wownero/CMakeLists.txt

499 lines
17 KiB
CMake
Raw Normal View History

2015-12-31 06:39:56 +00:00
# Copyright (c) 2014-2016, The Monero Project
#
2014-09-11 06:25:07 +00:00
# All rights reserved.
#
2014-09-11 06:25:07 +00:00
# Redistribution and use in source and binary forms, with or without modification, are
# permitted provided that the following conditions are met:
#
2014-09-11 06:25:07 +00:00
# 1. Redistributions of source code must retain the above copyright notice, this list of
# conditions and the following disclaimer.
#
2014-09-11 06:25:07 +00:00
# 2. Redistributions in binary form must reproduce the above copyright notice, this list
# of conditions and the following disclaimer in the documentation and/or other
# materials provided with the distribution.
#
2014-09-11 06:25:07 +00:00
# 3. Neither the name of the copyright holder nor the names of its contributors may be
# used to endorse or promote products derived from this software without specific
# prior written permission.
#
2014-09-11 06:25:07 +00:00
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
2014-09-11 06:25:07 +00:00
# Parts of this file are originally copyright (c) 2012-2013 The Cryptonote developers
cmake_minimum_required(VERSION 2.8.7)
2014-03-03 22:07:58 +00:00
2014-10-23 18:03:54 +00:00
project(bitmonero)
function (die msg)
if (NOT WIN32)
string(ASCII 27 Esc)
set(ColourReset "${Esc}[m")
set(BoldRed "${Esc}[1;31m")
else ()
set(ColourReset "")
set(BoldRed "")
endif ()
message(FATAL_ERROR "${BoldRed}${msg}${ColourReset}")
endfunction ()
if ("${ARCH}" STREQUAL "" OR "${ARCH}" STREQUAL "native")
set(ARCH ${CMAKE_SYSTEM_PROCESSOR})
message(STATUS "Building natively on ${ARCH}")
endif()
if (NOT "${ARCH}" STREQUAL "")
string(SUBSTRING ${ARCH} 0 3 IS_ARM)
string(TOLOWER ${IS_ARM} IS_ARM)
if (${IS_ARM} STREQUAL "arm")
string(SUBSTRING ${ARCH} 0 5 ARM_TEST)
string(TOLOWER ${ARM_TEST} ARM_TEST)
if (${ARM_TEST} STREQUAL "armv6")
set(ARM6 1)
else()
set(ARM6 0)
endif()
if (${ARM_TEST} STREQUAL "armv7")
set(ARM7 1)
else()
set(ARM7 0)
endif()
endif()
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY) Bockchain: 1. Optim: Multi-thread long-hash computation when encountering groups of blocks. 2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible. 3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible. 4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks. 5. Optim: Multi-thread signature computation whenever possible. 6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD) 7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???). 8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads). Berkeley-DB: 1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc). 2. Fix: Unable to pop blocks on reorganize due to transaction errors. 3. Patch: Large number of transaction aborts when running multi-threaded bulk queries. 4. Patch: Insufficient locks error when running full sync. 5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation. 6. Optim: Add bulk queries to get output global indices. 7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 9. Optim: Added thread-safe buffers used when multi-threading bulk queries. 10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details) 11. Mod: Added checkpoint thread and auto-remove-logs option. 12. *Now usable on 32-bit systems like RPI2. LMDB: 1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect) 2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details) 5. Mod: Auto resize to +1GB instead of multiplier x1.5 ETC: 1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete. 2. Fix: 32-bit saturation bug when computing next difficulty on large blocks. [PENDING ISSUES] 1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization. This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD. 2. Berkeley db, possible bug "unable to allocate memory". TBD. [NEW OPTIONS] (*Currently all enabled for testing purposes) 1. --fast-block-sync arg=[0:1] (default: 1) a. 0 = Compute long hash per block (may take a while depending on CPU) b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence) 2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000) a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions. b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache. Fast - Write meta-data but defer data flush. Fastest - Defer meta-data and data flush. Sync - Flush data after nblocks_per_sync and wait. Async - Flush data after nblocks_per_sync but do not wait for the operation to finish. 3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower) Max number of threads to use when computing long-hash in groups. 4. --show-time-stats arg=[0:1] (default: 1) Show benchmark related time stats. 5. --db-auto-remove-logs arg=[0:1] (default: 1) For berkeley-db only. Auto remove logs if enabled. **Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version. At the moment, you need a full resync to use this optimized version. [PERFORMANCE COMPARISON] **Some figures are approximations only. Using a baseline machine of an i7-2600K+SSD+(with full pow computation): 1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain. 2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain. 3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain. Averate procesing times (with full pow computation): lmdb-optimized: 1. tx_ave = 2.5 ms / tx 2. block_ave = 5.87 ms / block memory-official-repo: 1. tx_ave = 8.85 ms / tx 2. block_ave = 19.68 ms / block lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e) 1. tx_ave = 47.8 ms / tx 2. block_ave = 64.2 ms / block **Note: The following data denotes processing times only (does not include p2p download time) lmdb-optimized processing times (with full pow computation): 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000). 2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000). 3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000). lmdb-optimized processing times (with per-block-checkpoint) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with full pow computation) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000). 2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with per-block-checkpoint) 1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
endif()
if(WIN32 OR ARM7 OR ARM6)
set(CMAKE_C_FLAGS_RELEASE "-O2 -DNDEBUG")
set(CMAKE_CXX_FLAGS_RELEASE "-O2 -DNDEBUG")
else()
set(CMAKE_C_FLAGS_RELEASE "-Ofast -DNDEBUG -Wno-unused-variable")
set(CMAKE_CXX_FLAGS_RELEASE "-Ofast -DNDEBUG -Wno-unused-variable")
