moneromooo-monero
014f3a0d39
Add a daemon RPC version, and make simplewallet check it
...
If the version is different, simplewallet will refuse to use that
daemon, unless --allow-mismatched-daemon-version is used.
2016-07-10 16:49:40 +01:00
moneromooo-monero
34ecfdbf15
rpc: fix get_bans and set_bans RPC names, they were missing a _
2016-07-10 15:10:51 +01:00
moneromooo-monero
f11191a818
rpc: restrict number of fake outs requested in restricted rpc mode
2016-06-29 20:43:14 +01:00
moneromooo-monero
0c6e9e4ddd
rpc: fix getblock RPC sending blob as binary, not hex dump
2016-06-10 17:48:19 +01:00
osensei
1c0bffb5f0
Restrict also 'get_connections' and 'getbans' APIs.
2016-05-16 08:34:15 -03:00
osensei
9f8bc4946b
Don't allow 'flush_txpool' and 'setbans' JSON_RPC methods when running in restricted mode.
2016-05-14 03:06:04 -03:00
Howard Chu
b7140daea2
Add GET_HASHES_FAST rpc, use it in wallet
...
When m_refresh_from_block_height has been set, only hashes will be
retrieved up to that height, instead of full blocks. The same will
be done for "refresh <height>" when the specified height is beyond
the current local blockchain.
2016-04-17 15:25:46 +01:00
Riccardo Spagni
c2e9866fc6
Merge pull request #797
...
d662ab55c9dd23
2016-04-14 16:20:41 +09:00
moneromooo-monero
f17b2f42b2
rpc: add pool/blockchain and block height results to gettransactions
2016-04-09 12:40:32 +01:00
moneromooo-monero
5c9dd23b1c
rpc: add a do_not_relay boolean to tx submission
...
Just to make it easier
2016-04-05 20:15:54 +01:00
Riccardo Spagni
ab43e80331
Merge pull request #777
...
8757e46
2016-04-02 12:05:07 +09:00
Riccardo Spagni
a38ad63f8f
Merge pull request #767
...
24b3e90
2016-04-02 12:02:07 +09:00
Howard Chu
8757e46b78
add blockhashing blob to getblocktemplate
2016-03-30 16:54:36 +01:00
moneromooo-monero
24b3e9007a
Convey tx verification failure reasons to the RPC client
...
This allows appropriate action to be taken, like displaying
the reason to the user.
Do just that in simplewallet, which should help a lot in
determining why users fail to send.
Also make it so a tx which is accepted but not relayed is
seen as a success rather than a failure.
2016-03-27 12:37:18 +01:00
moneromooo-monero
600a3cf0c0
New RPC and daemon command to get output histogram
...
This is a list of existing output amounts along with the number
of outputs of that amount in the blockchain.
The daemon command takes:
- no parameters: all outputs with at least 3 instances
- one parameter: all outputs with at least that many instances
- two parameters: all outputs within that many instances
The default starts at 3 to avoid massive spamming of all dust
outputs in the blockchain, and is the current minimum mixin
requirement.
An optional vector of amounts may be passed, to request
histogram only for those outputs.
2016-03-26 21:10:43 +00:00
Mike C
ee71946cdc
Fix typo on bitmonerod rpc method error.
2016-03-14 23:09:21 -06:00
moneromooo-monero
789e2755f7
rpc: do not return bans if they're effectively spent
...
The blocked ip list will still hold them till next time
a connection attempt is made with that IP, so the effective
length of the ban may be negative.
2016-03-12 13:49:08 +00:00
moneromooo-monero
bf6d1474c0
new flush_txpool command, and associated RPC call
...
It can flush a particular tx, or the whole pool (the RPC command
can flush a list of transactions too)
2016-01-30 13:28:26 +00:00
moneromooo-monero
6288295f8e
rpc: add missing return on error when getting a tx
2016-01-30 13:28:12 +00:00
moneromooo-monero
3b1d7e03fc
Fix V1/V2 use of hard fork related parameters
...
