Monero::AddressBookImpl Invalid destination address Invalid payment ID. Short payment ID should only be used in an integrated address Invalid payment ID Integrated address and long payment id can't be used at the same time Monero::PendingTransactionImpl Attempting to save transaction to file, but specified file(s) exist. Exiting to not risk overwriting. File: Failed to write transaction(s) to file daemon is busy. Please try again later. no connection to daemon. Please make sure daemon is running. transaction %s was rejected by daemon with status: . Reason: Unknown exception: Unhandled exception Monero::UnsignedTransactionImpl This is a watch only wallet Failed to sign transaction Claimed change does not go to a paid address Claimed change is larger than payment to the change address Change does to more than one address sending %s to %s with no destinations %s change to %s no change Loaded %lu transactions, for %s, fee %s, %s, %s, with min mixin %lu. %s Monero::WalletImpl payment id has invalid format, expected 16 or 64 character hex string: Failed to add short payment id: daemon is busy. Please try again later. no connection to daemon. Please make sure daemon is running. RPC error: failed to get random outputs to mix not enough money to transfer, available only %s, sent amount %s failed to parse address failed to parse secret spend key No view key supplied, cancelled failed to parse secret view key failed to verify secret spend key spend key does not match address failed to verify secret view key view key does not match address failed to generate new wallet: Failed to load unsigned transactions Failed to load transaction from file Wallet is view only failed to save file Failed to import key images: failed to get random outputs to mix: %s not enough money to transfer, available only %s, transaction amount %s = %s + %s (fee) not enough outputs for specified mixin_count output amount found outputs to mix transaction was not constructed transaction %s was rejected by daemon with status: one of destinations is zero failed to find a suitable way to split transactions unknown transfer error: internal error: unexpected error: unknown error Rescan spent can only be used with a trusted daemon Monero::WalletManagerImpl failed to parse txid failed to parse tx key failed to parse address failed to get transaction from daemon failed to parse transaction from daemon failed to validate transaction from daemon failed to get the right transaction from daemon failed to generate key derivation from supplied parameters error: received in txid received nothing in txid Wallet Failed to parse address Failed to parse key failed to verify key key does not match address command_line yes cryptonote::rpc_args Specify ip to bind rpc server Specify username[:password] required for RPC server Confirm rpc-bind-ip value is NOT a loopback (local) IP Invalid IP address given for -- permits inbound unencrypted external connections. Consider SSH tunnel or SSL proxy instead. Override with -- Username specified with -- cannot be empty cryptonote::simple_wallet Commands: failed to read wallet password invalid password start_mining [<number_of_threads>] - Start mining in daemon Stop mining in daemon Save current blockchain data Show current wallet balance Show blockchain height Show current wallet public address Show this help set seed: needs an argument. available options: language set always-confirm-transfers: needs an argument (0 or 1) set: unrecognized argument(s) wallet file path not valid: Attempting to generate or restore wallet, but specified file(s) exist. Exiting to not risk overwriting. PLEASE NOTE: the following 25 words can be used to recover access to your wallet. Please write them down and store them somewhere safe and secure. Please do not store them in your email or on file storage services outside of your immediate control. specify a recovery parameter with the --electrum-seed="words list here" wallet failed to connect to daemon: Daemon uses a different RPC major version (%u) than the wallet (%u): %s. Either update one of them, or use --allow-mismatched-daemon-version. List of available languages for your wallet's seed: Enter the number corresponding to the language of your choice: You had been using a deprecated version of the wallet. Please use the new seed that we provide. Generated new wallet: failed to generate new wallet: Opened watch-only wallet Opened wallet You had been using a deprecated version of the wallet. Please proceed to upgrade your wallet. You had been using a deprecated version of the wallet. Your wallet file format is being upgraded now. failed to load wallet: Use "help" command to see the list of available commands. Wallet data saved Mining started in daemon mining has NOT been started: Mining stopped in daemon mining has NOT been stopped: Blockchain saved Height transaction received spent unsupported transaction format Starting refresh... Refresh done, blocks received: payment id has invalid format, expected 16 or 64 character hex string: bad