651 commits

Author	SHA1	Message	Date
andodeki	1740da3f34	feat(pdf): render a form XObject to pixels — the golden caught what the ... assertions missed `Rasteriser::register_xobject` takes a form's recorded commands from a caller that can resolve the page dictionary, so Phase 7's last golden-corpus criterion is met with pixels instead of with a request recorded by name. The first golden of that page showed the form drawn at the **page origin**, ignoring the `1 0 0 1 20 20 cm` that placed it. The recorded commands' `SetTransform`s are absolute in form space, and replaying them overwrote the page's CTM rather than composing with it. Nested lists now compose against the CTM in force at the `Do`. The colour assertions written next to that golden all passed while the bug was live — a red square two pixels from where it belongs is still a red square somewhere. That is the argument for pixel goldens in one sentence, and it is why the golden is compared after the assertions and not instead of them. The offset now has its own assertion too. The new fixture's form deliberately overflows its own /BBox, so the clip is visible in the golden as an absence rather than being taken on trust. Phase 7's golden-corpus exit criterion is now met in full. The `ui.rs` smoke tests remain blocked on the Makepad headless backend, as they have been since Phase 1, and are still not claimed as done. 1426 tests pass.	2026-08-18 20:06:50 +00:00
andodeki	d3089bc62a	feat(pdf): nested content, the wire codec and tiled rendering — Phase 7 closed ... Three bullets, and the Phase 7 status table rewritten row by row. **Nested content (ADR 0032).** A form XObject and a Type 3 glyph are the same problem: a content stream inside a content stream. Both were parsed completely and then not run. `paint_x_object` reported the name for "the host" to resolve and no host existed, so `Do` painted nothing. Type 3 was worse because it looked more correct — `d0`/`d1` reached the device, so the pen advanced by the declared width and the page rendered an invisible line of text with correct spacing after it. `nested.rs` runs both, in pdf-graphics because the dependency runs graphics → document and this is the only crate that can see the interpreter and the object model at once. Forms get their `/Matrix`, their `/BBox` clip and a save/restore wrapper, because without the wrapper a form's colour leaks into every object after it and looks like a bug in the document. Type 3 composes translate-then-matrix; the other order scales the translation and puts the glyph at (1.7, 16.8) instead of (72, 700). Recursion is bounded in both: unbounded, a self-referencing form is a stack overflow reachable from an untrusted document, which is a denial of service and not a rendering bug. **Wire codec and tiling (ADR 0033).** `worker.rs` moved interpretation off the UI thread only because both ends shared a Vec. Tags are explicit numbers, never declaration order, so reordering the enum cannot silently make old recordings decode as different commands. Truncation is an error rather than a short list — a decoder that stopped early would render a page missing its last few operations, plausible and wrong. The obvious truncation test failed, correctly: `Save` is one byte, so a cut on a command boundary really is a complete list. It now tries every cut position and requires each to be a named error or a genuine prefix. Tile skipping is conservative. A command whose geometry is unknown is kept, because dropping a state change corrupts everything after it in that tile, silently. Only untransformed geometry that provably falls outside is dropped. Every tile is asserted pixel-identical to that region of the whole-page render: tiling that is fast and different is not an optimisation. Eight mutations across the two modules, all killed. Phase 7 status is now two tables — the eight spec bullets and the exit criteria — with what is missing named in the row rather than rounded up. Three rows are not green: Makepad blend compositing needs render-to-texture, the image-XObject pixel golden asserts the request rather than pixels, and the `ui.rs` smoke tests remain blocked on the headless backend they have been blocked on since Phase 1. 1425 tests pass, coverage 88.10% (was 87.60%), all floors met, external readers pass. ADRs 0032 and 0033.	2026-08-18 20:00:18 +00:00
andodeki	f37197781e	feat(pdf): glyph outlines from TrueType and CFF, and glyph-aware text runs ... `sfnt.rs` read the metric tables and nothing else. It could say how wide a glyph was and not what shape it had, so every renderer drew embedded text with a substitute font at the correct advance — the failure mode that looks most like success: the line breaks land right and the letterforms belong to somebody else. `outline.rs` returns one outline type for both formats. TrueType quadratics are degree-elevated to cubics, which is exact, so no format detail leaks to a consumer. Composite glyphs are placed by their offsets and scales, with a depth bound because a font can reference itself. CFF Type 2 charstrings run through an interpreter with biased local and global subroutines, hints, hintmask byte counting, the leading width operand, and the FontMatrix as declared rather than assumed to be 1/1000. Separately, `ShowTextWithMetrics` carried one advance for a whole run — enough to move the pen to the next run and nothing else. So `text.rs` guessed: `seg.advance / char_count`. For "Wi" that puts the boundary between the letters at 5 when it is at 9, and every caret, drag-selection and search highlight in the application was wrong by that much for every proportional font. `GlyphPlacement` now carries per-glyph pen offsets, computed with the same expression as the run total so the two cannot drift. The even-spacing fallback stays for fonts with no width table, which is what `advance_is_measured` has always been for. The fixture story is ADR 0029's, again. `cff_sample.otf` is a fontTools conversion of DejaVu: no subroutines, no hints, no width operands. It proved the interpreter draws the right shapes, and then four mutations of that interpreter survived because nothing in the corpus reached the code they broke — each of which produces a plausible wrong glyph from a font that parses. `cff_subrs.cff` is hand-assembled for exactly those four, and fontTools agrees with every expectation asserted against it. A fifth mutation survived a composite test that counted contours; it is killed now by one that measures where the components land. Coordinates are asserted against fontTools ground truth, not against our own output. Seven mutations, all killed. 1397 tests pass. Deferred and recorded, not claimed: CID-keyed CFF, `seac` accents, rendering outlines through the Makepad device. ADR 0031.	2026-08-18 19:44:18 +00:00
andodeki	0bef30a6d5	feat(pdf): compositing and overprint — the blend maths had no backdrop ... `transparency.rs` implemented all sixteen blend modes and unit-tested them against the specification's formulas. Nothing ever called them with a backdrop. The Makepad renderer's `SetBlendMode` pushed a `TransparencyError::Unsupported` and then painted the source colour, so a /Multiply highlight and a /Normal one produced byte-identical output and every test passed — because every test asked "was the right command issued", not "does the page look right". Overprint had no code at all. /OP, /op and /OPM were not parsed, so an overprinting object knocked out the inks under it. That is not a missing feature, it is the inverse of the instruction: on a press it is the difference between a colour and a hole. - `composite.rs`: a straight-alpha RGBA `Canvas` implementing §11.3.6's union formula, weighted by backdrop alpha so a Multiply over transparency is the source rather than black. Constant alpha and per-pixel soft masks. Transparency groups composite as a unit; knockout groups are refused by name rather than silently treated as non-knockout. - Overprint as `composite_cmyk`, separate from the RGB path rather than a flag on it: overprint is a statement about inks and RGB has none. /op defaults to /OP per table 58 — defaulting it to false makes the common `<< /OP true >>` knock out every fill. §10.7.5's "no effect on an RGB device" is asserted, so our doing nothing there is the spec rather than an omission. - `raster.rs`: a CPU rasteriser that replays a command list onto a canvas. Not on the display path, no anti-aliasing, no fonts; it exists so compositing has a verifiable output. In pdf-graphics and not pdf-makepad because a test that needs a GPU is a test that does not run. - Golden **pixels** for shading, mesh, blend and overprint pages — Phase 7's exit criterion, which the Phase 2 command-text goldens cannot meet. ASCII grids with a colour legend, quantised to quarter steps; each test asserts its exact colours before comparing, so a wrong-but-stable render cannot be blessed by an UPDATE_GOLDEN run. Six mutations, all killed, including the two that describe the old behaviour: discarding the blend result, and ignoring the overprint flag. 1364 tests pass. ADR 0030.	2026-08-18 19:25:15 +00:00
andodeki	728fbc3ad0	fix(pdf): mesh shadings — three bugs in code that had no fixture ... ADR 0028 shipped types 4-7 and said honestly that they were unproven: the uncovered lines of `shading.rs` were exactly `parse_mesh`, "the position `image.rs` was in before ADR 0016 found the JPEG decoder was a stub". Writing the fixtures found three real bugs. - Type 5 has no per-vertex flag; `/VerticesPerRow` delimits it. Reading 8 phantom bits shifted every vertex after the first, decoding plausible coordinates that were entirely wrong. - Types 6 and 7 are patches: 12 or 16 control points carrying no colour, then four corner colours. The old loop read a colour per point, consumed three times too many components, ran off the stream, and the None-on-truncation path swallowed it as "the mesh ended". - A flag-0 triangle is three vertices whose second and third flags are ignored (§8.7.4.5.5). Acting on them cleared the strip every time and produced no triangles at all. Caught in new code, before it shipped. And one omission: `color_at_point` returned None for a mesh, so a mesh that parsed perfectly still painted nothing — indistinguishable from one that failed. `MeshTriangle::color_at` now interpolates the corner colours by barycentric coordinates, None outside, because black is a colour a mesh can legitimately produce. Shared-edge patches (flags 1-3) inherit the previous patch's edge rather than being read as fresh patches, which desynchronised the rest of the stream. Five corpus fixtures, generated from named coordinates and colours so every expected value in the tests is one the generator wrote deliberately. Eight tests, five mutations, all killed. Coons flattening is still an approximation and still reports `is_approximate`. ADR 0029.	2026-08-18 19:10:49 +00:00
