d0s3t3ch/wownero
1
0
Fork 0
mirror of https://git.wownero.com/wownero/wownero.git synced 2024-08-15 01:03:23 +00:00
Code Issues Projects Releases Wiki Activity
wownero/src/device/device_default.cpp

424 lines
20 KiB
C++
Raw Normal View History

Update 2019 copyright
2019-03-05 21:05:34 +00:00
// Copyright (c) 2017-2019, The Monero Project
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification, are
// permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this list of
// conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice, this list
// of conditions and the following disclaimer in the documentation and/or other
// materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its contributors may be
// used to endorse or promote products derived from this software without specific
// prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
#include "device_default.hpp"
move int-util.h to epee
2018-11-18 10:17:24 +00:00
#include "int-util.h"
device: untangle cyclic depenency When #3303 was merged, a cyclic dependency chain was generated: libdevice <- libcncrypto <- libringct <- libdevice This was because libdevice needs access to a set of basic crypto operations implemented in libringct such as scalarmultBase(), while libringct also needs access to abstracted crypto operations implemented in libdevice such as ecdhEncode(). To untangle this cyclic dependency chain, this patch splits libringct into libringct_basic and libringct, where the basic crypto ops previously in libringct are moved into libringct_basic. The cyclic dependency is now resolved thanks to this separation: libcncrypto <- libringct_basic <- libdevice <- libcryptonote_basic <- libringct This eliminates the need for crypto_device.cpp and rctOps_device.cpp. Also, many abstracted interfaces of hw::device such as encrypt_payment_id() and get_subaddress_secret_key() were previously implemented in libcryptonote_basic (cryptonote_format_utils.cpp) and were then called from hw::core::device_default, which is odd because libdevice is supposed to be independent of libcryptonote_basic. Therefore, those functions were moved to device_default.cpp.
2018-03-05 07:16:30 +00:00
#include "cryptonote_basic/account.h"
#include "cryptonote_basic/subaddress_index.h"
New scheme key destination contrfol Implies protocol version management.
2018-12-11 09:20:21 +00:00
#include "cryptonote_core/cryptonote_tx_utils.h"
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
#include "ringct/rctOps.h"
Hash domain separation
2020-04-01 12:31:00 +00:00
#include "cryptonote_config.h"
device: untangle cyclic depenency When #3303 was merged, a cyclic dependency chain was generated: libdevice <- libcncrypto <- libringct <- libdevice This was because libdevice needs access to a set of basic crypto operations implemented in libringct such as scalarmultBase(), while libringct also needs access to abstracted crypto operations implemented in libdevice such as ecdhEncode(). To untangle this cyclic dependency chain, this patch splits libringct into libringct_basic and libringct, where the basic crypto ops previously in libringct are moved into libringct_basic. The cyclic dependency is now resolved thanks to this separation: libcncrypto <- libringct_basic <- libdevice <- libcryptonote_basic <- libringct This eliminates the need for crypto_device.cpp and rctOps_device.cpp. Also, many abstracted interfaces of hw::device such as encrypt_payment_id() and get_subaddress_secret_key() were previously implemented in libcryptonote_basic (cryptonote_format_utils.cpp) and were then called from hw::core::device_default, which is odd because libdevice is supposed to be independent of libcryptonote_basic. Therefore, those functions were moved to device_default.cpp.
2018-03-05 07:16:30 +00:00
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
namespace hw {
namespace core {
device_default::device_default() { }
device_default::~device_default() { }
/* ===================================================================== */
/* === Misc ==== */
/* ===================================================================== */
static inline unsigned char *operator &(crypto::ec_scalar &scalar) {
return &reinterpret_cast<unsigned char &>(scalar);
}
static inline const unsigned char *operator &(const crypto::ec_scalar &scalar) {
return &reinterpret_cast<const unsigned char &>(scalar);
}
/* ======================================================================= */
/* SETUP/TEARDOWN */
/* ======================================================================= */
bool device_default::set_name(const std::string &name) {
this->name = name;
return true;
}
const std::string device_default::get_name() const {
return this->name;
}
bool device_default::init(void) {
device/trezor: trezor support added
2018-08-23 21:50:53 +00:00
return true;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
bool device_default::release() {
device/trezor: trezor support added
2018-08-23 21:50:53 +00:00
return true;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
bool device_default::connect(void) {
device/trezor: trezor support added
2018-08-23 21:50:53 +00:00
return true;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
bool device_default::disconnect() {
device/trezor: trezor support added
2018-08-23 21:50:53 +00:00
return true;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
Add the possibility to export private view key for fast scan. On client startup the device asks for authorization to export the private view key. If user agree, the client hold the private view key allowing a fast blockchain scan. If the user does not agree, the blockchain scan is fully done via the device.