locked_blocks parameter: a single transaction cannot use more than one payment id: failed to set up payment id, though it was decoded correctly transaction cancelled. Sending %s. Your transaction needs to be split into %llu transactions. This will result in a transaction fee being applied to each transaction, for a total fee of %s The transaction fee is %s , of which %s is dust from change . A total of %s from dust change will be sent to dust address . This transaction will unlock on block %llu, in approximately %s days (assuming 2 minutes per block) Failed to write transaction(s) to file Unsigned transaction(s) successfully written to file: Not enough money in unlocked balance Failed to find a way to create transactions. This is usually due to dust which is so small it cannot pay for itself in fees, or trying to send more money than the unlocked balance, or not leaving enough for fees Reason: failed to find a suitable way to split transactions No unmixable outputs found No address given Claimed change does not go to a paid address Claimed change is larger than payment to the change address Change does to more than one address sending %s to %s with no destinations Failed to sign transaction Failed to sign transaction: Failed to load transaction from file daemon is busy. Please try later RPC error: wallet is watch-only and has no spend key Your original password was incorrect. Error with wallet rewrite: priority must be 0, 1, 2, 3, or 4 priority must be 0, 1, 2, 3,or 4 priority must be 0, 1, 2 3,or 4 invalid unit invalid count: must be an unsigned integer invalid value Same as transfer, but using an older transaction building algorithm sweep_all [mixin] address [payment_id] - Send all unlocked balance to an address donate [<mixin_count>] <amount> [payment_id] - Donate <amount> to the development team (donate.getmonero.org) set_log <level>|<categories> - Change current log detail (level must be <0-4>) address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] - Print all entries in the address book, optionally adding/deleting an entry to/from it Available options: seed language - set wallet seed language; always-confirm-transfers <1|0> - whether to confirm unsplit txes; print-ring-members <1|0> - whether to print detailed information about ring members during confirmation; store-tx-info <1|0> - whether to store outgoing tx info (destination address, payment ID, tx secret key) for future reference; default-mixin <n> - set default mixin (default is 4); auto-refresh <1|0> - whether to automatically sync new blocks from the daemon; refresh-type <full|optimize-coinbase|no-coinbase|default> - set wallet refresh behaviour; priority [0|1|2|3|4] - default/unimportant/normal/elevated/priority fee; confirm-missing-payment-id <1|0>; ask-password <1|0>; unit <monero|millinero|micronero|nanonero|piconero> - set default monero (sub-)unit; min-output-count [n] - try to keep at least that many outputs of value at least min-output-value; min-output-value [n] - try to keep at least min-output-count outputs of at least that value - merge-destinations <1|0> - whether to merge multiple payments to the same destination address show_transfers [in|out|pending|failed|pool] [<min_height> [<max_height>]] - Show incoming/outgoing transfers within an optional height range unspent_outputs [<min_amount> <max_amount>] - Show unspent outputs within an optional amount range) Show information about a transfer to/from this address Change wallet password set print-ring-members: needs an argument (0 or 1) set priority: needs an argument: 0, 1, 2, 3, or 4 set ask-password: needs an argument (0 or 1) set unit: needs an argument (monero, millinero, micronero, nanop, piconero) set min-outputs-count: needs an argument (unsigned integer) set min-outputs-value: needs an argument (unsigned integer) set merge-destinations: needs an argument (0 or 1) usage: set_log <log_level_number_0-4> | <categories> (Y/Yes/N/No): bad m_restore_height parameter: date format must be YYYY-MM-DD Restore height is: Is this okay? (Y/Yes/N/No): Daemon is local, assuming trusted Password for new watch-only wallet invalid arguments. Please use start_mining [<number_of_threads>] [do_bg_mining] [ignore_battery], <number_of_threads> should be from 1 to internal error: unexpected error: unknown error refresh failed: Blocks received: unlocked balance: amount spent global index tx id No incoming transfers No incoming available transfers No incoming unavailable transfers expected at least one payment_id payment transaction height unlock time No payments with id failed to get blockchain height: failed to connect to the daemon Transaction %llu/%llu: txid=%s Input %llu/%llu: amount=%s failed to get output: output key's originating block height shouldn't be higher than the blockchain height Originating block heights: | | Warning: Some input keys being spent are from , which can break the anonymity of ring signature. Make sure this is intentional! wrong number of arguments No payment id is included with this transaction. Is this