andodeki	c9474e2c9f	feat(spreadsheet): dynamic-array spill model — FILTER, GROUPBY, PIVOTBY, A1# ... The engine stored every formula result as one display string per cell. This adds the dynamic-array architecture: a formula can return a grid, which "spills" into the cells below/right of its anchor. Value model: - `Value::Array(Vec<Vec<Value>>)` — a grid result. Scalars coerce to one-cell grids where the shape matters; `to_f64`/`to_bool` refuse an array, `to_display_string` shows the top-left, and `resolve_arg` flattens an array argument so `SUM(FILTER(...))` aggregates its cells. - Element-wise broadcasting: `resolve_array2d` maps a binary operator over a grid when one side is a scalar (or both grids share a shape), so `FILTER(A1:A4, C1:C4 > 15)` builds the boolean include the way Excel does. The binary-op logic was factored into `apply_binop`. Parser and AST: - `#` is now the spill operator: `A1#` and `Sheet2!A1#` parse as `SpillRef` / `SheetSpillRef`, evaluate to the anchored array (so `=A1#` re-spills), flatten in aggregates, and track their anchor in the dependency graph (intra- and cross-sheet). Functions (dynamic arrays): - FILTER(array, include, [if_empty]) — keep rows (column include) or columns (row include); `#N/A` on no match unless `if_empty`. - GROUPBY(row_fields, values, function, [field_headers]) — group rows by field tuples and aggregate each value column (SUM/AVERAGE/COUNT/ MAX/MIN/MEDIAN by name, ETA-reduced-LAMBDA form). - PIVOTBY(row_fields, col_fields, values, function) — a 2D pivot with the aggregate name in the top-left corner. Spill storage (data.rs): - `SpillRange` + `spills` map on `SpreadsheetData`: derived cells read back through `get_display_value`/`get_raw`/`get_edit_value`, are not blank, and are read-only — `set_cell`/`put_cell`/`remove_cell`/ `mutate_cell` refuse to touch them (the UI blocks via `is_spilled`). - Recalc builds the spill from the `Array` result (`apply_formula_result`) and drops stale spills when a formula becomes scalar, is removed, or cycles. Spills are derived state, never serialized — the anchor formula persists and re-derives on load. - Cross-sheet spills read through `get_sheet_spill_values`. Tests: 21 new units (FILTER/GROUPBY/PIVOTBY shapes, broadcasting, Value::Array methods, spill parsing) + 5 end-to-end tests (spill display, read-only cells, `A1#` aggregation and re-spill, stale-spill clearing, cross-sheet spill). Engine unit tests 405 -> 427; UI lib tests still pass. Engine coverage 96.66% (floor 96).	2026-08-18 18:34:22 +00:00
andodeki	a2b05c56c9	feat(makepad-table): opt-in capabilities feature, and raise the matrix_client defect ... The two caveats from the dependency investigation. ## The capabilities feature Camera and location attachments are now available behind `features = ["capabilities"]`, which pulls `nigig-uikit` and supplies `UikitAttachmentProvider`. Measured: 89 crates by default, 275 with the feature on. That cost is real and it is inherent, not packaging waste. `camera_widget` imports `send_geocode_request` and `request_map_tile` from `nigig-core`, both of which call `spawn_async` — the shared Tokio runtime — and the first makes an HTTPS call to Nominatim. A camera that geocodes needs an async runtime and an HTTP client; there is no lighter honest version. It is affordable because it is opt-in, and because any app enabling it already depends on `nigig-core`, so that app's own tree grows by nothing. Everything touching `nigig-uikit` is in one module, so the boundary is a file rather than `#[cfg]` scattered through the widget. The provider holds no widgets of its own: the host owns the `CameraWidget` already in its tree and this asks it to open, because a provider that instantiated a second camera would fight the first for the device. A second request while one is outstanding is refused rather than overwriting. The table turns that refusal into `AttachmentUnavailable`, so the user is told the camera is busy instead of watching their first request vanish. File picking is deliberately declined here — `robius-file-picker` already ships unconditionally and costs nothing, and two paths for one job is one too many. Two CI gates, both verified to fail when they should: the opt-in build must keep compiling, and the default build must pull none of `tokio`, `reqwest`, `hyper`, `clap`, `csv`, `image`, `nigig-uikit` or `nigig-core`. The second checks the resolved `cargo tree` rather than the manifest, because feature unification can switch an optional dependency on from a sibling crate. Tests 99 default, 105 with the feature. Both clippy-clean. ## The matrix_client defect Raised in REVIEWS/MATRIX_CLIENT_FEATURE_GATE.md rather than fixed. It is not my crate, nothing depends on the broken combination, and a blind fix could change behaviour someone relies on. `matrix_client` declares `native = ["dep:tokio", "dep:reqwest", "dep:rusqlite"]` but its source gates on `#[cfg(not(target_arch = "wasm32"))]`. Two switches for the same modules, so on a native target with the feature off the modules compile and their dependencies do not — 19 errors, 26 ungated uses across 7 files. There is no CI job for the crate, which is why it rotted unnoticed. The note corrects an overstatement I made while arguing for the trait hook. I said fixing this would unblock wasm. It would not: `matrix_client` already builds clean for wasm32 with `--no-default-features`, and `nigig-core` has 8 wasm errors of its own (`crate::platform::spawn` missing) that have nothing to do with it. The only broken combination is native-target-with-feature-off, which nothing builds. I also said earlier that `matrix_client` was heavy — it is a 7-dependency local crate, not matrix-sdk. That was wrong and it inflated the case for the trait hook; the note records the measured numbers instead.	2026-08-18 18:03:26 +00:00
andodeki	45efc74106	feat(spreadsheet): pivot and chart aggregates — IFS family, statistics, SUMPRODUCT, LARGE/SMALL/RANK ... Full GROUPBY/PIVOTBY need a dynamic-array "spill" model (a formula returning a grid), which this single-cell engine deliberately does not have. These are the single-cell building blocks that do the same work. Multi-criteria conditional aggregates (the "filter then aggregate" pivot core), resolved positionally so criteria ranges stay aligned: - SUMIFS(sum_range, criteria_range1, criteria1, ...) - AVERAGEIFS(avg_range, criteria_range1, criteria1, ...) (#DIV/0! on no match) - COUNTIFS(criteria_range1, criteria1, ...) - MAXIFS / MINIFS (0 on no match, like Excel) Mismatched range sizes are #VALUE!, not a silent misalignment. Chart statistics (over the flattened numeric arguments): - MEDIAN, MODE (ties keep the smallest value), and the sample/population STDEV / STDEVP / VAR / VARP. Sample forms divide by n-1 (#DIV/0! for a single value), population by n. Pivot/ranking helpers: - SUMPRODUCT(array1, [array2], ...) — the element-wise dot product; text counts as zero, errors propagate, mismatched sizes are #VALUE!. - LARGE / SMALL(array, k) — k-th largest/smallest; k out of range is the new #NUM! error. - RANK(value, array, [order]) — descending by default, ascending on any nonzero order, tied values share a rank (RANK.EQ). `FormulaError` gains `NumError` (`#NUM!`) for out-of-domain numeric arguments, rounding out the error surface after `Na` in the lookup tranche; it round-trips through display/parse and propagates from cached values. Tests: 10 unit tests (multi-criteria aggregation, statistics, dot products, top-N/ranking, argument/size errors) + an end-to-end test proving the dependency graph tracks every range and recalculates the pivot formulas when a source cell is edited. Engine unit tests 395 -> 405. Engine coverage 97.34% (floor 96).	2026-08-18 18:03:00 +00:00
andodeki	c1d1e67f3a	feat(pdf): shadings — the sh operator was parsed and thrown away ... ADR 0028, the first of Phase 7's eight bullets. content.rs contained `PdfOp::Shading(_name) => {}`. The operator was lexed, given its own variant, matched during interpretation, and discarded. A page whose background is a gradient rendered as nothing. Nothing caught it for the usual reason: a blank region is a legal thing for a page to contain, so "drew nothing" and "drew what was asked" are indistinguishable without an assertion naming the expected colour. The golden corpus had no shading page, so there was nothing to be wrong. Two of the three pieces already existed — function.rs evaluates the colour function and colorspace.rs converts it to RGB. What was missing was the geometry between them. Sampling rather than a gradient primitive: a PDF shading is defined by an arbitrary function, possibly a sampled table or a PostScript program, and neither reduces to a stop list without loss. A device with a native gradient can still recognise the two-stop case from the samples. "No colour here" is None, not black. Black is a colour a shading can legitimately produce, so returning it for "outside an unextended shading" would paint a rectangle the author never asked for and the caller could not tell the two apart. Types 1-5 exact. Coons and tensor patches are flattened to their corners, which loses the curvature, and is_approximate says so rather than leaving a caller to assume fidelity. An unknown type is refused by number: a mesh drawn as a flat fill is a plausible-looking wrong answer. paint_shading is a new trait method, so the compiler found every implementor. The Makepad renderer records the request in pending_shadings, mirroring pending_xobjects — it cannot resolve a /Shading resource because it does not own the page dictionary, and recording the request is what stops the operator vanishing a second time. That holds even for types we refuse, so a host can warn the user. Four mutations, all killed. The first — discarding sh again — fails three tests. Stated plainly and left unticked: the mesh path is written but NOT exercised by any real stream. shading.rs is at 68% and the uncovered part is exactly parse_mesh and triangulate. Mesh support should be treated as unproven, not working: the code runs and produces triangles, and nothing yet demonstrates they are the right triangles. That is the position image.rs was in before ADR 0016 found the JPEG decoder was a stub. The Phase 7 status line is a table from the start this time — one row per spec bullet, seven of them saying "not started". Per ADR 0021, written before the work rather than after it. pdf: 1321 passed (was 1291). pdf-ui: 1366. Coverage 87.60%, floors met.	2026-08-18 17:30:39 +00:00
