d0s3t3ch/wownero
1
0
Fork 0
mirror of https://git.wownero.com/wownero/wownero.git synced 2024-08-15 01:03:23 +00:00
Code Issues Projects Releases Wiki Activity
wownero/src/device/device_ledger.hpp

315 lines
16 KiB
C++
Raw Normal View History

Update 2019 copyright
2019-03-05 21:05:34 +00:00
// Copyright (c) 2017-2019, The Monero Project
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification, are
// permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this list of
// conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice, this list
// of conditions and the following disclaimer in the documentation and/or other
// materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its contributors may be
// used to endorse or promote products derived from this software without specific
// prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
#pragma once
#include <cstddef>
#include <string>
#include "device.hpp"
Add get_tx_proof support, needed for new sanity check Enhance debug info
2019-03-21 16:22:43 +00:00
#include "log.hpp"
Replace USB-CCID (smartcard) by USB-HID Remove PCSC dependencies which is a bit hard (not user friendly) to install on linux and Mac Split Ledger logic and device IO
2018-08-01 07:24:53 +00:00
#include "device_io_hid.hpp"
Change mutex lock model to avoid dead lock and ensure locks are always released. Additional cosmetic fixes: move 'name' as protected remove unnecessary local var Fix debug log
2018-03-26 10:38:38 +00:00
#include <boost/thread/mutex.hpp>
#include <boost/thread/recursive_mutex.hpp>
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
namespace hw {
namespace ledger {
Add application version compatibility check.
2019-03-07 22:34:53 +00:00
/* Minimal supported version */
#define MINIMAL_APP_VERSION_MAJOR 1
#define MINIMAL_APP_VERSION_MINOR 3
#define MINIMAL_APP_VERSION_MICRO 1
#define VERSION(M,m,u) ((M)<<16|(m)<<8|(u))
#define VERSION_MAJOR(v) (((v)>>16)&0xFF)
#define VERSION_MINOR(v) (((v)>>8)&0xFF)
#define VERSION_MICRO(v) (((v)>>0)&0xFF)
#define MINIMAL_APP_VERSION VERSION(MINIMAL_APP_VERSION_MAJOR, MINIMAL_APP_VERSION_MINOR, MINIMAL_APP_VERSION_MICRO)
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
void register_all(std::map<std::string, std::unique_ptr<device>> &registry);
#ifdef WITH_DEVICE_LEDGER
device_ledger: include status code name in error message
2020-02-07 14:20:38 +00:00
// Origin: https://github.com/LedgerHQ/ledger-app-monero/blob/master/src/monero_types.h
#define SW_BYTES_REMAINING_00 0x6100
#define SW_WARNING_STATE_UNCHANGED 0x6200
#define SW_STATE_TERMINATED 0x6285
#define SW_MORE_DATA_AVAILABLE 0x6310
#define SW_WRONG_LENGTH 0x6700
#define SW_LOGICAL_CHANNEL_NOT_SUPPORTED 0x6881
#define SW_SECURE_MESSAGING_NOT_SUPPORTED 0x6882
#define SW_LAST_COMMAND_EXPECTED 0x6883
#define SW_COMMAND_CHAINING_NOT_SUPPORTED 0x6884
#define SW_SECURITY_LOAD_KEY 0x6900
#define SW_SECURITY_COMMITMENT_CONTROL 0x6911
#define SW_SECURITY_AMOUNT_CHAIN_CONTROL 0x6912
#define SW_SECURITY_COMMITMENT_CHAIN_CONTROL 0x6913
#define SW_SECURITY_OUTKEYS_CHAIN_CONTROL 0x6914
#define SW_SECURITY_MAXOUTPUT_REACHED 0x6915
#define SW_SECURITY_TRUSTED_INPUT 0x6916
#define SW_CLIENT_NOT_SUPPORTED 0x6930
#define SW_SECURITY_STATUS_NOT_SATISFIED 0x6982
#define SW_FILE_INVALID 0x6983
#define SW_PIN_BLOCKED 0x6983
#define SW_DATA_INVALID 0x6984
#define SW_CONDITIONS_NOT_SATISFIED 0x6985
#define SW_COMMAND_NOT_ALLOWED 0x6986
#define SW_APPLET_SELECT_FAILED 0x6999
#define SW_WRONG_DATA 0x6a80
#define SW_FUNC_NOT_SUPPORTED 0x6a81
#define SW_FILE_NOT_FOUND 0x6a82
#define SW_RECORD_NOT_FOUND 0x6a83
#define SW_FILE_FULL 0x6a84
#define SW_INCORRECT_P1P2 0x6a86
#define SW_REFERENCED_DATA_NOT_FOUND 0x6a88
#define SW_WRONG_P1P2 0x6b00
#define SW_CORRECT_LENGTH_00 0x6c00
#define SW_INS_NOT_SUPPORTED 0x6d00
#define SW_CLA_NOT_SUPPORTED 0x6e00
#define SW_UNKNOWN 0x6f00
#define SW_OK 0x9000
#define SW_ALGORITHM_UNSUPPORTED 0x9484
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
namespace {
bool apdu_verbose =true;
}
void set_apdu_verbose(bool verbose);
class ABPkeys {
public:
rct::key Aout;
rct::key Bout;
Ledger HW Bug fixes Fix the way the REAL mode is handle: Let create_transactions_2 and create_transactions_from construct the vector of transactions. Then iterate on it and resign. We just need to add 'outs' list in the TX struct for that. Fix default secret keys value when DEBUG_HWDEVICE mode is off The magic value (00...00 for view key and FF..FF for spend key) was not correctly set when DEBUG_HWDEVICE was off. Both was set to 00...00. Add sub-address info in ABP map in order to correctly display destination sub-address on device Fix DEBUG_HWDEVICE mode: - Fix compilation errors. - Fix control device init in ledger device. - Add more log. Fix sub addr control Fix debug Info
2018-03-05 13:46:15 +00:00
bool is_subaddress;
New scheme key destination contrfol Implies protocol version management.
2018-12-11 09:20:21 +00:00
bool is_change_address;
bool additional_key ;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
size_t index;
rct::key Pout;
rct::key AKout;
New scheme key destination contrfol Implies protocol version management.
2018-12-11 09:20:21 +00:00
ABPkeys(const rct::key& A, const rct::key& B, const bool is_subaddr, bool is_subaddress, bool is_change_address, size_t index, const rct::key& P,const rct::key& AK);
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
ABPkeys(const ABPkeys& keys) ;
device_ledger: fix uninitialized additional_key Coverity 200185
2019-07-03 13:52:40 +00:00
ABPkeys() {index=0;is_subaddress=false;is_change_address=false;additional_key=false;}
Fix GCC 9.1 build warnings GCC wants operator= aand copy ctor to be both defined, or neither
2019-06-08 15:58:33 +00:00
ABPkeys &operator=(const ABPkeys &keys);
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
};
class Keymap {
public:
std::vector<ABPkeys> ABP;
bool find(const rct::key& P, ABPkeys& keys) const;
void add(const ABPkeys& keys);
void clear();
void log();
};
Add hmac over encrypted value during transaction
2019-09-25 12:31:14 +00:00
class SecHMAC {
public:
uint32_t sec[32];
uint32_t hmac[32];
SecHMAC(const uint8_t s[32], const uint8_t m[32]);
};
class HMACmap {
public:
std::vector<SecHMAC> hmacs;
void find_mac(const uint8_t sec[32], uint8_t hmac[32]) ;
void add_mac(const uint8_t sec[32], const uint8_t hmac[32]) ;
void clear() ;
};
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
#define BUFFER_SEND_SIZE 262
#define BUFFER_RECV_SIZE 262
class device_ledger : public hw::device {
private:
Change mutex lock model to avoid dead lock and ensure locks are always released. Additional cosmetic fixes: move 'name' as protected remove unnecessary local var Fix debug log
2018-03-26 10:38:38 +00:00
// Locker for concurrent access
mutable boost::recursive_mutex device_locker;
mutable boost::mutex command_locker;
Replace USB-CCID (smartcard) by USB-HID Remove PCSC dependencies which is a bit hard (not user friendly) to install on linux and Mac Split Ledger logic and device IO
2018-08-01 07:24:53 +00:00
//IO
hw::io::device_io_hid hw_device;
unsigned int length_send;
unsigned char buffer_send[BUFFER_SEND_SIZE];
unsigned int length_recv;
unsigned char buffer_recv[BUFFER_RECV_SIZE];
unsigned int sw;
unsigned int id;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
void logCMD(void);
void logRESP(void);
device_ledger: include status code name in error message
2020-02-07 14:20:38 +00:00
unsigned int exchange(unsigned int ok=SW_OK, unsigned int mask=0xFFFF);
unsigned int exchange_wait_on_input(unsigned int ok=SW_OK, unsigned int mask=0xFFFF);
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
void reset_buffer(void);
Replace USB-CCID (smartcard) by USB-HID Remove PCSC dependencies which is a bit hard (not user friendly) to install on linux and Mac Split Ledger logic and device IO
2018-08-01 07:24:53 +00:00
int set_command_header(unsigned char ins, unsigned char p1 = 0x00, unsigned char p2 = 0x00);
int set_command_header_noopt(unsigned char ins, unsigned char p1 = 0x00, unsigned char p2 = 0x00);
void send_simple(unsigned char ins, unsigned char p1 = 0x00);
Add hmac over encrypted value during transaction
2019-09-25 12:31:14 +00:00
void send_secret(const unsigned char sec[32], int &offset);
void receive_secret(unsigned char sec[32], int &offset);
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
Add the possibility to export private view key for fast scan. On client startup the device asks for authorization to export the private view key. If user agree, the client hold the private view key allowing a fast blockchain scan. If the user does not agree, the blockchain scan is fully done via the device.
2018-03-26 10:55:48 +00:00
// hw running mode
device_mode mode;
Add hmac over encrypted value during transaction
2019-09-25 12:31:14 +00:00
bool tx_in_progress;
Add the possibility to export private view key for fast scan. On client startup the device asks for authorization to export the private view key. If user agree, the client hold the private view key allowing a fast blockchain scan. If the user does not agree, the blockchain scan is fully done via the device.
2018-03-26 10:55:48 +00:00
// map public destination key to ephemeral destination key
Keymap key_map;
New scheme key destination contrfol Implies protocol version management.
2018-12-11 09:20:21 +00:00
bool add_output_key_mapping(const crypto::public_key &Aout, const crypto::public_key &Bout, const bool is_subaddress, const bool is_change,
const bool need_additional, const size_t real_output_index,
const rct::key &amount_key, const crypto::public_key &out_eph_public_key);
Add hmac over encrypted value during transaction
2019-09-25 12:31:14 +00:00
//hmac for some encrypted value
HMACmap hmac_map;
Add the possibility to export private view key for fast scan. On client startup the device asks for authorization to export the private view key. If user agree, the client hold the private view key allowing a fast blockchain scan. If the user does not agree, the blockchain scan is fully done via the device.
2018-03-26 10:55:48 +00:00
// To speed up blockchain parsing the view key maybe handle here.
crypto::secret_key viewkey;
bool has_view_key;
//extra debug
Ledger HW Bug fixes Fix the way the REAL mode is handle: Let create_transactions_2 and create_transactions_from construct the vector of transactions. Then iterate on it and resign. We just need to add 'outs' list in the TX struct for that. Fix default secret keys value when DEBUG_HWDEVICE mode is off The magic value (00...00 for view key and FF..FF for spend key) was not correctly set when DEBUG_HWDEVICE was off. Both was set to 00...00. Add sub-address info in ABP map in order to correctly display destination sub-address on device Fix DEBUG_HWDEVICE mode: - Fix compilation errors. - Fix control device init in ledger device. - Add more log. Fix sub addr control Fix debug Info
2018-03-05 13:46:15 +00:00
#ifdef DEBUG_HWDEVICE
device *controle_device;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
#endif
public:
device_ledger();
~device_ledger();
device_ledger(const device_ledger &device) = delete ;
device_ledger& operator=(const device_ledger &device) = delete;
Replace USB-CCID (smartcard) by USB-HID Remove PCSC dependencies which is a bit hard (not user friendly) to install on linux and Mac Split Ledger logic and device IO
2018-08-01 07:24:53 +00:00
explicit operator bool() const override {return this->connected(); }
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
bool reset(void);
/* ======================================================================= */
/* SETUP/TEARDOWN */
/* ======================================================================= */
bool set_name(const std::string &name) override;
const std::string get_name() const override;
bool init(void) override;
bool release() override;
bool connect(void) override;
bool disconnect() override;
Replace USB-CCID (smartcard) by USB-HID Remove PCSC dependencies which is a bit hard (not user friendly) to install on linux and Mac Split Ledger logic and device IO
2018-08-01 07:24:53 +00:00
bool connected(void) const;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
query backing device
2018-08-16 08:31:48 +00:00
bool set_mode(device_mode mode) override;
device: fix warnings about overridden functions
2018-09-21 19:32:47 +00:00
device_type get_type() const override {return device_type::LEDGER;};
device/trezor: trezor support added
2018-08-23 21:50:53 +00:00
device_protocol_t device_protocol() const override { return PROTOCOL_PROXY; };
Change mutex lock model to avoid dead lock and ensure locks are always released. Additional cosmetic fixes: move 'name' as protected remove unnecessary local var Fix debug log
2018-03-26 10:38:38 +00:00
/* ======================================================================= */
/* LOCKER */
/* ======================================================================= */
void lock(void) override;
void unlock(void) override;
bool try_lock(void) override;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
/* ======================================================================= */
/* WALLET & ADDRESS */
/* ======================================================================= */
bool get_public_address(cryptonote::account_public_address &pubkey) override;
bool get_secret_keys(crypto::secret_key &viewkey , crypto::secret_key &spendkey) override;
wallet: allow adjusting number of rounds for the key derivation function
2018-07-06 06:42:08 +00:00
bool generate_chacha_key(const cryptonote::account_keys &keys, crypto::chacha_key &key, uint64_t kdf_rounds) override;
Add display address
2019-09-28 12:03:51 +00:00
void display_address(const cryptonote::subaddress_index& index, const boost::optional<crypto::hash8> &payment_id) override;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
/* ======================================================================= */
/* SUB ADDRESS */
/* ======================================================================= */
bool derive_subaddress_public_key(const crypto::public_key &pub, const crypto::key_derivation &derivation, const std::size_t output_index, crypto::public_key &derived_pub) override;
device: made function prototypes consistent with pre-#3303 codebase
2018-03-05 05:24:48 +00:00
crypto::public_key get_subaddress_spend_public_key(const cryptonote::account_keys& keys, const cryptonote::subaddress_index& index) override;
std::vector<crypto::public_key> get_subaddress_spend_public_keys(const cryptonote::account_keys &keys, uint32_t account, uint32_t begin, uint32_t end) override;
cryptonote::account_public_address get_subaddress(const cryptonote::account_keys& keys, const cryptonote::subaddress_index &index) override;
crypto::secret_key get_subaddress_secret_key(const crypto::secret_key &sec, const cryptonote::subaddress_index &index) override;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
/* ======================================================================= */
/* DERIVATION & KEY */
/* ======================================================================= */
bool verify_keys(const crypto::secret_key &secret_key, const crypto::public_key &public_key) override;
bool scalarmultKey(rct::key & aP, const rct::key &P, const rct::key &a) override;
bool scalarmultBase(rct::key &aG, const rct::key &a) override;
bool sc_secret_add(crypto::secret_key &r, const crypto::secret_key &a, const crypto::secret_key &b) override;
device: made function prototypes consistent with pre-#3303 codebase
2018-03-05 05:24:48 +00:00
crypto::secret_key generate_keys(crypto::public_key &pub, crypto::secret_key &sec, const crypto::secret_key& recovery_key = crypto::secret_key(), bool recover = false) override;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
bool generate_key_derivation(const crypto::public_key &pub, const crypto::secret_key &sec, crypto::key_derivation &derivation) override;
device: add a one off override keyword where appropriate
2018-04-13 21:21:43 +00:00
bool conceal_derivation(crypto::key_derivation &derivation, const crypto::public_key &tx_pub_key, const std::vector<crypto::public_key> &additional_tx_pub_keys, const crypto::key_derivation &main_derivation, const std::vector<crypto::key_derivation> &additional_derivations) override;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
bool derivation_to_scalar(const crypto::key_derivation &derivation, const size_t output_index, crypto::ec_scalar &res) override;
bool derive_secret_key(const crypto::key_derivation &derivation, const std::size_t output_index, const crypto::secret_key &sec, crypto::secret_key &derived_sec) override;
bool derive_public_key(const crypto::key_derivation &derivation, const std::size_t output_index, const crypto::public_key &pub, crypto::public_key &derived_pub) override;
bool secret_key_to_public_key(const crypto::secret_key &sec, crypto::public_key &pub) override;
bool generate_key_image(const crypto::public_key &pub, const crypto::secret_key &sec, crypto::key_image &image) override;
