_plpmtu; /** * Largest PLPMTU size the engine will try. * * If set to zero, picking this value is left to the engine. * * Default value is @ref LSQUIC_DF_MAX_PLPMTU. */ unsigned short es_max_plpmtu; /** * This value specifies how long the DPLPMTUD probe timer is, in * milliseconds. [draft-ietf-tsvwg-datagram-plpmtud-17] says: * " PROBE_TIMER: The PROBE_TIMER is configured to expire after a period " longer than the maximum time to receive an acknowledgment to a " probe packet. This value MUST NOT be smaller than 1 second, and " SHOULD be larger than 15 seconds. Guidance on selection of the " timer value are provided in section 3.1.1 of the UDP Usage " Guidelines [RFC8085]. * * If set to zero, the default is used. * * Default value is @ref LSQUIC_DF_MTU_PROBE_TIMER. */ unsigned es_mtu_probe_timer; /** * Enable datagram extension. Allowed values are 0 and 1. * * Default value is @ref LSQUIC_DF_DATAGRAMS */ int es_datagrams; /** * If set to true, changes in peer port are assumed to be due to a * benign NAT rebinding and path characteristics -- MTU, RTT, and * CC state -- are not reset. * * Default value is @ref LSQUIC_DF_OPTIMISTIC_NAT. */ int es_optimistic_nat; /** * If set to true, Extensible HTTP Priorities are enabled. This * is HTTP/3-only setting. * * Default value is @ref LSQUIC_DF_EXT_HTTP_PRIO */ int es_ext_http_prio; /** * If set to 1, QPACK statistics are logged per connection. * * If set to 2, QPACK experiments are run. In this mode, encoder * and decoder setting values are randomly selected (from the range * [0, whatever is specified in es_qpack_(enc|dec)_*]) and these * values along with compression ratio and user agent are logged at * NOTICE level when connection is destroyed. The purpose of these * experiments is to use compression performance statistics to figure * out a good set of default values. * * Default value is @ref LSQUIC_DF_QPACK_EXPERIMENT. */ int es_qpack_experiment; /** * Settings for the Packet Tolerance PID Controller (PTPC) used for * the Delayed ACKs logic. Periodicity is how often the number of * incoming ACKs is sampled. Periodicity's units is the number of * RTTs. Target is the average number of incoming ACKs per RTT we * want to achieve. Error threshold defines the range of error values * within which no action is taken. For example, error threshold of * 0.03 means that adjustment actions will be taken only when the * error is outside of the [-0.03, 0.03] range. Proportional and * integral gains have their usual meanings described here: * https://en.wikipedia.org/wiki/PID_controller#Controller_theory * * The average is normalized as follows: * AvgNormalized = Avg * e / Target # Where 'e' is 2.71828... * * The error is then calculated as ln(AvgNormalized) - 1. This gives * us a logarithmic scale that is convenient to use for adjustment * calculations. The error divisor is used to calculate the packet * tolerance adjustment: * Adjustment = Error / ErrorDivisor * * WARNING. The library comes with sane defaults. Only fiddle with * these knobs if you know what you are doing. */ unsigned es_ptpc_periodicity; /* LSQUIC_DF_PTPC_PERIODICITY */ unsigned es_ptpc_max_packtol; /* LSQUIC_DF_PTPC_MAX_PACKTOL */ int es_ptpc_dyn_target; /* LSQUIC_DF_PTPC_DYN_TARGET */ float es_ptpc_target, /* LSQUIC_DF_PTPC_TARGET */ es_ptpc_prop_gain, /* LSQUIC_DF_PTPC_PROP_GAIN */ es_ptpc_int_gain, /* LSQUIC_DF_PTPC_INT_GAIN */ es_ptpc_err_thresh, /* LSQUIC_DF_PTPC_ERR_THRESH */ es_ptpc_err_divisor; /* LSQUIC_DF_PTPC_ERR_DIVISOR */ /** * When set to true, the on_close() callback will be delayed until the * peer acknowledges all data sent on the stream. (Or until the connection * is destroyed in some manner -- either explicitly closed by the user or * as a result of an engine shutdown.) * * Default value is @ref LSQUIC_DF_DELAY_ONCLOSE */ int es_delay_onclose; /** * If set to a non-zero value, specified maximum batch size. (The * batch of packets passed to @ref ea_packets_out() callback). Must * be no larger than 1024. * * Default value is @ref LSQUIC_DF_MAX_BATCH_SIZE */ unsigned es_max_batch_size; /** * When true, sanity checks are performed on peer's transport parameter * values. If some limits are set suspiciously low, the connection won't * be established. * * Default value is @ref LSQUIC_DF_CHECK_TP_SANITY */ int