The commands handler must not be destroyed before the config
object, or we'll be accessing freed memory.
An earlier attempt at using boost::shared_ptr to control object
lifetime turned out to be very invasive, though would be a
better solution in theory.
15e62581 connection_context: initialize m_callback_request_count to 0 (moneromooo-monero)
5fa199c6 copyable_atomic: add a ctor with initial value (moneromooo-monero)
- internal nullptr checks
- prevent modifications to network_address (shallow copy issues)
- automagically works with any type containing interface functions
- removed fnv1a hashing
- ipv4_network_address now flattened with no base class
792ba4f0 Log categories can now be added to and removed from (moneromooo-monero)
48f92eb6 easylogging++: add categories getter (moneromooo-monero)
f35afe62 epee: factor log level/categories setting (moneromooo-monero)
ef005f5e p2p: add a couple early outs when the stop signal is received (moneromooo-monero)
80d361c7 abstract_tcp_server2: improve tracking/cancelling of early connections (moneromooo-monero)
close might end up dropping a ref, ending up removing the
connection from m_connects, as the lock is recursive. This'd
cause an out of bounds exception and kill the idle connection
maker thread
df0cffed cryptonote_protocol: warn if we see a higher top version we expect (moneromooo-monero)
317ab21a cryptonote_protocol: less strict check on top version on connect (moneromooo-monero)
cc81a371 cryptonote_protocol: update target height when syncing too (moneromooo-monero)
e2ad372b cryptonote_protocol: simplify and remove unnecessary casts (moneromooo-monero)
727e67ca cryptonote_protocol: print peer top height along with its version (moneromooo-monero)
b5345ef4 crypto: use malloc instead of alloca (moneromooo-monero)
80794b31 thread_group: set thread size to THREAD_STACK_SIZE (moneromooo-monero)
5524bc31 print peer id in 0 padded hex for consistency (moneromooo-monero)
8f8cc09b contrib: add sync_info to rlwrap command set (moneromooo-monero)
70b8c6d7 cryptonote_protocol: misc fixes to the new sync algorithm (moneromooo-monero)
We don't actually need to keep them past the call to start, as this
adds them to the config object list, and so they'll then be cancelled
already when the stop signal arrives. This allows removing the periodic
call to cleanup connections.
b7d6ec83 simplewallet: add (out of sync) or (no daemon) markers in the prompt (moneromooo-monero)
fa23a500 wallet2: add a is_synced function (moneromooo-monero)
f1307bbd node_rpc_proxy: add a proxy for target height (moneromooo-monero)
5d4ef719 core: speed up output index unique set calculation (moneromooo-monero)
19d7f568 perf_timer: allow profiling more granular than millisecond (moneromooo-monero)
bda8c598 epee: add nanosecond timer and pause/restart profiling macros (moneromooo-monero)
dc0b312f wallet_rpc_server: optionally return tx blobs on transfer calls (moneromooo-monero)
5eb79983 epee: add a KV_SERIALIZE variant for optional parameters (moneromooo-monero)
A block queue is now placed between block download and
block processing. Blocks are now requested only from one
peer (unless starved).
Includes a new sync_info coommand.
Nanosecond timer precision won't work on Windows, but we don't
care since I'm using that just for profiling incremental code
paths, but a Windows coder is welcome to add it if there's a way.
This was the case for monero-wallet-cli already, but not for
monerod, which was making it pretty spammy as it was duplicating
intended output. Since my original intent was to ensure logs
included command output for debugging, this achieves both.
76043b17 monero-wallet-cli: hang on exit in readline code (#2117) (moneromooo-monero)
a73a42a6 monero-wallet-cli: hang on exit in readline code (#2117) (moneromooo-monero)
be9d4f04 Fix multiline wallet cli output with readline (Jethro Grassie)
readline_buffer: fix start/stop threads being starved by process
process could run for quite some time re-acquiring the process
lock, leaving start/stop starving. Yielding after unlock in
process is much better but doesn't seem to be enough to reliably
yield, so we sleep for a millisecond, which should be transparent
for user input anyway.
Signed-off-by: Jethro Grassie <jtg@xtrabass.com>
monero-wallet-cli commands which have multine output sometimes causes
issues with the readline support. This patch fixes show_transfers,
payments and incoming_transfers.
