wownero/utils/python-rpc/framework/daemon.py

636 lines
20 KiB
Python
Raw Normal View History

2018-06-15 09:57:22 +00:00
# Copyright (c) 2018 The Monero Project
#
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without modification, are
# permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice, this list of
# conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright notice, this list
# of conditions and the following disclaimer in the documentation and/or other
# materials provided with the distribution.
#
# 3. Neither the name of the copyright holder nor the names of its contributors may be
# used to endorse or promote products derived from this software without specific
# prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
# THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
# THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
"""Daemon class to make rpc calls and store state."""
from .rpc import JSONRPC
class Daemon(object):
def __init__(self, protocol='http', host='127.0.0.1', port=0, idx=0, restricted_rpc = False):
base = 18480 if restricted_rpc else 18180
self.host = host
self.port = port
self.rpc = JSONRPC('{protocol}://{host}:{port}'.format(protocol=protocol, host=host, port=port if port else base+idx))
2018-06-15 09:57:22 +00:00
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def getblocktemplate(self, address, prev_block = "", client = ""):
2018-06-15 09:57:22 +00:00
getblocktemplate = {
'method': 'getblocktemplate',
'params': {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
2018-06-15 09:57:22 +00:00
'wallet_address': address,
'reserve_size' : 1,
'prev_block' : prev_block,
2018-06-15 09:57:22 +00:00
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(getblocktemplate)
get_block_template = getblocktemplate
2018-06-15 09:57:22 +00:00
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def send_raw_transaction(self, tx_as_hex, do_not_relay = False, do_sanity_checks = True, client = ""):
send_raw_transaction = {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
'tx_as_hex': tx_as_hex,
'do_not_relay': do_not_relay,
'do_sanity_checks': do_sanity_checks,
}
return self.rpc.send_request("/send_raw_transaction", send_raw_transaction)
sendrawtransaction = send_raw_transaction
2018-06-15 09:57:22 +00:00
def submitblock(self, block):
submitblock = {
'method': 'submitblock',
'params': [ block ],
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(submitblock)
submit_block = submitblock
2018-06-15 09:57:22 +00:00
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def getblock(self, hash = '', height = 0, fill_pow_hash = False, client = ""):
2018-06-15 09:57:22 +00:00
getblock = {
'method': 'getblock',
'params': {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
'hash': hash,
'height': height,
'fill_pow_hash': fill_pow_hash,
2018-06-15 09:57:22 +00:00
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(getblock)
get_block = getblock
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def getlastblockheader(self, client = ""):
getlastblockheader = {
'method': 'getlastblockheader',
'params': {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(getlastblockheader)
get_last_block_header = getlastblockheader
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def getblockheaderbyhash(self, hash = "", hashes = [], client = ""):
getblockheaderbyhash = {
'method': 'getblockheaderbyhash',
'params': {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
'hash': hash,
'hashes': hashes,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(getblockheaderbyhash)
get_block_header_by_hash = getblockheaderbyhash
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def getblockheaderbyheight(self, height, client = ""):
getblockheaderbyheight = {
'method': 'getblockheaderbyheight',
'params': {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
'height': height,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(getblockheaderbyheight)
get_block_header_by_height = getblockheaderbyheight
2018-06-15 09:57:22 +00:00
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def getblockheadersrange(self, start_height, end_height, fill_pow_hash = False, client = ""):
getblockheadersrange = {
'method': 'getblockheadersrange',
'params': {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
'start_height': start_height,
'end_height': end_height,
'fill_pow_hash': fill_pow_hash,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(getblockheadersrange)
get_block_headers_range = getblockheadersrange
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_connections(self, client = ""):
2018-06-15 09:57:22 +00:00
get_connections = {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
2018-06-15 09:57:22 +00:00
'method': 'get_connections',
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(get_connections)
2018-06-15 09:57:22 +00:00
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_info(self, client = ""):
2018-06-15 09:57:22 +00:00
get_info = {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'method': 'get_info',
'params': {
'client': client,
},
'jsonrpc': '2.0',
'id': '0'
2018-06-15 09:57:22 +00:00
}
return self.rpc.send_json_rpc_request(get_info)
getinfo = get_info
2018-06-15 09:57:22 +00:00
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def hard_fork_info(self, client = ""):
2018-06-15 09:57:22 +00:00
hard_fork_info = {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'method': 'hard_fork_info',
'params': {
'client': client,
},
'jsonrpc': '2.0',
'id': '0'
2018-06-15 09:57:22 +00:00