Some of it uses hardcoded height, which will need some thinking
for next (voted upon) fork.
2016-01-29 17:21:11 +00:00
moneromooo-monero
664dc42e18
rpc: fix missing target information in RPC call
...
which fixes the status command via RPC too.
Turns out there are two versions of the GET_INFO call.
I'd never noticed before.
2016-01-11 22:52:01 +00:00
moneromooo-monero
a44d94d390
rpc: is_key_image_spent now checks the tx pool too
2016-01-05 22:16:24 +00:00
Riccardo Spagni
de03926850
updated copyright year
2015-12-31 08:39:56 +02:00
Riccardo Spagni
aa7d6c5412
Merge pull request #547
...
8ea7af1760331b3f2970f
2015-12-22 10:10:54 +02:00
moneromooo-monero
8ea7af1ba3
Allow the wallet to access hard fork information
...
And make it change behavior slightly when close/after first hard fork
2015-12-19 14:52:30 +00:00
moneromooo-monero
0ab56b80db
print top block hash in daemon diff command
...
and add top block hash in get_info RPC
2015-12-18 19:56:17 +00:00
moneromooo-monero
336b37580f
Register daemon command line arguments to core if they're used in core
...
This fixes coretests, which does not register daemon specific arguments,
but uses core, which uses those arguments. Also gets rid of an unwanted
dependency on daemon code from core.
2015-12-08 23:06:29 +00:00
Riccardo Spagni
8a52cf4055
Merge pull request #505
...
7574297
2015-11-30 00:18:20 +02:00
Riccardo Spagni
83b412f471
Merge pull request #503
...
55e5a33
2015-11-30 00:16:58 +02:00
moneromooo-monero
75742977a8
core_rpc_server: add a --restricted-rpc option
...
It does not expose the RPC for commands like start_mining, etc
(ie, commands a public node operator might want to be restricted)
2015-11-27 18:27:24 +00:00
moneromooo-monero
55e5a33d85
rpc: pass current block target in rpc
...
This fixes the hash rate being wrong on testnet after the switch
to 2 minute blocks
2015-11-26 00:25:13 +00:00
moneromooo-monero
38ceb73848
add RPC calls and commands to get/set bans
2015-11-26 00:04:22 +00:00
moneromooo-monero
932994c0cb
Relay transactions when they linger too long in the pool
...
The last relayed time of a transaction is maintained, and
transactions will be relayed again if they are still in the
pool after a certain amount of time, which increases with
the transaction's age. All such transactions are resent,
whether or not they originated on the local node.
2015-11-21 00:56:21 +00:00
moneromooo-monero
051ddbc741
rpc: fix start_mining and status RPC crashes
...
They check whether they're running on testnet by accessing the
m_rpc_server object, which does not exist when in RPC mode.
Also, fix hard_fork_info being called with the wrong API.
2015-10-28 18:09:36 +00:00
moneromooo-monero
06c65cb0ef
rpc: fix hard_fork_info RPC
...
I had never tested it, obviously
2015-10-26 10:17:48 +00:00
moneromooo-monero
253ed76ef4
core_rpc_server: add optional json decoded tx to COMMAND_RPC_GET_TRANSACTIONS
2015-10-13 22:11:52 +01:00
moneromooo-monero
ca23c0e5c8
core_rpc_server: add a getblock RPC command, and fix print_block
2015-10-13 21:37:35 +01:00
moneromooo-monero
e546f3724a
Add an RPC call and daemon command to get info on hard fork voting
2015-09-19 16:47:48 +01:00
Riccardo Spagni
7792255968
Merge pull request #369
...
d87a2d2
2015-08-13 20:04:31 +02:00
moneromooo-monero
d87a2d2bb2
core_rpc_server: replace vector<bool> with vector<int> in RPC
...