andodeki	cb8912f762	test(pdf): close the two real coverage gaps in the signing module ... Asked to verify Phase 6 was complete *with test coverage*, I measured sign.rs per function rather than trusting the file-level 82%. Most of the apparent gap is error arms inside covered functions — llvm-cov attributes each `map_err` closure separately — but two things were genuinely untested, and one of them was not code that should exist. algorithm_name() was dead. It returned a &'static str describing the algorithm and nothing called it: `algorithm()` supersedes it, returns a type rather than a string, and is what the CMS writer actually uses. Deleted rather than tested, because a test would have preserved code whose only caller was the test. SigningError's Display impl was never exercised. These strings reach a user through a host application. ContentsTooSmall in particular must carry both numbers — a caller cannot raise the reservation without knowing by how much — and that is now driven through the real signing path with a 32-byte reservation rather than by constructing the error. sign.rs 82.07% -> 83.79%. pdf: 1291 passed. Coverage 88.03%, floors met.	2026-08-18 17:08:11 +00:00
andodeki	7737096858	refactor(makepad-table): adopt Robrix's image decode path ... Replaces the hand-rolled try-PNG-then-JPEG with `pageflipnav/src/utils.rs::load_png_or_jpg`, the pattern the Robrix-derived app in this repo already uses. Two things it does better: - It sniffs the header with `imghdr` and calls the matching loader directly, so a JPEG does not decode-and-fail as a PNG first on every cold cache. - It still falls back to trying both when the sniff names something unexpected or nothing at all. `imghdr` is not perfect, and a mislabelled file is more useful decoded than refused. `imghdr` has no transitive dependencies — it reads a header and names a format. It is already a dependency of `pageflipnav` at the same version. The upstream version logs the failure and dumps the bad bytes to disk. That is right for a chat client receiving untrusted media and wrong here: this runs from the draw path for every attached cell, so a broken file would log once per frame. The caller already caches the failure and draws a labelled chip naming the file, which tells the user more than a log line would. Tests 94 -> 99. Verified by removing the sniff and by removing the fallback; each fails the ordering test. `TextOrImage`, the other candidate for reuse, is referenced in `room_screen.rs` but not defined anywhere in this checkout — it is upstream Robrix only, so there was no baseline here to adopt.	2026-08-18 16:51:47 +00:00
andodeki	01ebeeb7fe	feat(makepad-table): real image rendering with a resize anchor, and per-row heights ... Two things: attached images are decoded and drawn rather than shown as a placeholder chip, and row heights become genuinely per-row. **Image rendering.** Decoding follows `pageflipnav/src/utils.rs`, the Robrix-derived app in this repo: try PNG, then JPEG, because a header sniff is not reliable enough to choose on its own. The decoded texture is cached per cell, and a cache entry of `None` records a file that could not be read so a broken path is attempted once rather than every frame — `draw_walk` runs at 60Hz and re-decoding a photo there would be the slowest thing in the widget by a wide margin. One `Image` widget repositioned per cell, matching `cell_editor` and `math_cell`, with the texture swapped from the cache. A pool would let several textures live at once but needs runtime template instantiation and a reuse policy; this is the same number of GPU uploads with far less machinery. On first successful decode the real pixel size is written back to the attachment, so the row is sized from the true aspect ratio instead of the placeholder guess. **The resize anchor.** A grab square at the image's bottom-right corner. Dragging it writes `ImageSizing::Fixed`, which pins the height so a later relayout cannot overrule what the user chose, and the row follows because `row_height_for` reads the same value. The floor is asserted at compile time against the anchor size: an image dragged smaller than its own grab handle could not be grabbed again, and the user would have to delete the attachment to recover it. The anchor is hit-tested before the cell, or dragging it would open the editor instead. Sizing lives on the attachment rather than in widget state, so it survives a column reorder along with the image. **Per-row heights.** `TableRow::height` holds a dragged override and `row_height_for` honours it. Item 5's row resize previously assigned `self.row_height`, which is table-wide — dragging one row's handle resized every row at once. `RowGeometry`, added with the attachments, now carries the consequence: rows below a resized one shift down. Tests 86 -> 94 (140 across the tree), all five crates clippy-clean. Verified by reintroducing four defects. One of those guards did not work first time and the gap was mine. Deleting the per-row override branch from `row_height_for` left the whole suite green: the tests checked that `TableRow::height` could be *stored*, and nothing checked it was ever *read*. Storing a value no one consults is exactly the shape of "the handle does nothing". `the_row_override_is_actually_consulted` now asserts the connection at both ends — that `row_height_for` reads `row.height`, and that the resize writes it rather than the table-wide field.	2026-08-18 15:19:36 +00:00
andodeki	3c751f18bd	feat(makepad-table): cell attachments and per-row heights (item 6) ... The last of the nine. Items 1-5, 7, 8 and 9 shipped in 1887b54 and bbdfe82. **Per-row heights.** Row positions were `index * row_height`, which is only correct while every row is the same. A cell holding an image is not, so `RowGeometry` now accumulates boundaries the way `ColumnGeometry` does, and hit-testing scans them instead of dividing — with unequal heights there is no divisor. Ten call sites moved over. **Attachments.** A long press on a cell opens its menu: copy, paste, clear, add image or PDF, take a photo, add location, remove. Cells stay `String`. An attachment is a side-table on `TableData` keyed by `(row, col)`, so a table without them costs nothing and still round-trips as text — every existing caller builds `TableData` from strings and none of them change. Those keys are positional, which is the part that bites: inserting a row or reordering a column has to move them too, or the data moves and the image stays behind. `shift_attachments_for_row_insert`, `_row_remove` and `_col_move` handle it, and `move_column` swaps rather than shifts because it is a swap. This is the class of bug that only appears once there is real content in the table, so it is tested directly rather than left to review. **Why a provider trait.** Camera and location live in `nigig-uikit`, which pulls `nigig-core` and with it tokio, reqwest, matrix-sdk, clap, image and csv. For a widget whose only dependency is `makepad-widgets`, that is the wrong trade. `CellAttachmentProvider` names the three capabilities and a host that already has them supplies them; the default implementation declines everything, and declining emits `AttachmentUnavailable` rather than leaving a menu entry that silently does nothing. File picking ships with the widget, because `robius-file-picker` is already a dependency of three crates here, works through `rfd` on desktop and the platform picker on Android, and carries none of that weight. Its callback runs off the UI thread, so results are parked in `PENDING_CELL_FILE` and drained on `Event::Signal`, the same shape the invoicer and the SMS bulk import already use. **What is drawn.** A labelled chip, not the image. Decoding a photo or rasterising a PDF page per frame belongs in a texture cache the host owns, and a rasteriser is not something this widget should carry. The chip reports what is attached and takes the space the row grew for it; a host wanting a thumbnail draws over the same rect. Tests 72 -> 86 (132 across the tree), all five crates clippy-clean. Verified by reintroducing four defects: attachments not following a column reorder, not following a row insert, row lookup dividing by a uniform height, and an image ignoring its aspect ratio.	2026-08-18 13:52:41 +00:00
andodeki	bbdfe823f8	feat(makepad-table): row gutter, header select/resize, long-press menus, one input model ... Items 1, 2, 3, 4, 5, 7 and 9 of the nine reported. Item 8 shipped separately in 1887b54; item 6 (cell attachments) is next and needs the trait hook agreed for camera and location. **One input model for mouse and touch (item 9).** The touch path was a parallel implementation with its own tracker, its own long-press timer and its own movement threshold, and the two had already drifted: a long press opened a menu under a finger and did nothing under a mouse. Both paths now share `PressTracker`, `handle_press_timers` and `dispatch_target_click`. Only gesture recognition differs, because a finger reports Start/Move/Stop with no tap count and no hover — double-tap is derived from the interval between taps, the way the CAD viewport derives its gestures from raw touches. A held press schedules its own frame with `new_next_frame`. Neither a mouse nor a finger emits events while held still, so a long press would otherwise only fire if the user happened to move. **Double-click to edit (item 3).** A single click now selects; the second click of a double-click edits. `DOUBLE_TAP_WINDOW` is deliberately shorter than `LONG_PRESS`, so a slow double tap cannot also register as a long press and both edit the cell and open the menu. **Long press opens header menus (item 4).** Previously a single click did, which left no gesture free for selection. **Header selection and resizing (item 5).** A click on a header outlines it and shows a grab handle — right edge for a column, bottom edge for a row. Dragging the handle resizes, with a full-length guide while the drag is live. The size is floored at `MIN_SIZE`, which is not cosmetic: a header dragged below the handle size cannot be grabbed again, so the column would be unrecoverable by dragging. **Row gutter (items 1 and 2).** A leading column numbers the rows and acts as the row header. It is not a data column — no entry in `columns`, so it cannot be reordered or dropped onto — and the numbers are derived from the index each frame rather than stored, so an insert or reorder cannot leave them stale. This replaces the old 16px handle strip, which sat inside the first data cell and stole clicks from it. **Every grid position is drawn (item 1).** The draw loop iterated each row's own `cells`, so a row shorter than the column list simply stopped: the remaining columns had no background, no border and nothing to click. It now iterates the column count and treats a missing entry as empty. The rightmost vertical divider is also drawn; the old range stopped one short and left the last column open. **Header renaming (item 7).** Reached from the header menu rather than bound directly to the long press, so one gesture does not mean two things. It reuses the same `cell_editor` as the cells, which means the colour pinning, caret placement and focus deferral fixed earlier all apply to it for free. Row headers are deliberately not renameable: a row's label is its position, and changing it would mean introducing a stored row title the data model does not have. Tests 63 -> 72 (118 across the tree), all five crates clippy-clean. Verified by reintroducing four defects: removing the resize floor, removing the self-scheduled frame, widening the double-tap window past the long press, and re-forking the touch threshold.	2026-08-18 13:18:31 +00:00