2018-03-26 10:55:48 +00:00
bool device_default::set_mode(device_mode mode) {
ringct: use dummy bulletproofs when in fake mode, for speed
2018-10-19 11:15:31 +00:00
return device::set_mode(mode);
Add the possibility to export private view key for fast scan. On client startup the device asks for authorization to export the private view key. If user agree, the client hold the private view key allowing a fast blockchain scan. If the user does not agree, the blockchain scan is fully done via the device.
2018-03-26 10:55:48 +00:00
}
Change mutex lock model to avoid dead lock and ensure locks are always released. Additional cosmetic fixes: move 'name' as protected remove unnecessary local var Fix debug log
2018-03-26 10:38:38 +00:00
/* ======================================================================= */
/* LOCKER */
/* ======================================================================= */
void device_default::lock() { }
bool device_default::try_lock() { return true; }
void device_default::unlock() { }
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
/* ======================================================================= */
/* WALLET & ADDRESS */
/* ======================================================================= */
wallet: allow adjusting number of rounds for the key derivation function
2018-07-06 06:42:08 +00:00
bool device_default::generate_chacha_key(const cryptonote::account_keys &keys, crypto::chacha_key &key, uint64_t kdf_rounds) {
device: untangle cyclic depenency When #3303 was merged, a cyclic dependency chain was generated: libdevice <- libcncrypto <- libringct <- libdevice This was because libdevice needs access to a set of basic crypto operations implemented in libringct such as scalarmultBase(), while libringct also needs access to abstracted crypto operations implemented in libdevice such as ecdhEncode(). To untangle this cyclic dependency chain, this patch splits libringct into libringct_basic and libringct, where the basic crypto ops previously in libringct are moved into libringct_basic. The cyclic dependency is now resolved thanks to this separation: libcncrypto <- libringct_basic <- libdevice <- libcryptonote_basic <- libringct This eliminates the need for crypto_device.cpp and rctOps_device.cpp. Also, many abstracted interfaces of hw::device such as encrypt_payment_id() and get_subaddress_secret_key() were previously implemented in libcryptonote_basic (cryptonote_format_utils.cpp) and were then called from hw::core::device_default, which is odd because libdevice is supposed to be independent of libcryptonote_basic. Therefore, those functions were moved to device_default.cpp.
2018-03-05 07:16:30 +00:00
const crypto::secret_key &view_key = keys.m_view_secret_key;
const crypto::secret_key &spend_key = keys.m_spend_secret_key;
crypto: make secret_key automatically mlock
2018-07-15 13:33:48 +00:00
epee::mlocked<tools::scrubbed_arr<char, sizeof(view_key) + sizeof(spend_key) + 1>> data;
device: untangle cyclic depenency When #3303 was merged, a cyclic dependency chain was generated: libdevice <- libcncrypto <- libringct <- libdevice This was because libdevice needs access to a set of basic crypto operations implemented in libringct such as scalarmultBase(), while libringct also needs access to abstracted crypto operations implemented in libdevice such as ecdhEncode(). To untangle this cyclic dependency chain, this patch splits libringct into libringct_basic and libringct, where the basic crypto ops previously in libringct are moved into libringct_basic. The cyclic dependency is now resolved thanks to this separation: libcncrypto <- libringct_basic <- libdevice <- libcryptonote_basic <- libringct This eliminates the need for crypto_device.cpp and rctOps_device.cpp. Also, many abstracted interfaces of hw::device such as encrypt_payment_id() and get_subaddress_secret_key() were previously implemented in libcryptonote_basic (cryptonote_format_utils.cpp) and were then called from hw::core::device_default, which is odd because libdevice is supposed to be independent of libcryptonote_basic. Therefore, those functions were moved to device_default.cpp.