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY) Bockchain: 1. Optim: Multi-thread long-hash computation when encountering groups of blocks. 2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible. 3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible. 4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks. 5. Optim: Multi-thread signature computation whenever possible. 6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD) 7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???). 8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads). Berkeley-DB: 1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc). 2. Fix: Unable to pop blocks on reorganize due to transaction errors. 3. Patch: Large number of transaction aborts when running multi-threaded bulk queries. 4. Patch: Insufficient locks error when running full sync. 5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation. 6. Optim: Add bulk queries to get output global indices. 7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 9. Optim: Added thread-safe buffers used when multi-threading bulk queries. 10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details) 11. Mod: Added checkpoint thread and auto-remove-logs option. 12. *Now usable on 32-bit systems like RPI2. LMDB: 1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect) 2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details) 5. Mod: Auto resize to +1GB instead of multiplier x1.5 ETC: 1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete. 2. Fix: 32-bit saturation bug when computing next difficulty on large blocks. [PENDING ISSUES] 1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization. This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD. 2. Berkeley db, possible bug "unable to allocate memory". TBD. [NEW OPTIONS] (*Currently all enabled for testing purposes) 1. --fast-block-sync arg=[0:1] (default: 1) a. 0 = Compute long hash per block (may take a while depending on CPU) b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence) 2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000) a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions. b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache. Fast - Write meta-data but defer data flush. Fastest - Defer meta-data and data flush. Sync - Flush data after nblocks_per_sync and wait. Async - Flush data after nblocks_per_sync but do not wait for the operation to finish. 3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower) Max number of threads to use when computing long-hash in groups. 4. --show-time-stats arg=[0:1] (default: 1) Show benchmark related time stats. 5. --db-auto-remove-logs arg=[0:1] (default: 1) For berkeley-db only. Auto remove logs if enabled. **Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version. At the moment, you need a full resync to use this optimized version. [PERFORMANCE COMPARISON] **Some figures are approximations only. Using a baseline machine of an i7-2600K+SSD+(with full pow computation): 1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain. 2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain. 3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain. Averate procesing times (with full pow computation): lmdb-optimized: 1. tx_ave = 2.5 ms / tx 2. block_ave = 5.87 ms / block memory-official-repo: 1. tx_ave = 8.85 ms / tx 2. block_ave = 19.68 ms / block lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e) 1. tx_ave = 47.8 ms / tx 2. block_ave = 64.2 ms / block **Note: The following data denotes processing times only (does not include p2p download time) lmdb-optimized processing times (with full pow computation): 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000). 2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000). 3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000). lmdb-optimized processing times (with per-block-checkpoint) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with full pow computation) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000). 2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with per-block-checkpoint) 1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
endif()
# set this to 0 if per-block checkpoint needs to be disabled
set(PER_BLOCK_CHECKPOINT 1)
if(PER_BLOCK_CHECKPOINT)
add_definitions("-DPER_BLOCK_CHECKPOINT")
endif()
2014-10-22 19:17:52 +00:00
list(INSERT CMAKE_MODULE_PATH 0
"${CMAKE_SOURCE_DIR}/cmake")
if (NOT DEFINED ENV{DEVELOPER_LOCAL_TOOLS})
message(STATUS "Could not find DEVELOPER_LOCAL_TOOLS in env (not required)")
set(BOOST_IGNORE_SYSTEM_PATHS_DEFAULT OFF)
elseif ("$ENV{DEVELOPER_LOCAL_TOOLS}" EQUAL 1)
message(STATUS "Found: env DEVELOPER_LOCAL_TOOLS = 1")
set(BOOST_IGNORE_SYSTEM_PATHS_DEFAULT ON)
else()
message(STATUS "Found: env DEVELOPER_LOCAL_TOOLS = 0")
set(BOOST_IGNORE_SYSTEM_PATHS_DEFAULT OFF)
endif()
message(STATUS "BOOST_IGNORE_SYSTEM_PATHS defaults to ${BOOST_IGNORE_SYSTEM_PATHS_DEFAULT}")
option(BOOST_IGNORE_SYSTEM_PATHS "Ignore boost system paths for local boost installation" ${BOOST_IGNORE_SYSTEM_PATHS_DEFAULT})
if (NOT DEFINED ENV{DEVELOPER_LIBUNBOUND_OLD})
message(STATUS "Could not find DEVELOPER_LIBUNBOUND_OLD in env (not required)")
elseif ("$ENV{DEVELOPER_LIBUNBOUND_OLD}" EQUAL 1)
message(STATUS "Found: env DEVELOPER_LIBUNBOUND_OLD = 1, will use the work around")
add_definitions(-DDEVELOPER_LIBUNBOUND_OLD)
elseif ("$ENV{DEVELOPER_LIBUNBOUND_OLD}" EQUAL 0)
message(STATUS "Found: env DEVELOPER_LIBUNBOUND_OLD = 0")
else()
message(STATUS "Found: env DEVELOPER_LIBUNBOUND_OLD with bad value. Will NOT use the work around")
endif()
2014-03-03 22:07:58 +00:00
set_property(GLOBAL PROPERTY USE_FOLDERS ON)
enable_testing()
option(BUILD_DOCUMENTATION "Build the Doxygen documentation." ON)
# Check whether we're on a 32-bit or 64-bit system
if(CMAKE_SIZEOF_VOID_P EQUAL "8")
2015-03-02 16:04:58 +00:00
set(DEFAULT_BUILD_64 ON)
else()
2015-03-02 16:04:58 +00:00
set(DEFAULT_BUILD_64 OFF)
endif()
2015-03-03 19:57:40 +00:00
option(BUILD_64 "Build for 64-bit? 'OFF' builds for 32-bit." ${DEFAULT_BUILD_64})
2015-03-02 16:04:58 +00:00
if(BUILD_64)
set(ARCH_WIDTH "64")
else()
set(ARCH_WIDTH "32")
endif()
message(STATUS "Building for a ${ARCH_WIDTH}-bit system")
# Check if we're on FreeBSD so we can exclude the local miniupnpc (it should be installed from ports instead)
# CMAKE_SYSTEM_NAME checks are commonly known, but specifically taken from libsdl's CMakeLists
if(CMAKE_SYSTEM_NAME MATCHES "kFreeBSD.*")
set(FREEBSD TRUE)
elseif(CMAKE_SYSTEM_NAME MATCHES "DragonFly.*|FreeBSD")
set(FREEBSD TRUE)
endif()
# Check if we're on OpenBSD. See the README.md for build instructions.
2016-01-21 18:18:26 +00:00
if(CMAKE_SYSTEM_NAME MATCHES "kOpenBSD.*|OpenBSD.*")
set(OPENBSD TRUE)
endif()
# TODO: check bsdi, NetBSD, to see if they need the same FreeBSD changes
#
# elseif(CMAKE_SYSTEM_NAME MATCHES "kNetBSD.*|NetBSD.*")
# set(NETBSD TRUE)
# elseif(CMAKE_SYSTEM_NAME MATCHES ".*BSDI.*")
# set(BSDI TRUE)
2014-04-09 12:14:35 +00:00
include_directories(src contrib/epee/include external "${CMAKE_BINARY_DIR}/version")
2014-03-03 22:07:58 +00:00
if(APPLE)
2014-04-30 20:50:06 +00:00
include_directories(SYSTEM /usr/include/malloc)
endif()
if(MSVC OR MINGW)
set(DEFAULT_STATIC true)
else()
set(DEFAULT_STATIC false)
endif()
2014-10-21 18:20:26 +00:00
option(STATIC "Link libraries statically" ${DEFAULT_STATIC})
2014-03-03 22:07:58 +00:00
if(MINGW)
string(REGEX MATCH "^[^/]:/[^/]*" msys2_install_path "${CMAKE_C_COMPILER}")
message(STATUS "MSYS location: ${msys2_install_path}")
set(CMAKE_INCLUDE_PATH "${msys2_install_path}/mingw${ARCH_WIDTH}/include")