vector<bool> causes issues in serialization with Boost 1.56
2015-08-13 16:33:28 +01:00
moneromooo-monero
e7b00abfaa
core_rpc_server: find transactions in the pool as well as the blockchain
2015-08-11 15:54:19 +01:00
moneromooo-monero
83bbea4c7f
Add a is_key_image_spent daemon command and RPC call
2015-08-11 10:52:41 +01:00
moneromooo-monero
d09be116c6
core_rpc_server: add a getter for the testnet flag
2015-05-28 23:14:37 +01:00
moneromooo-monero
754f863a7e
core_rpc_server: log some error messages to the console
...
It's helpful when you don't know something failed (especially as
everything ends up returning true, so caller thinks all's fine)
2015-05-28 23:13:32 +01:00
moneromooo-monero
bac366e173
core_rpc_server: reenable print_pl
2015-05-28 14:10:39 +01:00
warptangent
b76857f9d9
Add mempool output to daemon via command and RPC
...
This is for the "print_pool" command and "get_transaction_pool" RPC
method.
Add mempool's spent key images to the results.
2015-04-23 07:04:36 -07:00
rfree2monero
32c19c6c3d
[fix] log level change. compilation: dns, tests
...
old unbound #warning does not block compilation
unit tests build fine. Even though the RPC/P2P network type is required again
2015-04-10 16:54:21 +02:00
rfree2monero
c511abf005
remerged; commands JSON. logging upgrade. doxygen
2015-04-01 19:00:45 +02:00
Thomas Winget
a0590d29cd
Restore daemon interactive mode
...
Daemon interactive mode is now working again.
RPC mapped calls in daemon and wallet have both had connection_context
removed as an argument as that argument was not being used anywhere.
2015-03-27 08:01:30 -04:00
Thomas Winget
db53e1956a
revert stop_daemon method to use correct exit
...
This was changed because sometimes the daemon does not complete its exit
routine with this method, but as it does correctly wind most things down
even if it gets stuck I've changed it back.
2015-02-24 00:54:50 -05:00
Thomas Winget
96cbecffd7
RPC calls for background daemon added in
...
The RPC calls the daemon executable uses to talk to the running daemon
instance have mostly been added back in. Rate limiting has not been
added in upstream, but is on its way in a separate effort, so those
calls are still NOPed out.
2015-02-24 00:44:36 -05:00
Thomas Winget
9193d6fb5b
Daemonize changes pulled in -- daemon builds
...
many RPC functions added by the daemonize changes
(and related changes on the upstream dev branch that were not merged)
were commented out (apart from return). Other than that, this *should*
work...at any rate, it builds, and that's something.
2015-02-24 00:05:19 -05:00
Riccardo Spagni
7de1a2d57a
previous hash added to GBT
2015-01-06 18:37:10 +02:00
Riccardo Spagni
f4b69d553a
year updated in license
2015-01-02 18:52:46 +02:00
Ben Boeckel
7d708e4223
cmake: support 2.8.7
...
Older versions of CMake support LINK_{PUBLIC,PRIVATE} while newer
versions prefer PUBLIC and PRIVATE instead, but still support the LINK_
prefix.
2014-10-24 15:29:51 -04:00
Ben Boeckel
f53f04724c
cmake: handle private vs. public headers
2014-10-23 16:42:34 -04:00
Ben Boeckel
55ca7d3b34
cmake: refactor common code with libraries
2014-10-23 16:42:34 -04:00
Ben Boeckel
89cff7bddc
cmake: put each library into its own directory
...
This cleans up the CMake code and shows patterns more easily (to be
refactored in the next commit).
2014-10-23 16:42:34 -04:00
moneromooo-monero
beecd139a2
core_rpc_server: use do while(0) idiom in macros using if
2014-10-06 14:58:35 +01:00
moneromooo-monero
add803be89
core_rpc_server: fix overreads in slow_memmem
...