2018-03-05 07:16:30 +00:00
memcpy(data.data(), &view_key, sizeof(view_key));
memcpy(data.data() + sizeof(view_key), &spend_key, sizeof(spend_key));
Hash domain separation
2020-04-01 12:31:00 +00:00
data[sizeof(data) - 1] = config::HASH_KEY_WALLET;
wallet: allow adjusting number of rounds for the key derivation function
2018-07-06 06:42:08 +00:00
crypto::generate_chacha_key(data.data(), sizeof(data), key, kdf_rounds);
device: untangle cyclic depenency When #3303 was merged, a cyclic dependency chain was generated: libdevice <- libcncrypto <- libringct <- libdevice This was because libdevice needs access to a set of basic crypto operations implemented in libringct such as scalarmultBase(), while libringct also needs access to abstracted crypto operations implemented in libdevice such as ecdhEncode(). To untangle this cyclic dependency chain, this patch splits libringct into libringct_basic and libringct, where the basic crypto ops previously in libringct are moved into libringct_basic. The cyclic dependency is now resolved thanks to this separation: libcncrypto <- libringct_basic <- libdevice <- libcryptonote_basic <- libringct This eliminates the need for crypto_device.cpp and rctOps_device.cpp. Also, many abstracted interfaces of hw::device such as encrypt_payment_id() and get_subaddress_secret_key() were previously implemented in libcryptonote_basic (cryptonote_format_utils.cpp) and were then called from hw::core::device_default, which is odd because libdevice is supposed to be independent of libcryptonote_basic. Therefore, those functions were moved to device_default.cpp.
2018-03-05 07:16:30 +00:00
return true;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
bool device_default::get_public_address(cryptonote::account_public_address &pubkey) {
dfns();
}
bool device_default::get_secret_keys(crypto::secret_key &viewkey , crypto::secret_key &spendkey) {
dfns();
}
/* ======================================================================= */
/* SUB ADDRESS */
/* ======================================================================= */
bool device_default::derive_subaddress_public_key(const crypto::public_key &out_key, const crypto::key_derivation &derivation, const std::size_t output_index, crypto::public_key &derived_key) {
return crypto::derive_subaddress_public_key(out_key, derivation, output_index,derived_key);
}
device: made function prototypes consistent with pre-#3303 codebase
2018-03-05 05:24:48 +00:00
crypto::public_key device_default::get_subaddress_spend_public_key(const cryptonote::account_keys& keys, const cryptonote::subaddress_index &index) {
device: untangle cyclic depenency When #3303 was merged, a cyclic dependency chain was generated: libdevice <- libcncrypto <- libringct <- libdevice This was because libdevice needs access to a set of basic crypto operations implemented in libringct such as scalarmultBase(), while libringct also needs access to abstracted crypto operations implemented in libdevice such as ecdhEncode(). To untangle this cyclic dependency chain, this patch splits libringct into libringct_basic and libringct, where the basic crypto ops previously in libringct are moved into libringct_basic. The cyclic dependency is now resolved thanks to this separation: libcncrypto <- libringct_basic <- libdevice <- libcryptonote_basic <- libringct This eliminates the need for crypto_device.cpp and rctOps_device.cpp. Also, many abstracted interfaces of hw::device such as encrypt_payment_id() and get_subaddress_secret_key() were previously implemented in libcryptonote_basic (cryptonote_format_utils.cpp) and were then called from hw::core::device_default, which is odd because libdevice is supposed to be independent of libcryptonote_basic. Therefore, those functions were moved to device_default.cpp.
2018-03-05 07:16:30 +00:00
if (index.is_zero())
return keys.m_account_address.m_spend_public_key;
// m = Hs(a || index_major || index_minor)
crypto::secret_key m = get_subaddress_secret_key(keys.m_view_secret_key, index);
// M = m*G
crypto::public_key M;
crypto::secret_key_to_public_key(m, M);
// D = B + M
crypto::public_key D = rct::rct2pk(rct::addKeys(rct::pk2rct(keys.m_account_address.m_spend_public_key), rct::pk2rct(M)));
return D;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
device: made function prototypes consistent with pre-#3303 codebase
2018-03-05 05:24:48 +00:00
std::vector<crypto::public_key> device_default::get_subaddress_spend_public_keys(const cryptonote::account_keys &keys, uint32_t account, uint32_t begin, uint32_t end) {
device: untangle cyclic depenency When #3303 was merged, a cyclic dependency chain was generated: libdevice <- libcncrypto <- libringct <- libdevice This was because libdevice needs access to a set of basic crypto operations implemented in libringct such as scalarmultBase(), while libringct also needs access to abstracted crypto operations implemented in libdevice such as ecdhEncode(). To untangle this cyclic dependency chain, this patch splits libringct into libringct_basic and libringct, where the basic crypto ops previously in libringct are moved into libringct_basic. The cyclic dependency is now resolved thanks to this separation: libcncrypto <- libringct_basic <- libdevice <- libcryptonote_basic <- libringct This eliminates the need for crypto_device.cpp and rctOps_device.cpp. Also, many abstracted interfaces of hw::device such as encrypt_payment_id() and get_subaddress_secret_key() were previously implemented in libcryptonote_basic (cryptonote_format_utils.cpp) and were then called from hw::core::device_default, which is odd because libdevice is supposed to be independent of libcryptonote_basic. Therefore, those functions were moved to device_default.cpp.
