Commit graph

661 commits

Author SHA1 Message Date
moneromooo-monero
b90e14d927
tests: add a unit test for canonical decomposed amounts 2015-12-26 11:41:50 +00:00
moneromooo-monero
79beed221d
tests: fix various tests by using parameters better suited to monero
Either smaller coin values (as monero has smaller block rewards),
or pre-hard fork values (full reward zone), or post-Bytecoin values
(emission speed).
2015-12-25 22:26:34 +00:00
moneromooo-monero
d0a8362b6b
tests: fix some double spending tests
Some tests assume the first output in a transaction goes to the recipient.
However, it can be the change. When it is, the recipient's keys will not
recognize this output. To fix this, we send all we have, to ensure there
is no change, and the first output goes to the recipient.

I'm not sure why this worked with Cryptonote. The tests sent 17 coins,
which seems way smaller than the first Bytecoin block reward, so there
would have been change too. Maybe outputs were not shuffled originally.
2015-12-25 22:23:36 +00:00
moneromooo-monero
2358d0d5be
tests: use 255 as a "too high" block version
While the original cryptonote accepted only the current major
version, we can accept higher ones.
2015-12-25 22:22:12 +00:00
moneromooo-monero
81cb0fcdcc
blockchain: fix bitflipping test with quantized block rewards
Block reward may now be less than the full amount allowed.
This was breaking the bitflipping test.
We now keep track of whether a block which was accepted by the core
has a lower than allowed block reward, and allow this in the test.
2015-12-25 22:07:58 +00:00
moneromooo-monero
6c868595b7
unit_tests: fix hard fork tests
A couple stopped passing when the hard fork code was made
to reject incoming hard fork versions it did not know about.
2015-12-24 16:12:03 +00:00
moneromooo-monero
8b0200adf8
unit_tests: new test for IP blocking 2015-12-24 16:05:19 +00:00
moneromooo-monero
217792351d
Tone down a bit L0 logs during daemon sync 2015-12-14 00:36:37 +00:00
moneromooo-monero
cbded439f4
core_tests: fix ring_signature_1 tests
They were trying to send too much monero, and thus failing.
The parameters were set in such a way that the (simple) output
gathering code could fulfill them for 4 block rewards for the
original Bytecoin emission, but that does not work with monero
so we need to use smaller values.
2015-12-13 13:58:13 +00:00
moneromooo-monero
c3d208fcbe
core_tests: bump default test fee to 0.02 monero
The current monero consensus uses 0.01 per kB fees, so use enough
for 2 kB transactions for now. It'll probably have to be either
bumped further or changed to calculate the proper fee.
2015-12-13 13:56:15 +00:00
moneromooo-monero
10da0a0b7c
add a --fakechain argument for tests
The core tests use the blockchain, and reset it to be able
to add test data to it. This does not play nice with the
databases, since those will save that data without an explicit
save call.
We add a fakechain flag that the tests will set, which tells
the core and blockchain code to use a separate database, as
well as skip a few things like checkpoints and fixup, which
only make sense for real data.
2015-12-13 11:38:37 +00:00
moneromooo-monero
eee44e62bc
unit_tests: fix block reward test using post hard fork settings
This would fail, as the post hard fork settings would yield
different data, and the test expects pre hard fork data.
2015-12-13 11:18:59 +00:00
moneromooo-monero
44f1267a39
tests: fix a typo in test name 2015-12-13 11:10:33 +00:00
moneromooo-monero
f141869cac
tests: remove data-dir argument registration
It is already registered in cryptonote::core::init_options,
which we now call
2015-12-09 17:31:15 +00:00
moneromooo-monero
a3c5ca077c
blockchain_db: make the indexing base a BlockchainDB virtual function 2015-12-05 18:41:29 +00:00
moneromooo-monero
d887c18e33
hardfork: fix more major/minor issues
Also add some more tests, and rename some instances of
"version" and "add" for clarity.