andodeki	1887b54efa	fix(makepad-table): repaint when the cell editor takes focus (item 8) ... The editing cell's text did not appear until the pointer moved. `begin_edit` cannot focus the editor directly. `set_key_focus` takes an `Area`, and the editor only has one once it has been drawn, so focus is deferred: `begin_edit` sets `needs_editor_focus` and the next `handle_event` calls `set_key_focus` on the now-valid area. That deferred step changed how the editor draws — the caret starts blinking and the focused colour states apply — but it never asked for another frame. The editor therefore kept painting its unfocused appearance until something unrelated triggered a redraw. Moving the mouse was that something, which is why the text appeared only after moving the pointer away. One `self.redraw(cx)` after focus is taken. Tests 62 -> 63; verified by removing the call, which fails the new test. This is item 8 of nine reported together. The other eight are new capability — a row-number gutter, header editing, resize handles, a cell context menu with attachments, and a touch path — and are being scoped separately rather than bundled into a bug fix.	2026-08-18 13:04:21 +00:00
andodeki	374af5ccad	feat(pdf): the five Phase 6 bullets the status line omitted ... ADR 0027. Asked whether Phase 6 was 100% complete, I checked the plan's bullets against the code instead of answering from the status line. Five were not implemented and the status line named none of them: detached/ATTACHED signatures /SubFilter hardcoded to adbe.pkcs7.detached PAdES basics ETSI.CAdES.detached was a string in a match external_signing_test.dart absent; SigningIdentity needs an in-memory key OCSP/CRL lookup CRL only; OCSP counted, never parsed Fulcio identity absent (optional in the plan) This is the second time. ADR 0021 recorded the same failure in Phase 4 and wrote the rule meant to prevent it — enumerate criteria from the plan text first, then mark each done or explicitly deferred. I wrote that rule and then produced another prose summary of what I had built. A summary written from the work cannot show what the work omitted. PAdES is a real profile, not a label. CAdES signs a set of signed attributes, one carrying the document digest, and the signature is over those attributes re-tagged as a SET (RFC 5652 5.4) rather than over the [0] IMPLICIT SEQUENCE they are carried in. Verification checks the messageDigest attribute against the document as well as verifying the attribute signature; without that, a signature over somebody else's digest would be accepted. /SubFilter now comes from the profile, so a document cannot claim CAdES while carrying plain PKCS#7. ExternalSigner is a trait: bytes in, signature out. A smartcard or KMS never hands out its key, so SigningIdentity could not represent one. SigningIdentity implements the trait rather than sitting beside it, so there is one signing path — a second path for hardware keys would be a second place the byte range could be computed differently. OCSP is decoded with the der crate already present rather than adding the ocsp crate for two fields. Revoked from any response beats Good from any other. Attached signatures are REFUSED, not deferred. Both attached profiles (adbe.pkcs7.sha1, adbe.x509.rsa_sha1) are SHA-1 based, and SHA-1 is broken for signatures. They are parsed so such documents can be read; they cannot be written, enforced by the absence of a SignatureProfile variant. Same decision as RC4 in ADR 0024. Recorded as refused rather than not-done, because "not done" invites someone to finish it. Four mutations, all killed first attempt: messageDigest not compared, CAdES verified against the wrong bytes, /SubFilter hardcoded again, OCSP revoked read as good. The status line is now the plan's own bullets in a table, one row per spec item, not prose. Two wrong status lines in the same direction is a pattern, and the fix is structural: a missing row is visible, a missing sentence is not. Four rows are left unticked — Fulcio, independent review, Acrobat interoperability, and signing a document that already has an AcroForm. qpdf accepts documents under both profiles. pdf: 1289 passed (was 1276). Coverage 87.96%.	2026-08-18 12:06:59 +00:00
andodeki	780e323674	refactor(spreadsheet-ui): headless formula-bar state machine, wired to the workspace ... The formula bar's state — formula text, target cell, dirty flag, and the "ignore the next change" latch — lived as five scattered fields plus inline logic inside workspace.rs, a `script_mod!` DSL file that no unit test can construct. That made the formula bar the one piece of the UI whose behaviour was untestable headlessly. Extract a `formula_bar` controller module (the same pattern as the earlier geometry.rs extraction) and wire the workspace to it: - `FormulaBar` owns text/target/dirty/latch with `sync_to_cell`, `on_user_input`, `insert_reference`, `take_commit`, and `sync_after_commit`. The workspace now only bridges it to the Makepad text input; the change/return/focus-loss/undo-redo handlers route through the controller unchanged in behaviour. - Point-and-click formula building (new, Excel-style): while the formula bar is focused, selecting a cell appends its reference instead of replacing the formula being edited. `reference_for(sheet, row, col)` and `quote_sheet_name` build `A1`, `Sheet2!A1`, or `'My Sheet'!A1` with Excel's quoting rules (bare identifier unquoted; spaces, punctuation or a leading digit quoted; embedded quotes doubled) — the machinery that makes the cross-sheet reference syntax buildable from the UI. - The coverage script now measures formula_bar.rs alongside the other controller modules. Tests: 11 new headless unit tests (quoting, reference construction, sync/latch/commit round trip, and insertion into empty/value/formula bars). UI lib tests 62 -> 73, all pass; ui-controllers coverage 98.74% (floor 96) with formula_bar.rs at ~98%.	2026-08-18 11:40:49 +00:00
andodeki	d0e7ede0c1	feat(spreadsheet): cross-sheet named ranges (Data!Total) ... Completes the cross-sheet reference feature with `Sheet!Name`, the one shape the previous tranche explicitly left out. Parser and AST: - `Sheet2!Total` and `'My Sheet'!Sales` parse as a new `Expr::SheetNamedRange { sheet, name }` node. In `parse_sheet_qualified_ref`, an identifier after `!` that is not a valid cell reference is treated as a named range; a cell reference wins when both readings are possible (`Sheet2!A1`), matching Excel. Evaluation: - `EvalContext` gains `get_sheet_named_range` (default `None`). `evaluate` resolves a `SheetNamedRange` to its range and returns the first cell in expression context, while `resolve_arg` expands it to every cell for aggregates — so `Data!Total` reads one cell and `SUM(Data!Total)` sums the whole range. An unknown name on a real sheet is `#NAME?`, and `DataEvalContext` looks the range up on the sibling sheet case-insensitively (or on the sheet itself, through the intra-sheet path). Dependencies: - A named-range reference is a coarse sheet-level dependency, because its bounds live on the target sheet. `SpreadsheetData` tracks `cross_sheet_named_refs` (cell -> sheet names), rebuilt by `rebuild_dependency_graphs` / `update_dependency_graph` alongside the cell-level `cross_sheet_refs`, and the workbook folds both into its sheet-index dependency map. Editing a cell inside the named range therefore recalculates the reading sheet. Tests: parser/evaluator units (incl. quoted names, cell-vs-named precedence, dependency extraction) and workbook end-to-end (SUM over a cross-sheet named range with propagation on edit, quoted names, and the #NAME? case). Engine unit tests 390 -> 395; UI lib tests still pass. Engine coverage 97.56% (floor 96).	2026-08-18 11:07:57 +00:00
andodeki	593cd8fee8	feat(spreadsheet): cross-sheet references (Sheet2!A1) ... The engine's dependency graph is per-sheet by design, so this was the structural change: a formula can now read a cell on another sheet, and edits to the source sheet recalculate the readers. Parser and AST: - New tokens: `Bang` (`!`) and `SheetName` (`'My Sheet'`, with `''` as an escaped quote). `!=` still tokenizes as not-equal. - New AST nodes: `SheetCellRef { sheet, cell }` and `SheetRange { sheet, range }`, parsed from `Sheet2!A1`, `Sheet2!A1:B2`, `'My Sheet'!B3`, before the cell-ref fallback (a bare `Sheet2` would otherwise parse as a bogus cell reference). - `evaluate` and `resolve_arg` resolve them through two new `EvalContext` hooks, `get_sheet_cell_value` / `get_sheet_range_values`, which default to `#REF!` in contexts without sibling sheets. Evaluation: - `DataEvalContext` gains a sibling-sheet view plus a shared cross-sheet cycle guard keyed by `(sheet, row, col)`. Reading a sibling routes to a child context pointed at that sibling; re-entering the same cell on the same sheet mid-evaluation reports `#CYCLE!`, and a reference back to the sheet being recalculated is caught through the guard. - `recalculate_all_with` / `evaluate_formula_with` accept the sibling view; the plain per-sheet entry points are unchanged. Recalculation and dependencies: - `SpreadsheetData` tracks `cross_sheet_refs` per cell (rebuilt by `rebuild_dependency_graphs` / `update_dependency_graph`), and the workbook flattens it into sheet-index edges. Editing a sheet recalculates — with sibling access — the transitive closure of sheets that read it, plus the sheet itself (its own formulas may read other sheets). Single-sheet edits with no cross-sheet references keep the fast incremental path. - `evaluate_all` clears computed values across sheets first, then runs one extra pass per sheet, so acyclic chains propagate and mutual cross-sheet cycles terminate with `#CYCLE!`. - Cross-sheet formulas survive save/load: deserialization runs a sibling-aware pass, and a missing sheet renders `#REF!`. Tests: parser/evaluator units (incl. quoted names, dependency extraction) and workbook end-to-end (read + propagation, a three-sheet chain, quoted names, missing sheet, save/load round trip, cycle termination). Engine unit tests 382 -> 390; UI lib tests still pass. Engine coverage 97.55% (floor 96).	2026-08-18 10:53:08 +00:00
