hyperdriveguy/tilt-table-arduino
2
1
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Fix serial comms

Browse source
This commit is contained in:
Hyperdriveguy 2022-03-31 21:55:24 -06:00
parent 6f5f32b1ca
commit 8fa0623d74
No known key found for this signature in database
GPG key ID: 98EF9800B7CC9E23
1 changed files with 27 additions and 28 deletions
Download patch file Download diff file Expand all files Collapse all files

55
arduino_controller/arduino_controller.ino
View file

@ -1,9 +1,3 @@
/* Funduino Joystick Shield Example
This program simply captures all of the inputs of the Funduino Joystick Shield buttons and
joystick every second and displays them in the Serial Monitor Window.
The Arduino pins below are defined by the shield and cannot be changed.
*/
int const UP_BTN = 2; int const UP_BTN = 2;
int const DOWN_BTN = 4; int const DOWN_BTN = 4;
int const LEFT_BTN = 5; int const LEFT_BTN = 5;
@ -14,29 +8,34 @@ int const JOYSTICK_BTN = 8;
int const JOYSTICK_AXIS_X = A0; int const JOYSTICK_AXIS_X = A0;
int const JOYSTICK_AXIS_Y = A1; int const JOYSTICK_AXIS_Y = A1;
int buttons[] = {UP_BTN, DOWN_BTN, LEFT_BTN, RIGHT_BTN, E_BTN, F_BTN, JOYSTICK_BTN}; int buttons[] = {UP_BTN, DOWN_BTN, LEFT_BTN, RIGHT_BTN, E_BTN, F_BTN, JOYSTICK_BTN};
//=============================================================================== int line = 1;
// Initialization
//===============================================================================
void setup() { void setup() {
//Set all button pins as inputs with internal pullup resistors enabled.
for (int i; i < 7; i++) pinMode(buttons[i], INPUT_PULLUP);
Serial.begin(9600); Serial.begin(9600);
Serial.println("Serial Started");
for (int i=0; i < 7; i++) pinMode(buttons[i], INPUT_PULLUP);
Serial.println("Finished pin setup");
delay(2000);
} }
//===============================================================================
// Main
//===============================================================================
void loop() { void loop() {
// Check each button input and print the status to the Serial Monitor Window Serial.print(line);
Serial.print("UP="),Serial.print(digitalRead(UP_BTN)); Serial.print(". Yeet!\n");
Serial.print("\tDOWN="),Serial.print(digitalRead(DOWN_BTN));
Serial.print("\tLEFT="),Serial.print(digitalRead(LEFT_BTN)); Serial.print("UP="),Serial.println(digitalRead(UP_BTN));
Serial.print("\tRIGHT="),Serial.print(digitalRead(RIGHT_BTN)); Serial.print("DOWN="),Serial.println(digitalRead(DOWN_BTN));
Serial.print("\tE="),Serial.print(digitalRead(E_BTN)); Serial.print("LEFT="),Serial.println(digitalRead(LEFT_BTN));
Serial.print("\tF="),Serial.print(digitalRead(F_BTN)); Serial.print("RIGHT="),Serial.println(digitalRead(RIGHT_BTN));
Serial.print("\tJOYSTICK BTN="),Serial.print(digitalRead(JOYSTICK_BTN)); Serial.print("E="),Serial.println(digitalRead(E_BTN));
Serial.print("F="),Serial.println(digitalRead(F_BTN));
// Print the full X/Y joystick values (0-1023) Serial.print("JOYSTICK BTN="),Serial.println(digitalRead(JOYSTICK_BTN));
Serial.print("\tX="),Serial.print(analogRead(JOYSTICK_AXIS_X));
Serial.print("\tY="),Serial.println(analogRead(JOYSTICK_AXIS_Y)); // Joystick range is from 0 to 653 +- 1
delay(250); // Center is about 323 +- 2. A deadzone of 10 or 20 should be safe.
} Serial.print("X: ");
Serial.println(analogRead(JOYSTICK_AXIS_X));
Serial.print("Y: ");
Serial.println(analogRead(JOYSTICK_AXIS_Y));
line++;
delay(150);
}