# This is necessary because otherwise CMake will make Boost libraries -lfoo
# rather than a full path. Unfortunately, this makes the shared libraries get
# linked due to a bug in CMake which misses putting -static flags around the
# -lfoo arguments.
set(DEFLIB ${msys2_install_path}/mingw${ARCH_WIDTH}/lib)
list(REMOVE_ITEM CMAKE_C_IMPLICIT_LINK_DIRECTORIES ${DEFLIB})
list(REMOVE_ITEM CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES ${DEFLIB})
endif()
if(STATIC)
if(MSVC)
set(CMAKE_FIND_LIBRARY_SUFFIXES .lib .dll.a .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
else()
set(CMAKE_FIND_LIBRARY_SUFFIXES .a ${CMAKE_FIND_LIBRARY_SUFFIXES})
endif()
endif()
# default database:
# should be lmdb for testing, memory for production still
# set(DATABASE memory)
set(DATABASE lmdb)
if (DEFINED ENV{DATABASE})
set(DATABASE $ENV{DATABASE})
message(STATUS "DATABASE set: ${DATABASE}")
else()
message(STATUS "Could not find DATABASE in env (not required unless you want to change database type from default: ${DATABASE})")
endif()
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY) Bockchain: 1. Optim: Multi-thread long-hash computation when encountering groups of blocks. 2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible. 3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible. 4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks. 5. Optim: Multi-thread signature computation whenever possible. 6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD) 7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???). 8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads). Berkeley-DB: 1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc). 2. Fix: Unable to pop blocks on reorganize due to transaction errors. 3. Patch: Large number of transaction aborts when running multi-threaded bulk queries. 4. Patch: Insufficient locks error when running full sync. 5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation. 6. Optim: Add bulk queries to get output global indices. 7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 9. Optim: Added thread-safe buffers used when multi-threading bulk queries. 10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details) 11. Mod: Added checkpoint thread and auto-remove-logs option. 12. *Now usable on 32-bit systems like RPI2. LMDB: 1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect) 2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details) 5. Mod: Auto resize to +1GB instead of multiplier x1.5 ETC: 1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete. 2. Fix: 32-bit saturation bug when computing next difficulty on large blocks. [PENDING ISSUES] 1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization. This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD. 2. Berkeley db, possible bug "unable to allocate memory". TBD. [NEW OPTIONS] (*Currently all enabled for testing purposes) 1. --fast-block-sync arg=[0:1] (default: 1) a. 0 = Compute long hash per block (may take a while depending on CPU) b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence) 2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000) a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions. b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache. Fast - Write meta-data but defer data flush. Fastest - Defer meta-data and data flush. Sync - Flush data after nblocks_per_sync and wait. Async - Flush data after nblocks_per_sync but do not wait for the operation to finish. 3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower) Max number of threads to use when computing long-hash in groups. 4. --show-time-stats arg=[0:1] (default: 1) Show benchmark related time stats. 5. --db-auto-remove-logs arg=[0:1] (default: 1) For berkeley-db only. Auto remove logs if enabled. **Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version. At the moment, you need a full resync to use this optimized version. [PERFORMANCE COMPARISON] **Some figures are approximations only. Using a baseline machine of an i7-2600K+SSD+(with full pow computation): 1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain. 2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain. 3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain. Averate procesing times (with full pow computation): lmdb-optimized: 1. tx_ave = 2.5 ms / tx 2. block_ave = 5.87 ms / block memory-official-repo: 1. tx_ave = 8.85 ms / tx 2. block_ave = 19.68 ms / block lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e) 1. tx_ave = 47.8 ms / tx 2. block_ave = 64.2 ms / block **Note: The following data denotes processing times only (does not include p2p download time) lmdb-optimized processing times (with full pow computation): 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000). 2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000). 3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000). lmdb-optimized processing times (with per-block-checkpoint) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with full pow computation) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000). 2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with per-block-checkpoint) 1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
set(BERKELEY_DB_OVERRIDE 0)
if (DEFINED ENV{BERKELEY_DB})
set(BERKELEY_DB_OVERRIDE 1)
set(BERKELEY_DB $ENV{BERKELEY_DB})
elseif()
set(BERKELEY_DB 0)
endif()
if (DATABASE STREQUAL "lmdb")
message(STATUS "Using LMDB as default DB type")
set(BLOCKCHAIN_DB DB_LMDB)
add_definitions("-DDEFAULT_DB_TYPE=\"lmdb\"")
elseif (DATABASE STREQUAL "berkeleydb")
find_package(BerkeleyDB)
if(NOT BERKELEY_DB)
die("Found BerkeleyDB includes, but could not find BerkeleyDB library. Please make sure you have installed libdb and libdb-dev / libdb++-dev or the equivalent.")
else()
message(STATUS "Found BerkeleyDB include (db.h) in ${BERKELEY_DB_INCLUDE_DIR}")
if(BERKELEY_DB_LIBRARIES)
message(STATUS "Found BerkeleyDB shared library")
set(BDB_STATIC false CACHE BOOL "BDB Static flag")
set(BDB_INCLUDE ${BERKELEY_DB_INCLUDE_DIR} CACHE STRING "BDB include path")
set(BDB_LIBRARY ${BERKELEY_DB_LIBRARIES} CACHE STRING "BDB library name")
set(BDB_LIBRARY_DIRS "" CACHE STRING "BDB Library dirs")
set(BERKELEY_DB 1)
else()
die("Found BerkeleyDB includes, but could not find BerkeleyDB library. Please make sure you have installed libdb and libdb-dev / libdb++-dev or the equivalent.")
