1) After handshake done, handshake packets should not be sent or received.
2) IFC_ACK_QUED_HSK will be cancelled from conn->ifc_flags after handshake done, but it maybe set again if ACKs for handshake lost(Function: should_generate_ack).
Co-authored-by: ivanfywang <ivanfywang@gmail.com>
- [FEATURE] Added support for sending/receiving multiple headers to address the
case related to "100 continue" header handling.
- [BUGFIX] Addressed high CPU usage for a GOAWAY connection before sending
CONNECTION_CLOSE.
- [BUGFIX] Addressed SIGFPE due to zero pacing rate. (ISSUE #254).
- [BUGFIX] Fixed a minor issue related to multi-paths.
- [FEATURE] QUIC and HTTP/3 Internet Draft 34 support and v1 support.
The latter is turned off by default.
- Drop support for ID-28 and ID-32.
- [BUGFIX] IETF QUIC mini conn receive history (trechist): allow
unlimited inserts by dropping smallest elements.
- [BUGFIX] gQUIC: set STTL to correct value, issue #226.
- [BUGFIX] Account for poison packet gap when MTU probe was too large.
- [BUGFIX] Assertion in send controller when path validation fails.
- [BUGFIX] Assertion in BBR when sending out-of-order packets is
detected.
- [BUGFIX] Drop overflow receive history ranges when cloning.
- Log correct size of the incoming packet.
- Fix internal stream function.
- [BUGFIX] gQUIC: do not destroy critical streams when connection is
closed. See issue #201.
- [BUGFIX] Drop #if LSQUIC_CONN_STATS from lsquic.h. See issue #211.
- [BUGFIX] Challenge cancellation when path validation fails.
- [BUGFIX] Do not send FIN if RST is scheduled to be sent on a stream.
- [BUGFIX] gQUIC's is_tickable() when connection is closing.
- [BUGFIX] Q050 processing of GOAWAY frames.
- [API] New knob to set outgoing packet batch size.
- Aborted connection now become tickable immediately.
- Abort connection when HTTP/3 frame cannot be opened (can only happen
when malloc fails).
- [BUGFIX] Do not drop incoming data when STOP_SENDING is received.
- [BUGFIX] Receipt of STOP_SENDING should not cause read-reset.
- [BUGFIX] Allow stream writes after receiving RESET.
- [BUGFIX] Typo in stream: ANDing enum with wrong flag.
- [BUGFIX] Reset elision: do not use zero as special stream ID value,
for zero is a valid stream ID in IETF QUIC.
- [API] Add optional on_conncloseframe_received() callback.
- Use zero error code in RESET stream sent in response to STOP_SENDING.
- [OPTIMIZATION] Adjust packet reordering threshold when spurious losses
are detected.
- [API] Pass pointer to local sockaddr to ea_get_ssl_ctx() callback.
- [BUGFIX] Check whether ECN counts are set in ACK struct before using them.
- [BUGFIX] Calculate TLP timer correctly when only one packet is in flight.
- [BUGFIX] Min RTO delay is 200 milliseconds, not 1 second.
- [BUGFIX] Memory leak in QPACK decoder handler: discard hset when necessary.
- Allow retired and drained CIDs to be reused after a timeout.
- [BUGFIX] Get rough RTT estimate on receipt of Handshake packet.
This prevents BBR on the client from miscalculating pacing rate,
slowing down sending of ACK packets.
- [BUGFIX] Packets sent during handshake are app-limited.
- [BUGFIX] Bandwidth sampler starts in app-limited mode.
- [BUGFIX] Memory leak: free QPACK handler context in stream dtor.
- Logging improvements.
- [BUGFIX] Allow peer to migrate when its SCID is zero-length.
- [BUGFIX] PADDING size calculation: only one Short packet can be
coalesced. (This should have been part of the fix in 2.24.1).
- Abort connect if received NEW_CONNECTION_ID but current DCID is
zero-length.
- Improve log messages
- [API] Allow use of ea_get_ssl_ctx() on the client (optional). PR #186.
- [BUGFIX] Expand datagram with ack-eliciting Initial to 1200 bytes
after connection promotion.
- [BUGFIX] Discard CRYPTO frames from lower encryption levels after
connection promotion.
