This improves blockchain reorganization time by allowing one of the more
expensive DB lookups when popping a block to not have to seek through a
long dup list in the "output_amounts" subdb. This is most noticeable for
HDDs.
As before, the dup list is still walked if necessary (but in reverse),
and the global output index still confirmed to be the one looked for.
But under proper use, the result will be found at the end of the dup
list, so we start there.
Removing an amount output index is always done in the context of popping
a block, so the global output index being looked for should be the last
one in that amount key's dup list. Even if the txs themselves aren't
removed in reverse order (supposed to be according to original
implementation), the specified amount output index will still be near
the end, because the txs are in the same block.
TEST:
Pop blocks with blockchain_import.
Blocks should be successfully removed with no errors shown.
bitmonerod should be able to start syncing from the reduced blockchain
height.
cbded43 core_tests: fix ring_signature_1 tests (moneromooo-monero)
c3d208f core_tests: bump default test fee to 0.02 monero (moneromooo-monero)
10da0a0 add a --fakechain argument for tests (moneromooo-monero)
eee44e6 unit_tests: fix block reward test using post hard fork settings (moneromooo-monero)
595893f blockchain: log block (not chain) height in "BLOCK SUCCESFULLY ADDED" (moneromooo-monero)
2369968 blockchain: fix off by one in get_blocks (moneromooo-monero)
8af913a db_lmdb: implement BlockchainLMDB::reset (moneromooo-monero)
4833f4f db_bdb: implement BlockchainBDB::reset (moneromooo-monero)
18bf06e tx_pool: fix "minumim" typo in message (moneromooo-monero)
44f1267 tests: fix a typo in test name (moneromooo-monero)
1494557 db_lmdb: create all needed directories, not just the leaf one (moneromooo-monero)
015b68a db_bdb: create all needed directories, not just the leaf one (moneromooo-monero)
f141869 tests: remove data-dir argument registration (moneromooo-monero)
When throwing an exception from being unable to begin an LMDB
transaction, include the reason.
It's often been due to a write transaction attempted within a write
transaction (batch mode), but there can be other reasons such as write
transaction attempted while database was opened read only, or
environment's map needs to be resized.
Data is only guaranteed to be valid within the lifetime of a txn.
You cannot use data returned from LMDB after the txn ends.
Also, fixed a missing txn.commit BlockchainLMDB::get_tx_unlock_time()
This is a precaution for older Berkeley DB versions.
- smooth reports an issue running with 4.7:
DB_ENV->log_set_config: DB_LOG_IN_MEMORY: method not permitted
after handle's open method
- this works just fine with 5.3
- we do not use DB_LOG_IN_MEMORY, but we use DB_LOG_AUTO_REMOVE
- libdb docs say some flags must be set before open, and some
may be set at any time, but never say some must be set after
open
- moving the call to log_set_config before open works with 5.3
Therefore, it seems best to move the call before open.
Early DB versions did not store key images for inputs if the
transaction spending them had no outputs (ie, all fee). This
is not correct, as this would allow these outputs to be double
spent. This was fixed in 533acc30ed
a few months ago, but databases having synced blocks 2021612 and
685498 with a faulty version will be missing those key images
in the spent keys database. This code checks for this, and adds
those key images if they are missing.
It looks like some of the indices passed to the DB access functions
are already bumped by 1. Moreover, the existing code was not
throwing DB errors with 0 keys, and this is unlikely if it really
was using 0 keys. Last, this patch broke sync from scratch in at
least one case. So I'm calling it bad and reverting it.
This reverts commit bfc97401ae81bb30278a318de7f048c653bf6582.
The original code removed key images from a tx from the blockchain
when an non to-key nor gen input was found in that tx. Additionally,
the remainder of the tx data was added to the blockchain only after
the double spend check passed.
It was only used by the older blockchain_storage.
We also move the code to the calling blockchain level, to avoid
replicating the code in every DB implementation. This also makes
the get_random_out method obsolete, and we delete it.
If there's no blocks in database (m_height == 0):
Don't assign incorrect block range to check.
Skip average block size check.
Test:
Run blockchain_converter with an existing source blockchain.bin and
a non-existent LMDB destination database.
The converter creates a BlockchainLMDB instance with zero height, due to
not being initialized with a genesis block, normally done by
Blockchain::init(). While different than the behavior of bitmonerod,
blockchain_import, and blockchain_export, the initialization hasn't been
strictly necessary.
The db batch size estimation normally uses an average block size, or a
default minimum block size, whichever is greater. In this case, as
there's no existing blocks to check for an average block size, the
default should be used.
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
This currently only affects blockchain_import and blockchain_converter.
When the number of blocks expected for the batch transaction is
provided, make an estimate of the DB space needed. If not enough free
space remains, resize the DB.
The estimate is made based on:
- the average size of the last 500 blocks, or if larger, a min. block
size of 4k
- a factor for the expanded size a block occupies in the DB across the
sub-dbs/tables
- a safety factor (1.7) to allow for a "reasonable" average block size
increase over the batch
Increase the DB size by whichever is greater: the estimated size needed
or a minimum increase size, currently 128 MB.
The conservative factors in the estimate help in testing that the resize
occurs when needed, and without gratuitous size increases. For common
use, the safety factor and minimum increase size could reasonably be
increased.
For testing, setting DEFAULT_MAPSIZE (blockchain_db/lmdb/db_lmdb.h) to 1
<< 27 (128 MB) and recompiling will ensure DB resizes take place sooner
and more frequently.
5680604 Replace hardcoded value with existing constant of same value (warptangent)
f37ee2f Update database resize behavior (warptangent)
f85cd8e Include database error in more error messages (warptangent)
Some filesystems (*cough* NTFS *cough*) aren't good with sparse files,
so this makes LMDB dynamically resize its mapsize as needed. Note: the
check interval is currently every 10 blocks (for testing) and will
probably need to change to 1000 or something. Default mapsize set to
1GiB.
Blockchain conversion tools using batching will probably segfault, I'll
fix that in the next commit.
There will need to be some more refactoring for these changes to be
considered complete/correct, but for now it's working.
new daemon cli argument "--db-type", works for LMDB and BerkeleyDB.
A good deal of refactoring is also present in this commit, namely
Blockchain no longer instantiates BlockchainDB, but rather is passed a
pointer to an already-instantiated BlockchainDB on init().
Everything except actually *using* BlockchainBDB is wired up, but the db
itself is not yet working. Some error about user mem not large enough.
I think I know what this error means, but I can't determine the cause.
Notes: BerkeleyDB does not allow 0-indexing in its recno type databases,
so block numbers *in the database* will be 1-indexed. Modifications
to indexing have been made as needed.
LMDB implementation code copy/paste/modified into the Berkeley DB
implementation. Need to test if it builds, then if it works, and so on,
but the code is all there.
Add support to:
- BlockchainDB, BlockchainLMDB
- blockchain_import utility to open LMDB database with one or more
LMDB flags.
Sample use:
$ blockchain_import --database lmdb#nosync
$ blockchain_import --database lmdb#nosync,nometasync
In order to make things more general, BlockchainDB now has get_db_name()
which should return a string with the "name" of that type of db.
This "name" will be the subfolder name that holds that db type's files
within the monero folder.
Small bugfix: blockchain_converter was not correctly appending this in
the prior hard-coded-string implementation of the subfolder data
directory concept.
Ostensibly janitorial work, but should be more relevant later down the
line. Things that depend on core cryptonote things (i.e.
cryptonote_core) don't necessarily depend on BlockchainDB and thus
have no need to have BlockchainDB baked in with them.