}
return self.rpc.send_json_rpc_request(hard_fork_info)
2018-06-15 09:57:22 +00:00
def generateblocks(self, address, blocks=1, prev_block = "", starting_nonce = 0):
2018-06-15 09:57:22 +00:00
generateblocks = {
'method': 'generateblocks',
'params': {
'amount_of_blocks' : blocks,
'reserve_size' : 20,
'wallet_address': address,
'prev_block': prev_block,
'starting_nonce': starting_nonce,
2018-06-15 09:57:22 +00:00
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(generateblocks)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_height(self, client = ""):
get_height = {
'method': 'get_height',
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_request("/get_height", get_height)
getheight = get_height
def pop_blocks(self, nblocks = 1):
pop_blocks = {
'nblocks' : nblocks,
}
return self.rpc.send_request("/pop_blocks", pop_blocks)
def start_mining(self, miner_address, threads_count = 0, do_background_mining = False, ignore_battery = False):
start_mining = {
'miner_address' : miner_address,
'threads_count' : threads_count,
'do_background_mining' : do_background_mining,
'ignore_battery' : ignore_battery,
}
return self.rpc.send_request('/start_mining', start_mining)
def stop_mining(self):
stop_mining = {
}
return self.rpc.send_request('/stop_mining', stop_mining)
def mining_status(self):
mining_status = {
}
return self.rpc.send_request('/mining_status', mining_status)
2019-03-17 14:15:41 +00:00
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_transaction_pool(self, client = ""):
2019-03-17 14:15:41 +00:00
get_transaction_pool = {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
2019-03-17 14:15:41 +00:00
}
return self.rpc.send_request('/get_transaction_pool', get_transaction_pool)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_transaction_pool_hashes(self, client = ""):
2019-03-17 14:15:41 +00:00
get_transaction_pool_hashes = {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
2019-03-17 14:15:41 +00:00
}
return self.rpc.send_request('/get_transaction_pool_hashes', get_transaction_pool_hashes)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_transaction_pool_stats(self, client = ""):
get_transaction_pool_stats = {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
}
return self.rpc.send_request('/get_transaction_pool_stats', get_transaction_pool_stats)
2019-03-17 14:15:41 +00:00
def flush_txpool(self, txids = []):
flush_txpool = {
'method': 'flush_txpool',
'params': {
'txids': txids
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(flush_txpool)
def get_version(self):
get_version = {
'method': 'get_version',
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(get_version)
2019-03-22 17:59:27 +00:00
def get_bans(self):
get_bans = {
'method': 'get_bans',
'params': {
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(get_bans)
def set_bans(self, bans = []):
set_bans = {
'method': 'set_bans',
'params': {
'bans': bans
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(set_bans)
2019-10-25 23:10:35 +00:00
def banned(self, address = ''):
banned = {
'method': 'banned',
'params': {
'address': address
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(banned)
def set_bootstrap_daemon(self, address, username = '', password = ''):
set_bootstrap_daemon = {
'address': address,
'username': username,
'password': password,
}
return self.rpc.send_request('/set_bootstrap_daemon', set_bootstrap_daemon)
def get_public_nodes(self, gray = False, white = True):
get_public_nodes = {
'gray': gray,
'white': white,
}
return self.rpc.send_request('/get_public_nodes', get_public_nodes)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_transactions(self, txs_hashes = [], decode_as_json = False, prune = False, split = False, client = ""):
get_transactions = {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
'txs_hashes': txs_hashes,
'decode_as_json': decode_as_json,
'prune': prune,
'split': split,
}
return self.rpc.send_request('/get_transactions', get_transactions)
gettransactions = get_transactions
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_outs(self, outputs = [], get_txid = False, client = ""):
get_outs = {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
'outputs': outputs,
'get_txid': get_txid,
}
return self.rpc.send_request('/get_outs', get_outs)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_coinbase_tx_sum(self, height, count, client = ""):
get_coinbase_tx_sum = {
'method': 'get_coinbase_tx_sum',
'params': {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
'height': height,
'count': count,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(get_coinbase_tx_sum)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_output_distribution(self, amounts = [], from_height = 0, to_height = 0, cumulative = False, binary = False, compress = False, client = ""):
get_output_distribution = {
'method': 'get_output_distribution',
'params': {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
'amounts': amounts,
'from_height': from_height,
'to_height': to_height,
'cumulative': cumulative,
'binary': binary,
'compress': compress,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(get_output_distribution)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_output_histogram(self, amounts = [], min_count = 0, max_count = 0, unlocked = False, recent_cutoff = 0, client = ""):
get_output_histogram = {
'method': 'get_output_histogram',
'params': {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
'amounts': amounts,
'min_count': min_count,
'max_count': max_count,
'unlocked': unlocked,