NOTE: the starting height values are sometimes wrong.
I suspect this is due to the hard fork reorg code being
buggy, since they're good when syncing after the fact.
However, they're not actually used by the consensus code,
so I'm ignoring this for now, but this needs debugging.
2015-11-24 20:47:12 +00:00
moneromooo-monero
932994c0cb
Relay transactions when they linger too long in the pool
The last relayed time of a transaction is maintained, and
transactions will be relayed again if they are still in the
pool after a certain amount of time, which increases with
the transaction's age. All such transactions are resent,
whether or not they originated on the local node.
2015-11-21 00:56:21 +00:00
Riccardo Spagni
0d09e15a1c
Merge pull request #490
baf101e More changes for 2-min blocks Use the correct block time for realtime fuzz on locktime Use the correct block time to calculate next_difficulty on alt chains (will not work as-is with voting) Lock unit tests to original block time for now (Javier Smooth)
4fea1a5 Adjust difficulty target (2 min) and full reward zone (60 kbytes) for block version 2 (Javier Smooth)
2015-11-18 10:37:27 +02:00
moneromooo-monero
036d352210
tests: fix build error with CLANG 2015-11-17 16:33:00 +00:00
Javier Smooth
baf101ef4a More changes for 2-min blocks
Use the correct block time for realtime fuzz on locktime
Use the correct block time to calculate next_difficulty on alt chains (will not work as-is with voting)
Lock unit tests to original block time for now
2015-11-13 00:37:35 -08:00
Javier Smooth
4fea1a5fe7 Adjust difficulty target (2 min) and full reward zone (60 kbytes) for block version 2 2015-11-13 00:30:45 -08:00
moneromooo-monero
2f254ff599
hardfork: add a get_ideal_version(uint64_t) function
It returns the ideal version for a given height, which is
based on the minimum height for a fork, disregarding votes
2015-11-10 09:45:51 +00:00
moneromooo-monero
4187e569d8
hardfork: allow per-fork voting thresholds
And setup the first fork to not vote
2015-11-08 13:04:41 +00:00
moneromooo-monero
ef4c5b5d8e
unit_tests: fix build without berkeleydb 2015-11-03 09:53:09 +00:00
moneromooo-monero
4f873bcbaa
Remove some old/obsolete/unused code
git history's here if needed to get any of this back
2015-10-27 10:01:20 +00:00
moneromooo-monero
3e89df4150
Build fixes for the old blockchain_storage version 2015-10-26 22:36:06 +00:00
moneromooo-monero
6376627530
hardfork: switch voting to block minor version
Using major version would cause older daemons to reject those
blocks as they fail to deserialize blocks with a major version
which is not 1. There is no such restriction on the minor
version, so switching allows older daemons to coexist with
newer ones till the actual fork date, when most will hopefully
have updated already.

Also, for the same reason, we consider a vote for 0 to be a
vote for 1, since older daemons set minor version to 0.
2015-10-21 19:21:14 +01:00
moneromooo-monero
55178aed8c
unit_tests: remove leftover debug traces in hardfork test 2015-10-21 19:17:44 +01:00
moneromooo-monero
0a7421b607
hardfork: rescan speedup
Add a block height before which version 1 is assumed
Use DB transactions
2015-09-27 22:46:41 +01:00
moneromooo-monero
088bc56d79
hardfork: change window semantics to not count the newly added block
This allows knowing the hard fork a block must obey in order to be
added to the blockchain. The previous semantics would use that new
block's version vote to determine this hard fork, which made it
impossible to use the rules to validate transactions entering the
tx pool (and made it impossible to validate a block before adding
it to the blockchain).
2015-09-27 22:46:25 +01:00
moneromooo-monero
5b11a89a76
hardfork: most state now saved to the DB
There will be a delay on first load of an existing blockchain
as it gets reparsed for this state data.
2015-09-20 18:42:52 +01:00
moneromooo-monero
62b1f74116
New hardfork class
This keeps track of voting via block version, in order to decide
when to enable a particular fork's code.
2015-09-12 11:14:44 +01:00
moneromooo-monero
5990344cb0
dns: make ctor private
This ensures one can't instanciate a DNSResolver object by
mistake, but uses the singleton. A separate create static
function is added for cases where a new object is explicitely
needed.
2015-08-27 21:06:09 +01:00
Rostislav
16d71a3668 Fix block_reward unit tests 2015-07-26 20:15:23 +00:00
NoodleDoodleNoodleDoodleNoodleDoodleNoo
e5d2680094 ** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).

Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.

LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5

ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.

[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
   This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.

[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
	a. 0 = Compute long hash per block (may take a while depending on CPU)
	b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
	a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
	b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
	Fast    - Write meta-data but defer data flush.
	Fastest - Defer meta-data and data flush.
	Sync    - Flush data after nblocks_per_sync and wait.
	Async   - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
        Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
	Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
	For berkeley-db only. Auto remove logs if enabled.

**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
	At the moment, you need a full resync to use this optimized version.

[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.

Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block

**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop,  Quad-core / 8-threads 2600k  (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop,   Dual-core / 4-threads U4200  (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).

lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop,  Quad-core / 8-threads 2600k  (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).

berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k  (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).

berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-15 23:20:16 -07:00
Rostislav
3ade396406 Set dnssec_valid value correctly in dns_utils; fix address_from_url test 2015-06-20 20:02:13 +00:00
Riccardo Spagni
e01d32e52d
cleaning up, removing redundant files, renaming, fixing incorrect licenses 2015-05-31 13:40:18 +02:00
Riccardo Spagni
6f15194049
Merge pull request #290
fee8424 Allow name@domain.tld for OpenAlias lookups (warptangent)
a0fe18f Revert "Allow name@domain.tld for OpenAlias lookups" (warptangent)
2015-05-20 14:36:38 +02:00
warptangent
fee8424938
Allow name@domain.tld for OpenAlias lookups
Based on tewinget's update.
Make OpenAlias address format independent of existing DNS functions.

Add tests.

Test:

make debug-test
cd build/debug/tests/unit_tests
# test that regular DNS functions work, including IPv4 lookups.
# also test function that converts OpenAlias address format
make && ./unit_tests --gtest_filter=DNSResolver*
# test that OpenAlias addresses like donate@getmonero.org work from
# wallet tools
make && ./unit_tests --gtest_filter=AddressFromURL.Success
2015-05-19 02:56:04 -07:00
moneromooo-monero
f278fe3883
s/terget/target/ 2015-05-17 13:16:44 +01:00
rfree2monero
32c19c6c3d
[fix] log level change. compilation: dns, tests
old unbound #warning does not block compilation
unit tests build fine. Even though the RPC/P2P network type is required again
2015-04-10 16:54:21 +02:00
Thomas Winget
a8bc7182ea
Merge BlockchainDB into upstream 2015-04-07 17:56:18 -04:00
rfree2monero
3cbdf198f1 Merge remote-tracking branch 'monero-official/master' into network-1.6-work1 2015-04-01 18:24:45 +02:00
Thomas Winget
94cb295db4
Merge upstream into blockchain 2015-03-29 09:58:18 -04:00
Thomas Winget
874f48bc82
update berkeleydb branch to blockchain branch 2015-03-25 07:30:23 -04:00
Thomas Winget
5c0bc0050c
Merge upstream updates into blockchain branch 2015-03-25 05:56:36 -04:00
Thomas Winget
dbf46a721a
DNSSEC added (hardcoded key)
DNSSEC is now implemented with the hardcoded key from unbound.
This will need to be not hardcoded in the future, but is okay for now.