It would read data outside the allocated space in a couple cases.
2014-10-06 14:57:49 +01:00
Zachary Michaels
59ab569da1
Give up on brace initializers in initializer lists (MSVC bug)
2014-09-15 23:14:24 +02:00
Zachary Michaels
d03308734b
Separate testnet address prefix
2014-09-15 15:54:59 +02:00
Zachary Michaels
3ef7f33300
Add descriptions for RPC command line params
2014-09-15 15:53:50 +02:00
Zachary Michaels
658b6690a3
Separate rpc port for testnet
2014-09-15 15:53:46 +02:00
Zachary Michaels
fb4146fa34
Reorganize testnet constants
2014-09-15 15:53:10 +02:00
Jakob Lind
e4273f2415
#36 simplewallet refresh include optional height param
...
height param is used optionally in refresh command
TODO: This should also be the default behaviour
when generating a new wallet.
2014-08-01 10:17:50 +02:00
fluffypony
6fc995fe5d
License updated to BSD 3-clause
2014-07-23 15:03:52 +02:00
Thomas Winget
ad4061002c
Missed serializing a get_connections RPC response parameter
2014-07-22 20:54:45 -04:00
Zachary Michaels
2796a7f015
Add get_info command to daemon json rpc
2014-07-22 14:00:10 -04:00
Thomas Winget
9f88b7ce6b
Added get_connections RPC call to daemon
2014-07-18 19:33:03 -04:00
Zachary Michaels
dee9abcd60
Match empty RPC request with other requests
2014-07-01 14:57:27 -04:00
Zachary Michaels
efad8c9f31
Switch list to vector for RPC serialization
2014-07-01 14:57:27 -04:00
mydesktop
ea99573f99
new error code for rpc
2014-06-11 17:39:59 -04:00
mydesktop
75fc3e90b1
Fix for orphan fix (check blocksize)
2014-06-11 17:32:53 -04:00
monero-project
feac5a7b2d
Correcting high orphan rate of blocks at pool
2014-06-11 10:46:56 -04:00
Neozaru
7fea5645e2
'getinfo' daemon HTTP-RPC returns 'target_height' for progress estimations
2014-06-04 22:50:13 +02:00
monero-project
e526fd3a3c
Merge pull request #20 from artifexd/wallet_refresh
...
Enable wallet refresh before blockchain is saved or completely sync'd.
2014-06-02 10:53:22 -04:00
artifexd
7f0b8465e7
Enable wallet refresh before blockchain is saved or completely sync'd.
2014-06-01 18:20:20 -04:00
Neozaru
8530629e22
Merge bitmonero@monero-project
2014-06-01 18:21:30 +02:00
Neozaru
af5a28efe5
'mining_status' Daemon RPC command
2014-05-25 21:36:12 +02:00
mydesktop
3a3a817678
0.8.8update
2014-05-25 13:06:40 -04:00
Neozaru
eb2db3cf61
Added 'save_bc' command in daemon for saving blockchain remotely
2014-05-16 00:26:35 +02:00
Neozaru
4690670031
Added 'save_bc' command in daemon for saving blockchain remotely
2014-05-16 00:21:43 +02:00
mydesktop
333f975760
initial [broken] update
2014-05-03 12:19:43 -04:00
mydesktop
79a4bedc36
mac osx building fixes
2014-04-30 16:50:06 -04:00
mydesktop
67df296650
various fixes to allow mac osx compilation
2014-04-30 13:52:21 -04:00
Antonio Juarez
9682a15400
Port mapping with UPnP
2014-04-09 13:14:35 +01:00
Antonio Juarez
29c2859a3e
json rpc for wallet and bugfix
2014-04-02 17:00:17 +01:00
Antonio Juarez
8efa1313f3
some fixes
2014-03-20 11:46:11 +00:00
Antonio Juarez
296ae46ed8
moved all stuff to github
2014-03-03 22:07:58 +00:00