es_check_tp_sanity; }; /* Initialize `settings' to default values */ void lsquic_engine_init_settings (struct lsquic_engine_settings *, unsigned lsquic_engine_flags); /** * Check settings for errors. * * @param settings Settings struct. * * @param flags Engine flags. * * @param err_buf Optional pointer to buffer into which error string * is written. * @param err_buf_sz Size of err_buf. No more than this number of bytes * will be written to err_buf, including the NUL byte. * * @retval 0 Settings have no errors. * @retval -1 There are errors in settings. */ int lsquic_engine_check_settings (const struct lsquic_engine_settings *settings, unsigned lsquic_engine_flags, char *err_buf, size_t err_buf_sz); struct lsquic_out_spec { struct iovec *iov; size_t iovlen; const struct sockaddr *local_sa; const struct sockaddr *dest_sa; void *peer_ctx; lsquic_conn_ctx_t *conn_ctx; /* will be NULL when sending out the first batch of handshake packets */ int ecn; /* Valid values are 0 - 3. See RFC 3168 */ }; /** * Returns number of packets successfully sent out or -1 on error. -1 should * only be returned if no packets were sent out. If -1 is returned or if the * return value is smaller than `n_packets_out', this indicates that sending * of packets is not possible. * * If not all packets could be sent out, errno is examined. If it is not * EAGAIN or EWOULDBLOCK, the connection whose packet cause the error is * closed forthwith. * * No packets will be attempted to be sent out until * @ref lsquic_engine_send_unsent_packets() is called. */ typedef int (*lsquic_packets_out_f)( void *packets_out_ctx, const struct lsquic_out_spec *out_spec, unsigned n_packets_out ); /** * The shared hash interface is used to share data between multiple LSQUIC * instances. */ struct lsquic_shared_hash_if { /** * If you want your item to never expire, set `expiry' to zero. * Returns 0 on success, -1 on failure. * * If inserted successfully, `free()' will be called on `data' and 'key' * pointer when the element is deleted, whether due to expiration * or explicit deletion. */ int (*shi_insert)(void *shi_ctx, void *key, unsigned key_sz, void *data, unsigned data_sz, time_t expiry); /** * Returns 0 on success, -1 on failure. */ int (*shi_delete)(void *shi_ctx, const void *key, unsigned key_sz); /** * `data' is pointed to the result and `data_sz' is set to the * object size. The implementation may choose to copy the object * into buffer pointed to by `data', so you should have it ready. * * @retval 1 found. * @retval 0 not found. * @retval -1 error (perhaps not enough room in `data' if copy was * attempted). */ int (*shi_lookup)(void *shi_ctx, const void *key, unsigned key_sz, void **data, unsigned *data_sz); }; /** * The packet out memory interface is used by LSQUIC to get buffers to * which outgoing packets will be written before they are passed to * ea_packets_out callback. * * If not specified, malloc() and free() are used. */ struct lsquic_packout_mem_if { /** * Allocate buffer for sending. */ void * (*pmi_allocate) (void *pmi_ctx, void *peer_ctx, lsquic_conn_ctx_t *, unsigned short sz, char is_ipv6); /** * This function is used to release the allocated buffer after it is * sent via @ref ea_packets_out. */ void (*pmi_release) (void *pmi_ctx, void *peer_ctx, void *buf, char is_ipv6); /** * If allocated buffer is not going to be sent, return it to the caller * using this function. */ void (*pmi_return) (void *pmi_ctx, void *peer_ctx, void *buf, char is_ipv6); }; typedef void (*lsquic_cids_update_f)(void *ctx, void **peer_ctx, const lsquic_cid_t *cids, unsigned n_cids); struct stack_st_X509; enum lsquic_hsi_flag { /** * Turn HTTP/1.x mode on or off. In this mode, decoded name and value * pair are separated by ": " and "\r\n" is appended to the end of the * string. By default, this mode is off. */ LSQUIC_HSI_HTTP1X = 1 << 1, /** Include name hash into lsxpack_header */ LSQUIC_HSI_HASH_NAME = 1 << 2, /** Include nameval hash into lsxpack_header */ LSQUIC_HSI_HASH_NAMEVAL = 1 << 3, }; struct lsquic_hset_if { /** * Create a new header set. This object is (and must be) fetched from a * stream by calling @ref lsquic_stream_get_hset() before the stream can * be read. * * `stream' may be set to NULL in server mode. */ void * (*hsi_create_header_set)(void *hsi_ctx, lsquic_stream_t *stream, int is_push_promise); /** * Return a header set prepared for decoding. If `hdr' is NULL, this * means return a new structure with at least `space' bytes available * in the decoder buffer. On success, a newly prepared header is * returned. * * If `hdr' is not NULL, it means there was not enough decoder buffer * and it must be increased to at least `space' bytes. `buf', `val_len', * and `name_offset' member of the `hdr' structure may change. On * success, the return value is the same as `hdr'. * * If NULL is returned, the space cannot be allocated. */ struct lsxpack_header * (*hsi_prepare_decode)(void *hdr_set, struct lsxpack_header *hdr, size_t space); /** * Process new header. Return 0 on success, a positive value if a header * error occured, or a negative value on any other error. * * A positive return value will result in cancellation of associated * stream. * * A negative return value will result in connection being aborted. * * `hdr_set' is the header set object returned by * @ref hsi_create_header_set(). * * `hdr' is the header returned by @ref `hsi_prepare_decode'. * * If `hdr' is NULL, this means that no more header are going to be * added to the set. */ int (*hsi_process_header)(void *hdr_set, struct lsxpack_header *hdr); /** * Discard header set. This is called for unclaimed header sets and * header sets that had an error. */ void (*hsi_discard_header_set)(void *hdr_set); /** * These flags specify properties of decoded headers passed to * hsi_process_header(). This is only applicable to QPACK headers; * HPACK library header properties are based on compilation, not * run-time, options. */ enum lsquic_hsi_flag hsi_flags; }; /** * This struct contains a list of all callbacks that are used by the engine * to communicate with the user code. Most of these are optional, while * the following are mandatory: * * @ref ea_stream_if The stream interface. * @ref ea_packets_out Function to send packets. * @ref ea_lookup_cert Function to look up certificates by SNI (used * in server mode). * * A pointer to this structure is passed to engine constructor * @ref lsquic_engine_new(). */ struct lsquic_engine_api { const struct lsquic_engine_settings *ea_settings; /* Optional */ /** Stream interface is required to manage connections and streams. */ const struct lsquic_stream_if *ea_stream_if; void *ea_stream_if_ctx; /** Function to send packets out is required. */ lsquic_packets_out_f ea_packets_out; void *ea_packets_out_ctx; /** Function to look up certificates by SNI is used in server mode. */ lsquic_lookup_cert_f ea_lookup_cert; void *ea_cert_lu_ctx; /** Mandatory callback for server, optional for client. */ struct ssl_ctx_st * (*ea_get_ssl_ctx)(void *peer_ctx, const struct sockaddr *local); /** * Shared hash interface is optional. If set to zero, performance of * multiple LSQUIC instances will be degraded. */ const struct lsquic_shared_hash_if *ea_shi; void *ea_shi_ctx; /** * Memory interface is optional. */ const struct lsquic_packout_mem_if *ea_pmi; void *ea_pmi_ctx; /** * Optional interface to report new and old source connection IDs. */ lsquic_cids_update_f ea_new_scids; lsquic_cids_update_f ea_live_scids; lsquic_cids_update_f ea_old_scids; void *ea_cids_update_ctx; /** * Function to verify server certificate. The chain contains at least * one element. The first element in the chain is the server * certificate. The chain belongs to the library. If you want to * retain it, call sk_X509_up_ref(). * * 0 is returned on success, -1 on error. * * If the function pointer is not set, no verification is performed * (the connection is allowed to proceed). */ int (*ea_verify_cert)(void *verify_ctx, struct stack_st_X509 *chain); void *ea_verify_ctx; /** * Optional header set interface. If not specified, the incoming headers * are converted to HTTP/1.x format and are read from stream and have to * be parsed again. */ const struct lsquic_hset_if *ea_hsi_if; void *ea_hsi_ctx; /** * If set, engine will print cumulative connection statistics to this * file just before it is destroyed. (Must be compiled with * -DLSQUIC_CONN_STATS=1). */ void /* FILE, really */ *ea_stats_fh; /** * The optional ALPN string is used by the client if @ref LSENG_HTTP * is not set. */ const char *ea_alpn; /** * Optional interface to control the creation