- [BUGFIX] Cancel path response if path could not be initialized.
- [FEATURE] QUIC and HTTP/3 Internet Draft 31 support. Drop ID-30
and ID-31 support.
- [BUGFIX] Divide-by-zero in newly enabled conn stats code when no
packets were sent.
- [BUGFIX] Memory leak in gQUIC client when server hello cannot be
parsed.
- [BUGFIX] Server Initial packet size calculation.
- Log user-agent and CONN_CLOSE reason when peer reports error.
- Example programs: Specify ALPN for echo and md5 clients and servers
(issue #184).
- Example programs: Don't add "QUIC_" prefix to lines in keylog file
(issue #185).
- http_server: Fix fd leak in preadv mode; fix preadv() usage when
reading from disk.
- Add QPACK stats collection and experimentation mode, see the new
es_qpack_experiment setting.
- Log busy connection stats every second using the new "conn-stats"
log module.
- Log about skipping only once.
- Update HTTP/3 greased frame type formula.
- Use ls-qpack v2.2.1.
- [FEATURE] IETF Client 0-RTT support.
- [BUGFIX] Do not schedule MTU probe on first tick.
- [BUGFIX] Parsing DATAGRAM frame.
- [BUGFIX] If push promise fails, do not invoke hset destructor.
- [BUGFIX] Client: When connections are IDed by port number, check DCID.
Fixes issue #176.
- Revert the 2.22.1 lsquic_is_valid_hs_packet change. All that was
necessary is a change to the way we call it in lsquic_engine. No
change to the function itself is required.
- [FEATURE] Extensible HTTP Priorities (HTTP/3 only).
- [FEATURE] Add conn context to packet-out memory interface (PR #175).
- [BUGFIX] gQUIC proof generation: allocate buffer big enough for
signature (issue #173).
- [BUGFIX] Make library thread-safe: drop use of global variables
(issue #133, issue #167).
- [BUGFIX] Deactivate only *recent* HQ frame, not any HQ frame.
- [BUGFIX] gQUIC server: associate compressed cert with SSL_CTX,
instead of keeping them in a separate hash, potentially leading
to mismatches.
- [BUGFIX] Stream data discard infinite loop: break on FIN.
- cmake: add install target via -DCMAKE_INSTALL_PREFIX (PR #171).
- Support randomized packet number to begin a connection.
- Mini and full IETF connection size optimization.
- http_client: specify HTTP priorities based on stream conditions.
- [FEATURE] QUIC and HTTP/3 Internet Draft 30 support.
- [FEATURE] Unreliable Datagram Extension support.
- [FEATURE] Adaptive congestion controller.
- [BUGFIX] Do not send MAX_STREAM_DATA frames on crypto streams.
- [BUGFIX] Fail with CRYPTO_BUFFER_EXCEEDED when too much CRYPTO
data comes in.
- [BUFFIX] Spin bit is now strictly per path; value is reset on
DCID change.
- [BUGFIX] Check that max value of max_streams_uni and
max_streams_bidi TPs is 2^60.
- [BUGFIX] Close IETF mini conn immediately if crypto session
cannot be initialized.
- Deprecate ID-28 (no browser uses it): it's no longer in the
default versions list.
- New programs duck_server and duck_client that implement the
experimental siduck-00 protocol. They quack!
- IETF crypto streams: don't limit ourselves from sending.
- Command-line programs: turn off QL loss bits if -G is used, as
Wireshark cannot decrypt QUIC packets when this extension is used.
- Turn all h3 framing unit tests back on.
- Fix malo initialization when compiled in no-pool mode.
- [FEATURE] Add lsquic_stream_pwritev(). This function allows one to
reduce the number of system calls required to read a file from disk
by using lsquic_stream_pwritev() together with preadv(2).
- [BUGFIX] When stream is reset, it is writeable -- let user collect
the error.
- [BUGFIX] Calculate correct conn flow control if reading ends early.
- [BUGFIX] Remove stream from read and write queues on internal
shutdown. This is a regression introduced in 2.19.7.
- [BUGFIX] Swapped arguments in IETF RESET_FRAME generation.
- Turn off mini conn history when compiling with Visual Studio; this
allows the project to compile on Windows again.
- http_client: Add -3 flag to stop reading from streams early; code
cleanup.
