RFC9000 3.5.
A STOP_SENDING frame requests that the receiving endpoint send a RESET_STREAM frame. An endpoint that receives a STOP_SENDING frame MUST send a RESET_STREAM frame if the stream is in the "Ready" or "Send" state. If the stream is in the "Data Sent" state, the endpoint MAY defer sending the RESET_STREAM frame until the packets containing outstanding data are acknowledged or declared lost. If any outstanding data is declared lost, the endpoint SHOULD send a RESET_STREAM frame instead of retransmitting the data.
RFC9000 19.4. RESET_Frames
An endpoint uses a RESET_STREAM frame (type=0x04) to abruptly terminate the sending part of a stream.
Co-authored-by: wangfuyu <wangfuyu@gmail.com>
- [FEATURE] Added support for sending/receiving multiple headers to address the
case related to "100 continue" header handling.
- [BUGFIX] Addressed high CPU usage for a GOAWAY connection before sending
CONNECTION_CLOSE.
- [BUGFIX] Addressed SIGFPE due to zero pacing rate. (ISSUE #254).
- [BUGFIX] Fixed a minor issue related to multi-paths.
- [BUGFIX] Infinite loop in stream: returned HQ frame can be at any
point on the list.
- [BUGFIX] Fail push promise immediately if STREAM_NOPUSH is set.
- [BUGFIX] Do not send RESET_STREAM if writing to stream is already
finished.
- perf_client: wait for all ACKs before exiting.
- Improve how generated RESET_STREAM is logged.
- Fix compilation in different combos of adv_tick/conn_stats flags.
- Move qpack warning disablement into src/liblsquic/CMakeLists.txt.
- [FEATURE] QUIC and HTTP/3 Internet Draft 34 support and v1 support.
The latter is turned off by default.
- Drop support for ID-28 and ID-32.
- [BUGFIX] IETF QUIC mini conn receive history (trechist): allow
unlimited inserts by dropping smallest elements.
- [BUGFIX] gQUIC: set STTL to correct value, issue #226.
- [BUGFIX] Account for poison packet gap when MTU probe was too large.
- [API] lsquic_ssl_sess_to_resume_info() is the new way to get
session info.
- [API] Add user pointer to ea_generate_scid callback.
- [API] Add lsquic_dcid_from_packet() -- a fast function to parse
out DCID.
- [API] Add es_max_batch_size to control outgoing packet batch size.
- [BUGFIX] Disallow sending of header while promise is being written.
- [BUGFIX] Flush stream when buffered bytes exhaust stream cap.
- [BUGFIX] Deactivate HQ frame if writing push promise fails.
- Perform sanity check on peer transport parameters and fail the
handshake if some flow control limits are too low. This can be
turned off, see es_check_tp_sanity.
- http_server: fix how requests are read in "hq" mode.
- [BUGFIX] Replace dispatch read/write events assertion with a check.
- [BUGFIX] gQUIC connection close: there is no HEADERS stream without
HTTP flag, see issue #220.
- http_client, http_server: add hq protocol support and other flags
for use with QUIC Interop Runner.
- Fix: use IP_PMTUDISC_PROBE (not IP_PMTUDISC_DO) on Linux to set
Don't-Fragment flag on outgoing packets.
- Fix send_packets_one_by_one on Windows platform when sending
multiple iovs, see issue #218.
- Exit echo_client on Windows immediately, see issue #219.
- [BUGFIX] Assertion in send controller when path validation fails.
- [BUGFIX] Assertion in BBR when sending out-of-order packets is
detected.
- [BUGFIX] Drop overflow receive history ranges when cloning.
- Log correct size of the incoming packet.
- Fix internal stream function.
- [BUGFIX] gQUIC: do not destroy critical streams when connection is
closed. See issue #201.
- [BUGFIX] Drop #if LSQUIC_CONN_STATS from lsquic.h. See issue #211.
- [BUGFIX] Challenge cancellation when path validation fails.
- [BUGFIX] Do not send FIN if RST is scheduled to be sent on a stream.
- [BUGFIX] gQUIC's is_tickable() when connection is closing.
- [BUGFIX] Q050 processing of GOAWAY frames.
- [API] New knob to set outgoing packet batch size.
- Aborted connection now become tickable immediately.
- Abort connection when HTTP/3 frame cannot be opened (can only happen
when malloc fails).
- [BUGFIX] Do not drop incoming data when STOP_SENDING is received.
- [BUGFIX] Receipt of STOP_SENDING should not cause read-reset.
- [BUGFIX] Allow stream writes after receiving RESET.
- [BUGFIX] Typo in stream: ANDing enum with wrong flag.
- [BUGFIX] Reset elision: do not use zero as special stream ID value,
for zero is a valid stream ID in IETF QUIC.
- [API] Add optional on_conncloseframe_received() callback.
- Use zero error code in RESET stream sent in response to STOP_SENDING.