/* ======================================================================= */
/* TRANSACTION */
/* ======================================================================= */
Add get_tx_proof support, needed for new sanity check Enhance debug info
2019-03-21 16:22:43 +00:00
void generate_tx_proof(const crypto::hash &prefix_hash,
const crypto::public_key &R, const crypto::public_key &A, const boost::optional<crypto::public_key> &B, const crypto::public_key &D, const crypto::secret_key &r,
crypto::signature &sig) override;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
bool open_tx(crypto::secret_key &tx_key) override;
Add timelock verification on device
2020-04-03 20:56:55 +00:00
void get_transaction_prefix_hash(const cryptonote::transaction_prefix& tx, crypto::hash& h) override;
device: made function prototypes consistent with pre-#3303 codebase
2018-03-05 05:24:48 +00:00
bool encrypt_payment_id(crypto::hash8 &payment_id, const crypto::public_key &public_key, const crypto::secret_key &secret_key) override;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
Add support for V11 protocol with BulletProofV2 and short amount. New scheme key destination contrfol Fix dummy decryption in debug mode
2018-12-11 09:20:21 +00:00
rct::key genCommitmentMask(const rct::key &amount_key) override;
ringct: encode 8 byte amount, saving 24 bytes per output Found by knaccc
2019-01-06 19:49:52 +00:00
bool ecdhEncode(rct::ecdhTuple & unmasked, const rct::key & sharedSec, bool short_format) override;
bool ecdhDecode(rct::ecdhTuple & masked, const rct::key & sharedSec, bool short_format) override;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
New scheme key destination contrfol Implies protocol version management.
2018-12-11 09:20:21 +00:00
bool generate_output_ephemeral_keys(const size_t tx_version, const cryptonote::account_keys &sender_account_keys, const crypto::public_key &txkey_pub, const crypto::secret_key &tx_key,
const cryptonote::tx_destination_entry &dst_entr, const boost::optional<cryptonote::account_public_address> &change_addr, const size_t output_index,
const bool &need_additional_txkeys, const std::vector<crypto::secret_key> &additional_tx_keys,
std::vector<crypto::public_key> &additional_tx_public_keys,
std::vector<rct::key> &amount_keys,
crypto::public_key &out_eph_public_key) override;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
bool mlsag_prehash(const std::string &blob, size_t inputs_size, size_t outputs_size, const rct::keyV &hashes, const rct::ctkeyV &outPk, rct::key &prehash) override;
bool mlsag_prepare(const rct::key &H, const rct::key &xx, rct::key &a, rct::key &aG, rct::key &aHP, rct::key &rvII) override;
bool mlsag_prepare(rct::key &a, rct::key &aG) override;
bool mlsag_hash(const rct::keyV &long_message, rct::key &c) override;
bool mlsag_sign( const rct::key &c, const rct::keyV &xx, const rct::keyV &alpha, const size_t rows, const size_t dsRows, rct::keyV &ss) override;
bool close_tx(void) override;
};
Ledger HW Bug fixes Fix the way the REAL mode is handle: Let create_transactions_2 and create_transactions_from construct the vector of transactions. Then iterate on it and resign. We just need to add 'outs' list in the TX struct for that. Fix default secret keys value when DEBUG_HWDEVICE mode is off The magic value (00...00 for view key and FF..FF for spend key) was not correctly set when DEBUG_HWDEVICE was off. Both was set to 00...00. Add sub-address info in ABP map in order to correctly display destination sub-address on device Fix DEBUG_HWDEVICE mode: - Fix compilation errors. - Fix control device init in ledger device. - Add more log. Fix sub addr control Fix debug Info
2018-03-05 13:46:15 +00:00
#ifdef DEBUG_HWDEVICE
Add the possibility to export private view key for fast scan. On client startup the device asks for authorization to export the private view key. If user agree, the client hold the private view key allowing a fast blockchain scan. If the user does not agree, the blockchain scan is fully done via the device.
2018-03-26 10:55:48 +00:00
extern crypto::secret_key dbg_viewkey;
extern crypto::secret_key dbg_spendkey;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
#endif
#endif //WITH_DEVICE_LEDGER
}
}
Reference in a new issue Copy permalink