- Don't use -Werror.
- [FEATURE] Update the timestamp extension to latest version.
- [FEATURE] Cope with appearance of ECN blackholes.
- [OPTIMIZATION] return packno offset and size when header is generated.
- [BUGFIX] ignore old ACK frames in mini conns.
- [BUGFIX] Mark initial server path as initialized.
- [BUGFIX] Do not merge ACK if ECN counts do not match.
- Turn incoming packet number history in mini conn back on.
- Record mini conn event history again when compiled in debug mode.
- IETF mini conn: log when ACK is queued.
- Clean up and refactor code in several places.
- Handle ECT-CE event: issue a loss event.
- Log the fact that we ignore SETTINGS_MAX_HEADER_LIST_SIZE.
- Use Max Push ID in GOAWAY frame to cancel promises.
- Add support for HTTP/3 CANCEL_PUSH frame.
- lsquic_stream_is_pushed: streams without headers are never pushed.
- [BUGFIX] Regression in lsquic_stream_shutdown_internal: now it shuts down.
- Improve logic whether to generate CONNECTION_CLOSE.
- [FEATURE] DPLPMTUD support. IETF connections now search for the
maximum packet size, improving throughput.
- [DEBUG] Record event in stream history when on_close() is called
in dtor.
- [FEATURE] QUIC and HTTP/3 Internet Draft 29 support.
- [BUGFIX] Check that scheduled packets are also sendable when
calculating a connection's "tickable" property.
- [BUGFIX] Don't count scheduled packets as in-flight when pacer is
checked on tick.
- gQUIC: delay calling on_new for pushed stream until headers are
available.
- Allow nested calls to lsquic_engine_connect().
- [FEATURE] Use "no-progress timeout" after which connection is closed.
- [BUGFIX] Select new SCID when current SCID is retired.
- [BUGFIX] Don't warn about dropped Initial packet sequence gaps during
mini/full handoff.
- [BUGFIX] Send correct conn error when HTTP/3 frame is truncated.
- [BUGFIX] Mini conn: consider amplification when deciding to return
TICK_SEND.
- [BUGFIX] Don't double-count tag length in amplification logic.
- [BUGFIX] Don't squeeze out lone path challenges.
- [BUGFIX] Log messages dealing with scheduled packet queue squeezing.
- [BUGFIX] don't wipe current path if no path challenge responses
come back.
- [BUGFIX] When path is reset, don't lose path_id which is used for
logging.
- Downgrade flow control violations to info log level from warnings.
- Fix connection cap extra check, avoid checks in nested calls.
- Fix some unit tests when extra checks are enabled.
- Use ls-hpack 2.2.1.
- Turn off unconditional extra checks for IETF clients.
- Extra checks: don't verify sent size of hello packets. Client
changes DCID length and this check will fail.
- [BUGFIX] Fix amplification mitigation in 0-RTT case.
- [BUGFIX] IETF mini connection should not tickable if cannot send
a packet due to amplification.
- [BUGFIX] Fail if active_connection_id_limit TP is smaller than 2.
- [BUGFIX] Qlog server certificates for IETF QUIC connections.
- [BUGFIX] Uninitialized struct padding usage in tokgen (benign).
- [BUGFIX] Incorrect argument to shi_lookup() (benign).
- [API] Use lsxpack_header structure to process incoming headers.
- [BUGFIX] Fix assertion when zero-padding Initial packet.
- [BUGFIX] Use idle timeout before we learn of peer's value.
- Use ls-hpack 2.0.0 -- has lsxpack_header changes.
- Use ls-qpack 0.14.0 -- new, common with ls-hpack, XXH seed (not used yet).
- Code cleanup: prefix exported functions with "lsquic_".
- [BUGFIX] Do not delay ACKs for Initial and Handshake packets.
- [BUGFIX] Send PATH_CHALLENGE if path changed before mini conn promotion.
- Logging improvements.
- http_client: discard data faster.
- [BUGFIX] Coalesced packets could get longer than normal packet size.
- Add spin bit configuration option es_spin (-o spin=[01]).
- Disable spin bit in 1/16 of connections.
- Improve logging a bit.
George Wang
wangfuyu
Dmitri Tikhonov
Bas van den Berg