- [API, FEATURE] Add es_delay_onclose option to delay on_close until all
data is ACKed. Use new function lsquic_stream_has_unacked_data() to
learn whether peer acknowledged all data written to stream.
- [API] Add optional on_reset() stream callback to get notifications
when RESET or STOP_SENDING frames are received.
- [BUGFIX] On STOP_SENDING, make conn tickable is _writeable_, not
readable.
- [BUGFIX] Check whether ECN counts are set in ACK struct before using them.
- [BUGFIX] Calculate TLP timer correctly when only one packet is in flight.
- [BUGFIX] Min RTO delay is 200 milliseconds, not 1 second.
- [BUGFIX] Memory leak in QPACK decoder handler: discard hset when necessary.
- Allow retired and drained CIDs to be reused after a timeout.
- [BUGFIX] Get rough RTT estimate on receipt of Handshake packet.
This prevents BBR on the client from miscalculating pacing rate,
slowing down sending of ACK packets.
- [BUGFIX] Packets sent during handshake are app-limited.
- [BUGFIX] Bandwidth sampler starts in app-limited mode.
- [BUGFIX] Memory leak: free QPACK handler context in stream dtor.
- Logging improvements.
- [BUGFIX] Allow peer to migrate when its SCID is zero-length.
- [BUGFIX] PADDING size calculation: only one Short packet can be
coalesced. (This should have been part of the fix in 2.24.1).
- Abort connect if received NEW_CONNECTION_ID but current DCID is
zero-length.
- Improve log messages
- [FEATURE] QUIC and HTTP/3 Internet Draft 31 support. Drop ID-30
and ID-31 support.
- [BUGFIX] Divide-by-zero in newly enabled conn stats code when no
packets were sent.
- [BUGFIX] Memory leak in gQUIC client when server hello cannot be
parsed.
- [BUGFIX] Server Initial packet size calculation.
- Log user-agent and CONN_CLOSE reason when peer reports error.
- Example programs: Specify ALPN for echo and md5 clients and servers
(issue #184).
- Example programs: Don't add "QUIC_" prefix to lines in keylog file
(issue #185).
- http_server: Fix fd leak in preadv mode; fix preadv() usage when
reading from disk.
- [FEATURE] IETF Client 0-RTT support.
- [BUGFIX] Do not schedule MTU probe on first tick.
- [BUGFIX] Parsing DATAGRAM frame.
- [BUGFIX] If push promise fails, do not invoke hset destructor.
- [BUGFIX] Client: When connections are IDed by port number, check DCID.
Fixes issue #176.
- Revert the 2.22.1 lsquic_is_valid_hs_packet change. All that was
necessary is a change to the way we call it in lsquic_engine. No
change to the function itself is required.
- [FEATURE] Extensible HTTP Priorities (HTTP/3 only).
- [FEATURE] Add conn context to packet-out memory interface (PR #175).
- [BUGFIX] gQUIC proof generation: allocate buffer big enough for
signature (issue #173).
- [BUGFIX] Make library thread-safe: drop use of global variables
(issue #133, issue #167).
- [BUGFIX] Deactivate only *recent* HQ frame, not any HQ frame.
- [BUGFIX] gQUIC server: associate compressed cert with SSL_CTX,
instead of keeping them in a separate hash, potentially leading
to mismatches.
- [BUGFIX] Stream data discard infinite loop: break on FIN.
- cmake: add install target via -DCMAKE_INSTALL_PREFIX (PR #171).
- Support randomized packet number to begin a connection.
- Mini and full IETF connection size optimization.
- http_client: specify HTTP priorities based on stream conditions.
- [FEATURE] QUIC and HTTP/3 Internet Draft 30 support.
- [FEATURE] Unreliable Datagram Extension support.
- [FEATURE] Adaptive congestion controller.
- [BUGFIX] Do not send MAX_STREAM_DATA frames on crypto streams.
- [BUGFIX] Fail with CRYPTO_BUFFER_EXCEEDED when too much CRYPTO
data comes in.
- [BUFFIX] Spin bit is now strictly per path; value is reset on
DCID change.
- [BUGFIX] Check that max value of max_streams_uni and
max_streams_bidi TPs is 2^60.
- [BUGFIX] Close IETF mini conn immediately if crypto session
cannot be initialized.
- Deprecate ID-28 (no browser uses it): it's no longer in the
default versions list.
- New programs duck_server and duck_client that implement the
experimental siduck-00 protocol. They quack!
- IETF crypto streams: don't limit ourselves from sending.
- Command-line programs: turn off QL loss bits if -G is used, as
Wireshark cannot decrypt QUIC packets when this extension is used.
- Turn all h3 framing unit tests back on.
- Fix malo initialization when compiled in no-pool mode.
- [FEATURE] Add lsquic_stream_pwritev(). This function allows one to
reduce the number of system calls required to read a file from disk
by using lsquic_stream_pwritev() together with preadv(2).
- [BUGFIX] When stream is reset, it is writeable -- let user collect
the error.
- [BUGFIX] Calculate correct conn flow control if reading ends early.
