wownero/contrib/epee/include/hex.h

100 lines
3.8 KiB
C
Raw Normal View History

2022-03-01 11:16:17 +00:00
// Copyright (c) 2017-2022, The Monero Project
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification, are
// permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this list of
// conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice, this list
// of conditions and the following disclaimer in the documentation and/or other
// materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its contributors may be
// used to endorse or promote products derived from this software without specific
// prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#pragma once
#include <array>
#include <cstdint>
#include <iosfwd>
#include <string>
epee: add SSL support RPC connections now have optional tranparent SSL. An optional private key and certificate file can be passed, using the --{rpc,daemon}-ssl-private-key and --{rpc,daemon}-ssl-certificate options. Those have as argument a path to a PEM format private private key and certificate, respectively. If not given, a temporary self signed certificate will be used. SSL can be enabled or disabled using --{rpc}-ssl, which accepts autodetect (default), disabled or enabled. Access can be restricted to particular certificates using the --rpc-ssl-allowed-certificates, which takes a list of paths to PEM encoded certificates. This can allow a wallet to connect to only the daemon they think they're connected to, by forcing SSL and listing the paths to the known good certificates. To generate long term certificates: openssl genrsa -out /tmp/KEY 4096 openssl req -new -key /tmp/KEY -out /tmp/REQ openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT /tmp/KEY is the private key, and /tmp/CERT is the certificate, both in PEM format. /tmp/REQ can be removed. Adjust the last command to set expiration date, etc, as needed. It doesn't make a whole lot of sense for monero anyway, since most servers will run with one time temporary self signed certificates anyway. SSL support is transparent, so all communication is done on the existing ports, with SSL autodetection. This means you can start using an SSL daemon now, but you should not enforce SSL yet or nothing will talk to you.
2018-06-14 22:44:48 +00:00
#include <boost/utility/string_ref.hpp>
#include "wipeable_string.h"
#include "span.h"
namespace epee
{
struct to_hex
{
//! \return A std::string containing hex of `src`.
static std::string string(const span<const std::uint8_t> src);
//! \return A epee::wipeable_string containing hex of `src`.
static epee::wipeable_string wipeable_string(const span<const std::uint8_t> src);
template<typename T> static epee::wipeable_string wipeable_string(const T &pod) { return wipeable_string(span<const uint8_t>((const uint8_t*)&pod, sizeof(pod))); }
//! \return An array containing hex of `src`.
template<std::size_t N>
static std::array<char, N * 2> array(const std::array<std::uint8_t, N>& src) noexcept
{
std::array<char, N * 2> out;
static_assert(N <= 128, "keep the stack size down");
buffer_unchecked(out.data(), {src.data(), src.size()});
return out;
}
//! \return An array containing hex of `src`.
template<typename T>
static std::array<char, sizeof(T) * 2> array(const T& src) noexcept
{
std::array<char, sizeof(T) * 2> out;
static_assert(sizeof(T) <= 128, "keep the stack size down");
buffer_unchecked(out.data(), as_byte_span(src));
return out;
}
//! Append `src` as hex to `out`.
static void buffer(std::ostream& out, const span<const std::uint8_t> src);
//! Append `< + src + >` as hex to `out`.