of connection IDs */ void (*ea_generate_scid)(void *ctx, lsquic_conn_t *, lsquic_cid_t *, unsigned); /** Passed to ea_generate_scid() */ void *ea_gen_scid_ctx; }; /** * Create new engine. * * @param lsquic_engine_flags A bitmask of @ref LSENG_SERVER and * @ref LSENG_HTTP * * @param api Required parameter that specifies * various callbacks. * * The engine can be instantiated either in server mode (when LSENG_SERVER * is set) or client mode. If you need both server and client in your * program, create two engines (or as many as you'd like). */ lsquic_engine_t * lsquic_engine_new (unsigned lsquic_engine_flags, const struct lsquic_engine_api *api); /** * Create a client connection to peer identified by `peer_ctx'. * * To let the engine specify QUIC version, use N_LSQVER. If session resumption * information is supplied, version is picked from there instead. * * If `base_plpmtu' is set to zero, it is selected based on the * engine settings, QUIC version, and IP version. */ lsquic_conn_t * lsquic_engine_connect (lsquic_engine_t *, enum lsquic_version, const struct sockaddr *local_sa, const struct sockaddr *peer_sa, void *peer_ctx, lsquic_conn_ctx_t *conn_ctx, const char *hostname, unsigned short base_plpmtu, const unsigned char *sess_resume, size_t sess_resume_len, /** Resumption token: optional */ const unsigned char *token, size_t token_sz); /** * Pass incoming packet to the QUIC engine. This function can be called * more than once in a row. After you add one or more packets, call * lsquic_engine_process_conns() to schedule output, if any. * * @retval 0 Packet was processed by a real connection. * * @retval 1 Packet was handled successfully, but not by a connection. * This may happen with version negotiation and public reset * packets as well as some packets that may be ignored. * * @retval -1 An error occurred. Possible reasons are failure to allocate * memory and invalid @param sa_local in client mode. */ int lsquic_engine_packet_in (lsquic_engine_t *, const unsigned char *packet_in_data, size_t packet_in_size, const struct sockaddr *sa_local, const struct sockaddr *sa_peer, void *peer_ctx, int ecn); /** * Process tickable connections. This function must be called often enough so * that packets and connections do not expire. */ void lsquic_engine_process_conns (lsquic_engine_t *engine); /** * Returns true if engine has some unsent packets. This happens if * @ref ea_packets_out() could not send everything out or if processing * deadline was exceeded (see @ref es_proc_time_thresh). */ int lsquic_engine_has_unsent_packets (lsquic_engine_t *engine); /** * Send out as many unsent packets as possibe: until we are out of unsent * packets or until @ref ea_packets_out() fails. * * If @ref ea_packets_out() does fail cannot send all packets, this * function must be called to signify that sending of packets is possible * again. */ void lsquic_engine_send_unsent_packets (lsquic_engine_t *engine); /** * Destroy engine and all connections and streams in it and free all * memory associated with this engine. */ void lsquic_engine_destroy (lsquic_engine_t *); /** Return max allowed outbound streams less current outbound streams. */ unsigned lsquic_conn_n_avail_streams (const lsquic_conn_t *); /** * Create a new request stream. This causes @ref on_new_stream() callback * to be called. If creating more requests is not permitted at the moment * (due to number of concurrent streams limit), stream creation is registered * as "pending" and the stream is created later when number of streams dips * under the limit again. Any number of pending streams can be created. * Use @ref lsquic_conn_n_pending_streams() and * @ref lsquic_conn_cancel_pending_streams() to manage pending streams. * * If connection is going away, @ref on_new_stream() is called with the * stream parameter set to NULL. */ void lsquic_conn_make_stream (lsquic_conn_t *); /** Return number of delayed streams currently pending */ unsigned lsquic_conn_n_pending_streams (const lsquic_conn_t *); /** Cancel `n' pending streams. Returns new number of pending streams. */ unsigned lsquic_conn_cancel_pending_streams (lsquic_conn_t *, unsigned n); /** * Mark connection as going away: send GOAWAY frame and do not accept * any more incoming streams, nor generate streams of our own. * * Only