okay? (Y/Yes/N/No): No outputs found, or daemon is not ready failed to get random outputs to mix: Sweeping %s in %llu transactions for a total fee of %s. Is this okay? (Y/Yes/N/No): Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No): Donating Loaded %lu transactions, for %s, fee %s, %s, %s, with min mixin %lu. %sIs this okay? (Y/Yes/N/No): This is a watch only wallet usage: show_transfer <txid> Transaction ID not found true failed to parse refresh type wallet is watch-only and has no seed wallet is non-deterministic and has no seed wallet is watch-only and cannot transfer mixin must be an integer >= 2 could not change default mixin could not change default priority Synchronize transactions and balance incoming_transfers [available|unavailable] - Show incoming transfers, all or filtered by availability payments <PID_1> [<PID_2> ... <PID_N>] - Show payments for given payment ID[s] transfer [<priority>] [<mixin_count>] <address> <amount> [<payment_id>] - Transfer <amount> to <address>. <priority> is the priority of the transaction. The higher the priority, the higher the fee of the transaction. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used. <mixin_count> is the number of extra inputs to include for untraceability. Multiple payments can be made at once by adding <address_2> <amount_2> etcetera (before the payment ID, if it's included) locked_transfer [<mixin_count>] <addr> <amount> <lockblocks>(Number of blocks to lock the transaction for, max 1000000) [<payment_id>] Send all unmixable outputs to yourself with mixin 0 Sign a transaction from a file Submit a signed transaction from a file integrated_address [PID] - Encode a payment ID into an integrated address for the current wallet public address (no argument uses a random payment ID), or decode an integrated address to standard address and payment ID Save wallet data Save a watch-only keys file Display private view key Display private spend key Display Electrum-style mnemonic seed Rescan blockchain for spent outputs Get transaction key (r) for a given <txid> Check amount going to <address> in <txid> Rescan blockchain from scratch Set an arbitrary string note for a txid Get a string note for a txid Show wallet status information Sign the contents of a file Verify a signature on the contents of a file Export a signed set of key images Import signed key images list and verify their spent status Export a set of outputs owned by this wallet Import set of outputs owned by this wallet set store-tx-info: needs an argument (0 or 1) set default-mixin: needs an argument (integer >= 2) set auto-refresh: needs an argument (0 or 1) set refresh-type: needs an argument: full (slowest, no assumptions); optimize-coinbase (fast, assumes the whole coinbase is paid to a single address); no-coinbase (fastest, assumes we receive no coinbase transaction), default (same as optimize-coinbase) set confirm-missing-payment-id: needs an argument (0 or 1) Wallet name not valid. Please try again or use Ctrl-C to quit. Wallet and key files found, loading... Key file found but not wallet file. Regenerating... Key file not found. Failed to open wallet: Generating new wallet... can't specify more than one of --generate-new-wallet="wallet_name", --wallet-file="wallet_name", --generate-from-view-key="wallet_name", --generate-from-json="jsonfilename" and --generate-from-keys="wallet_name" can't specify both --restore-deterministic-wallet and --non-deterministic Electrum-style word list failed verification No data supplied, cancelled failed to parse address failed to parse view key secret key failed to verify view key secret key view key does not match standard address account creation failed failed to parse spend key secret key failed to verify spend key secret key spend key does not match standard address failed to open account Daemon either is not started or wrong port was passed. Please make sure daemon is running or restart the wallet with the correct daemon address. invalid language choice passed. Please try again. View key: Your wallet has been generated! To start synchronizing with the daemon, use "refresh" command. Use "help" command to see the list of available commands. Always use "exit" command when closing monero-wallet-cli to save your current session's state. Otherwise, you might need to synchronize your wallet again (your wallet keys are NOT at risk in any case). You may want to remove the file "%s" and try again failed to deinitialize wallet this command requires a trusted daemon. Enable with --trusted-daemon blockchain can't be saved: daemon is busy. Please try again later. no connection to daemon. Please make sure daemon is running. refresh error: Balance: pubkey key image unlocked ringct T F locked RingCT - payment ID has invalid format, expected 16 or 64 character hex string: failed to get spent status Locked blocks too high, max 1000000 (˜4 yrs) usage: integrated_address [payment ID] Integrated address: account %s, payment ID %s Standard address: failed to parse payment ID or address usage: address_book [(add (<address> [pid <long or short payment id>])|<integrated address> [<description possibly with whitespaces>])|(delete <index>)] failed to parse payment ID failed to parse index Address book is empty. Index: Address: Payment ID: Description: usage: set_tx_note [txid] free text note usage: get_tx_note [txid] usage: sign <filename> wallet is watch-only and cannot sign failed to read file usage: verify <filename> <address> <signature> Bad signature from Good signature from usage: export_key_images <filename> wallet is watch-only and cannot export key images failed to save file Signed key images exported to usage: import_key_images <filename> usage: export_outputs <filename> Outputs exported to usage: import_outputs <filename> amount is wrong: expected number from 0 to Money successfully sent, transaction no connection to daemon. Please, make sure daemon is running. not enough outputs for specified mixin_count output amount found outputs to mix transaction was not constructed transaction %s was rejected by daemon with status: one of destinations is zero Failed to find a suitable way to split transactions unknown transfer error: Sweeping Sweeping %s for a total fee of %s. Is this okay? (Y/Yes/N/No) Money successfully sent, transaction: %s change to %s no change Transaction successfully signed to file usage: get_tx_key <txid> failed to parse txid Tx key: no tx keys found for this txid usage: check_tx_key <txid> <txkey> <address> failed to parse tx key failed to get transaction from daemon failed to parse transaction from daemon failed to validate transaction from daemon failed to get the right transaction from daemon failed to generate key derivation from supplied parameters error: received in txid received nothing in txid WARNING: this transaction is not yet included in the blockchain! This transaction has %u confirmations WARNING: failed to determine number of confirmations! usage: show_transfers [in|out|all|pending|failed] [<min_height> [<max_height>]] bad min_height parameter: bad max_height parameter: in out failed pending usage: unspent_outputs [<min_amount> <max_amount>] <min_amount> should be smaller than <max_amount> Amount: , number of keys: Min block height: Max block height: Min amount found: Max amount found: Total count: Bin size: Outputs per *: count ^ | + +--> block height ^ ^ wallet Random payment ID: Matching integrated address: sw Generate new wallet and save it to <arg> Generate incoming-only wallet from view key Generate wallet from private keys Specify Electrum seed for wallet recovery/creation Recover wallet using Electrum-style mnemonic seed Create non-deterministic view and spend keys Enable commands which rely on a trusted daemon Allow communicating with a daemon that uses a different RPC version Restore from specific blockchain height daemon is busy. Please try again later. possibly lost connection to daemon Error: Failed to initialize wallet tools::dns_utils DNSSEC validation passed WARNING: DNSSEC validation was unsuccessful, this address may not be correct! For URL: Monero Address = Is this OK? (Y/n) you have cancelled the transfer request tools::wallet2 Use daemon instance at <host>:<port> Use daemon instance at host <arg> instead of localhost Wallet password Wallet password file Use daemon instance at port <arg> instead of 18081 For testnet. Daemon must also be launched with --testnet flag Restricts to view-only commands can't specify daemon host or port more than once can't specify more than one of --password and --password-file the password file specified could not be read Enter new wallet password failed to read wallet password Failed to load file Specify username[:password] for daemon RPC client Failed to parse JSON Version %u too new, we can only grok up to %u failed to parse view key secret key failed to verify view key secret key failed to parse spend key secret key failed to verify spend key secret key Electrum-style word list failed verification At least one of Electrum-style word list and private view key must be specified Both Electrum-style word list and private key(s) specified invalid address view key does not match standard address spend key does not match standard address Cannot create deprecated wallets from JSON failed to generate new wallet: failed to read file tools::wallet_rpc_server Daemon is local, assuming trusted Cannot specify -- and -- Failed to create file . Check permissions or remove file Error writing to file RPC username/password is stored in file Can't specify more than one of --wallet-file and --generate-from-json Must specify --wallet-file or --generate-from-json Loading wallet... Storing wallet... Stored ok Loaded ok Wallet initialization failed: Failed to initialize wallet rpc server Starting wallet rpc server Stopped wallet rpc server Failed to store wallet: wallet_args Wallet options Generate wallet from JSON format file Use wallet <arg> Max number of threads to use for a parallel job Specify log file Config file General options Can't find config file Logging to: Logging to %s Usage: