wownero/contrib/epee/include/misc_log_ex.h

207 lines
7.7 KiB
C
Raw Normal View History

// Copyright (c) 2006-2013, Andrey N. Sabelnikov, www.sabelnikov.net
2014-03-03 22:07:58 +00:00
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
// * Neither the name of the Andrey N. Sabelnikov nor the
// names of its contributors may be used to endorse or promote products
// derived from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER BE LIABLE FOR ANY
// DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
// ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
2014-03-03 22:07:58 +00:00
#ifndef _MISC_LOG_EX_H_
#define _MISC_LOG_EX_H_
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
#include <string>
2014-03-03 22:07:58 +00:00
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
#include "easylogging++.h"
#undef MONERO_DEFAULT_LOG_CATEGORY
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
#define MONERO_DEFAULT_LOG_CATEGORY "default"
#define MAX_LOG_FILE_SIZE 104850000 // 100 MB - 7600 bytes
#define MAX_LOG_FILES 50
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
#define MCFATAL(cat,x) CLOG(FATAL,cat) << x
#define MCERROR(cat,x) CLOG(ERROR,cat) << x
#define MCWARNING(cat,x) CLOG(WARNING,cat) << x
#define MCINFO(cat,x) CLOG(INFO,cat) << x
#define MCDEBUG(cat,x) CLOG(DEBUG,cat) << x
#define MCTRACE(cat,x) CLOG(TRACE,cat) << x
#define MCLOG(level,cat,x) ELPP_WRITE_LOG(el::base::Writer, level, el::base::DispatchAction::NormalLog, cat) << x
#define MCLOG_FILE(level,cat,x) ELPP_WRITE_LOG(el::base::Writer, level, el::base::DispatchAction::FileOnlyLog, cat) << x
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
#define MCLOG_COLOR(level,cat,color,x) MCLOG(level,cat,"\033[1;" color "m" << x << "\033[0m")
#define MCLOG_RED(level,cat,x) MCLOG_COLOR(level,cat,"31",x)
#define MCLOG_GREEN(level,cat,x) MCLOG_COLOR(level,cat,"32",x)
#define MCLOG_YELLOW(level,cat,x) MCLOG_COLOR(level,cat,"33",x)
#define MCLOG_BLUE(level,cat,x) MCLOG_COLOR(level,cat,"34",x)
#define MCLOG_MAGENTA(level,cat,x) MCLOG_COLOR(level,cat,"35",x)
#define MCLOG_CYAN(level,cat,x) MCLOG_COLOR(level,cat,"36",x)
#define MLOG_RED(level,x) MCLOG_RED(level,MONERO_DEFAULT_LOG_CATEGORY,x)
#define MLOG_GREEN(level,x) MCLOG_GREEN(level,MONERO_DEFAULT_LOG_CATEGORY,x)
#define MLOG_YELLOW(level,x) MCLOG_YELLOW(level,MONERO_DEFAULT_LOG_CATEGORY,x)
#define MLOG_BLUE(level,x) MCLOG_BLUE(level,MONERO_DEFAULT_LOG_CATEGORY,x)
#define MLOG_MAGENTA(level,x) MCLOG_MAGENTA(level,MONERO_DEFAULT_LOG_CATEGORY,x)
#define MLOG_CYAN(level,x) MCLOG_CYAN(level,MONERO_DEFAULT_LOG_CATEGORY,x)
#define MFATAL(x) MCFATAL(MONERO_DEFAULT_LOG_CATEGORY,x)
#define MERROR(x) MCERROR(MONERO_DEFAULT_LOG_CATEGORY,x)
#define MWARNING(x) MCWARNING(MONERO_DEFAULT_LOG_CATEGORY,x)
#define MINFO(x) MCINFO(MONERO_DEFAULT_LOG_CATEGORY,x)
#define MDEBUG(x) MCDEBUG(MONERO_DEFAULT_LOG_CATEGORY,x)
#define MTRACE(x) MCTRACE(MONERO_DEFAULT_LOG_CATEGORY,x)
#define MLOG(level,x) MCLOG(level,MONERO_DEFAULT_LOG_CATEGORY,x)
#define MGINFO(x) MCINFO("global",x)
#define MGINFO_RED(x) MCLOG_RED(el::Level::Info, "global",x)
#define MGINFO_GREEN(x) MCLOG_GREEN(el::Level::Info, "global",x)
#define MGINFO_YELLOW(x) MCLOG_YELLOW(el::Level::Info, "global",x)
#define MGINFO_BLUE(x) MCLOG_BLUE(el::Level::Info, "global",x)
#define MGINFO_MAGENTA(x) MCLOG_MAGENTA(el::Level::Info, "global",x)
#define MGINFO_CYAN(x) MCLOG_CYAN(el::Level::Info, "global",x)
#define LOG_ERROR(x) MERROR(x)
#define LOG_PRINT_L0(x) MWARNING(x)
#define LOG_PRINT_L1(x) MINFO(x)
#define LOG_PRINT_L2(x) MDEBUG(x)
#define LOG_PRINT_L3(x) MTRACE(x)
#define LOG_PRINT_L4(x) MTRACE(x)
#define _dbg3(x) MTRACE(x)
#define _dbg2(x) MDEBUG(x)
#define _dbg1(x) MDEBUG(x)
#define _info(x) MINFO(x)
#define _note(x) MDEBUG(x)
#define _fact(x) MDEBUG(x)
#define _mark(x) MDEBUG(x)
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
#define _warn(x) MWARNING(x)
#define _erro(x) MERROR(x)
#define MLOG_SET_THREAD_NAME(x) el::Helpers::setThreadName(x)
2014-03-03 22:07:58 +00:00
#ifndef LOCAL_ASSERT
#include <assert.h>
#if (defined _MSC_VER)
#define LOCAL_ASSERT(expr) {if(epee::debug::get_set_enable_assert()){_ASSERTE(expr);}}
#else
#define LOCAL_ASSERT(expr)
#endif
#endif
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
std::string mlog_get_default_log_path(const char *default_filename);
void mlog_configure(const std::string &filename_base, bool console, const std::size_t max_log_file_size = MAX_LOG_FILE_SIZE, const std::size_t max_log_files = MAX_LOG_FILES);
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
void mlog_set_categories(const char *categories);
std::string mlog_get_categories();
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
void mlog_set_log_level(int level);
void mlog_set_log(const char *log);
2014-03-03 22:07:58 +00:00
namespace epee
{
namespace debug
{
inline bool get_set_enable_assert(bool set = false, bool v = false)
{
static bool e = true;
if(set)
e = v;
return e;
}
}
#define ENDL std::endl
#define TRY_ENTRY() try {
#define CATCH_ENTRY(location, return_val) } \
catch(const std::exception& ex) \
{ \
(void)(ex); \
LOG_ERROR("Exception at [" << location << "], what=" << ex.what()); \
return return_val; \
}\
catch(...)\
{\
LOG_ERROR("Exception at [" << location << "], generic exception \"...\"");\
return return_val; \
}
#define CATCH_ENTRY_L0(lacation, return_val) CATCH_ENTRY(lacation, return_val)
#define CATCH_ENTRY_L1(lacation, return_val) CATCH_ENTRY(lacation, return_val)
#define CATCH_ENTRY_L2(lacation, return_val) CATCH_ENTRY(lacation, return_val)
#define CATCH_ENTRY_L3(lacation, return_val) CATCH_ENTRY(lacation, return_val)
#define CATCH_ENTRY_L4(lacation, return_val) CATCH_ENTRY(lacation, return_val)
#define ASSERT_MES_AND_THROW(message) {LOG_ERROR(message); std::stringstream ss; ss << message; throw std::runtime_error(ss.str());}
#define CHECK_AND_ASSERT_THROW_MES(expr, message) do {if(!(expr)) ASSERT_MES_AND_THROW(message);} while(0)
2014-03-03 22:07:58 +00:00
#ifndef CHECK_AND_ASSERT
#define CHECK_AND_ASSERT(expr, fail_ret_val) do{if(!(expr)){LOCAL_ASSERT(expr); return fail_ret_val;};}while(0)
#endif
#ifndef CHECK_AND_ASSERT_MES
#define CHECK_AND_ASSERT_MES(expr, fail_ret_val, message) do{if(!(expr)) {LOG_ERROR(message); return fail_ret_val;};}while(0)
#endif
#ifndef CHECK_AND_NO_ASSERT_MES_L
#define CHECK_AND_NO_ASSERT_MES_L(expr, fail_ret_val, l, message) do{if(!(expr)) {LOG_PRINT_L##l(message); /*LOCAL_ASSERT(expr);*/ return fail_ret_val;};}while(0)
#endif
2014-03-03 22:07:58 +00:00
#ifndef CHECK_AND_NO_ASSERT_MES