endif()
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY) Bockchain: 1. Optim: Multi-thread long-hash computation when encountering groups of blocks. 2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible. 3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible. 4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks. 5. Optim: Multi-thread signature computation whenever possible. 6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD) 7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???). 8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads). Berkeley-DB: 1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc). 2. Fix: Unable to pop blocks on reorganize due to transaction errors. 3. Patch: Large number of transaction aborts when running multi-threaded bulk queries. 4. Patch: Insufficient locks error when running full sync. 5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation. 6. Optim: Add bulk queries to get output global indices. 7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 9. Optim: Added thread-safe buffers used when multi-threading bulk queries. 10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details) 11. Mod: Added checkpoint thread and auto-remove-logs option. 12. *Now usable on 32-bit systems like RPI2. LMDB: 1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect) 2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details) 5. Mod: Auto resize to +1GB instead of multiplier x1.5 ETC: 1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete. 2. Fix: 32-bit saturation bug when computing next difficulty on large blocks. [PENDING ISSUES] 1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization. This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD. 2. Berkeley db, possible bug "unable to allocate memory". TBD. [NEW OPTIONS] (*Currently all enabled for testing purposes) 1. --fast-block-sync arg=[0:1] (default: 1) a. 0 = Compute long hash per block (may take a while depending on CPU) b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence) 2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000) a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions. b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache. Fast - Write meta-data but defer data flush. Fastest - Defer meta-data and data flush. Sync - Flush data after nblocks_per_sync and wait. Async - Flush data after nblocks_per_sync but do not wait for the operation to finish. 3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower) Max number of threads to use when computing long-hash in groups. 4. --show-time-stats arg=[0:1] (default: 1) Show benchmark related time stats. 5. --db-auto-remove-logs arg=[0:1] (default: 1) For berkeley-db only. Auto remove logs if enabled. **Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version. At the moment, you need a full resync to use this optimized version. [PERFORMANCE COMPARISON] **Some figures are approximations only. Using a baseline machine of an i7-2600K+SSD+(with full pow computation): 1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain. 2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain. 3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain. Averate procesing times (with full pow computation): lmdb-optimized: 1. tx_ave = 2.5 ms / tx 2. block_ave = 5.87 ms / block memory-official-repo: 1. tx_ave = 8.85 ms / tx 2. block_ave = 19.68 ms / block lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e) 1. tx_ave = 47.8 ms / tx 2. block_ave = 64.2 ms / block **Note: The following data denotes processing times only (does not include p2p download time) lmdb-optimized processing times (with full pow computation): 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000). 2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000). 3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000). lmdb-optimized processing times (with per-block-checkpoint) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with full pow computation) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000). 2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with per-block-checkpoint) 1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
endif()
message(STATUS "Using Berkeley DB as default DB type")
add_definitions("-DDEFAULT_DB_TYPE=\"berkeley\"")
elseif (DATABASE STREQUAL "memory")
set(BLOCKCHAIN_DB DB_MEMORY)
message(STATUS "Using Serialised In Memory as default DB type")
add_definitions("-DDEFAULT_DB_TYPE=\"memory\"")
else()
die("Invalid database type: ${DATABASE}")
endif()
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY) Bockchain: 1. Optim: Multi-thread long-hash computation when encountering groups of blocks. 2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible. 3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible. 4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks. 5. Optim: Multi-thread signature computation whenever possible. 6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD) 7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???). 8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads). Berkeley-DB: 1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc). 2. Fix: Unable to pop blocks on reorganize due to transaction errors. 3. Patch: Large number of transaction aborts when running multi-threaded bulk queries. 4. Patch: Insufficient locks error when running full sync. 5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation. 6. Optim: Add bulk queries to get output global indices. 7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 9. Optim: Added thread-safe buffers used when multi-threading bulk queries. 10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details) 11. Mod: Added checkpoint thread and auto-remove-logs option. 12. *Now usable on 32-bit systems like RPI2. LMDB: 1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect) 2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details) 5. Mod: Auto resize to +1GB instead of multiplier x1.5 ETC: 1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete. 2. Fix: 32-bit saturation bug when computing next difficulty on large blocks. [PENDING ISSUES] 1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization. This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD. 2. Berkeley db, possible bug "unable to allocate memory". TBD. [NEW OPTIONS] (*Currently all enabled for testing purposes) 1. --fast-block-sync arg=[0:1] (default: 1) a. 0 = Compute long hash per block (may take a while depending on CPU) b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence) 2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000) a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions. b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache. Fast - Write meta-data but defer data flush. Fastest - Defer meta-data and data flush. Sync - Flush data after nblocks_per_sync and wait. Async - Flush data after nblocks_per_sync but do not wait for the operation to finish. 3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower) Max number of threads to use when computing long-hash in groups. 4. --show-time-stats arg=[0:1] (default: 1) Show benchmark related time stats. 5. --db-auto-remove-logs arg=[0:1] (default: 1) For berkeley-db only. Auto remove logs if enabled. **Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version. At the moment, you need a full resync to use this optimized version. [PERFORMANCE COMPARISON] **Some figures are approximations only. Using a baseline machine of an i7-2600K+SSD+(with full pow computation): 1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain. 2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain. 3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain. Averate procesing times (with full pow computation): lmdb-optimized: 1. tx_ave = 2.5 ms / tx 2. block_ave = 5.87 ms / block memory-official-repo: 1. tx_ave = 8.85 ms / tx 2. block_ave = 19.68 ms / block lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e) 1. tx_ave = 47.8 ms / tx 2. block_ave = 64.2 ms / block **Note: The following data denotes processing times only (does not include p2p download time) lmdb-optimized processing times (with full pow computation): 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000). 2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000). 3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000). lmdb-optimized processing times (with per-block-checkpoint) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with full pow computation) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000). 2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with per-block-checkpoint) 1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
if(BERKELEY_DB)
add_definitions("-DBERKELEY_DB")
endif()
add_definitions("-DBLOCKCHAIN_DB=${BLOCKCHAIN_DB}")