Existing tests: block, transaction, signature, cold outputs,
cold transaction.
Data for these is in tests/data/fuzz.
A convenience shell script is in contrib/fuzz_testing/fuzz.sh, eg:
contrib/fuzz_testing/fuzz.sh signature
The fuzzer will run indefinitely, ^C to stop.
Fuzzing is currently supported for GCC only. I can't get CLANG
to build Monero here as it dies on some system headers, so if
someone wants to make it work on both, that'd be great.
In particular, the __AFL_LOOP construct should be made to work
so that a given run can fuzz multiple inputs, as the C++ load
time is substantial.
07c4276c Don't issue a new timedsync while one is already in progress (Howard Chu)
cf3a376c Don't timeout a slow operation that's making progress (Howard Chu)
340830de Fix PR#2039 (Howard Chu)
It'd eat up a core constantly, due to spending its time jumping
back and forth between userland and kernel. We now wait for up
to a millisecond in kernel, which will be transparent to the user
and drop to idle most of the time.
This PR adds readline support to the daemon and monero-wallet-cli. Only
GNU readline is supported (e.g. not libedit) and there are cmake checks
to ensure this.
There is a cmake variable, Readline_ROOT_DIR that can specify a
directory to find readline, otherwise some default paths are searched.
There is also a cmake option, USE_READLINE, that defaults to ON. If set
to ON, if readline is not found, the build continues but without
readline support.
One negative side effect of using readline is that the color prompt in
the wallet-cli now has no color and just uses terminal default. I know
how to fix this but it's quite a big change so will tackle another time.
A timedsync is issued every minute on a connection, but the input
tineout is 2 minutes. This means a new sync request could be issued
while a slow sync request was already in progress. The additional
request will further clog the network on a slow connection, and
cause a premature timeout.
All code which was using ip and port now uses a new IPv4 object,
subclass of a new network_address class. This will allow easy
addition of I2P addresses later (and also IPv6, etc).
Both old style and new style peer lists are now sent in the P2P
protocol, which is inefficient but allows peers using both
codebases to talk to each other. This will be removed in the
future. No other subclasses than IPv4 exist yet.
- Performance improvements
- Added `span` for zero-copy pointer+length arguments
- Added `std::ostream` overload for direct writing to output buffers
- Removal of unused `string_tools::buff_to_hex`
Because some people just won't even try to read what is written
and freak out because the word FATAL is in here, despite the
context making it clear it's not an error.
8bdc86be protocol: speed up sync by minimizing duplicate work (moneromooo-monero)
61dfa310 epee: fix some log macros not printing context nicely (moneromooo-monero)
c02e1cb9 Updates to epee HTTP client code - http_simple_client now uses std::chrono for timeouts - http_simple_client accepts timeouts per connect / invoke call - shortened names of epee http invoke functions - invoke command functions only take relative path, connection is not automatically performed (Lee Clagett)
- http_simple_client now uses std::chrono for timeouts
- http_simple_client accepts timeouts per connect / invoke call
- shortened names of epee http invoke functions
- invoke command functions only take relative path, connection
is not automatically performed
using the MONERO_LOG_FORMAT environment variable.
Default is:
%datetime{%Y-%M-%d %H:%m:%s.%g}\t%thread\t%level\t%logger\t%loc\t%msg
Field list in easylogging++ documentation.
Don't forget to escape as needed.
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
5783dd8c tests: add unit tests for uri parsing (moneromooo-monero)
82ba2108 wallet: add API and RPC to create/parse monero: URIs (moneromooo-monero)
d9001b43 epee: add functions to convert from URL format (ie, %XX values) (moneromooo-monero)
When receiving an answer packet, the command code was passed
to the callback instead of the error code. This was hiding
the "command not found" failure from the peer, and in turn
causing the code to attempt to deserialize a non existent
reply string.
48b57d8 monero.supp: valgrind suppressions file (moneromooo-monero)
ffd8c41 ringct: check the size of amount_keys is the same as destinations (moneromooo-monero)
836669d ringct: always shutdown the boost io service (moneromooo-monero)
This is intended to catch traffic coming from a web browser,
so we avoid issues with a web page sending a transfer RPC to
the wallet. Requiring a particular user agent can act as a
simple password scheme, while we wait for 0MQ and proper
authentication to be merged.