2018-03-05 07:16:30 +00:00
CHECK_AND_ASSERT_THROW_MES(begin <= end, "begin > end");
std::vector<crypto::public_key> pkeys;
pkeys.reserve(end - begin);
cryptonote::subaddress_index index = {account, begin};
ge_p3 p3;
ge_cached cached;
CHECK_AND_ASSERT_THROW_MES(ge_frombytes_vartime(&p3, (const unsigned char*)keys.m_account_address.m_spend_public_key.data) == 0,
"ge_frombytes_vartime failed to convert spend public key");
ge_p3_to_cached(&cached, &p3);
for (uint32_t idx = begin; idx < end; ++idx)
{
index.minor = idx;
if (index.is_zero())
{
pkeys.push_back(keys.m_account_address.m_spend_public_key);
continue;
}
crypto::secret_key m = get_subaddress_secret_key(keys.m_view_secret_key, index);
// M = m*G
ge_scalarmult_base(&p3, (const unsigned char*)m.data);
// D = B + M
crypto::public_key D;
ge_p1p1 p1p1;
ge_add(&p1p1, &p3, &cached);
ge_p1p1_to_p3(&p3, &p1p1);
ge_p3_tobytes((unsigned char*)D.data, &p3);
pkeys.push_back(D);
}
return pkeys;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
device: made function prototypes consistent with pre-#3303 codebase
2018-03-05 05:24:48 +00:00
cryptonote::account_public_address device_default::get_subaddress(const cryptonote::account_keys& keys, const cryptonote::subaddress_index &index) {
device: untangle cyclic depenency When #3303 was merged, a cyclic dependency chain was generated: libdevice <- libcncrypto <- libringct <- libdevice This was because libdevice needs access to a set of basic crypto operations implemented in libringct such as scalarmultBase(), while libringct also needs access to abstracted crypto operations implemented in libdevice such as ecdhEncode(). To untangle this cyclic dependency chain, this patch splits libringct into libringct_basic and libringct, where the basic crypto ops previously in libringct are moved into libringct_basic. The cyclic dependency is now resolved thanks to this separation: libcncrypto <- libringct_basic <- libdevice <- libcryptonote_basic <- libringct This eliminates the need for crypto_device.cpp and rctOps_device.cpp. Also, many abstracted interfaces of hw::device such as encrypt_payment_id() and get_subaddress_secret_key() were previously implemented in libcryptonote_basic (cryptonote_format_utils.cpp) and were then called from hw::core::device_default, which is odd because libdevice is supposed to be independent of libcryptonote_basic. Therefore, those functions were moved to device_default.cpp.