'recent_cutoff': recent_cutoff,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(get_output_histogram)
def set_log_level(self, level):
set_log_level = {
'level': level,
}
return self.rpc.send_request('/set_log_level', set_log_level)
def set_log_categories(self, categories = ''):
set_log_categories = {
'categories': categories,
}
return self.rpc.send_request('/set_log_categories', set_log_categories)
2019-03-25 15:41:32 +00:00
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_alt_blocks_hashes(self, client = ""):
2019-03-25 15:41:32 +00:00
get_alt_blocks_hashes = {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
2019-03-25 15:41:32 +00:00
}
return self.rpc.send_request('/get_alt_blocks_hashes', get_alt_blocks_hashes)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_alternate_chains(self, client = ""):
2019-03-25 15:41:32 +00:00
get_alternate_chains = {
'method': 'get_alternate_chains',
'params': {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
2019-03-25 15:41:32 +00:00
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(get_alternate_chains)
def get_fee_estimate(self, grace_blocks = 0):
get_fee_estimate = {
'method': 'get_fee_estimate',
'params': {
'grace_blocks': grace_blocks,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(get_fee_estimate)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def is_key_image_spent(self, key_images = [], client = ""):
is_key_image_spent = {
'key_images': key_images,
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
}
return self.rpc.send_request('/is_key_image_spent', is_key_image_spent)
2019-05-09 15:50:10 +00:00
def save_bc(self):
save_bc = {
}
return self.rpc.send_request('/save_bc', save_bc)
def get_peer_list(self):
get_peer_list = {
}
return self.rpc.send_request('/get_peer_list', get_peer_list)
def set_log_hash_rate(self, visible):
set_log_hash_rate = {
'visible': visible,
}
return self.rpc.send_request('/set_log_hash_rate', set_log_hash_rate)
def stop_daemon(self):
stop_daemon = {
}
return self.rpc.send_request('/stop_daemon', stop_daemon)
def get_net_stats(self):
get_net_stats = {
}
return self.rpc.send_request('/get_net_stats', get_net_stats)
def get_limit(self):
get_limit = {
}
return self.rpc.send_request('/get_limit', get_limit)
def set_limit(self, limit_down, limit_up):
set_limit = {
'limit_down': limit_down,
'limit_up': limit_up,
}
return self.rpc.send_request('/set_limit', set_limit)
def out_peers(self, out_peers):
out_peers = {
'out_peers': out_peers,
}
return self.rpc.send_request('/out_peers', out_peers)
def in_peers(self, in_peers):
in_peers = {
2020-06-17 14:34:16 +00:00
'in_peers': in_peers,
}
return self.rpc.send_request('/in_peers', in_peers)
def update(self, command, path = None):
update = {
'command': command,
'path': path,
}
return self.rpc.send_request('/update', update)
def get_block_count(self):
get_block_count = {
'method': 'get_block_count',
'params': {
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(get_block_count)
getblockcount = get_block_count
def get_block_hash(self, height):
get_block_hash = {
'method': 'get_block_hash',
'params': [height],
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(get_block_hash)
on_get_block_hash = get_block_hash
on_getblockhash = get_block_hash
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def relay_tx(self, txids = [], client = ""):
relay_tx = {
'method': 'relay_tx',
'params': {
'txids': txids,
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(relay_tx)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def sync_info(self, client = ""):
sync_info = {
'method': 'sync_info',
'params': {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(sync_info)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def get_txpool_backlog(self, client = ""):
get_txpool_backlog = {
'method': 'get_txpool_backlog',
'params': {
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
'client': client,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(get_txpool_backlog)
def prune_blockchain(self, check = False):
prune_blockchain = {
'method': 'prune_blockchain',
'params': {
'check': check,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(prune_blockchain)
def flush_cache(self, bad_txs = False):
flush_cache = {
'method': 'flush_cache',
'params': {
'bad_txs': bad_txs,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(flush_cache)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def sync_txpool(self):
sync_txpool = {
'method': 'sync_txpool',
'params': {
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(sync_txpool)
daemon, wallet: new pay for RPC use system Daemons intended for public use can be set up to require payment in the form of hashes in exchange for RPC service. This enables public daemons to receive payment for their work over a large number of calls. This system behaves similarly to a pool, so payment takes the form of valid blocks every so often, yielding a large one off payment, rather than constant micropayments. This system can also be used by third parties as a "paywall" layer, where users of a service can pay for use by mining Monero to the service provider's address. An example of this for web site access is Primo, a Monero mining based website "paywall": https://github.com/selene-kovri/primo This has some advantages: - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own - incentive to run your own node instead of using a third party's, thereby promoting decentralization - decentralized: payment is done between a client and server, with no third party needed - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance - no payment occurs on the blockchain, so there is no extra transactional load - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy) - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue - no large credit balance maintained on servers, so they have no incentive to exit scam - you can use any/many node(s), since there's little cost in switching servers - market based prices: competition between servers to lower costs - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others - increases network security - helps counteract mining pools' share of the network hash rate - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner And some disadvantages: - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine) - payment is "random", so a server might go a long time without a block before getting one - a public node's overall expected payment may be small Public nodes are expected to compete to find a suitable level for cost of service. The daemon can be set up this way to require payment for RPC services: monerod --rpc-payment-address 4xxxxxx \ --rpc-payment-credits 250 --rpc-payment-difficulty 1000 These values are an example only. The --rpc-payment-difficulty switch selects how hard each "share" should be, similar to a mining pool. The higher the difficulty, the fewer shares a client will find. The --rpc-payment-credits switch selects how many credits are awarded for each share a client finds. Considering both options, clients will be awarded credits/difficulty credits for every hash they calculate. For example, in the command line above, 0.25 credits per hash. A client mining at 100 H/s will therefore get an average of 25 credits per second. For reference, in the current implementation, a credit is enough to sync 20 blocks, so a 100 H/s client that's just starting to use Monero and uses this daemon will be able to sync 500 blocks per second. The wallet can be set to automatically mine if connected to a daemon which requires payment for RPC usage. It will try to keep a balance of 50000 credits, stopping mining when it's at this level, and starting again as credits are spent. With the example above, a new client will mine this much credits in about half an hour, and this target is enough to sync 500000 blocks (currently about a third of the monero blockchain). There are three new settings in the wallet: - credits-target: this is the amount of credits a wallet will try to reach before stopping mining. The default of 0 means 50000 credits. - auto-mine-for-rpc-payment-threshold: this controls the minimum credit rate which the wallet considers worth mining for. If the daemon credits less than this ratio, the wallet will consider mining to be not worth it. In the example above, the rate is 0.25 - persistent-rpc-client-id: if set, this allows the wallet to reuse a client id across runs. This means a public node can tell a wallet that's connecting is the same as one that connected previously, but allows a wallet to keep their credit balance from one run to the other. Since the wallet only mines to keep a small credit balance, this is not normally worth doing. However, someone may want to mine on a fast server, and use that credit balance on a low power device such as a phone. If left unset, a new client ID is generated at each wallet start, for privacy reasons. To mine and use a credit balance on two different devices, you can use the --rpc-client-secret-key switch. A wallet's client secret key can be found using the new rpc_payments command in the wallet. Note: anyone knowing your RPC client secret key is able to use your credit balance. The wallet has a few new commands too: - start_mining_for_rpc: start mining to acquire more credits, regardless of the auto mining settings - stop_mining_for_rpc: stop mining to acquire more credits - rpc_payments: display information about current credits with the currently selected daemon The node has an extra command: - rpc_payments: display information about clients and their balances The node will forget about any balance for clients which have been inactive for 6 months. Balances carry over on node restart.
2018-02-11 15:15:56 +00:00
def rpc_access_info(self, client):
rpc_access_info = {
'method': 'rpc_access_info',
'params': {
'client': client,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(rpc_access_info)
def rpc_access_submit_nonce(self, client, nonce, cookie):
rpc_access_submit_nonce = {
'method': 'rpc_access_submit_nonce',
'params': {
'client': client,
'nonce': nonce,
'cookie': cookie,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(rpc_access_submit_nonce)
def rpc_access_pay(self, client, paying_for, payment):
rpc_access_pay = {
'method': 'rpc_access_pay',
'params': {
'client': client,
'paying_for': paying_for,
'payment': payment,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(rpc_access_pay)
def rpc_access_tracking(self, clear = False):
rpc_access_tracking = {
'method': 'rpc_access_tracking',
'params': {
'clear': clear,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(rpc_access_tracking)
def rpc_access_data(self):
rpc_access_data = {
'method': 'rpc_access_data',
'params': {
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(rpc_access_data)
def rpc_access_account(self, client, delta_balance = 0):
rpc_access_account = {
'method': 'rpc_access_account',
'params': {
'client': client,
'delta_balance': delta_balance,
},
'jsonrpc': '2.0',
'id': '0'
}
return self.rpc.send_json_rpc_request(rpc_access_account)