- [BUGFIX] Remove stream from read and write queues on internal
shutdown. This is a regression introduced in 2.19.7.
- [BUGFIX] Swapped arguments in IETF RESET_FRAME generation.
- Turn off mini conn history when compiling with Visual Studio; this
allows the project to compile on Windows again.
- http_client: Add -3 flag to stop reading from streams early; code
cleanup.
- Don't use -Werror.
- Handle ECT-CE event: issue a loss event.
- Log the fact that we ignore SETTINGS_MAX_HEADER_LIST_SIZE.
- Use Max Push ID in GOAWAY frame to cancel promises.
- Add support for HTTP/3 CANCEL_PUSH frame.
- lsquic_stream_is_pushed: streams without headers are never pushed.
- [BUGFIX] Regression in lsquic_stream_shutdown_internal: now it shuts down.
- Improve logic whether to generate CONNECTION_CLOSE.
- [FEATURE] DPLPMTUD support. IETF connections now search for the
maximum packet size, improving throughput.
- [DEBUG] Record event in stream history when on_close() is called
in dtor.
- [FEATURE] Implement the "QUIC bit grease" extension.
- [BUGFIX] Selecting CID used for logging on client.
- [BUGFIX] Header protection assertion.
- [BUGFIX] Server: enable SSL key logging when cert lookup callback
is not set.
- Remove some dead code.
- [FEATURE] QUIC and HTTP/3 Internet Draft 29 support.
- [BUGFIX] Check that scheduled packets are also sendable when
calculating a connection's "tickable" property.
- [BUGFIX] Don't count scheduled packets as in-flight when pacer is
checked on tick.
- gQUIC: delay calling on_new for pushed stream until headers are
available.
- Allow nested calls to lsquic_engine_connect().
- [BUGFIX] ID-28: do not use TLS middlebox compatibility mode in
ClientHello. This change requires using a newer version of BoringSSL.
- [BUGFIX] Free connections in Advisory Tick Time Queue in engine dtor.
- [BUGFIX] IETF QUIC client: narrow migration check to a single path.
- [BUGFIX] NULL dereference: set function pointers for alarm for path
challenges 2 and 3.
- [BUGFIX] HTTP/3 headers may be followed immediately by trailers.
- [BUGFIX] Log messages when SCID changes.
- [FEATURE] Use "no-progress timeout" after which connection is closed.
- [BUGFIX] Select new SCID when current SCID is retired.
- [BUGFIX] Don't warn about dropped Initial packet sequence gaps during
mini/full handoff.
- [BUGFIX] Send correct conn error when HTTP/3 frame is truncated.
- [BUGFIX] Mini conn: consider amplification when deciding to return
TICK_SEND.
- [BUGFIX] Don't double-count tag length in amplification logic.
- [BUGFIX] Don't squeeze out lone path challenges.
- [BUGFIX] Log messages dealing with scheduled packet queue squeezing.
- [BUGFIX] don't wipe current path if no path challenge responses
come back.
- [BUGFIX] When path is reset, don't lose path_id which is used for
logging.
- Downgrade flow control violations to info log level from warnings.
- Fix connection cap extra check, avoid checks in nested calls.
- Fix some unit tests when extra checks are enabled.
- Use ls-hpack 2.2.1.
- Turn off unconditional extra checks for IETF clients.
- Extra checks: don't verify sent size of hello packets. Client
changes DCID length and this check will fail.
- [BUGFIX] Heed es_rw_once for pushed HTTP/3 streams.
- [BUGFIX] IETF client: set correct flags on bidirectional streams.
- [BUGFIX] Generate Cancel Stream QPACK instructions for abandoned
streams.
- [BUGFIX] Do not call header callbacks after stream is closed.
- Use ls-qpack 2.1.1
- [API] Use lsxpack_header structure to process incoming headers.
- [BUGFIX] Fix assertion when zero-padding Initial packet.
- [BUGFIX] Use idle timeout before we learn of peer's value.
- Use ls-hpack 2.0.0 -- has lsxpack_header changes.
- Use ls-qpack 0.14.0 -- new, common with ls-hpack, XXH seed (not used yet).
- Code cleanup: prefix exported functions with "lsquic_".
- [FEATURE] QUIC and HTTP/3 Internet Draft 27 support.
- [FEATURE] Add experimental delayed ACKs extension.
- Drop support for Internet Draft 24.
- Code cleanup.
- [API] Drop support for Q039.
- Improve ACK-queuing logic. Send an ACK once in a while if
peer keeps on sending non-ack-eliciting packets.
- Improve Alt-Svc string: Q050 and later are not included in
the old-style "quic" string.
- Send stateless resets if connection could not be promoted.
- Schedule MAX_DATA if needed when DATA_BLOCKED is received.
- Use ls-qpack 0.11.2 -- needed for server push optimization.
- Code cleanup: handle some error cases, improve logging.
George Wang
wangfuyu
Dmitri Tikhonov