2018-03-05 07:16:30 +00:00
if (index.is_zero())
return keys.m_account_address;
crypto::public_key D = get_subaddress_spend_public_key(keys, index);
// C = a*D
crypto::public_key C = rct::rct2pk(rct::scalarmultKey(rct::pk2rct(D), rct::sk2rct(keys.m_view_secret_key)));
// result: (C, D)
cryptonote::account_public_address address;
address.m_view_public_key = C;
address.m_spend_public_key = D;
return address;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
device: made function prototypes consistent with pre-#3303 codebase
2018-03-05 05:24:48 +00:00
crypto::secret_key device_default::get_subaddress_secret_key(const crypto::secret_key &a, const cryptonote::subaddress_index &index) {
Hash domain separation
2020-04-01 12:31:00 +00:00
char data[sizeof(config::HASH_KEY_SUBADDRESS) + sizeof(crypto::secret_key) + 2 * sizeof(uint32_t)];
memcpy(data, config::HASH_KEY_SUBADDRESS, sizeof(config::HASH_KEY_SUBADDRESS));
memcpy(data + sizeof(config::HASH_KEY_SUBADDRESS), &a, sizeof(crypto::secret_key));
device: fix endianess dependence on subaddress secret key generation We now force little endianness
2018-03-28 10:09:29 +00:00
uint32_t idx = SWAP32LE(index.major);
Hash domain separation
2020-04-01 12:31:00 +00:00
memcpy(data + sizeof(config::HASH_KEY_SUBADDRESS) + sizeof(crypto::secret_key), &idx, sizeof(uint32_t));
device: fix endianess dependence on subaddress secret key generation We now force little endianness
2018-03-28 10:09:29 +00:00
idx = SWAP32LE(index.minor);
Hash domain separation
2020-04-01 12:31:00 +00:00
memcpy(data + sizeof(config::HASH_KEY_SUBADDRESS) + sizeof(crypto::secret_key) + sizeof(uint32_t), &idx, sizeof(uint32_t));
device: untangle cyclic depenency When #3303 was merged, a cyclic dependency chain was generated: libdevice <- libcncrypto <- libringct <- libdevice This was because libdevice needs access to a set of basic crypto operations implemented in libringct such as scalarmultBase(), while libringct also needs access to abstracted crypto operations implemented in libdevice such as ecdhEncode(). To untangle this cyclic dependency chain, this patch splits libringct into libringct_basic and libringct, where the basic crypto ops previously in libringct are moved into libringct_basic. The cyclic dependency is now resolved thanks to this separation: libcncrypto <- libringct_basic <- libdevice <- libcryptonote_basic <- libringct This eliminates the need for crypto_device.cpp and rctOps_device.cpp. Also, many abstracted interfaces of hw::device such as encrypt_payment_id() and get_subaddress_secret_key() were previously implemented in libcryptonote_basic (cryptonote_format_utils.cpp) and were then called from hw::core::device_default, which is odd because libdevice is supposed to be independent of libcryptonote_basic. Therefore, those functions were moved to device_default.cpp.
2018-03-05 07:16:30 +00:00
crypto::secret_key m;
crypto::hash_to_scalar(data, sizeof(data), m);
return m;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
/* ======================================================================= */
/* DERIVATION & KEY */
/* ======================================================================= */
bool device_default::verify_keys(const crypto::secret_key &secret_key, const crypto::public_key &public_key) {
device: untangle cyclic depenency When #3303 was merged, a cyclic dependency chain was generated: libdevice <- libcncrypto <- libringct <- libdevice This was because libdevice needs access to a set of basic crypto operations implemented in libringct such as scalarmultBase(), while libringct also needs access to abstracted crypto operations implemented in libdevice such as ecdhEncode(). To untangle this cyclic dependency chain, this patch splits libringct into libringct_basic and libringct, where the basic crypto ops previously in libringct are moved into libringct_basic. The cyclic dependency is now resolved thanks to this separation: libcncrypto <- libringct_basic <- libdevice <- libcryptonote_basic <- libringct This eliminates the need for crypto_device.cpp and rctOps_device.cpp. Also, many abstracted interfaces of hw::device such as encrypt_payment_id() and get_subaddress_secret_key() were previously implemented in libcryptonote_basic (cryptonote_format_utils.cpp) and were then called from hw::core::device_default, which is odd because libdevice is supposed to be independent of libcryptonote_basic. Therefore, those functions were moved to device_default.cpp.