find_package(Libunwind)
if(LIBUNWIND_FOUND)
message(STATUS "Using libunwind to provide stack traces")
add_definitions("-DHAVE_LIBUNWIND")
else()
message(STATUS "Stack traces disabled")
set(LIBUNWIND_LIBRARIES "")
endif()
2014-06-11 17:15:23 +00:00
if (UNIX AND NOT APPLE)
# Note that at the time of this writing the -Wstrict-prototypes flag added below will make this fail
set(THREADS_PREFER_PTHREAD_FLAG ON)
find_package(Threads)
2014-06-11 17:15:23 +00:00
endif()
add_subdirectory(external)
# Final setup for miniupnpc
if(UPNP_STATIC)
add_definitions("-DUPNP_STATIC")
else()
add_definitions("-DUPNP_DYNAMIC")
include_directories(${UPNP_INCLUDE})
endif()
# Final setup for libunbound
2014-09-24 18:38:24 +00:00
include_directories(${UNBOUND_INCLUDE})
2014-10-21 22:39:15 +00:00
link_directories(${UNBOUND_LIBRARY_DIRS})
# Final setup for rapidjson
include_directories(external/rapidjson)
# Final setup for liblmdb
include_directories(${LMDB_INCLUDE})
# Final setup for Berkeley DB
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY) Bockchain: 1. Optim: Multi-thread long-hash computation when encountering groups of blocks. 2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible. 3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible. 4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks. 5. Optim: Multi-thread signature computation whenever possible. 6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD) 7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???). 8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads). Berkeley-DB: 1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc). 2. Fix: Unable to pop blocks on reorganize due to transaction errors. 3. Patch: Large number of transaction aborts when running multi-threaded bulk queries. 4. Patch: Insufficient locks error when running full sync. 5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation. 6. Optim: Add bulk queries to get output global indices. 7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 9. Optim: Added thread-safe buffers used when multi-threading bulk queries. 10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details) 11. Mod: Added checkpoint thread and auto-remove-logs option. 12. *Now usable on 32-bit systems like RPI2. LMDB: 1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect) 2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details) 5. Mod: Auto resize to +1GB instead of multiplier x1.5 ETC: 1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete. 2. Fix: 32-bit saturation bug when computing next difficulty on large blocks. [PENDING ISSUES] 1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization. This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD. 2. Berkeley db, possible bug "unable to allocate memory". TBD. [NEW OPTIONS] (*Currently all enabled for testing purposes) 1. --fast-block-sync arg=[0:1] (default: 1) a. 0 = Compute long hash per block (may take a while depending on CPU) b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence) 2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000) a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions. b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache. Fast - Write meta-data but defer data flush. Fastest - Defer meta-data and data flush. Sync - Flush data after nblocks_per_sync and wait. Async - Flush data after nblocks_per_sync but do not wait for the operation to finish. 3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower) Max number of threads to use when computing long-hash in groups. 4. --show-time-stats arg=[0:1] (default: 1) Show benchmark related time stats. 5. --db-auto-remove-logs arg=[0:1] (default: 1) For berkeley-db only. Auto remove logs if enabled. **Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version. At the moment, you need a full resync to use this optimized version. [PERFORMANCE COMPARISON] **Some figures are approximations only. Using a baseline machine of an i7-2600K+SSD+(with full pow computation): 1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain. 2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain. 3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain. Averate procesing times (with full pow computation): lmdb-optimized: 1. tx_ave = 2.5 ms / tx 2. block_ave = 5.87 ms / block memory-official-repo: 1. tx_ave = 8.85 ms / tx 2. block_ave = 19.68 ms / block lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e) 1. tx_ave = 47.8 ms / tx 2. block_ave = 64.2 ms / block **Note: The following data denotes processing times only (does not include p2p download time) lmdb-optimized processing times (with full pow computation): 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000). 2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000). 3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000). lmdb-optimized processing times (with per-block-checkpoint) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with full pow computation) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000). 2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with per-block-checkpoint) 1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
if (BERKELEY_DB)
include_directories(${BDB_INCLUDE})
endif()
# Final setup for libunwind
include_directories(${LIBUNWIND_INCLUDE})
link_directories(${LIBUNWIND_LIBRARY_DIRS})
2014-03-03 22:07:58 +00:00
if(MSVC)
add_definitions("/bigobj /MP /W3 /GS- /D_CRT_SECURE_NO_WARNINGS /wd4996 /wd4345 /D_WIN32_WINNT=0x0600 /DWIN32_LEAN_AND_MEAN /DGTEST_HAS_TR1_TUPLE=0 /FIinline_c.h /D__SSE4_1__")
# set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} /Dinline=__inline")
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} /STACK:10485760")
if(STATIC)
foreach(VAR CMAKE_C_FLAGS_DEBUG CMAKE_CXX_FLAGS_DEBUG CMAKE_C_FLAGS_RELEASE CMAKE_CXX_FLAGS_RELEASE)
string(REPLACE "/MD" "/MT" ${VAR} "${${VAR}}")
endforeach()
endif()
include_directories(SYSTEM src/platform/msc)
else()
set(ARCH native CACHE STRING "CPU to build for: -march value or default")
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY) Bockchain: 1. Optim: Multi-thread long-hash computation when encountering groups of blocks. 2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible. 3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible. 4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks. 5. Optim: Multi-thread signature computation whenever possible. 6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD) 7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???). 8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads). Berkeley-DB: 1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc). 2. Fix: Unable to pop blocks on reorganize due to transaction errors. 3. Patch: Large number of transaction aborts when running multi-threaded bulk queries. 4. Patch: Insufficient locks error when running full sync. 5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation. 6. Optim: Add bulk queries to get output global indices. 7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 9. Optim: Added thread-safe buffers used when multi-threading bulk queries. 10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details) 11. Mod: Added checkpoint thread and auto-remove-logs option. 12. *Now usable on 32-bit systems like RPI2. LMDB: 1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect) 2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details) 5. Mod: Auto resize to +1GB instead of multiplier x1.5 ETC: 1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete. 2. Fix: 32-bit saturation bug when computing next difficulty on large blocks. [PENDING ISSUES] 1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization. This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD. 2. Berkeley db, possible bug "unable to allocate memory". TBD. [NEW OPTIONS] (*Currently all enabled for testing purposes) 1. --fast-block-sync arg=[0:1] (default: 1) a. 0 = Compute long hash per block (may take a while depending on CPU) b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence) 2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000) a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions. b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache. Fast - Write meta-data but defer data flush. Fastest - Defer meta-data and data flush. Sync - Flush data after nblocks_per_sync and wait. Async - Flush data after nblocks_per_sync but do not wait for the operation to finish. 3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower) Max number of threads to use when computing long-hash in groups. 4. --show-time-stats arg=[0:1] (default: 1) Show benchmark related time stats. 