Support building internal libraries as shared. This reduces
development time by eliminating the need to re-link all
binaries every time non-interface code in the library changes.
Instead, can hack on libxyz, then `make libxyz`, and re-run
monerod.
By default BUILD_SHARED_LIBS is OFF in release build type,
and ON in debug build type, but can be overriden with -D.
This adds [snap](https://snapcraft.io) packaging to the project. See the
link for more information on snaps. Snap packages install on all Linux
distributions. On Ubuntu, snap confinement with apparmor and seccomp
provide an additional layer of security.
This snap sets up monerod as a systemd service, which should start
immediately on install. To access the wallet CLI, simply run `monero`
(/snap/bin/monero). I think it's a really quick & easy way to get
started with monero.
I've made some opinionated decisions in the packaging just to kick this
off, but I'm happy to iterate on this stuff.
The noexcept specs were added to make GCC 6.1.1 happy (#846), but this
one was missing (because GCC did not complain about it on Linux, but
does complain on OSX).
5dc09f2 wallet_rpc_server: fix some string values being returned between <> (moneromooo-monero)
f8213c0 Require 64/16 characters for payment ids (moneromooo-monero)
The default behavior for hex string parsing would allow the
last digit to be made from a single hexadecimal character,
which is correct, but we typically do not want that as it
gets confusing and easy to not spot wrong input size.
The destructors get a noexcept(true) spec by default, but these
destructors in fact throw exceptions. An alternative fix might be to not
throw (most if not all of these throws are non-essential
error-reporting/logging).
1c0bffb Restrict also 'get_connections' and 'getbans' APIs. (osensei)
9f8bc49 Don't allow 'flush_txpool' and 'setbans' JSON_RPC methods when running in restricted mode. (osensei)
When the send queue limit is reached, it is likely to not drain
any time soon. If we call close on the connection, it will stay
alive, waiting for the queue to drain before actually closing,
and will hit that check again and again. Since the queue size
limit is the reason we're closing in the first place, we call
shutdown directly.
If we reach the send queue size limit, we need to release the lock,
or we will deadlock and it will never drain.
If we reach that limit, it's likely there's another problem in the
first place though, so it will probably not drain in practice either,
unless some kind of transient network timeout.
Since connections from the ::connect method are now kept in
a deque to be able to cancel them on exit, this leaks both
memory and a file descriptor. Here, we clean those up after
30 seconds, to avoid this. 30 seconds is higher then the
5 second timeout used in the async code, so this should be
safe. However, this is an assumption which would break if
that async code was to start relying on longer timeouts.
When the boost ioservice is stopped, pending work notifications
will not happen. This includes deadline timers, which would
otherwise time out the now cancelled I/O operations. When this
happens just after starting a new connect operation, this can
leave that operations in a state where it won't receive either
the completion notification nor a timeout, causing a hang.
This is fixed by keeping a list of connections corresponding
to the connect operations, and cancelling them before stopping
the boost ioservice.
Note that the list of these connections can grow unbounded, as
they're never cleaned up. Cleaning them up would involve
working out which connections do not have any pending work,
and it's not quite clear yet how to go about this.
This prevents an exception from existing the loop without
calling the exit handler, if one is defined.
The daemon defines one, which stops the p2p layer, and will
only exit once the p2p layer is shut down. This would cause
a hang upon an exception, as the input thread would have
exited and the daemon would wait forever with no console
user input.
The daemon will be polled every 90 seconds for new blocks.
It is enabled by default, and can be turned on/off with
set auto-refresh 1 and set auto-refresh 0 in the wallet.
The daemon registers a custom exit command, which cause the
loop to stop. Catch this case before printing "Failed to read line"
as this is an expected case.
If process path name isn't found, then leave log file name blank.
This also applies if a process name is found, but it's blank after
removing a trailing dot extension.
It uses the async console handler differently than simplewallet,
and wasn't running the same exit code, causing it to never actually
exit after breaking out of the console entry loop.
Add fix for compile error with multiple uses of peerid_type (uint64_t)
variable in lambda expression.
- known GCC issue: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65843
epee: replace return value of nullptr for expected boolean with false.
Fixes#231.
Daemon interactive mode is now working again.
RPC mapped calls in daemon and wallet have both had connection_context
removed as an argument as that argument was not being used anywhere.