andodeki	99aebc202a	fix(pdf): security review of the signing code — a forgery verified as valid ... ADR 0026. Both ADR 0024 and ADR 0025 said this code needed a security review before shipping. This is that review, done adversarially: for each way a signature could be defeated, a test that attempts it. It found a critical vulnerability in the code as shipped last turn. FINDING 1, critical, exploitable with no special access. Verification recovered the certificate and the signature by *scanning* the blob for DER-shaped bytes rather than decoding it. The signature was checked against certificates[0]; trust was checked against ANY certificate present. Two questions, two different certificates. So: the attacker signs a forgery with their own key the attacker appends the victim's trusted certificate to the blob signature_valid = true (their signature over their own content is real) chain_trusted = true (the victim's certificate is present) is_valid() = true Demonstrated before the fix, with the message "I hereby transfer everything to the attacker" verifying as valid. Fixed by decoding the ContentInfo/SignedData structure and finding the certificate the SignerInfo actually names, by issuer AND serial, then evaluating both the signature and the trust path against that one certificate. Trailing data now fails the decode instead of being ignored. The scanning functions are deleted, not left unused: dead code that once returned the wrong answer is an invitation to call it again. FINDING 2, moderate. signer_certificate() returned chain[0] unconditionally, so a chain whose first entry was not the signing key's certificate made the SignerInfo name the wrong one. Not a forgery route — the signature fails — but a UI showing "signed by <somebody trustworthy>" beside a failed check is its own kind of dangerous. Now it finds the entry whose public key matches the key doing the signing. FINDING 3, informational. digest_matches was hardcoded true under a comment claiming it was computed. Not exploitable, because is_valid() also requires signature_valid and the signature covers the bytes — but a field asserting an unperformed check is ADR 0017's pattern exactly. The four items ADR 0025 left unticked are closed: PKIX chain building, with each link's issuer signature verified. A name match alone is not a chain; anyone can put any name in a certificate. Pinning still short-circuits first. Stapled revocation from /DSS, offline only. Unknown is the default and a first-class answer: treating "no information" as "not revoked" is a claim a verifier cannot support. Signature appearances, with the claimed time labelled "Time claimed" because a self-declared /M carries no authority. One-call sign_document. Three things were wrong first: the /ByteRange placeholder was too narrow for real offsets so patching them moved every later byte; /Contents must be a hex string because a literal full of NULs needs escaping and changes length; and a signature dictionary nothing points at is invisible — the first version wrote one and the reader reported zero signatures over a correctly signed document. Four mutations, all killed — two only after strengthening the tests. My first smuggling test put the attacker's certificate first, where certificates[0] finds it anyway, so it passed with or without the issuer/serial match. Putting the TRUSTED certificate first is what distinguishes them, and writing that test is what exposed Finding 2. qpdf --check accepts the signed documents. pdf: 1276 passed. Coverage 87.98%. Left unticked, deliberately: an independent review by someone who did not write the code. This is a self-review; it found two real vulnerabilities, which is evidence the method works and not evidence that nothing remains. Also untested against Acrobat, which is stricter than the spec, and sign_document replaces rather than merges an existing AcroForm.	2026-08-18 10:39:20 +00:00
andodeki	2d7b48b72c	feat(spreadsheet): lookup functions — MATCH, INDEX, VLOOKUP, HLOOKUP, XLOOKUP ... The formula engine could compute over ranges but could not look a value up in one. This adds the Excel lookup family, plus the #N/A error they need to report "not found". New `FormulaError::Na`: - Renders as `#N/A`, parses back in `from_display`, and — a bonus fix — the recalc fast path now propagates a stored `#N/A` as an error instead of turning it into text. Functions (5): - MATCH(lookup_value, lookup_array, [match_type]) — 1-based position. Type 0 exact (case-insensitive text), 1 largest ≤ lookup, -1 smallest ≥ lookup. - INDEX(array, row_num, [col_num]) — cell at a 1-based position; a single index walks the array flat in row-major order. Out of range is #REF!. - VLOOKUP / HLOOKUP — exact or approximate (approximate takes the largest first-column/first-row value ≤ lookup, the sorted-table convention), col/row index out of range is #REF!. - XLOOKUP(lookup_value, lookup_array, return_array, [if_not_found], [match_mode], [search_mode]) — match modes 0 exact, -1 next-smaller, 1 next-larger, 2 wildcard (`*`/`?`, case-insensitive); search modes 1 first-to-last and -1 last-to-first; the `if_not_found` fallback is evaluated lazily, only when nothing matches. Binary search modes are rejected with a clear error rather than silently mishandled. Lookups index ranges by position, so they keep their arguments as AST nodes (a new `range_from_arg` resolves Range and NamedRange expressions) instead of flattening through the aggregate path. Tests: 9 new unit tests (exact/approximate/wildcard/search-direction/ error arms) + an end-to-end test proving the dependency graph tracks the lookup table and recalculates dependents when a table cell is edited. Engine unit tests 373 -> 382.	2026-08-18 10:13:51 +00:00
andodeki	383533da36	feat(email): email the trip report to the finance department ... build_report_email (pure, tested) attaches the report PDF as application/pdf in a multipart message to a comma-separated finance recipient list. spawn_email_trip_report fetches the inbox, extracts trip receipts, builds the report, and emails it via the signed-in SMTP account; the proxy backend reports 'attachments unsupported' honestly rather than failing silently. The Finance card gains a recipients field and an 'Email report to finance' button. An end-to-end test sends the attached PDF through the SMTP sink and asserts the recipient, application/pdf type and filename land in DATA. Domain tests 234 -> 237.	2026-08-18 10:07:54 +00:00
andodeki	26f6d431fb	feat(spreadsheet): date and time functions, with a date display format ... The formula engine had no notion of dates. This adds an Excel-style date/time model and the functions to work with it. Date model (new `dates` module): - A date/time is a single f64: the integer part is a day serial, the fraction is the time of day. Serial 25569 = 1970-01-01, so every modern date agrees with Excel exactly. The calendar is the proleptic Gregorian (Howard Hinnant's days_from_civil/civil_from_days), so Excel's phantom 1900-02-29 (serial 60) reads back as 1900-02-28 and serial 61 = 1900-03-01 — documented rather than reproduced. - Serial <-> calendar conversion, day-of-week, leap-year and days-in-month helpers, date/time string parsing, EDATE/EOMONTH, DATEDIF(Y/M/D), and ISO formatting. Functions (17): - DATE, DATEVALUE, YEAR, MONTH, DAY, HOUR, MINUTE, SECOND, TIME, TIMEVALUE, WEEKDAY (return types 1/2/3), DAYS, EDATE, EOMONTH, DATEDIF — with Excel's month/day rollover in DATE, day clamping in EDATE, and #VALUE! for malformed strings and unknown units. - TODAY and NOW read a wall clock. The engine stays deterministic: `EvalContext` gains a default-none `now_serial` hook, and `SpreadsheetData` carries an optional `now_serial` (never serialized). Without a clock they report "requires a wall clock"; `SpreadsheetData::set_system_now` / `Workbook::set_system_now` supply the system clock, and the UI workspace model wires it on creation. Display: - `NumberFormat::Date` and `NumberFormat::DateTime` render a serial as `YYYY-MM-DD` / `YYYY-MM-DD HH:MM:SS` through write_display_value, with codes that round-trip through the existing serialization. Tests: 18 new unit tests (calendar round-trips across centuries, known serials, leap-year rules, parsing, weekday schemes, EDATE/EOMONTH clamping, DATEDIF, ISO formatting) + 6 evaluator tests + an end-to-end test covering format rendering and recalc through the dependency graph. Engine unit tests 352 -> 373. UI lib tests still 62 pass with the new clock wiring.	2026-08-18 10:00:53 +00:00
andodeki	9a5ce9c0e6	feat(pdf): signing and verification — Valid becomes reachable, with a policy ... ADR 0025, completing Phase 6's functional core. This partially reverses ADR 0010, which refused signing and cryptographic verification outright, and it reverses only the half whose justification expired. ADR 0010 gave two reasons. The first — a parsing library has no business signing — stopped being true when Phase 4 began creating documents and Phase 5 editing them. The second is still true and is preserved intact: deciding which certificate authorities to trust is a policy decision that belongs to the host, not to a parsing library So VerificationStatus::Valid is still not reachable by default. Verification returns three independent booleans and is_valid() needs all three; the third, chain_trusted, can only become true through a caller-supplied TrustAnchors. There is no TrustAnchors::system(), no bundled root store, no Default that trusts anything. A caller with no policy is told "cryptographically intact, signed by somebody you have not said you trust" — a different fact from "forged", and a host that cannot tell them apart shows the wrong thing to a user. RSA PKCS#1 v1.5, ECDSA P-256 and Ed25519, all with SHA-256. PSS is stronger and not universally accepted by PDF verifiers, so v1.5 is what is written. Ed25519 carries an interoperability caveat in the doc comment on the variant itself, because that is where someone choosing it will read it: ISO 32000-2 does not list it and most desktop viewers will reject it. No network. Revocation is not implemented rather than smuggled in: the engine crates are CI-gated against reaching outward, and that gate is a rule about layering, not an obstacle to work around. Every test generates a real key and a real certificate at run time. Nothing asserts against a checked-in blob — a fixed expectation only proves the code still does what it did, which is the wrong question for a signature. The tampering tests assert the signature verifies FIRST, then flip a bit; without that half they could pass by never verifying anything. Four mutations, all killed. The one that matters is the first: making an empty anchor set confer trust is exactly the regression that would turn this back into the thing ADR 0010 refused, and it fails immediately. Two bugs the tests found: UTCTime cannot encode a year past 2049 (RFC 5280 4.1.2.5.1). The first fixture used a 2096 expiry and every certificate failed to encode. The certificate scanner assumed a two-byte DER length. RSA certificates are large enough to use that form, so RSA and P-256 passed while Ed25519 found no certificate at all — its certificate is small enough for the short form. A scanner tested only against the largest input fails silently on the smallest. 72 dependency packages pulled in, zero non-compliant licences, no C. Stated plainly and left unticked in the ADR: chain_trusted is anchor identity matching, not PKIX path building. Correct for certificate pinning, a false negative for a real CA hierarchy. Also outstanding: revocation, signature appearance generation, and one-call incremental signing. pdf: 1247 passed. Coverage 88.08%, floors met.	2026-08-18 09:45:01 +00:00