Unit tests updated for DNSSEC (as well as for the fact that, contrary to
previous assumption, example.com does not have a static IP address).
2015-03-24 06:34:15 -04:00
Riccardo Spagni
d7286395c9
Merge pull request #243
51e3579 Fixed bug in static linking boost on MINGW (Thomas Winget)
f78bb00 Hopefully fixes build on Windows for real this time (Thomas Winget)
2b0583b Hopefully fixes build on Windows (Thomas Winget)
9dab105 DNS checkpoint loading for testnet should now be correct (Thomas Winget)
52f9629 sending commands to forked daemon works on testnet now (Thomas Winget)
76289d0 Fix tests building -- function signatures changed (Thomas Winget)
db53e19 revert stop_daemon method to use correct exit (Thomas Winget)
96cbecf RPC calls for background daemon added in (Thomas Winget)
9193d6f Daemonize changes pulled in -- daemon builds (Thomas Winget)
2015-03-24 08:53:05 +02:00
Riccardo Spagni
1c49d6b2d3
updated gtest to latest 2015-03-24 08:48:43 +02:00
Thomas Winget
8855a32044
Merge upstream to daemonize changes
Preparation for PR
2015-03-24 02:47:15 -04:00
Thomas Winget
43477b7dac
BerkeleyDB Blockchain building, not working yet
Everything except actually *using* BlockchainBDB is wired up, but the db
itself is not yet working.  Some error about user mem not large enough.
I think I know what this error means, but I can't determine the cause.

Notes: BerkeleyDB does not allow 0-indexing in its recno type databases,
  so block numbers *in the database* will be 1-indexed.  Modifications
  to indexing have been made as needed.
2015-03-16 09:14:51 -04:00
Thomas Winget
cade0da8f1
CMake wiring, minor cleanup, minor test addition
Make Cmake things aware of BerkeleyDB and BlockchainBDB

Make the BlockchainDB unit tests aware of BlockchainBDB
2015-03-16 04:17:53 -04:00
Thomas Winget
5d2a2b7e69
Fixed includes in BlockchainDB unit tests 2015-03-10 15:17:46 -04:00
Thomas Winget
76289d0e3b
Fix tests building -- function signatures changed 2015-03-01 02:21:19 -05:00
Riccardo Spagni
7590f33f9e
move website and DNS unit tests from monero.cc to getmonero.org 2015-02-28 23:32:28 +02:00
rfree2monero
0198ffb220 2014 network limit 1.3 fix log/path/data +utils
+toc -doc -drmonero

Fixed the windows path, and improved logging and data
(for graph) logging, fixed some locks and added more checks.

Still there is a locking error,
not added by my patches, but present in master version
(locking of map/list of peers).
2015-02-24 20:12:56 +01:00
rfree2monero
eabb519605 2014 network limit 1.0a +utils +toc -doc -drmonero
commands and options for network limiting
works very well e.g. for 50 KiB/sec up and down
ToS (QoS) flag
peer number limit
TODO some spikes in ingress/download
TODO problems when other up and down limit
added "otshell utils" - simple logging (with colors, text files channels)
2015-02-20 22:13:00 +01:00
Thomas Winget
5086ca1db5
add BlockchainDB tests to new cmake 2015-01-07 00:48:45 -05:00
Thomas Winget
1240cf805b
BlockchainDB unit tests, lmdb linker flag
Some BlockchainDB unit testing fleshed out (and working), rudimentary
linker flag for lmdb in CMakeLists, but should probably be done
"correctly" at some point (find it on whatever system you're building on
and all that jazz).