5. --db-auto-remove-logs arg=[0:1] (default: 1) For berkeley-db only. Auto remove logs if enabled. **Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version. At the moment, you need a full resync to use this optimized version. [PERFORMANCE COMPARISON] **Some figures are approximations only. Using a baseline machine of an i7-2600K+SSD+(with full pow computation): 1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain. 2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain. 3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain. Averate procesing times (with full pow computation): lmdb-optimized: 1. tx_ave = 2.5 ms / tx 2. block_ave = 5.87 ms / block memory-official-repo: 1. tx_ave = 8.85 ms / tx 2. block_ave = 19.68 ms / block lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e) 1. tx_ave = 47.8 ms / tx 2. block_ave = 64.2 ms / block **Note: The following data denotes processing times only (does not include p2p download time) lmdb-optimized processing times (with full pow computation): 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000). 2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000). 3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000). lmdb-optimized processing times (with per-block-checkpoint) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with full pow computation) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000). 2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with per-block-checkpoint) 1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
# -march=armv7-a conflicts with -mcpu=cortex-a7
2016-01-07 02:55:13 +00:00
if(ARCH STREQUAL "default" OR ARM7 OR ARM6)
2014-03-03 22:07:58 +00:00
set(ARCH_FLAG "")
else()
if(ARCH STREQUAL "x86_64")
set(ARCH_FLAG "-march=x86-64")
else()
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY) Bockchain: 1. Optim: Multi-thread long-hash computation when encountering groups of blocks. 2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible. 3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible. 4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks. 5. Optim: Multi-thread signature computation whenever possible. 6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD) 7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???). 8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads). Berkeley-DB: 1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc). 2. Fix: Unable to pop blocks on reorganize due to transaction errors. 3. Patch: Large number of transaction aborts when running multi-threaded bulk queries. 4. Patch: Insufficient locks error when running full sync. 5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation. 6. Optim: Add bulk queries to get output global indices. 7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 9. Optim: Added thread-safe buffers used when multi-threading bulk queries. 10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details) 11. Mod: Added checkpoint thread and auto-remove-logs option. 12. *Now usable on 32-bit systems like RPI2. LMDB: 1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect) 2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details) 5. Mod: Auto resize to +1GB instead of multiplier x1.5 ETC: 1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete. 2. Fix: 32-bit saturation bug when computing next difficulty on large blocks. [PENDING ISSUES] 1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization. This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD. 2. Berkeley db, possible bug "unable to allocate memory". TBD. [NEW OPTIONS] (*Currently all enabled for testing purposes) 1. --fast-block-sync arg=[0:1] (default: 1) a. 0 = Compute long hash per block (may take a while depending on CPU) b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence) 2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000) a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions. b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache. Fast - Write meta-data but defer data flush. Fastest - Defer meta-data and data flush. Sync - Flush data after nblocks_per_sync and wait. Async - Flush data after nblocks_per_sync but do not wait for the operation to finish. 3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower) Max number of threads to use when computing long-hash in groups. 4. --show-time-stats arg=[0:1] (default: 1) Show benchmark related time stats. 5. --db-auto-remove-logs arg=[0:1] (default: 1) For berkeley-db only. Auto remove logs if enabled. **Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version. At the moment, you need a full resync to use this optimized version. [PERFORMANCE COMPARISON] **Some figures are approximations only. Using a baseline machine of an i7-2600K+SSD+(with full pow computation): 1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain. 2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain. 3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain. Averate procesing times (with full pow computation): lmdb-optimized: 1. tx_ave = 2.5 ms / tx 2. block_ave = 5.87 ms / block memory-official-repo: 1. tx_ave = 8.85 ms / tx 2. block_ave = 19.68 ms / block lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e) 1. tx_ave = 47.8 ms / tx 2. block_ave = 64.2 ms / block **Note: The following data denotes processing times only (does not include p2p download time) lmdb-optimized processing times (with full pow computation): 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000). 2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000). 3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000). lmdb-optimized processing times (with per-block-checkpoint) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with full pow computation) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000). 2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with per-block-checkpoint) 1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
set(ARCH_FLAG "-march=${ARCH}")
endif()
2014-03-03 22:07:58 +00:00
endif()
set(WARNINGS "-Wall -Wextra -Wpointer-arith -Wundef -Wvla -Wwrite-strings -Wno-error=extra -Wno-error=deprecated-declarations -Wno-error=sign-compare -Wno-error=strict-aliasing -Wno-error=type-limits -Wno-unused-parameter -Wno-error=unused-variable -Wno-error=undef -Wno-error=uninitialized")
if(CMAKE_C_COMPILER_ID STREQUAL "Clang")
set(WARNINGS "${WARNINGS} -Wno-deprecated-register")
endif()
if(NOT MINGW)
2015-04-07 21:56:18 +00:00
set(WARNINGS "${WARNINGS} -Werror") # to allow pedantic but not stop compilation
endif()
2014-03-03 22:07:58 +00:00
if(CMAKE_C_COMPILER_ID STREQUAL "Clang")
set(WARNINGS "${WARNINGS} -Wno-error=mismatched-tags -Wno-error=null-conversion -Wno-overloaded-shift-op-parentheses -Wno-error=shift-count-overflow -Wno-error=tautological-constant-out-of-range-compare -Wno-error=unused-private-field -Wno-error=unneeded-internal-declaration")
else()
set(WARNINGS "${WARNINGS} -Wlogical-op -Wno-error=maybe-uninitialized")
endif()
if(MINGW)
set(WARNINGS "${WARNINGS} -Wno-error=unused-value -Wno-error=unused-but-set-variable")
set(MINGW_FLAG "${MINGW_FLAG} -DWIN32_LEAN_AND_MEAN")
2014-08-06 16:43:01 +00:00
set(Boost_THREADAPI win32)
2014-03-03 22:07:58 +00:00
include_directories(SYSTEM src/platform/mingw)
# mingw doesn't support LTO (multiple definition errors at link time)
set(USE_LTO_DEFAULT false)
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,--stack,10485760")
if(NOT BUILD_64)
add_definitions(-DWINVER=0x0501 -D_WIN32_WINNT=0x0501)
endif()
2014-03-03 22:07:58 +00:00
endif()
set(C_WARNINGS "-Waggregate-return -Wnested-externs -Wold-style-definition -Wstrict-prototypes")
set(CXX_WARNINGS "-Wno-reorder -Wno-missing-field-initializers")
2015-05-31 13:39:56 +00:00
try_compile(STATIC_ASSERT_RES "${CMAKE_CURRENT_BINARY_DIR}/static-assert" "${CMAKE_CURRENT_SOURCE_DIR}/cmake/test-static-assert.c" COMPILE_DEFINITIONS "-std=c11")
2014-03-03 22:07:58 +00:00
if(STATIC_ASSERT_RES)
set(STATIC_ASSERT_FLAG "")
else()
set(STATIC_ASSERT_FLAG "-Dstatic_assert=_Static_assert")
endif()
2015-01-26 21:19:53 +00:00
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -std=c11 -D_GNU_SOURCE ${MINGW_FLAG} ${STATIC_ASSERT_FLAG} ${WARNINGS} ${C_WARNINGS} ${ARCH_FLAG}")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11 -D_GNU_SOURCE ${MINGW_FLAG} ${WARNINGS} ${CXX_WARNINGS} ${ARCH_FLAG}")
2015-01-26 21:19:53 +00:00
option(NO_AES "Explicitly disable AES support" ${NO_AES})
if(NOT NO_AES AND NOT (ARM6 OR ARM7))
message(STATUS "AES support enabled")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -maes")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -maes")
elseif(ARM7 OR ARM6)
message(STATUS "AES support disabled (not available on ARM)")
2015-01-26 21:19:53 +00:00
else()
message(STATUS "AES support disabled")
2015-01-26 21:19:53 +00:00
endif()
2015-04-06 12:00:09 +00:00