2018-03-05 07:16:30 +00:00
crypto::public_key calculated_pub;
bool r = crypto::secret_key_to_public_key(secret_key, calculated_pub);
return r && public_key == calculated_pub;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
bool device_default::scalarmultKey(rct::key & aP, const rct::key &P, const rct::key &a) {
rct::scalarmultKey(aP, P,a);
return true;
}
bool device_default::scalarmultBase(rct::key &aG, const rct::key &a) {
rct::scalarmultBase(aG,a);
return true;
}
bool device_default::sc_secret_add(crypto::secret_key &r, const crypto::secret_key &a, const crypto::secret_key &b) {
sc_add(&r, &a, &b);
return true;
}
device: made function prototypes consistent with pre-#3303 codebase
2018-03-05 05:24:48 +00:00
crypto::secret_key device_default::generate_keys(crypto::public_key &pub, crypto::secret_key &sec, const crypto::secret_key& recovery_key, bool recover) {
return crypto::generate_keys(pub, sec, recovery_key, recover);
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
bool device_default::generate_key_derivation(const crypto::public_key &key1, const crypto::secret_key &key2, crypto::key_derivation &derivation) {
return crypto::generate_key_derivation(key1, key2, derivation);
}
bool device_default::derivation_to_scalar(const crypto::key_derivation &derivation, const size_t output_index, crypto::ec_scalar &res){
crypto::derivation_to_scalar(derivation,output_index, res);
return true;
}
bool device_default::derive_secret_key(const crypto::key_derivation &derivation, const std::size_t output_index, const crypto::secret_key &base, crypto::secret_key &derived_key){
crypto::derive_secret_key(derivation, output_index, base, derived_key);
return true;
}
bool device_default::derive_public_key(const crypto::key_derivation &derivation, const std::size_t output_index, const crypto::public_key &base, crypto::public_key &derived_key){
return crypto::derive_public_key(derivation, output_index, base, derived_key);
}
bool device_default::secret_key_to_public_key(const crypto::secret_key &sec, crypto::public_key &pub) {
return crypto::secret_key_to_public_key(sec,pub);
}
bool device_default::generate_key_image(const crypto::public_key &pub, const crypto::secret_key &sec, crypto::key_image &image){
crypto::generate_key_image(pub, sec,image);
Fix sub-address tx scan. When additional keys was needed, the TX scan failed because the derivation data was always recomputed with the main tx_key and not the corresponding additional one. Moreover this patch avoid perf decreasing when not using HW device.
2018-04-09 14:07:11 +00:00
return true;
}
bool device_default::conceal_derivation(crypto::key_derivation &derivation, const crypto::public_key &tx_pub_key, const std::vector<crypto::public_key> &additional_tx_pub_keys, const crypto::key_derivation &main_derivation, const std::vector<crypto::key_derivation> &additional_derivations){
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
return true;
}
/* ======================================================================= */
/* TRANSACTION */
/* ======================================================================= */
Add get_tx_proof support, needed for new sanity check Enhance debug info
2019-03-21 16:22:43 +00:00
void device_default::generate_tx_proof(const crypto::hash &prefix_hash,
const crypto::public_key &R, const crypto::public_key &A, const boost::optional<crypto::public_key> &B, const crypto::public_key &D, const crypto::secret_key &r,
crypto::signature &sig) {
crypto::generate_tx_proof(prefix_hash, R, A, B, D, r, sig);
}
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
bool device_default::open_tx(crypto::secret_key &tx_key) {
keypair::generate: always require hw::device to avoid possible mistake
2018-03-05 08:02:17 +00:00
cryptonote::keypair txkey = cryptonote::keypair::generate(*this);
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
tx_key = txkey.sec;
return true;
}
Add timelock verification on device
2020-04-03 20:56:55 +00:00
void device_default::get_transaction_prefix_hash(const cryptonote::transaction_prefix& tx, crypto::hash& h) {
cryptonote::get_transaction_prefix_hash(tx, h);
}
New scheme key destination contrfol Implies protocol version management.
2018-12-11 09:20:21 +00:00
bool device_default::generate_output_ephemeral_keys(const size_t tx_version,
const cryptonote::account_keys &sender_account_keys, const crypto::public_key &txkey_pub, const crypto::secret_key &tx_key,
const cryptonote::tx_destination_entry &dst_entr, const boost::optional<cryptonote::account_public_address> &change_addr, const size_t output_index,
const bool &need_additional_txkeys, const std::vector<crypto::secret_key> &additional_tx_keys,
std::vector<crypto::public_key> &additional_tx_public_keys,
std::vector<rct::key> &amount_keys, crypto::public_key &out_eph_public_key) {
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
New scheme key destination contrfol Implies protocol version management.