update for rebase (warptangent 2015-01-04)
  fix conflicts with upstream CMakeLists.txt files

  tests/CMakeLists.txt (remove edits from original commit)
2015-01-04 19:00:31 -08:00
Thomas Winget
bc44bc19f4 Initial commit of BlockchainDB tests, other misc
miscellaneous changes to BlockchainDB/blockchain as well, namely
replacing instances of std::list with std::vector
2015-01-04 18:41:44 -08:00
Riccardo Spagni
f4b69d553a
year updated in license 2015-01-02 18:52:46 +02:00
Ben Boeckel
01895dd067 cmake: fix up link lines 2014-10-24 15:30:57 -04:00
Ben Boeckel
7d708e4223 cmake: support 2.8.7
Older versions of CMake support LINK_{PUBLIC,PRIVATE} while newer
versions prefer PUBLIC and PRIVATE instead, but still support the LINK_
prefix.
2014-10-24 15:29:51 -04:00
Ben Boeckel
464c2805e5 cmake: fix up miniupnpc's define
It's only necessary on Windows builds and new versions renamed the
define without any compatibility bridge.
2014-10-23 16:43:00 -04:00
Ben Boeckel
8a86ac8439 daemon_tests: update cmake code
It's still not valid, but it's commented out anyways; update to code so
it matches the style at least.
2014-10-23 16:42:34 -04:00
Ben Boeckel
fa3ff75862 gtest: support an external gtest 2014-10-23 16:42:34 -04:00
Ben Boeckel
7bfcffadb9 cmake: put each test executable in its own directory 2014-10-23 16:42:34 -04:00
Riccardo Spagni
699d932461
Merge pull request #182
1795c38 fixed unit tests (Riccardo Spagni)
bc537ac miniupnpc static define change (Riccardo Spagni)
2014-10-23 16:43:39 +02:00
Riccardo Spagni
8eb2375799
Apple and BSD don't need malloc.h 2014-10-20 14:16:16 +02:00
Riccardo Spagni
d6346365c3
removed unecessary mnemonics test 2014-10-15 15:31:32 +02:00
Riccardo Spagni
db5ca73fdd
Merge pull request #176
b94b8cd Added unit test. Fails for Japanese for some reason. (Oran Juice)
4c8a628 Remove iostream header put in during testing (Oran Juice)
9875f5b Variable unique prefix lengths for seed (Oran Juice)
2014-10-15 12:14:49 +02:00
Riccardo Spagni
98a592bc44
fixed conflict in tests CMakeLists 2014-10-15 11:10:04 +02:00
Riccardo Spagni
1795c381c0
fixed unit tests 2014-10-08 21:38:55 +02:00
Oran Juice
b94b8cd798
Added unit test. Fails for Japanese for some reason. 2014-10-08 00:44:26 +05:30
Riccardo Spagni
bc537ac095
miniupnpc static define change 2014-10-07 00:44:44 +02:00
Riccardo Spagni
2cf94c1321
fix for mingw not playing nicely with libunbound configure, fix for correctly finding static libs on various operating systems 2014-10-06 22:29:07 +02:00
Riccardo Spagni
fd52015a2d use the correct CMake variable for static builds 2014-10-06 18:08:33 +02:00
moneromooo-monero
5585a1c60a
tests: add a test for slow_memmem 2014-10-06 14:58:27 +01:00
Riccardo Spagni
8c37823d45 remove pthreads, successfully tested on gcc 4.9.1 without pthreads 2014-10-02 18:54:55 +02:00
Thomas Winget
30caebfce3 reload checkpoints file every ~hr and print if any fail
also some other minor bug squashing and code formatting
2014-09-30 16:21:37 -04:00
Thomas Winget
0e1449135d updated DNSResolver/things that use it for DNSSEC
Note: DNSResolver does not yet *use* DNSSEC, but rather this commit is
preparation for including DNSSEC validation.  The function in
src/wallet/wallet2.cpp that uses DNSResolver still needs its parameters