andodeki	b5ff5dcf40	feat(spreadsheet): text manipulation and IS* info functions ... The formula engine could count, sum, compare and test conditions, but had almost no way to work with text (only CONCAT/LEN/UPPER/LOWER) and no way to ask about a value's type. This adds both. Text functions (operate on the display form of their arguments): - TRIM — collapse internal space runs and drop leading/trailing spaces - LEFT / RIGHT — first/last n characters (default 1) - MID — n characters from a 1-based start - SUBSTITUTE — replace all occurrences, or just the nth instance - FIND / SEARCH — 1-based position, case-sensitive vs case-insensitive, #VALUE! when not found or start is out of range - REPT — repeat n times, capped at Excel's 32767-character result - PROPER — title-case each word Info functions (never propagate their argument's error, like Excel — ISERROR reports it, the others treat it as FALSE): - ISNUMBER / ISTEXT / ISNONTEXT / ISLOGICAL / ISERROR - ISBLANK — TRUE only for an absent cell. This needs the distinction between "missing" and "holds 0", so EvalContext gains a `cell_is_blank` method; DataEvalContext overrides it with a direct cells lookup (an absent cell reads as Number(0.0) through get_cell_value, but is blank, whereas a real 0 is not). Dependencies flow through the existing AST walk, so a TRIM/LEFT/etc. reference is tracked and recalculates when its source cell is edited — pinned by an end-to-end test through SpreadsheetData. Engine unit tests 345 -> 352.	2026-08-18 09:35:19 +00:00
andodeki	b93dc485b9	test(spreadsheet): cover public workbook serialization round trip	2026-08-18 08:31:17 +00:00
andodeki	b7eacb2a94	test(spreadsheet): cover public multi-sheet evaluation	2026-08-18 08:27:13 +00:00
andodeki	4deefabd0a	test(spreadsheet): cover public style commands	2026-08-18 08:24:09 +00:00
andodeki	a099ab9980	test(spreadsheet): cover public workbook lifecycle API	2026-08-18 08:02:17 +00:00
andodeki	2824b49f0e	test(spreadsheet): cover public workbook deserialization API	2026-08-18 07:44:23 +00:00
andodeki	1629994de7	test(spreadsheet): add public persistence integration test	2026-08-18 07:30:43 +00:00
andodeki	d4e3e9a443	feat(pdf): encryption on save — AES-128 and AES-256 (Phase 6, part one) ... ADR 0024. This reverses ADR 0005's "never write encryption", and the reason it is safe to reverse is that the facts changed underneath it. A crate that only reads cannot produce weak ciphertext, so refusing to write any was free. Now that Phase 4 creates documents and Phase 5 edits them, the refusal does something worse than protect nobody: open a password-protected file, change one annotation, save, and the output is plaintext. No error, no warning — the protection is silently dropped. That is this project's recurring failure mode in the one place where the consequence is a breach. The principle survives in a narrower form: no hand-rolled crypto, and no weak cipher offered as an option. RC4 stays readable because files use it and is not writable — EncryptionAlgorithm has no RC4 variant, so the refusal is a type, not a runtime check someone can route around. The encryptor is the literal inverse of the decryptor and imports its primitives rather than restating them; two implementations of one algorithm drift, and here they drift towards "decrypts to garbage". Every unit test round-trips through the existing Decryptor. Encryption sits at one choke point: PdfWriter holds the Encryptor and write_object_at encrypts everything passing through. Not per call site — there are twenty-two of those in PdfDocBuilder, and one stream written in the clear inside an encrypted document is not a partial failure, it is a leak that no reader will report because the file is otherwise valid. The /Encrypt dictionary is the single deliberate exemption: it holds the salts a reader needs before it has a key, so encrypting it bricks the file. Verified against implementations we share no code with, now gated in CI: ok qpdf opens it with the password ok it really is AES-256 ok the wrong password is refused ok poppler decrypts the content ok no plaintext in the encrypted file Four mutations, all killed — two only after the tests were strengthened, and both misses are the interesting part: A fixed IV survived two_saves_of_one_document_are_not_byte_identical, because the AES-256 file key is fresh per save and that alone makes the output differ. The property actually needed is narrower: one encryptor, identical plaintext, different bytes. In CBC a repeated IV under one key leaks that two plaintexts are equal. A wrong /Length survived because our own reader recovers by scanning for endstream — a robustness fix from ADR 0023. An independent reader that trusts /Length reads a truncated stream and decrypts garbage. A lenient reader hides a broken writer, which is why the external gate exists. The /Length test itself had a bug first: it searched a from_utf8_lossy view and reported a stream declaring 80 bytes holding 156. Ciphertext is not UTF-8; the replacement characters shifted every offset. Unencrypted output stays byte-reproducible; encrypted output cannot be, and a test asserts that loss rather than leaving it implicit. pdf: 1220 passed (was 1187). pdf-ui: green. Coverage 88.21%, encrypt_write.rs at 96.5%. Signing is NOT started. It needs the trust-anchor decision ADR 0010 deferred: VerificationStatus::Valid is unreachable by construction, and making sign -> verify pass is a policy change, not an implementation detail. The plan's Phase 6 status now says so.	2026-08-18 07:27:45 +00:00
andodeki	118fbefe9a	test(spreadsheet): move format detection test to integration suite	2026-08-18 07:07:12 +00:00
nigig-ci	ee8d10d978	fix(pay): the M-Pesa PIN field has been visible by default since 69f6fb2 ... The first thing the newly registered runner found. tools/check-no-pin-capture.sh fails on main: FAIL: pin_input is not hidden by default in the DSL (review item 0.3: hiding must survive a DSL reload) Reproduced locally, so this is a real defect and not runner flakiness. 69f6fb2 -- "fix(map): NigigMapView packed vertex shader for new DrawVector; fix pay sheet visible" -- deleted TWO lines from shared_pay_sheet.rs. Its message says it removed `visible: false` from `pin_eye_btn := Button` because "Button does not have DSL property visible". Whatever the merit of that for the Button, the same commit silently took the line off `pin_input` as well, and pin_input is a RobrixTextInput, which does support the property -- 6f05c47 had added it there deliberately eight days earlier for exactly this reason. Consequence: both M-Pesa PIN controls have rendered by default in every non-demo build since. The runtime code only ever calls set_visible(cx, true), and only under #[cfg(feature = "demo")] -- nothing hides them -- so the DSL was the entire mechanism. The comment three lines above still read "The DSL hides the PIN controls by default so a reload cannot surface them", which had become false. That is review item 0.3 / defect B11: the hiding must survive a DSL reload, because a hot-reloaded or re-instantiated sheet re-applies the definition and a runtime-only call does not run again. Restored on both controls. On the Button: the stated reason for removing it does not hold in this tree -- nigig-build's cad/mod.rs has three Buttons carrying `visible: false` in the DSL (workspace_split_axis_btn, desktop_workspace_sync_toggle_btn, ai_cancel_button) and they do not warn. Verified `cargo check -p nigig-pay-ui --lib` is clean with both lines back. Also hid the parent `pin_visibility_row`, so the container and its children agree and a future edit to one child cannot re-expose the field on its own. tools/check-no-pin-capture.sh now passes end to end: PIN controls are hidden by default in the UI definition no PIN capture in a packaging build; the default retains it deliberately Worth stating plainly: this shipped because a map shader commit touched a payments file and no CI ran. The gate that catches it has existed the whole time.	2026-08-18 07:05:04 +00:00
andodeki	676b47087a	refactor(spreadsheet-ui): centralize dirty region state	2026-08-18 05:49:55 +00:00
andodeki	f75c1cc966	feat(spreadsheet-ui): model dirty render regions	2026-08-18 05:41:42 +00:00
andodeki	2ba1837055	fix(pdf): main was red — three clippy errors broke the engine build ... The PDF engine did not compile under `-D warnings`, which is what CI's engine job runs, so that job could not have passed on any of the last eleven PDF commits. The tests themselves were fine (1187 passing); the build was not. Two lints in the new jpx.rs, one in tests/filters.rs. One root cause each: jpx.rs:1279,1290 needless_range_loop on the inverse component transform. The lint's suggestion does not work here: each pass reads and writes three component planes at the same index, and `components.iter_mut()` cannot express three simultaneous mutable borrows of one Vec. Allowed locally with the reason written down, rather than restructuring correct code to satisfy a lint that has misread it. filters.rs:383 vec_init_then_push, where the lint is simply right. No behaviour change. Verified after the fix, on a clean checkout of df3c650: TEST_TARGET=pdf 1187 passed TEST_TARGET=pdf-ui 1232 passed coverage 87.98%, all floors met corpus matches generate.py; golden expectations unchanged fuzz manifest gate, no-makepad and no-process gates all pass	2026-08-18 05:41:22 +00:00
andodeki	ee81d292ed	test(spreadsheet): cover literal and comparison formula edges	2026-08-18 05:22:48 +00:00
andodeki	0fcb2d3fae	test(spreadsheet): cover sum boolean text error branches	2026-08-17 19:44:27 +00:00