#define CHECK_AND_NO_ASSERT_MES(expr, fail_ret_val, message) CHECK_AND_NO_ASSERT_MES_L(expr, fail_ret_val, 0, message)
#endif
#ifndef CHECK_AND_NO_ASSERT_MES_L1
#define CHECK_AND_NO_ASSERT_MES_L1(expr, fail_ret_val, message) CHECK_AND_NO_ASSERT_MES_L(expr, fail_ret_val, 1, message)
2014-03-03 22:07:58 +00:00
#endif
#ifndef CHECK_AND_ASSERT_MES_NO_RET
#define CHECK_AND_ASSERT_MES_NO_RET(expr, message) do{if(!(expr)) {LOG_ERROR(message); return;};}while(0)
#endif
#ifndef CHECK_AND_ASSERT_MES2
#define CHECK_AND_ASSERT_MES2(expr, message) do{if(!(expr)) {LOG_ERROR(message); };}while(0)
#endif
Change logging to easylogging++ This replaces the epee and data_loggers logging systems with a single one, and also adds filename:line and explicit severity levels. Categories may be defined, and logging severity set by category (or set of categories). epee style 0-4 log level maps to a sensible severity configuration. Log files now also rotate when reaching 100 MB. To select which logs to output, use the MONERO_LOGS environment variable, with a comma separated list of categories (globs are supported), with their requested severity level after a colon. If a log matches more than one such setting, the last one in the configuration string applies. A few examples: This one is (mostly) silent, only outputting fatal errors: MONERO_LOGS=*:FATAL This one is very verbose: MONERO_LOGS=*:TRACE This one is totally silent (logwise): MONERO_LOGS="" This one outputs all errors and warnings, except for the "verify" category, which prints just fatal errors (the verify category is used for logs about incoming transactions and blocks, and it is expected that some/many will fail to verify, hence we don't want the spam): MONERO_LOGS=*:WARNING,verify:FATAL Log levels are, in decreasing order of priority: FATAL, ERROR, WARNING, INFO, DEBUG, TRACE Subcategories may be added using prefixes and globs. This example will output net.p2p logs at the TRACE level, but all other net* logs only at INFO: MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE Logs which are intended for the user (which Monero was using a lot through epee, but really isn't a nice way to go things) should use the "global" category. There are a few helper macros for using this category, eg: MGINFO("this shows up by default") or MGINFO_RED("this is red"), to try to keep a similar look and feel for now. Existing epee log macros still exist, and map to the new log levels, but since they're used as a "user facing" UI element as much as a logging system, they often don't map well to log severities (ie, a log level 0 log may be an error, or may be something we want the user to see, such as an important info). In those cases, I tried to use the new macros. In other cases, I left the existing macros in. When modifying logs, it is probably best to switch to the new macros with explicit levels. The --log-level options and set_log commands now also accept category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
enum console_colors
{
console_color_default,
console_color_white,
console_color_red,
console_color_green,
console_color_blue,
console_color_cyan,
console_color_magenta,
console_color_yellow
};
bool is_stdout_a_tty();
void set_console_color(int color, bool bright);
void reset_console_color();
2014-03-03 22:07:58 +00:00
}
#endif //_MISC_LOG_EX_H_