updated accordingly.
2014-09-30 16:21:37 -04:00
Riccardo Spagni
59a8366bb1 Revert "low risk, potentially varint overflow bug patched thanks to BBR"
This reverts commit 4e2b2b942d.
2014-09-25 08:24:42 +02:00
Riccardo Spagni
4e2b2b942d low risk, potentially varint overflow bug patched thanks to BBR 2014-09-24 22:17:33 -04:00
Riccardo Spagni
f93de2f553
fixed unbound libs in test 2014-09-24 20:42:54 +02:00
Thomas Winget
c14c7e1683 change to allow (at least a bit) for multiple TXT records 2014-09-23 22:58:28 +02:00
Thomas Winget
a5757a628f Monero addres from DNS TXT record implemented, tests pass
Still need to deal with DNSSEC and optional fields in the TXT record.
2014-09-23 22:58:21 +02:00
Thomas Winget
578050e91d ipv4 and ipv6 resolution working
IPv4 and IPv6 name resolution working.
Unit tests written (and passing).
net_node.{h,inl} code modified to use DNS seeds.
2014-09-23 22:58:07 +02:00
Thomas Winget
dea98df6b1 Updated CMake files -- added libunbound linker flag
CMake config file written, but was unable to test/get it working
properly because of a bug in CMake with functions related to
find_package.  Simple "-lunbound" flag used in its stead for now.  May
not build on non-Linux systems, not sure yet.
2014-09-23 22:58:02 +02:00
Zachary Michaels
d03308734b
Separate testnet address prefix 2014-09-15 15:54:59 +02:00
Zachary Michaels
96eed84aad Pass tx and nonce to genesis block constructor 2014-09-15 15:53:50 +02:00
Zachary Michaels
fb4146fa34 Reorganize testnet constants 2014-09-15 15:53:10 +02:00
Zachary Michaels
07470fd400
Add testnet flag
Source: cryptonotefoundation
2014-09-15 15:53:01 +02:00
fluffypony
a40d5c1847 cpu affinity fixes in performance tests for FreeBSD 2014-09-11 11:42:59 +02:00
fluffypony
afc61dda45 gtest patches for FreeBSD 2014-09-11 10:02:24 +02:00
fluffypony
3217ed39ae fixed upnp libs in tests cmake 2014-09-11 08:28:28 +02:00
fluffypony
6fc995fe5d License updated to BSD 3-clause 2014-07-23 15:03:52 +02:00
mikezackles
905b67bc79 Merge pull request #63 from mikezackles/bytecoin_for_merge
Misc fixes from bytecoin
2014-07-17 19:23:49 -04:00
Zachary Michaels
034a1a865e Allow conditional compilation with VS 2013+ 2014-07-01 14:57:27 -04:00
Thomas Winget
2e048a4679 final changes to get transaction splitting building. needs testing. 2014-06-30 07:16:50 -04:00
Zachary Michaels
e84f39ae54 Link to pthreads on non-apple unix 2014-06-11 13:15:23 -04:00
Neozaru
7fea5645e2 'getinfo' daemon HTTP-RPC returns 'target_height' for progress estimations 2014-06-04 22:50:13 +02:00
mydesktop
8d4320b201 add checkpoints.cpp in unit tests 2014-05-25 13:35:54 -04:00
mydesktop
0eba4e0442 extra files 2014-05-25 13:34:31 -04:00
mydesktop
3a3a817678 0.8.8update 2014-05-25 13:06:40 -04:00
mydesktop
333f975760 initial [broken] update 2014-05-03 12:19:43 -04:00
mydesktop
79a4bedc36 mac osx building fixes 2014-04-30 16:50:06 -04:00
mydesktop
67df296650 various fixes to allow mac osx compilation 2014-04-30 13:52:21 -04:00
Antonio Juarez
9682a15400 Port mapping with UPnP 2014-04-09 13:14:35 +01:00
Antonio Juarez
29c2859a3e json rpc for wallet and bugfix 2014-04-02 17:00:17 +01:00
Antonio Juarez
8efa1313f3 some fixes 2014-03-20 11:46:11 +00:00
Antonio Juarez
296ae46ed8 moved all stuff to github 2014-03-03 22:07:58 +00:00