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY) Bockchain: 1. Optim: Multi-thread long-hash computation when encountering groups of blocks. 2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible. 3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible. 4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks. 5. Optim: Multi-thread signature computation whenever possible. 6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD) 7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???). 8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads). Berkeley-DB: 1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc). 2. Fix: Unable to pop blocks on reorganize due to transaction errors. 3. Patch: Large number of transaction aborts when running multi-threaded bulk queries. 4. Patch: Insufficient locks error when running full sync. 5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation. 6. Optim: Add bulk queries to get output global indices. 7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 9. Optim: Added thread-safe buffers used when multi-threading bulk queries. 10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details) 11. Mod: Added checkpoint thread and auto-remove-logs option. 12. *Now usable on 32-bit systems like RPI2. LMDB: 1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect) 2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details) 5. Mod: Auto resize to +1GB instead of multiplier x1.5 ETC: 1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete. 2. Fix: 32-bit saturation bug when computing next difficulty on large blocks. [PENDING ISSUES] 1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization. This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD. 2. Berkeley db, possible bug "unable to allocate memory". TBD. [NEW OPTIONS] (*Currently all enabled for testing purposes) 1. --fast-block-sync arg=[0:1] (default: 1) a. 0 = Compute long hash per block (may take a while depending on CPU) b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence) 2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000) a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions. b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache. Fast - Write meta-data but defer data flush. Fastest - Defer meta-data and data flush. Sync - Flush data after nblocks_per_sync and wait. Async - Flush data after nblocks_per_sync but do not wait for the operation to finish. 3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower) Max number of threads to use when computing long-hash in groups. 4. --show-time-stats arg=[0:1] (default: 1) Show benchmark related time stats. 5. --db-auto-remove-logs arg=[0:1] (default: 1) For berkeley-db only. Auto remove logs if enabled. **Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version. At the moment, you need a full resync to use this optimized version. [PERFORMANCE COMPARISON] **Some figures are approximations only. Using a baseline machine of an i7-2600K+SSD+(with full pow computation): 1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain. 2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain. 3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain. Averate procesing times (with full pow computation): lmdb-optimized: 1. tx_ave = 2.5 ms / tx 2. block_ave = 5.87 ms / block memory-official-repo: 1. tx_ave = 8.85 ms / tx 2. block_ave = 19.68 ms / block lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e) 1. tx_ave = 47.8 ms / tx 2. block_ave = 64.2 ms / block **Note: The following data denotes processing times only (does not include p2p download time) lmdb-optimized processing times (with full pow computation): 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000). 2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000). 3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000). lmdb-optimized processing times (with per-block-checkpoint) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with full pow computation) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000). 2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with per-block-checkpoint) 1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
if(ARM6)
message(STATUS "Setting ARM6 C and C++ flags")
2015-04-06 12:00:09 +00:00
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -mfpu=vfp -mfloat-abi=hard")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -mfpu=vfp -mfloat-abi=hard")
endif()
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY) Bockchain: 1. Optim: Multi-thread long-hash computation when encountering groups of blocks. 2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible. 3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible. 4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks. 5. Optim: Multi-thread signature computation whenever possible. 6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD) 7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???). 8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads). Berkeley-DB: 1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc). 2. Fix: Unable to pop blocks on reorganize due to transaction errors. 3. Patch: Large number of transaction aborts when running multi-threaded bulk queries. 4. Patch: Insufficient locks error when running full sync. 5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation. 6. Optim: Add bulk queries to get output global indices. 7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 9. Optim: Added thread-safe buffers used when multi-threading bulk queries. 10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details) 11. Mod: Added checkpoint thread and auto-remove-logs option. 12. *Now usable on 32-bit systems like RPI2. LMDB: 1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect) 2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details) 5. Mod: Auto resize to +1GB instead of multiplier x1.5 ETC: 1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete. 2. Fix: 32-bit saturation bug when computing next difficulty on large blocks. [PENDING ISSUES] 1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization. This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD. 2. Berkeley db, possible bug "unable to allocate memory". TBD. [NEW OPTIONS] (*Currently all enabled for testing purposes) 1. --fast-block-sync arg=[0:1] (default: 1) a. 0 = Compute long hash per block (may take a while depending on CPU) b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence) 2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000) a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions. b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache. Fast - Write meta-data but defer data flush. Fastest - Defer meta-data and data flush. Sync - Flush data after nblocks_per_sync and wait. Async - Flush data after nblocks_per_sync but do not wait for the operation to finish. 3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower) Max number of threads to use when computing long-hash in groups. 4. --show-time-stats arg=[0:1] (default: 1) Show benchmark related time stats. 5. --db-auto-remove-logs arg=[0:1] (default: 1) For berkeley-db only. Auto remove logs if enabled. **Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version. At the moment, you need a full resync to use this optimized version. [PERFORMANCE COMPARISON] **Some figures are approximations only. Using a baseline machine of an i7-2600K+SSD+(with full pow computation): 1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain. 2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain. 3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain. Averate procesing times (with full pow computation): lmdb-optimized: 1. tx_ave = 2.5 ms / tx 2. block_ave = 5.87 ms / block memory-official-repo: 1. tx_ave = 8.85 ms / tx 2. block_ave = 19.68 ms / block lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e) 1. tx_ave = 47.8 ms / tx 2. block_ave = 64.2 ms / block **Note: The following data denotes processing times only (does not include p2p download time) lmdb-optimized processing times (with full pow computation): 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000). 2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000). 3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000). lmdb-optimized processing times (with per-block-checkpoint) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with full pow computation) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000). 2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with per-block-checkpoint) 1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
if(ARM7)
message(STATUS "Setting ARM7 C and C++ flags")
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -O2 -mfloat-abi=hard")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -O2 -mfloat-abi=hard")