static void formatted(std::ostream& out, const span<const std::uint8_t> src);
private:
template<typename T> T static convert(const span<const std::uint8_t> src);
//! Write `src` bytes as hex to `out`. `out` must be twice the length
static void buffer_unchecked(char* out, const span<const std::uint8_t> src) noexcept;
};
epee: add SSL support RPC connections now have optional tranparent SSL. An optional private key and certificate file can be passed, using the --{rpc,daemon}-ssl-private-key and --{rpc,daemon}-ssl-certificate options. Those have as argument a path to a PEM format private private key and certificate, respectively. If not given, a temporary self signed certificate will be used. SSL can be enabled or disabled using --{rpc}-ssl, which accepts autodetect (default), disabled or enabled. Access can be restricted to particular certificates using the --rpc-ssl-allowed-certificates, which takes a list of paths to PEM encoded certificates. This can allow a wallet to connect to only the daemon they think they're connected to, by forcing SSL and listing the paths to the known good certificates. To generate long term certificates: openssl genrsa -out /tmp/KEY 4096 openssl req -new -key /tmp/KEY -out /tmp/REQ openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT /tmp/KEY is the private key, and /tmp/CERT is the certificate, both in PEM format. /tmp/REQ can be removed. Adjust the last command to set expiration date, etc, as needed. It doesn't make a whole lot of sense for monero anyway, since most servers will run with one time temporary self signed certificates anyway. SSL support is transparent, so all communication is done on the existing ports, with SSL autodetection. This means you can start using an SSL daemon now, but you should not enforce SSL yet or nothing will talk to you.
2018-06-14 22:44:48 +00:00
//! Convert hex in UTF8 encoding to binary
epee: add SSL support RPC connections now have optional tranparent SSL. An optional private key and certificate file can be passed, using the --{rpc,daemon}-ssl-private-key and --{rpc,daemon}-ssl-certificate options. Those have as argument a path to a PEM format private private key and certificate, respectively. If not given, a temporary self signed certificate will be used. SSL can be enabled or disabled using --{rpc}-ssl, which accepts autodetect (default), disabled or enabled. Access can be restricted to particular certificates using the --rpc-ssl-allowed-certificates, which takes a list of paths to PEM encoded certificates. This can allow a wallet to connect to only the daemon they think they're connected to, by forcing SSL and listing the paths to the known good certificates. To generate long term certificates: openssl genrsa -out /tmp/KEY 4096 openssl req -new -key /tmp/KEY -out /tmp/REQ openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT /tmp/KEY is the private key, and /tmp/CERT is the certificate, both in PEM format. /tmp/REQ can be removed. Adjust the last command to set expiration date, etc, as needed. It doesn't make a whole lot of sense for monero anyway, since most servers will run with one time temporary self signed certificates anyway. SSL support is transparent, so all communication is done on the existing ports, with SSL autodetection. This means you can start using an SSL daemon now, but you should not enforce SSL yet or nothing will talk to you.
2018-06-14 22:44:48 +00:00
struct from_hex
{
static bool to_string(std::string& out, boost::string_ref src);
static bool to_buffer(span<std::uint8_t> out, boost::string_ref src) noexcept;
private:
static bool to_buffer_unchecked(std::uint8_t* out, boost::string_ref src) noexcept;
};
//! Convert hex in current C locale encoding to binary
struct from_hex_locale
{
static std::vector<uint8_t> to_vector(boost::string_ref src);
epee: add SSL support RPC connections now have optional tranparent SSL. An optional private key and certificate file can be passed, using the --{rpc,daemon}-ssl-private-key and --{rpc,daemon}-ssl-certificate options. Those have as argument a path to a PEM format private private key and certificate, respectively. If not given, a temporary self signed certificate will be used. SSL can be enabled or disabled using --{rpc}-ssl, which accepts autodetect (default), disabled or enabled. Access can be restricted to particular certificates using the --rpc-ssl-allowed-certificates, which takes a list of paths to PEM encoded certificates. This can allow a wallet to connect to only the daemon they think they're connected to, by forcing SSL and listing the paths to the known good certificates. To generate long term certificates: openssl genrsa -out /tmp/KEY 4096 openssl req -new -key /tmp/KEY -out /tmp/REQ openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT /tmp/KEY is the private key, and /tmp/CERT is the certificate, both in PEM format. /tmp/REQ can be removed. Adjust the last command to set expiration date, etc, as needed. It doesn't make a whole lot of sense for monero anyway, since most servers will run with one time temporary self signed certificates anyway. SSL support is transparent, so all communication is done on the existing ports, with SSL autodetection. This means you can start using an SSL daemon now, but you should not enforce SSL yet or nothing will talk to you.
2018-06-14 22:44:48 +00:00
};
}