2018-12-11 09:20:21 +00:00
crypto::key_derivation derivation;
// make additional tx pubkey if necessary
cryptonote::keypair additional_txkey;
if (need_additional_txkeys)
{
additional_txkey.sec = additional_tx_keys[output_index];
if (dst_entr.is_subaddress)
additional_txkey.pub = rct::rct2pk(rct::scalarmultKey(rct::pk2rct(dst_entr.addr.m_spend_public_key), rct::sk2rct(additional_txkey.sec)));
else
additional_txkey.pub = rct::rct2pk(rct::scalarmultBase(rct::sk2rct(additional_txkey.sec)));
}
bool r;
if (change_addr && dst_entr.addr == *change_addr)
{
// sending change to yourself; derivation = a*R
r = generate_key_derivation(txkey_pub, sender_account_keys.m_view_secret_key, derivation);
CHECK_AND_ASSERT_MES(r, false, "at creation outs: failed to generate_key_derivation(" << txkey_pub << ", " << sender_account_keys.m_view_secret_key << ")");
}
else
{
// sending to the recipient; derivation = r*A (or s*C in the subaddress scheme)
r = generate_key_derivation(dst_entr.addr.m_view_public_key, dst_entr.is_subaddress && need_additional_txkeys ? additional_txkey.sec : tx_key, derivation);
CHECK_AND_ASSERT_MES(r, false, "at creation outs: failed to generate_key_derivation(" << dst_entr.addr.m_view_public_key << ", " << (dst_entr.is_subaddress && need_additional_txkeys ? additional_txkey.sec : tx_key) << ")");
}
if (need_additional_txkeys)
{
additional_tx_public_keys.push_back(additional_txkey.pub);
}
if (tx_version > 1)
{
crypto::secret_key scalar1;
derivation_to_scalar(derivation, output_index, scalar1);
amount_keys.push_back(rct::sk2rct(scalar1));
}
r = derive_public_key(derivation, output_index, dst_entr.addr.m_spend_public_key, out_eph_public_key);
CHECK_AND_ASSERT_MES(r, false, "at creation outs: failed to derive_public_key(" << derivation << ", " << output_index << ", "<< dst_entr.addr.m_spend_public_key << ")");
return r;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
device: made function prototypes consistent with pre-#3303 codebase
2018-03-05 05:24:48 +00:00
bool device_default::encrypt_payment_id(crypto::hash8 &payment_id, const crypto::public_key &public_key, const crypto::secret_key &secret_key) {
device: untangle cyclic depenency When #3303 was merged, a cyclic dependency chain was generated: libdevice <- libcncrypto <- libringct <- libdevice This was because libdevice needs access to a set of basic crypto operations implemented in libringct such as scalarmultBase(), while libringct also needs access to abstracted crypto operations implemented in libdevice such as ecdhEncode(). To untangle this cyclic dependency chain, this patch splits libringct into libringct_basic and libringct, where the basic crypto ops previously in libringct are moved into libringct_basic. The cyclic dependency is now resolved thanks to this separation: libcncrypto <- libringct_basic <- libdevice <- libcryptonote_basic <- libringct This eliminates the need for crypto_device.cpp and rctOps_device.cpp. Also, many abstracted interfaces of hw::device such as encrypt_payment_id() and get_subaddress_secret_key() were previously implemented in libcryptonote_basic (cryptonote_format_utils.cpp) and were then called from hw::core::device_default, which is odd because libdevice is supposed to be independent of libcryptonote_basic. Therefore, those functions were moved to device_default.cpp.
2018-03-05 07:16:30 +00:00
crypto::key_derivation derivation;
crypto::hash hash;
char data[33]; /* A hash, and an extra byte */
if (!generate_key_derivation(public_key, secret_key, derivation))
return false;
memcpy(data, &derivation, 32);
Hash domain separation
2020-04-01 12:31:00 +00:00
data[32] = config::HASH_KEY_ENCRYPTED_PAYMENT_ID;
device: untangle cyclic depenency When #3303 was merged, a cyclic dependency chain was generated: libdevice <- libcncrypto <- libringct <- libdevice This was because libdevice needs access to a set of basic crypto operations implemented in libringct such as scalarmultBase(), while libringct also needs access to abstracted crypto operations implemented in libdevice such as ecdhEncode(). To untangle this cyclic dependency chain, this patch splits libringct into libringct_basic and libringct, where the basic crypto ops previously in libringct are moved into libringct_basic. The cyclic dependency is now resolved thanks to this separation: libcncrypto <- libringct_basic <- libdevice <- libcryptonote_basic <- libringct This eliminates the need for crypto_device.cpp and rctOps_device.cpp. Also, many abstracted interfaces of hw::device such as encrypt_payment_id() and get_subaddress_secret_key() were previously implemented in libcryptonote_basic (cryptonote_format_utils.cpp) and were then called from hw::core::device_default, which is odd because libdevice is supposed to be independent of libcryptonote_basic. Therefore, those functions were moved to device_default.cpp.