applicable to HTTP/3 and GQUIC connections. Otherwise a no-op. */ void lsquic_conn_going_away (lsquic_conn_t *); /** * This forces connection close. on_conn_closed and on_close callbacks * will be called. */ void lsquic_conn_close (lsquic_conn_t *); /** * Set whether you want to read from stream. If @param is_want is true, * @ref on_read() will be called when there is readable data in the * stream. If @param is false, @ref on_read() will not be called. * * Returns previous value of this flag. */ int lsquic_stream_wantread (lsquic_stream_t *s, int is_want); /** * Read up to @param len bytes from stream into @param buf. Returns number * of bytes read or -1 on error, in which case errno is set. Possible * errno values: * * EBADF The stream is closed. * ECONNRESET The stream has been reset. * EWOULDBLOCK There is no data to be read. * * Return value of zero indicates EOF. */ ssize_t lsquic_stream_read (lsquic_stream_t *s, void *buf, size_t len); /** * Similar to @ref lsquic_stream_read(), but reads data into @param vec. */ ssize_t lsquic_stream_readv (lsquic_stream_t *s, const struct iovec *vec, int iovcnt); /** * This function allows user-supplied callback to read the stream contents. * It is meant to be used for zero-copy stream processing. * * Return value and errors are same as in @ref lsquic_stream_read(). */ ssize_t lsquic_stream_readf (lsquic_stream_t *s, /** * The callback takes four parameters: * - Pointer to user-supplied context; * - Pointer to the data; * - Data size (can be zero); and * - Indicator whether the FIN follows the data. * * The callback returns number of bytes processed. If this number is zero * or is smaller than `len', reading from stream stops. */ size_t (*readf)(void *ctx, const unsigned char *buf, size_t len, int fin), void *ctx); /** * Set whether you want to write to stream. If @param is_want is true, * @ref on_write() will be called when it is possible to write data to * the stream. If @param is false, @ref on_write() will not be called. * * Returns previous value of this flag. */ int lsquic_stream_wantwrite (lsquic_stream_t *s, int is_want); /** * Write `len' bytes to the stream. Returns number of bytes written, which * may be smaller that `len'. * * A negative return value indicates a serious error (the library is likely * to have aborted the connection because of it). */ ssize_t lsquic_stream_write (lsquic_stream_t *s, const void *buf, size_t len); /** * Like @ref lsquic_stream_write(), but read data from @param vec. */ ssize_t lsquic_stream_writev (lsquic_stream_t *s, const struct iovec *vec, int count); /** * Write to streams using a single call to a preadv-like function. */ ssize_t lsquic_stream_pwritev (lsquic_stream_t *s, ssize_t (*preadv)(void *user_data, const struct iovec *iov, int iovcnt), void *user_data, size_t n_to_write); /** * Used as argument to @ref lsquic_stream_writef() */ struct lsquic_reader { /** * Not a ssize_t because the read function is not supposed to return * an error. If an error occurs in the read function (for example, when * reading from a file fails), it is supposed to deal with the error * itself. */ size_t (*lsqr_read) (void *lsqr_ctx, void *buf, size_t count); /** * Return number of bytes remaining in the reader. */ size_t (*lsqr_size) (void *lsqr_ctx); void *lsqr_ctx; }; /** * Write to stream using @ref lsquic_reader. This is the most generic of * the write functions -- @ref lsquic_stream_write() and * @ref lsquic_stream_writev() utilize the same mechanism. * * @retval Number of bytes written or -1 on error. */ ssize_t lsquic_stream_writef (lsquic_stream_t *, struct lsquic_reader *); /** * Flush any buffered data. This triggers packetizing even a single byte * into a separate frame. Flushing a closed stream is an error. * * @retval 0 Success * @retval -1 Failure */ int lsquic_stream_flush (lsquic_stream_t *s); /** * @typedef lsquic_http_headers_t * @brief HTTP header list structure. Contains a list of HTTP headers in key/value pairs. * used in API functions to pass headers. */ struct lsquic_http_headers { int count; struct lsxpack_header *headers; }; /** * Send headers in @param headers. This function must be called before * writing to the stream. The value of @param eos is ignored in IETF QUIC. */ int lsquic_stream_send_headers (lsquic_stream_t *s, const lsquic_http_headers_t *headers, int eos); /** * Get header set associated with the stream. The header set is created by * @ref hsi_create_header_set() callback. After this call, the ownership of * the header set is transferred to the caller. * * This call must precede calls to @ref lsquic_stream_read() and * @ref lsquic_stream_readv(). * * If the optional header set interface (@ref ea_hsi_if) is not specified, * this function returns NULL. */ void * lsquic_stream_get_hset (lsquic_stream_t *); /** * A server may push a stream. This call creates a new stream in reference * to stream `s'. It will behave as if the client made a request: it will * trigger on_new_stream() event and it can be used as a regular client- * initiated stream. * * `hdr_set' must be set. It is passed as-is to @lsquic_stream_get_hset. * * @retval 0 Stream pushed successfully. * @retval 1 Stream push failed because it is disabled or because we hit * stream limit or connection is going away. * @retval -1 Stream push failed because of an internal error. */ int lsquic_conn_push_stream (lsquic_conn_t *c, void *hdr_set, lsquic_stream_t *s, const lsquic_http_headers_t *headers); /** * Only makes sense in server mode: the client cannot push a stream and this * function always returns false in client mode. */ int lsquic_conn_is_push_enabled (lsquic_conn_t *); /** Possible values for how are 0, 1, and 2. See shutdown(2). */ int lsquic_stream_shutdown(lsquic_stream_t *s, int how); int lsquic_stream_close(lsquic_stream_t *s); /** * Return true if peer has not ACKed all data written to the stream. This * includes both packetized and buffered data. */ int lsquic_stream_has_unacked_data (lsquic_stream_t *s); /** * Get certificate chain returned by the server. This can be used for * server certificate verification. * * The caller releases the stack using sk_X509_free(). */ struct stack_st_X509 * lsquic_conn_get_server_cert_chain (lsquic_conn_t *); /** Returns ID of the stream */ lsquic_stream_id_t lsquic_stream_id (const lsquic_stream_t *s); /** * Returns stream ctx associated with the stream. (The context is what * is returned by @ref on_new_stream callback). */ lsquic_stream_ctx_t * lsquic_stream_get_ctx (const lsquic_stream_t *s); /** * Set user-supplied context associated with the stream. */ void lsquic_stream_set_ctx (lsquic_stream_t *stream, lsquic_stream_ctx_t *ctx); /** Returns true if this is a pushed stream */ int lsquic_stream_is_pushed (const lsquic_stream_t *s); /** * Returns true if this stream was rejected, false otherwise. Use this as * an aid to distinguish between errors. */ int lsquic_stream_is_rejected (const lsquic_stream_t *s); /** * Refuse pushed stream. Call it from @ref on_new_stream. * * No need to call lsquic_stream_close() after this. on_close will be called. * * @see lsquic_stream_is_pushed */ int lsquic_stream_refuse_push (lsquic_stream_t *s); /** * Get information associated with pushed stream: * * @param ref_stream_id Stream ID in response to which push promise was * sent. * @param hdr_set Header set. This object was passed to or generated * by @ref lsquic_conn_push_stream(). * * @retval 0 Success. * @retval -1 This is not a pushed stream. */ int lsquic_stream_push_info (const lsquic_stream_t *, lsquic_stream_id_t *ref_stream_id, void **hdr_set); /** Return current priority of the stream */ unsigned lsquic_stream_priority (const lsquic_stream_t *s); /** * Set stream priority. Valid priority values are 1 through 256, inclusive. * Lower value means higher priority. * * @retval 0 Success. * @retval -1 Priority value is invalid. */ int lsquic_stream_set_priority (lsquic_stream_t *s, unsigned priority); /* * Definitions for Extensible HTTP Priorities: * https://tools.ietf.org/html/draft-ietf-httpbis-priority-01 */ /* This is maximum *value* -- but it's the lowest *priority* */ #define LSQUIC_MAX_HTTP_URGENCY 7 #define LSQUIC_DEF_HTTP_URGENCY 3 #define LSQUIC_DEF_HTTP_INCREMENTAL 0 struct lsquic_ext_http_prio { unsigned char urgency; signed char incremental; }; /** * Get Extensible HTTP Priorities associated with the stream. * * Returns zero on success of a negative value on failure. A failure occurs * if this is not an HTTP/3 stream or if Extensible HTTP Priorities haven't * been enabled. See @ref es_ext_http_prio. */ int lsquic_stream_get_http_prio (lsquic_stream_t *, struct lsquic_ext_http_prio *); /** * Set Extensible HTTP Priorities of the stream. * * Returns zero on success of a negative value on failure. A failure occurs * if some internal error occured or if this is not an HTTP/3 stream or if * Extensible HTTP Priorities haven't been enabled. See @ref es_ext_http_prio. */ int lsquic_stream_set_http_prio (lsquic_stream_t *, const struct lsquic_ext_http_prio *); /** * Get a pointer to the connection object. Use it with lsquic_conn_* * functions. */ lsquic_conn_t * lsquic_stream_conn(const lsquic_stream_t *s); /** Get connection ID */ const lsquic_cid_t * lsquic_conn_id (const lsquic_conn_t *c); /** Get pointer to the engine */ lsquic_engine_t * lsquic_conn_get_engine (lsquic_conn_t *c); int lsquic_conn_get_sockaddr(lsquic_conn_t *c, const struct sockaddr **local, const struct sockaddr **peer); /* Returns previous value */ int lsquic_conn_want_datagram_write (lsquic_conn_t *, int is_want); /* Get minimum datagram size. By default, this value is zero. */ size_t lsquic_conn_get_min_datagram_size (lsquic_conn_t *); /* Set minimum datagram size. This is the minumum value of the buffer passed * to the on_dg_write() callback. */ int lsquic_conn_set_min_datagram_size (lsquic_conn_t *, size_t sz); struct lsquic_logger_if { int (*log_buf)(void *logger_ctx, const char *buf, size_t len); }; /** * Enumerate timestamp styles supported by LSQUIC logger mechanism. */ enum lsquic_logger_timestamp_style { /** * No timestamp is generated. */ LLTS_NONE, /** * The timestamp consists of 24 hours, minutes, seconds, and * milliseconds. Example: 13:43:46.671 */ LLTS_HHMMSSMS, /** * Like above, plus date, e.g: 2017-03-21 13:43:46.671 */ LLTS_YYYYMMDD_HHMMSSMS, /** * This is Chrome-like timestamp used by proto-quic. The timestamp * includes month, date, hours, minutes, seconds, and microseconds. * * Example: 1223/104613.946956 (instead of 12/23 10:46:13.946956). * * This is to facilitate reading two logs side-by-side. */ LLTS_CHROMELIKE, /** * The timestamp consists of 24 hours, minutes, seconds, and * microseconds. Example: 13:43:46.671123 */ LLTS_HHMMSSUS, /** * Date and time using microsecond resolution, * e.g: 2017-03-21 13:43:46.671123 */ LLTS_YYYYMMDD_HHMMSSUS, N_LLTS }; /** * Call this if you want to do something with LSQUIC log messages, as they * are thrown out by default. */ void lsquic_logger_init(const struct lsquic_logger_if *, void *logger_ctx, enum lsquic_logger_timestamp_style); /** * Set log level for all LSQUIC modules. Acceptable values are debug, info, * notice, warning, error, alert, emerg, crit (case-insensitive). * * @retval 0 Success. * @retval -1 Failure: log_level is not valid. */ int lsquic_set_log_level (const char *log_level); /** * E.g. "event=debug" */ int lsquic_logger_lopt (const char *optarg); /** * Return the list of QUIC versions (as bitmask) this engine instance * supports. */ unsigned lsquic_engine_quic_versions (const lsquic_engine_t *); /** * This is one of the flags that can be passed to @ref lsquic_global_init. * Use it to initialize LSQUIC for use in client mode. */ #define LSQUIC_GLOBAL_CLIENT (1 << 0) /** * This is one of the flags that can be passed to @ref lsquic_global_init. * Use it to initialize LSQUIC for use in server mode. */ #define LSQUIC_GLOBAL_SERVER (1 << 1) /** * Initialize LSQUIC. This must be called before any other LSQUIC function * is called. Returns 0 on success and -1 on failure. * * @param flags This a bitmask of @ref LSQUIC_GLOBAL_CLIENT and * @ref LSQUIC_GLOBAL_SERVER. At least one of these * flags should be specified. * * @retval 0 Success. * @retval -1 Initialization failed. * * @see LSQUIC_GLOBAL_CLIENT * @see LSQUIC_GLOBAL_SERVER */ int lsquic_global_init (int flags); /** * Clean up global state created by @ref lsquic_global_init. Should be * called after all LSQUIC engine instances are gone. */ void lsquic_global_cleanup (void); /** * Get QUIC version used by the connection. * * @see lsquic_version */ enum lsquic_version lsquic_conn_quic_version (const lsquic_conn_t *c); /* Return keysize or -1 on error */ int lsquic_conn_crypto_keysize (const lsquic_conn_t *c); /* Return algorithm keysize or -1 on error */ int lsquic_conn_crypto_alg_keysize (const lsquic_conn_t *c); enum lsquic_crypto_ver { LSQ_CRY_QUIC, LSQ_CRY_TLSv13, }; enum lsquic_crypto_ver lsquic_conn_crypto_ver (const lsquic_conn_t *c); /* Return cipher or NULL on error */ const char * lsquic_conn_crypto_cipher (const lsquic_conn_t *c); /** Translate string QUIC version to LSQUIC QUIC version representation */ enum lsquic_version lsquic_str2ver (const char *str, size_t len); /** Translate ALPN (e.g. "h3", "h3-23", "h3-Q046") to LSQUIC enum */ enum lsquic_version lsquic_alpn2ver (const char *alpn, size_t len); /** * This function closes all mini connections and marks all full connections * as going away. In server mode, this also causes the engine to stop * creating new connections. */ void lsquic_engine_cooldown (lsquic_engine_t *); /** * Get user-supplied context associated with the connection. */ lsquic_conn_ctx_t * lsquic_conn_get_ctx (const lsquic_conn_t *); /** * Set user-supplied context associated with the connection. */ void lsquic_conn_set_ctx (lsquic_conn_t *, lsquic_conn_ctx_t *); /** * Get peer context associated with the connection. */ void * lsquic_conn_get_peer_ctx (lsquic_conn_t *, const struct sockaddr *local_sa); /** Get SNI sent by the client */ const char * lsquic_conn_get_sni (lsquic_conn_t *); /** * Abort connection. */ void lsquic_conn_abort (lsquic_conn_t *); /** * Helper function: convert list of versions as specified in the argument * bitmask to string that can be included as argument to "v=" part of the * Alt-Svc header. * * For example (1< "37,38" * * This is only applicable to Google QUIC versions. */ const char * lsquic_get_alt_svc_versions (unsigned versions); /** * Return a NULL-terminated list of HTTP/3 ALPNs, e.g "h3-17", "h3-18", "h3". */ const char *const * lsquic_get_h3_alpns (unsigned versions); /** * Returns true if provided buffer could be a valid handshake-stage packet, * false otherwise. Do not call this function if a connection has already * been established: it will return incorrect result. */ int lsquic_is_valid_hs_packet (lsquic_engine_t *, const unsigned char *, size_t); /** * Parse cid from packet stored in `buf' and store it to `cid'. Returns 0 * on success and -1 on failure. */ int lsquic_cid_from_packet (const unsigned char *, size_t bufsz, lsquic_cid_t *cid); /** * On success, offset to the CID is returned (a non-negative value). * `cid_len' is set to the length of the CID. The server perspective * is assumed. `server_cid_len' is set to the length of the CIDs that * server generates. * * On failure, a negative value is returned. */ int lsquic_dcid_from_packet (const unsigned char *, size_t bufsz, unsigned server_cid_len, unsigned *cid_len); /** * Returns true if there are connections to be processed, false otherwise. * If true, `diff' is set to the difference between the earliest advisory * tick time and now. If the former is in the past, the value of `diff' * is negative. */ int lsquic_engine_earliest_adv_tick (lsquic_engine_t *engine, int *diff); /** * Return number of connections whose advisory tick time is before current * time plus `from_now' microseconds from now. `from_now' can be negative. */ unsigned lsquic_engine_count_attq (lsquic_engine_t *engine, int from_now); enum LSQUIC_CONN_STATUS { LSCONN_ST_HSK_IN_PROGRESS, LSCONN_ST_CONNECTED, LSCONN_ST_HSK_FAILURE, LSCONN_ST_GOING_AWAY, LSCONN_ST_TIMED_OUT, /* If es_honor_prst is not set, the connection will never get public * reset packets and this flag will not be set. */ LSCONN_ST_RESET, LSCONN_ST_USER_ABORTED, LSCONN_ST_ERROR, LSCONN_ST_CLOSED, LSCONN_ST_PEER_GOING_AWAY, LSCONN_ST_VERNEG_FAILURE, }; enum LSQUIC_CONN_STATUS lsquic_conn_status (lsquic_conn_t *, char *errbuf, size_t bufsz); extern const char *const lsquic_ver2str[N_LSQVER]; /* Return connection associated with this SSL object */ lsquic_conn_t * lsquic_ssl_to_conn (const struct ssl_st *); /* Return session resumption information that can be used on subsequenct * connection as argument to lsquic_engine_connect(). Call from inside * SSL's new session callback. * * Returns 0 on success. In this case, `buf' is made to point to newly * allocated memory containing `buf_sz' bytes. It is the caller's * responsibility to free the memory. */ int lsquic_ssl_sess_to_resume_info (struct ssl_st *, struct ssl_session_st *, unsigned char **buf, size_t *buf_sz); #ifdef __cplusplus } #endif #endif //__LSQUIC_H__