wownero/tests/unit_tests/output_selection.cpp
Kevin Barbour 85db1734e7
Remove unused variables in monero codebase
There are quite a few variables in the code that are no longer
(or perhaps never were) in use. These were discovered by enabling
compiler warnings for unused variables and cleaning them up.

In most cases where the unused variables were the result
of a function call the call was left but the variable
assignment removed, unless it was obvious that it was
a simple getter with no side effects.
2021-02-09 08:05:05 +01:00

220 lines
7.2 KiB
C++

// Copyright (c) 2014-2020, The Monero Project
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification, are
// permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this list of
// conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice, this list
// of conditions and the following disclaimer in the documentation and/or other
// materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its contributors may be
// used to endorse or promote products derived from this software without specific
// prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// FIXME: move this into a full wallet2 unit test suite, if possible
#include "gtest/gtest.h"
#include "wallet/wallet2.h"
#include <string>
static tools::wallet2::transfer_container make_transfers_container(size_t N)
{
tools::wallet2::transfer_container transfers;
for (size_t n = 0; n < N; ++n)
{
transfers.push_back(AUTO_VAL_INIT(tools::wallet2::transfer_details()));
tools::wallet2::transfer_details &td = transfers.back();
td.m_block_height = 1000;
td.m_spent = false;
td.m_txid = crypto::null_hash;
td.m_txid.data[0] = n & 0xff;
td.m_txid.data[1] = (n >> 8) & 0xff;
td.m_txid.data[2] = (n >> 16) & 0xff;
td.m_txid.data[3] = (n >> 24) & 0xff;
}
return transfers;
}
#define SELECT(idx) \
do { \
auto i = std::find(unused_indices.begin(), unused_indices.end(), idx); \
ASSERT_TRUE(i != unused_indices.end()); \
unused_indices.erase(i); \
selected.push_back(idx); \
} while(0)
#define PICK(expected) \
do { \
size_t idx = w.pop_best_value_from(transfers, unused_indices, selected); \
ASSERT_EQ(expected, idx); \
selected.push_back(idx); \
} while(0)
TEST(select_outputs, one_out_of_N)
{
tools::wallet2 w;
// check that if there are N-1 outputs of the same height, one of them
// already selected, the next one selected is the one that's from a
// different height
tools::wallet2::transfer_container transfers = make_transfers_container(10);
transfers[6].m_block_height = 700;
std::vector<size_t> unused_indices({0, 1, 2, 3, 4, 5, 6, 7, 8, 9});
std::vector<size_t> selected;
SELECT(2);
PICK(6);
}
TEST(select_outputs, order)
{
tools::wallet2 w;
// check that most unrelated heights are picked in order
tools::wallet2::transfer_container transfers = make_transfers_container(5);
transfers[0].m_block_height = 700;
transfers[1].m_block_height = 700;
transfers[2].m_block_height = 704;
transfers[3].m_block_height = 716;
transfers[4].m_block_height = 701;
std::vector<size_t> unused_indices({0, 1, 2, 3, 4});
std::vector<size_t> selected;
SELECT(0);
PICK(3); // first the one that's far away
PICK(2); // then the one that's close
PICK(4); // then the one that's adjacent
PICK(1); // then the one that's on the same height
}
#define MKOFFSETS(N, n) \
offsets.resize(N); \
size_t n_outs = 0; \
for (auto &offset: offsets) \
{ \
offset = n_outs += (n); \
}
TEST(select_outputs, gamma)
{
std::vector<uint64_t> offsets;
MKOFFSETS(300000, 1);
tools::gamma_picker picker(offsets);
std::vector<double> ages(100000);
double age_scale = 120. * (offsets.size() / (double)n_outs);
for (size_t i = 0; i < ages.size(); )
{
uint64_t o = picker.pick();
if (o >= n_outs)
continue;
ages[i] = (n_outs - 1 - o) * age_scale;
ASSERT_GE(ages[i], 0);
ASSERT_LE(ages[i], offsets.size() * 120);
++i;
}
double median = epee::misc_utils::median(ages);
MDEBUG("median age: " << median / 86400. << " days");
ASSERT_GE(median, 1.3 * 86400);
ASSERT_LE(median, 1.4 * 86400);
}
TEST(select_outputs, density)
{
static const size_t NPICKS = 1000000;
std::vector<uint64_t> offsets;
MKOFFSETS(300000, 1 + (crypto::rand<size_t>() & 0x1f));
tools::gamma_picker picker(offsets);
std::vector<int> picks(/*n_outs*/offsets.size(), 0);
for (int i = 0; i < NPICKS; )
{
uint64_t o = picker.pick();
if (o >= n_outs)
continue;
auto it = std::lower_bound(offsets.begin(), offsets.end(), o);
auto idx = std::distance(offsets.begin(), it);
ASSERT_LT(idx, picks.size());
++picks[idx];
++i;
}
for (int d = 1; d < 0x20; ++d)
{
// count the number of times an output in a block of d outputs was selected
// count how many outputs are in a block of d outputs
size_t count_selected = 0, count_chain = 0;
for (size_t i = 0; i < offsets.size(); ++i)
{
size_t n_outputs = offsets[i] - (i == 0 ? 0 : offsets[i - 1]);
if (n_outputs == d)
{
count_selected += picks[i];
count_chain += d;
}
}
float selected_ratio = count_selected / (float)NPICKS;
float chain_ratio = count_chain / (float)n_outs;
MDEBUG(count_selected << "/" << NPICKS << " outputs selected in blocks of density " << d << ", " << 100.0f * selected_ratio << "%");
MDEBUG(count_chain << "/" << offsets.size() << " outputs in blocks of density " << d << ", " << 100.0f * chain_ratio << "%");
ASSERT_LT(fabsf(selected_ratio - chain_ratio), 0.025f);
}
}
TEST(select_outputs, same_distribution)
{
static const size_t NPICKS = 1000000;
std::vector<uint64_t> offsets;
MKOFFSETS(300000, 1 + (crypto::rand<size_t>() & 0x1f));
tools::gamma_picker picker(offsets);
std::vector<int> chain_picks(offsets.size(), 0);
std::vector<int> output_picks(n_outs, 0);
for (int i = 0; i < NPICKS; )
{
uint64_t o = picker.pick();
if (o >= n_outs)
continue;
auto it = std::lower_bound(offsets.begin(), offsets.end(), o);
auto idx = std::distance(offsets.begin(), it);
ASSERT_LT(idx, chain_picks.size());
++chain_picks[idx];
++output_picks[o];
++i;
}
// scale them both to 0-100
std::vector<int> chain_norm(100, 0), output_norm(100, 0);
for (size_t i = 0; i < output_picks.size(); ++i)
output_norm[i * 100 / output_picks.size()] += output_picks[i];
for (size_t i = 0; i < chain_picks.size(); ++i)
chain_norm[i * 100 / chain_picks.size()] += chain_picks[i];
double avg_dev = 0.0;
for (size_t i = 0; i < 100; ++i)
{
const double diff = (double)output_norm[i] - (double)chain_norm[i];
double dev = fabs(2.0 * diff / (output_norm[i] + chain_norm[i]));
ASSERT_LT(dev, 0.15);
avg_dev += dev;
}
avg_dev /= 100;
MDEBUG("avg_dev: " << avg_dev);
ASSERT_LT(avg_dev, 0.02);
}