2018-03-05 07:16:30 +00:00
cn_fast_hash(data, 33, hash);
for (size_t b = 0; b < 8; ++b)
payment_id.data[b] ^= hash.data[b];
return true;
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
Add support for V11 protocol with BulletProofV2 and short amount. New scheme key destination contrfol Fix dummy decryption in debug mode
2018-12-11 09:20:21 +00:00
rct::key device_default::genCommitmentMask(const rct::key &amount_key) {
return rct::genCommitmentMask(amount_key);
}
ringct: encode 8 byte amount, saving 24 bytes per output Found by knaccc
2019-01-06 19:49:52 +00:00
bool device_default::ecdhEncode(rct::ecdhTuple & unmasked, const rct::key & sharedSec, bool short_amount) {
rct::ecdhEncode(unmasked, sharedSec, short_amount);
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
return true;
}
ringct: encode 8 byte amount, saving 24 bytes per output Found by knaccc
2019-01-06 19:49:52 +00:00
bool device_default::ecdhDecode(rct::ecdhTuple & masked, const rct::key & sharedSec, bool short_amount) {
rct::ecdhDecode(masked, sharedSec, short_amount);
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
return true;
}
bool device_default::mlsag_prepare(const rct::key &H, const rct::key &xx,
rct::key &a, rct::key &aG, rct::key &aHP, rct::key &II) {
rct::skpkGen(a, aG);
rct::scalarmultKey(aHP, H, a);
rct::scalarmultKey(II, H, xx);
return true;
}
bool device_default::mlsag_prepare(rct::key &a, rct::key &aG) {
rct::skpkGen(a, aG);
return true;
}
bool device_default::mlsag_prehash(const std::string &blob, size_t inputs_size, size_t outputs_size, const rct::keyV &hashes, const rct::ctkeyV &outPk, rct::key &prehash) {
prehash = rct::cn_fast_hash(hashes);
return true;
}
bool device_default::mlsag_hash(const rct::keyV &toHash, rct::key &c_old) {
c_old = rct::hash_to_scalar(toHash);
return true;
}
bool device_default::mlsag_sign(const rct::key &c, const rct::keyV &xx, const rct::keyV &alpha, const size_t rows, const size_t dsRows, rct::keyV &ss ) {
CHECK_AND_ASSERT_THROW_MES(dsRows<=rows, "dsRows greater than rows");
CHECK_AND_ASSERT_THROW_MES(xx.size() == rows, "xx size does not match rows");
CHECK_AND_ASSERT_THROW_MES(alpha.size() == rows, "alpha size does not match rows");
CHECK_AND_ASSERT_THROW_MES(ss.size() == rows, "ss size does not match rows");
for (size_t j = 0; j < rows; j++) {
sc_mulsub(ss[j].bytes, c.bytes, xx[j].bytes, alpha[j].bytes);
}
return true;
}
bool device_default::close_tx() {
return true;
}
/* ---------------------------------------------------------- */
static device_default *default_core_device = NULL;
void register_all(std::map<std::string, std::unique_ptr<device>> &registry) {
if (!default_core_device) {
default_core_device = new device_default();
default_core_device->set_name("default_core_device");
}
Fix invalid device unique_ptr cast
2018-03-04 18:56:48 +00:00
registry.insert(std::make_pair("default", std::unique_ptr<device>(default_core_device)));
Code modifications to integrate Ledger HW device into monero-wallet-cli. The basic approach it to delegate all sensitive data (master key, secret ephemeral key, key derivation, ....) and related operations to the device. As device has low memory, it does not keep itself the values (except for view/spend keys) but once computed there are encrypted (with AES are equivalent) and return back to monero-wallet-cli. When they need to be manipulated by the device, they are decrypted on receive. Moreover, using the client for storing the value in encrypted form limits the modification in the client code. Those values are transfered from one C-structure to another one as previously. The code modification has been done with the wishes to be open to any other hardware wallet. To achieve that a C++ class hw::Device has been introduced. Two initial implementations are provided: the "default", which remaps all calls to initial Monero code, and the "Ledger", which delegates all calls to Ledger device.
2018-02-20 16:01:27 +00:00
}
}
Fix invalid device unique_ptr cast
2018-03-04 18:56:48 +00:00
}
Reference in a new issue Copy permalink