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY) Bockchain: 1. Optim: Multi-thread long-hash computation when encountering groups of blocks. 2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible. 3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible. 4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks. 5. Optim: Multi-thread signature computation whenever possible. 6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD) 7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???). 8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads). Berkeley-DB: 1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc). 2. Fix: Unable to pop blocks on reorganize due to transaction errors. 3. Patch: Large number of transaction aborts when running multi-threaded bulk queries. 4. Patch: Insufficient locks error when running full sync. 5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation. 6. Optim: Add bulk queries to get output global indices. 7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 9. Optim: Added thread-safe buffers used when multi-threading bulk queries. 10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details) 11. Mod: Added checkpoint thread and auto-remove-logs option. 12. *Now usable on 32-bit systems like RPI2. LMDB: 1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect) 2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3) 3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key 4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details) 5. Mod: Auto resize to +1GB instead of multiplier x1.5 ETC: 1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete. 2. Fix: 32-bit saturation bug when computing next difficulty on large blocks. [PENDING ISSUES] 1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization. This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD. 2. Berkeley db, possible bug "unable to allocate memory". TBD. [NEW OPTIONS] (*Currently all enabled for testing purposes) 1. --fast-block-sync arg=[0:1] (default: 1) a. 0 = Compute long hash per block (may take a while depending on CPU) b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence) 2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000) a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions. b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache. Fast - Write meta-data but defer data flush. Fastest - Defer meta-data and data flush. Sync - Flush data after nblocks_per_sync and wait. Async - Flush data after nblocks_per_sync but do not wait for the operation to finish. 3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower) Max number of threads to use when computing long-hash in groups. 4. --show-time-stats arg=[0:1] (default: 1) Show benchmark related time stats. 5. --db-auto-remove-logs arg=[0:1] (default: 1) For berkeley-db only. Auto remove logs if enabled. **Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version. At the moment, you need a full resync to use this optimized version. [PERFORMANCE COMPARISON] **Some figures are approximations only. Using a baseline machine of an i7-2600K+SSD+(with full pow computation): 1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain. 2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain. 3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain. Averate procesing times (with full pow computation): lmdb-optimized: 1. tx_ave = 2.5 ms / tx 2. block_ave = 5.87 ms / block memory-official-repo: 1. tx_ave = 8.85 ms / tx 2. block_ave = 19.68 ms / block lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e) 1. tx_ave = 47.8 ms / tx 2. block_ave = 64.2 ms / block **Note: The following data denotes processing times only (does not include p2p download time) lmdb-optimized processing times (with full pow computation): 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000). 2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000). 3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000). lmdb-optimized processing times (with per-block-checkpoint) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with full pow computation) 1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000). 2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000). berkeley-db optimized processing times (with per-block-checkpoint) 1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
endif()
2014-04-30 20:50:06 +00:00
if(APPLE)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -DGTEST_HAS_TR1_TUPLE=0")
endif()
2014-03-03 22:07:58 +00:00
if(CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT (CMAKE_C_COMPILER_VERSION VERSION_LESS 4.8))
set(DEBUG_FLAGS "-g3 -Og")
else()
set(DEBUG_FLAGS "-g3 -O0")
endif()
if(NOT DEFINED USE_LTO_DEFAULT)
set(USE_LTO_DEFAULT true)
endif()
set(USE_LTO ${USE_LTO_DEFAULT} CACHE BOOL "Use Link-Time Optimization (Release mode only)")
2014-09-15 20:47:26 +00:00
if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
2015-05-26 09:07:58 +00:00
# There is a clang bug that does not allow to compile code that uses AES-NI intrinsics if -flto is enabled, so explicitly disable
set(USE_LTO false)
2015-05-26 09:07:58 +00:00
# explicitly define stdlib for older versions of clang
if(CMAKE_C_COMPILER_VERSION VERSION_LESS 3.7)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -stdlib=libc++")
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -stdlib=libc++")
endif()
2014-09-15 20:47:26 +00:00
endif()
2015-05-26 09:07:58 +00:00
if(USE_LTO)
2014-05-22 11:00:48 +00:00
set(RELEASE_FLAGS "${RELEASE_FLAGS} -flto")
if(STATIC)
set(RELEASE_FLAGS "${RELEASE_FLAGS} -ffat-lto-objects")
endif()
# Since gcc 4.9 the LTO format is non-standard (slim), so we need the gcc-specific ar and ranlib binaries
if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU" AND NOT (CMAKE_CXX_COMPILER_VERSION VERSION_LESS 4.9.0) AND NOT OPENBSD)
set(CMAKE_AR "gcc-ar")
set(CMAKE_RANLIB "gcc-ranlib")
endif()
2014-05-22 11:00:48 +00:00
endif()
2014-03-03 22:07:58 +00:00
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} ${DEBUG_FLAGS}")
set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} ${DEBUG_FLAGS}")
set(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} ${RELEASE_FLAGS}")
set(CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} ${RELEASE_FLAGS}")
2016-01-21 18:18:26 +00:00
if(STATIC AND NOT APPLE AND NOT FREEBSD AND NOT OPENBSD)
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -static-libgcc -static-libstdc++")
set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -Wl,--wrap=__cxa_throw")
2014-03-03 22:07:58 +00:00
endif()
endif()
if (${BOOST_IGNORE_SYSTEM_PATHS} STREQUAL "ON")
set(Boost_NO_SYSTEM_PATHS TRUE)
2014-09-22 10:30:53 +00:00
endif()
set(OLD_LIB_SUFFIXES ${CMAKE_FIND_LIBRARY_SUFFIXES})
2014-03-03 22:07:58 +00:00
if(STATIC)
if(MINGW)
set(CMAKE_FIND_LIBRARY_SUFFIXES .a)
endif()
2014-03-03 22:07:58 +00:00
set(Boost_USE_STATIC_LIBS ON)
set(Boost_USE_STATIC_RUNTIME ON)
endif()
find_package(Boost 1.53 QUIET REQUIRED COMPONENTS system filesystem thread date_time chrono regex serialization program_options)
set(CMAKE_FIND_LIBRARY_SUFFIXES ${OLD_LIB_SUFFIXES})
if(NOT Boost_FOUND)
die("Could not find Boost libraries, please make sure you have installed Boost or libboost-all-dev (1.53 or 1.55+) or the equivalent")
endif()
if((Boost_MAJOR_VERSION EQUAL 1) AND (Boost_MINOR_VERSION EQUAL 54))
die("Boost version 1.54 is unsupported due to a bug (see: http://goo.gl/RrCFmA), please install Boost 1.53 or 1.55 and above")
2014-03-03 22:07:58 +00:00
endif()
2014-03-03 22:07:58 +00:00
include_directories(SYSTEM ${Boost_INCLUDE_DIRS})
if(MINGW)
set(EXTRA_LIBRARIES mswsock;ws2_32;iphlpapi)
2016-01-21 18:18:26 +00:00
elseif(APPLE OR FREEBSD OR OPENBSD)
set(EXTRA_LIBRARIES "")
2014-04-30 20:50:06 +00:00
elseif(NOT MSVC)
find_library(RT rt)
set(EXTRA_LIBRARIES ${RT})
2014-03-03 22:07:58 +00:00
endif()
if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU" AND NOT MINGW)
find_library(DL dl)
set(EXTRA_LIBRARIES ${DL})
endif()
include(version.cmake)
2014-03-03 22:07:58 +00:00
add_subdirectory(contrib)
2014-03-03 22:07:58 +00:00
add_subdirectory(src)
option(BUILD_TESTS "Build tests." OFF)
if(BUILD_TESTS)
add_subdirectory(tests)
2015-01-02 16:52:46 +00:00
endif()
if(BUILD_DOCUMENTATION)
set(DOC_GRAPHS "YES" CACHE STRING "Create dependency graphs (needs graphviz)")
set(DOC_FULLGRAPHS "NO" CACHE STRING "Create call/callee graphs (large)")
find_program(DOT_PATH dot)
if (DOT_PATH STREQUAL "DOT_PATH-NOTFOUND")
message("Doxygen: graphviz not found - graphs disabled")
set(DOC_GRAPHS "NO")
endif()
find_package(Doxygen)
if(DOXYGEN_FOUND)
configure_file("cmake/Doxyfile.in" "Doxyfile" @ONLY)
configure_file("cmake/Doxygen.extra.css.in" "Doxygen.extra.css" @ONLY)
add_custom_target(doc
${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile
WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
COMMENT "Generating API documentation with Doxygen.." VERBATIM)
endif()
endif()