andodeki	dffa140123	fix(makepad-table): measure text with the layouter instead of estimating it ... Right-aligned text still overflowed its column after the previous fix, because that fix kept the 7px-per-character estimate and only clamped the result. Real glyphs at this size average wider than 7px, so the estimate came out short, `pos.x + width - pad - estimated_width` placed the run too far right, and it ran past the cell edge. The clamp only guards the left side. No fixed per-character figure can work here: under-measuring overflows and over-measuring leaves a visible gap. `draw_cells` now measures with the same layouter that draws the run — `DrawText::layout(..).size_in_lpxs.width`, the pattern `glass_panel.rs` uses — and both the truncation and the alignment use that measurement, so the two cannot disagree. `align_text_x` takes a width rather than a string. `fit_text_to_cell` becomes `fit_text_measured`, taking a measuring closure and bisecting for the longest prefix that fits; laying out a string is not free, and a long value in a wide column would otherwise be measured once per character every frame. Tests 59 -> 62, and the existing ones were rewritten around an injected measurer. `varied()` gives different characters different widths, as a real font does, so the suite now fails on anything that assumes a constant width. Verified against four defects. Three of the guards did not work on the first attempt, and all three failures were mine: - **Estimating the alignment width — the actual reported bug — passed.** The source check asserted `size_in_lpxs` appeared *somewhere* in `draw_cells`, and the fitting call still mentioned it after the aligning call had been replaced with an estimate. It now counts both measurements and rejects any `chars().count() as f64 *` in the draw path. - **Removing the clamp passed.** Every test reached `align_text_x` through `fit_text_measured`, and once text has been shortened to fit, the clamp never fires. `alignment_clamps_a_run_wider_than_its_cell` calls it directly with an over-wide value. The clamp still earns its place: the fitted width and the aligned width are separate measurements of separate strings, and any disagreement is what it catches. - **An off-by-one in the bisection hung instead of failing.** `lo = mid - 1` stops the interval shrinking and the loop spins forever — a frozen frame, not a wrong pixel, and no assertion catches it without a timeout. The loop is now a bounded `for` capped at the number of steps a correct bisection can need, so the same mistake produces a wrong answer that a test can see. `the_fit_search_terminates_on_hostile_input` covers degenerate measurers.	2026-08-17 12:31:43 +00:00
andodeki	b870dc4c69	feat(pdf): outline, page label and struct-tree editing — Phase 5 complete ... The last functional item. `catalog.rs` read all three; nothing could write them into an existing document. `PdfDocBuilder` can emit an outline when *creating* a file, but a document already on disk could not have its bookmarks changed. An outline is a doubly-linked tree — `/First`, `/Last`, `/Next`, `/Prev`, `/Parent` and a signed `/Count` — and every pointer has to agree. A viewer walking `/Next` and one walking `/First`..`/Last` must see the same list, or bookmarks vanish in one reader and not another with no error anywhere. Object numbers are reserved before any dictionary is built, because each item names its parent, its siblings and its children. `/Count` is signed and that matters: positive means open and counts *visible* descendants, negative means closed. A closed child contributes itself but hides its own children. Writing the total unconditionally makes every node render expanded. Page labels are a number tree, so the keys are sorted before writing and two rules starting on the same page are refused — that page's label would be undefined, and picking one arbitrarily is worse than saying so. Struct-tree editing is deliberately **removal only**. Editing the tree in place means rewriting `/K` arrays whose entries are marked-content ids inside page content streams; the tree and the content must stay in step, and changing one without the other produces a document whose accessibility information describes content that is no longer there. Removal is honest — the document stops claiming to be tagged — and `/MarkInfo` goes with it, because `/Marked true` with no tree tells a screen reader there is structure to find. Verified by mutation, seven defects, all caught: /Prev never written 1 fail /Next never written 5 fail /Count always positive 1 fail page validation skipped 2 fail /MarkInfo left behind 1 fail children not linked via /First 2 fail label rules not sorted 1 fail The last one needed a new test. Our reader walks `/Nums` linearly, so it tolerates any order and the round-trip passed unsorted — but a conforming reader binary-searches it and would label pages arbitrarily. Only reading the raw array catches that, which is the same lesson as the stale `/Count` in the page-ops tranche: our parser's tolerance hides defects that harm other readers. Engine suite 1158 -> 1187. External readers still pass. **Phase 5 is complete** but for the `ui.rs` interaction tests, blocked on the same missing Makepad headless backend as Phase 4's. The plan records the item-by-item status and, separately, the six defects the round-trip tests found in code that already existed — an unordered dictionary writer that made every generated PDF differ run to run, a short /Length that silently truncated streams, two readers disagreeing by a byte, a nested paren that truncated a string and desynchronised the stream, undecoded # escapes in names, and unknown operators being dropped outright.	2026-08-17 12:26:29 +00:00
andodeki	41c43df0e5	feat(pdf): redaction and object compaction — and three reader defects ... Phase 5's last two functional items. Together they are what makes a redaction real, which is why they are one commit: redaction removes the content, compaction removes the revision that still holds it. **Redaction removes operators; it does not draw rectangles.** The famous failure is painting black over text and shipping it — the text is still there, and `pdftotext` prints it. This module draws nothing. It removes the text-showing operators whose position falls inside a rectangle, and the test that matters is that the text can no longer be extracted. Positioning needs the text matrix, so the module tracks `Tm`/`Td`/`TD`/`T*` and the CTM through `q`/`Q`/`cm`. It cannot reach the graphics layer — the crate boundary again — so it treats a showing operator's origin as its position and removes the whole run. That is coarse in the *safe* direction: removing more than asked loses content the user can see is missing; removing less leaves the secret in the file. What it refuses to claim is as important. Images are removed entirely rather than cropped. Metadata and attachments are untouched. And an incremental redaction leaves the original text in the earlier revision — the report says so via `earlier_revisions_retain_content` rather than implying the job is done. **Compaction finishes it.** The output is built from the object graph reachable from `/Root`, so dead objects, superseded revisions and the bytes behind a redaction are not copied — they are simply never written. A signed document is refused unless `allow_signed` is set, because compaction destroys the revision a signature covers and would leave every signature unverifiable with no warning. The end-to-end test is the point: redact, compact, then search the output bytes for the secret. It is gone. **Three reader defects, all found by writing the tests.** - **`PdfWriter` wrote dictionary keys unordered.** `PdfDict` is a HashMap and Rust seeds its hasher per process, so *every generated PDF differed run to run*. Found by compaction's idempotence test — compacting an already-compact file produced the same objects at the same offsets with their keys shuffled. Verified fixed by running four separate processes and getting a byte-identical file. Same defect as the one fixed in `content_edit::write_dict`; this one affected every file this codebase has ever written. - **A short `/Length` silently truncated a stream.** The reader guarded against a `/Length` running past the buffer but trusted one that was too small, cutting the stream at the wrong place and losing the rest with no error. Short lengths are common in hand-edited files. `endstream` is now the authority when the two disagree — but only when it is *further* on, so binary data containing the word `endstream` is still bounded by its declared length. - **Two stream readers disagreed by one byte.** `read_object_at` did not trim the EOL before `endstream` while `find_endstream` did, so a write-read-write cycle grew every stream by a newline. A test fixture had encoded the bug: it declared `/Length 9` for eight bytes of content and asserted the newline came back as data. Both corrected — the newline is syntax (§7.3.8.1), not content. Verified by mutation. Ten defects across the two modules, all caught: redaction covers instead of removes 16 fail CTM ignored 1 fail Q does not restore the CTM 1 fail operands kept when operator removed 12 fail revision warning always false 1 fail signature guard removed 1 fail reachability keeps everything 2 fail dropped reference left dangling 1 fail unresolvable object kept as reachable 1 fail writer dictionary order unsorted 1 fail short-/Length fix reverted 1 fail /Length not rewritten on compaction 1 fail One mutation survived and deleted code rather than adding a test: a `continue` skipping `/Length` in the compaction loop was dead, because the `set` after the loop overwrites it either way. Removed rather than left as untested defence with a reassuring comment — the same call ADR 0017 made about the visited-set guard. A second mutation moved a test rather than a fixture: a stale `/Length` can no longer reach `renumber` through a file, because the reader now repairs it first, so that branch is tested directly instead. Engine suite 1108 -> 1158. External readers still pass. Phase 5 remaining: outline, page label and struct-tree editing.	2026-08-17 12:20:25 +00:00
andodeki	b7eb271a0d	feat(spreadsheet): logical and conditional formula functions ... The formula engine could sum, average and do single-cell math, but had no way to combine conditions or aggregate selectively — no `=IF(AND(...))`, no `=SUMIF(...)`. This closes that gap with seven Excel-compatible functions. Logical (evaluated lazily, like IF, so they short-circuit): - `AND(a, b, ...)` — TRUE iff every argument coerces to TRUE; ranges flatten to their cells. Stops at the first FALSE, so `AND(FALSE, 1/0)` is FALSE rather than `#DIV/0!`. - `OR(a, b, ...)` — TRUE iff any argument is TRUE, short-circuiting on the first TRUE. - `NOT(x)` — logical negation of the single argument. - `IFERROR(value, fallback)` — `value` unless it errors, in which case the fallback is evaluated and returned (lazily). Conditional aggregates (criteria-matched by position): - `COUNTIF(range, criteria)` — count of matching cells. - `SUMIF(range, criteria[, sum_range])` — sum of `sum_range` (or `range`) cells whose position matches; text in the summed region is skipped, errors propagate. - `AVERAGEIF(range, criteria[, average_range])` — mean of the matched cells, `#DIV/0!` when nothing matches. Criteria accept numbers, comparison operators (`>5`, `>=5`, `<5`, `<=5`, `<>5`, `=5`), case-insensitive text (`"apple"`, `=apple`, `<>apple`), and cell references holding any of those. Wildcards are not supported. Dependencies flow through the existing AST walk, so a SUMIF's range and criteria cell are tracked by the dependency graph and the formula recalculates when an input is edited — pinned by an end-to-end test through SpreadsheetData. Engine unit tests 331 -> 343.	2026-08-17 12:19:57 +00:00
