- enables to perform rescan_spent / ki sync with untrusted daemon. Spent check status involves RPC calls which require trusted daemon status as it leaks information. The new call performs soft reset while preserving key images thus a sequence: refresh, ki sync / import, rescan_bc keep_ki will correctly perform spent checking without need for trusted daemon.
- useful to detect spent outputs with untrusted daemon on watch_only / multisig / hw-cold wallets after expensive key image sync.
- cli: rescan_bc keep_ki
It's better to just ignore them, the user does not really need
to know they're here. If the mask is wrong, they'll fail to be
used, and sweeping will fail as it tries to use it.
Reported by Josh Davis.
- return the right output data when offset is not zero
- do not consider import failed if result height is zero
(it can be 0 if unknown)
- select the right tx pubkey when using subaddresses (it's faster,
and we might select the wrong one if we got an output using one
of the additional tx keys)
- account for skipped outputs for spent/unspent balance info
"spent" is arguably wrong, since it will count spent change
multiple times as it goes through receive/spend cycles.
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
23813c71 blockchain: add --reorg-notify (moneromooo-monero)
f6db59b0 notify: handle arbitrary tags (moneromooo-monero)
ff959216 notify: warn if the spec contains one of '"\ (moneromooo-monero)
13852678 common: set MONERO_DEFAULT_LOG_CATEGORY for notify and spawn (moneromooo-monero)
b6534c40 ringct: remove unused senderPk from ecdhTuple (moneromooo-monero)
7d375981 ringct: the commitment mask is now deterministic (moneromooo-monero)
99d946e6 ringct: encode 8 byte amount, saving 24 bytes per output (moneromooo-monero)
cdc3ccec ringct: save 3 bytes on bulletproof size (moneromooo-monero)
f931e16c add a bulletproof version, new bulletproof type, and rct config (moneromooo-monero)
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
c6d38718 core: include a dummy encrypted payment id when no payment is used (moneromooo-monero)
b7441c4a core, wallet: remember original text version of destination address (moneromooo-monero)
a9b1c04a crptonote_core: do not error out sending unparsable extra field (moneromooo-monero)
Half of the patch was correct, but half was introducing another bug,
where a wallet asking for a fork that the daemon does not know about
yet would decide to use those rules.
This avoids the constant message about needed to run refresh
to enter a password.
Also mention the txpool when asking for the password if the
reason is a pool tx.
- docker protobuf dependencies, cross-compilation
- device/trezor protobuf build fixes, try_compile
- libusb built under all platforms, used by trezor for direct connect
When doing a first refresh on HW-token based wallet KI sync is required if money were received. Received money may indicate wallet was already used before the restore I.e., some transaction could have been already sent from the wallet. The spent UTXO would not be detected as spent which could lead to double spending errors on submitting a new transaction.
Thus if the wallet is HW-token based with the cold signing protocol and the first refresh detected received money the user is asked to perform the key image sync.
- adds a new option `--hw-device-deriv-path` to the simple wallet. Enables to specify wallet derivation path / wallet code (path avoided so it can be misinterpreted as a file path).
- devices can use different derivation mechanisms. Trezor uses standard SLIP-10 mechanism with fixed SLIP-44 prefix for Monero
- Trezor: when empty, the default derivation mechanism is used with 44'/128'/0'. When entered the derivation path is 44'/128'/PATH.
- Trezor: the path is always taken as elements are hardened (1<<31 bit turned on)
aee7a4e3 wallet_rpc_server: do not use RPC data if the call failed (moneromooo-monero)
1a0733e5 windows_service: fix memory leak (moneromooo-monero)
0dac3c64 unit_tests: do not rethrow a copy of an exception (moneromooo-monero)
5d9915ab cryptonote: fix get_unit for non default settings (moneromooo-monero)
d4f50cb1 remove some unused code (moneromooo-monero)
61163971 a few minor (but easy) performance tweaks (moneromooo-monero)
30023074 tests: slow_memmem now returns size_t (moneromooo-monero)
- simple device callback object added. Device can request passphrase/PIN entry via the callback or notify user some action is required
- callback is routed to wallet2, which routes the callback to i_wallet_callback so CLI or GUI wallets can support passphrase entry for HW tokens
- wallet: device open needs wallet callback first - passphrase protected device needs wallet callback so user can enter passphrase
Motivated by https://monero.stackexchange.com/questions/10483
Some exchanges appear to have customized the wallet software
in an inappropriate way, making the tx extra field partially
unreadable. PR #3716 changed the wallet behavior disallowing
such partially valid tx extra.
An example tx reported by the user is
e87c675a85f34ecac58a8846613d25062f1813e1023c552b705afad32b972c38
where the normal tx pubkey appears again with the aditional
tx pubkeys tag `04` which is inappropriate.
15:43 < hahsun> Im on stagenet and I suddenly get this exception: 2018-11-04 14:42:52.416 [RPC0] ERROR wallet.wallet2 src/wallet/wallet2.cpp:2070 !m_blockchain.is_in_bounds(current_index). THROW EXCEPTION: error::out_of_hashchain_bounds_error
16:01 <+moneromooo> OK, possibly because the blckchain is always seeded with the genesis block hash...
16:02 <+moneromooo> So that case should be allowed, assuming it doesn't break the code around it.
16:05 <+moneromooo> OK if stop_height == size || (size==1 && stop_heigt ==0)
16:05 <+moneromooo> Throw if not that.
16:06 < hahsun> k
It seems the more prudent thing to do here. It will not catch
attempts to use that value before it is initialized when using
ASAN or valgrind, but in a case where it does, it will have
smaller repercussions.
So it seems appropriate in this particular case.
Coverity 182498
Even if it is never relayed, it ensures a daemon supplying
fake outs on demand will never be asked for a set with the
real input being the only intersecting member (only a problem
with people who trust their privacy to some stranger's node,
but it seems to be a massively common thing, even in Monero)
3ffbec15 rpc: init m_rpc_version in Message ctor (moneromooo-monero)
bfa2dce1 rpc: remove unused ctors (moneromooo-monero)
7cc39845 account: init creation timestamp to 0 (moneromooo-monero)
32123789 wallet2: initialize some scalar fields in ctor where appropriate (moneromooo-monero)
4eca42b2 blockchain_db: initialize m_hardfork in ctor just in case (moneromooo-monero)
9acf42d3 Multisig M/N functionality core tests added (naughtyfox)
9f3963e8 Arbitrary M/N multisig schemes: * support in wallet2 * support in monero-wallet-cli * support in monero-wallet-rpc * support in wallet api * support in monero-gen-trusted-multisig * unit tests for multisig wallets creation (naughtyfox)