andodeki	e1d1346b27	fix(mpesa): parse SMS from in-memory messages, not serde-skipped cache ... OfflineSmsMessage.body has #[serde(skip)] so it round-trips as empty. scan_sms was upserting to the offline store then loading back and parsing from the empty body, which always fails. Parse directly from the in-memory list_messages() result instead.	2026-08-17 15:13:33 +03:00
andodeki	70bbff7ecb	fix(cad): the nav pad's zoom buttons were a pixel from their own hit zone ... First test written against the widget layer, and it found something on the way in. The viewport's navigation pad — fit, four pans, zoom in, zoom out — had its layout written twice. `viewport_render.rs` drew each button at `col * (BTN_W + GAP)`. `viewport_input.rs` decided what a click hit with hand-written arithmetic inline in a 630-line event handler: `BTN_W * 3.5 + GAP * 3`. Those agree for whole-numbered columns and disagree at the half column the zoom pair sits in: 3.5 * 24 = 84 drawn, 22 * 3.5 + 2 * 3 = 83 hit-tested. The zoom buttons' clickable area sat one pixel left of the buttons, so their right-hand pixel column did nothing and a pixel of empty space beside them zoomed. `PanRight` was 2px short at its right edge for the same reason. One pixel is not much on its own. The mechanism is what matters, and it is the third instance of it in this module: two copies of one piece of geometry, free to drift, with nothing able to notice. The camera-to-world pair was the first, the scene-cache benchmarks the second. Both callers now read `nav_pad::LAYOUT`. The renderer iterates it; the hit test tests against it; the offsets come from one function. That also turns 88 lines of inline conditionals in the event handler into 32 lines of match, which is a readability win I would not have bothered with on its own. The bounds are now the drawn rectangle exactly — half-open, BTN_W by BTN_H, gaps dead. The old hit zones were 2px larger than the buttons in several places. Being strict is deliberate: a hit area larger than its button is indistinguishable from a misaligned one the next time something looks wrong. 7 tests, 100% of the new module. The one that matters is `drawn_and_hit_zones_agree`: every drawn rectangle must hit-test to its own button at all four corners and the centre. That test fails on the old code, which is the only reason to trust it. Verified with a real compiler, which this environment turns out to have: 1051 lib tests pass (7 new), cad_integration 154 pass, cargo fmt clean, engine coverage 97.16% with every floor met including nav_pad at 100%.	2026-08-17 12:12:34 +00:00
andodeki	074066a382	feat(email): export the trip report from the inbox ... spawn_export_trip_report fetches the inbox (shared fetch_inbox_messages helper), extracts trip receipts, builds the report, and writes trip-expense-report.pdf into app-data; it posts TripReportExported with the path and a summary. The More page gains a Finance card with an 'Export trip report (PDF)' button and a status line.	2026-08-17 12:08:19 +00:00
andodeki	e0d86274d8	feat(pdf): flatten annotations and form fields into page content ... Phase 5's `flatten_test.dart`. An annotation draws from its /AP /N stream, which lives beside the page rather than in it; flattening moves that appearance into the page's own content and removes the annotation, so what is drawn is part of the page and cannot be turned off, edited or extracted as a field. That is what "finalise this form" and "make these comments permanent" mean, and it is irreversible by design. The placement transform is the whole problem, and it is §12.5.5: transform the /BBox by /Matrix, take the bounding box of the *result*, then fit that onto /Rect. Skip a step and the stamp lands at the origin, or in the right place at the wrong size, and the page still renders. A rotated appearance is the case that exposes it — rotation swaps the transformed box's width and height, so fitting the untransformed box squashes it. What is refused matters as much as what is done: - **No appearance stream**: left in place and reported. Dropping it loses it; inventing an appearance draws something the producer never specified. - **Hidden or /NoView**: not drawn on screen, so burning it in would *add* ink the user never saw. - **A /Popup**: the pop-up window of another annotation, never drawn on the page itself. Appearances are painted as XObjects rather than having their operators spliced in. Splicing needs the stream's resources merged into the page's with every name collision renamed, and it loses the /BBox clip an XObject applies for free. `pdf-document` cannot depend on `pdf-graphics` — the crate boundary is cos -> document -> graphics and inverting it to reuse `write_ops` would be a far worse trade than emitting the four operators (`q`, `cm`, `Do`, `Q`) directly. The number formatting follows the same shortest-exact rule as `content_edit::write_real`, and for the same reason. Verified by mutation, five defects, each confirmed red: placement matrix ignored 1 fail /BBox not transformed first 2 fail hidden check removed 1 fail annotation kept after flattening 7 fail existing page content dropped 1 fail **Externally verified, and it found a real gap.** Flattening the sample's seven annotations passed `qpdf --check` and kept every text run — but poppler still reported `Form: AcroForm` on a document with no fields left, because the catalogue entry survived. A viewer may still offer to fill in a form that no longer exists. `remove_acroform_if_empty` drops it, but only when *no* widget survives anywhere: flattening one page of a three-page form must not strip the fields still live on the others. before: Form: AcroForm after: Form: none `flatten_document` is the whole-document entry point — every page, then the form entry — and re-parses between pages because each flatten appends a revision the next must read. 22 round-trip tests through the saved file, including that flattening twice is idempotent (a Do count that grows on every save is how a "flatten" button pressed twice doubles every stamp), that existing page resources survive, and that a /AP /N state dictionary resolves through /AS. Engine suite 1075 -> 1108. Remaining in Phase 5: object compaction, redaction, and outline, page label and struct-tree editing.	2026-08-17 12:03:59 +00:00
andodeki	8ca5070b26	test(spreadsheet): cover the remaining serialization and border branches ... The last reachable lines in data.rs, all in the persistence layer and one style command: - serialize/deserialize round-trip for named ranges (the NAME block line), text colour, and an unknown block tag (ignored for forward compatibility), plus a malformed NAME line inserting nothing. - The legacy CSV deserializer's `|B` bold and `|F` formula metadata segments. - apply_command with BorderTarget::None clearing all four edges (the "remove borders" action), the complement of the per-edge arm the existing test covers. - A large-range self-reference reporting CycleDetected (pins the fix in the previous commit). data.rs 97.91% -> 99.49%; engine total 98.50% -> 99.13%. Unit tests 325 -> 331. Deliberately uncovered, as documented: the B17 invariant's debug_assert/#ERROR! patch (only reachable on a dep-graph bug), the topological-sort underflow guard, the let-else continue after a cell disappears mid-iteration, and the `}` attribution regions after unconditional returns.	2026-08-17 11:49:00 +00:00
andodeki	e1dcbefda3	fix(spreadsheet): large-range cycle detection must report, not zero ... The large-range fast path in DataEvalContext::get_range_values (used for ranges over 64 cells) handled a re-entrant formula cell — a reference cycle — by silently pushing 0.0. The small-range path in get_cell_value reports FormulaError::CycleDetected for the same situation. So a cyclic formula inside a large range contributed zero to the sum instead of surfacing #CYCLE!. The inconsistency is invisible in normal recalculation: the topological sort in recalculate_incremental detects cycles before any evaluation, so the branch only fires through the legacy recursive get_cell_value API. The fix makes the two range paths agree.	2026-08-17 11:49:00 +00:00
andodeki	2ba06f34c5	fix(makepad-table): stop overlong cell text spilling into the next column ... A right-aligned cell whose text is wider than its column drew over the left-aligned text in the column beside it. Two separate causes, one on each side of the cell. **Spilling left.** `align_text_x` computed `pos.x + width - pad.right - text_width` for right alignment and `pos.x + (width - text_width) * 0.5` for centre. Once `text_width` exceeds the column width both go *negative relative to the cell*, so the run started outside its own cell and reached backwards over the previous column. That is the reported collision: the right-aligned column's text sitting on top of its left-aligned neighbour. The result is now clamped to the padded left edge, so an overlong string starts where a left-aligned one would and runs forwards. **Spilling right.** Clamping alone only fixes the near side — the run would still continue past the cell's right edge into the following column, which is the same overlap seen from the other direction. `fit_text_to_cell` shortens anything wider than the padded width and appends an ellipsis. `DrawText` can do this itself via `text_overflow: Ellipsis`, but only through `draw_walk`, which needs a turtle; these cells are drawn absolutely with `draw_abs`. The truncation therefore uses the same 7px-per-character estimate the positioning already used, so one approximation is applied consistently rather than two that can disagree. When a real text measurer replaces it, both callers change together. Order matters in `draw_cells`: the text is truncated first and the *truncated* string is aligned. Aligning the original and drawing a shorter one positions the run by a width it no longer has, which puts the overlap back. Tests 51 -> 59. Verified by reintroducing four defects: removing the clamp fails the left-spill test, removing truncation fails three, aligning the full text fails the ordering test, and measuring bytes fails the multi-byte test. Two of those needed the tests fixed first, and both were mine: - The draw-path ordering had no coverage at all, because `draw_cells` needs a live `Cx`. It now reads the source for the order of the two calls. Blunt, but an accidental reordering is exactly the regression this invites. - `truncation_counts_characters_not_bytes` passed with `len()` substituted for `chars().count()`. The byte count only gates *whether* to truncate, and the case I wrote was one that should be truncated either way. The test now uses a multi-byte string that comfortably fits — which `len()` would wrongly shorten — so the assertion turns on the difference rather than merely being near it.	2026-08-17 11:38:55 +00:00