[improve] Update the tlp config

This commit is contained in:
Anas Elgarhy 2023-05-07 05:00:05 +03:00
parent 3e1bb5e15c
commit 43acbe091c
No known key found for this signature in database
GPG key ID: 0501802A1D496528

View file

@ -24,9 +24,7 @@
# tlp - Parameters for power saving # tlp - Parameters for power saving
# Set to 0 to disable, 1 to enable TLP. # Set to 0 to disable, 1 to enable TLP.
# Default: 1 TLP_ENABLE=1
#TLP_ENABLE=1
# Control how warnings about invalid settings are issued: # Control how warnings about invalid settings are issued:
# 0=disabled, # 0=disabled,
@ -39,15 +37,11 @@
# Operation mode when no power supply can be detected: AC, BAT. # Operation mode when no power supply can be detected: AC, BAT.
# Concerns some desktop and embedded hardware only. # Concerns some desktop and embedded hardware only.
# Default: <none> TLP_DEFAULT_MODE=AC
#TLP_DEFAULT_MODE=AC
# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE # Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
# Note: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. # Note: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
# Default: 0 TLP_PERSISTENT_DEFAULT=0
#TLP_PERSISTENT_DEFAULT=0
# Power supply classes to ignore when determining operation mode: AC, USB, BAT. # Power supply classes to ignore when determining operation mode: AC, USB, BAT.
# Separate multiple classes with spaces. # Separate multiple classes with spaces.
@ -58,10 +52,8 @@
# Seconds laptop mode has to wait after the disk goes idle before doing a sync. # Seconds laptop mode has to wait after the disk goes idle before doing a sync.
# Non-zero value enables, zero disables laptop mode. # Non-zero value enables, zero disables laptop mode.
# Default: 0 (AC), 2 (BAT) DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
#DISK_IDLE_SECS_ON_AC=0
#DISK_IDLE_SECS_ON_BAT=2
# Dirty page values (timeouts in secs). # Dirty page values (timeouts in secs).
# Default: 15 (AC), 60 (BAT) # Default: 15 (AC), 60 (BAT)
@ -82,10 +74,8 @@
# and therefore kernel and most distributions have chosen them as defaults. # and therefore kernel and most distributions have chosen them as defaults.
# You should have done your research about advantages/disadvantages *before* # You should have done your research about advantages/disadvantages *before*
# changing the governor. # changing the governor.
# Default: <none> CPU_SCALING_GOVERNOR_ON_AC=performance
CPU_SCALING_GOVERNOR_ON_BAT=powersave
#CPU_SCALING_GOVERNOR_ON_AC=powersave
#CPU_SCALING_GOVERNOR_ON_BAT=powersave
# Set the min/max frequency available for the scaling governor. # Set the min/max frequency available for the scaling governor.
# Possible values depend on your CPU. For available frequencies see # Possible values depend on your CPU. For available frequencies see
@ -131,26 +121,20 @@
# Set the CPU "turbo boost" (Intel) or "turbo core" (AMD) feature: # Set the CPU "turbo boost" (Intel) or "turbo core" (AMD) feature:
# 0=disable, 1=allow. # 0=disable, 1=allow.
# Note: a value of 1 does *not* activate boosting, it just allows it. # Note: a value of 1 does *not* activate boosting, it just allows it.
# Default: <none> CPU_BOOST_ON_AC=1
CPU_BOOST_ON_BAT=0
#CPU_BOOST_ON_AC=1
#CPU_BOOST_ON_BAT=0
# Set the Intel CPU HWP dynamic boost feature: # Set the Intel CPU HWP dynamic boost feature:
# 0=disable, 1=enable. # 0=disable, 1=enable.
# Requires intel_pstate scaling driver in 'active' mode and Intel Core i # Requires intel_pstate scaling driver in 'active' mode and Intel Core i
# 6th gen. or newer CPU. # 6th gen. or newer CPU.
# Default: <none> CPU_HWP_DYN_BOOST_ON_AC=1
CPU_HWP_DYN_BOOST_ON_BAT=0
#CPU_HWP_DYN_BOOST_ON_AC=1
#CPU_HWP_DYN_BOOST_ON_BAT=0
# Minimize number of used CPU cores/hyper-threads under light load conditions: # Minimize number of used CPU cores/hyper-threads under light load conditions:
# 0=disable, 1=enable. # 0=disable, 1=enable.
# Default: 0 (AC), 1 (BAT) SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
#SCHED_POWERSAVE_ON_AC=0
#SCHED_POWERSAVE_ON_BAT=1
# Kernel NMI Watchdog: # Kernel NMI Watchdog:
# 0=disable (default, saves power), 1=enable (for kernel debugging only). # 0=disable (default, saves power), 1=enable (for kernel debugging only).
@ -164,10 +148,8 @@
# thermal and fan speed. Values are given in order of increasing power saving. # thermal and fan speed. Values are given in order of increasing power saving.
# Note: check the output of tlp-stat -p to determine availability on your # Note: check the output of tlp-stat -p to determine availability on your
# hardware and additional profiles such as: balanced-performance, quiet, cool. # hardware and additional profiles such as: balanced-performance, quiet, cool.
# Default: <none> PLATFORM_PROFILE_ON_AC=balanced_performance
PLATFORM_PROFILE_ON_BAT=balance_power
#PLATFORM_PROFILE_ON_AC=performance
#PLATFORM_PROFILE_ON_BAT=low-power
# Define disk devices on which the following DISK/AHCI_RUNTIME parameters act. # Define disk devices on which the following DISK/AHCI_RUNTIME parameters act.
# Separate multiple devices with spaces. # Separate multiple devices with spaces.
@ -202,10 +184,8 @@
# See 'man hdparm' for details. # See 'man hdparm' for details.
# Separate values for multiple disks with spaces. Use the special value 'keep' # Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the hardware default for the particular disk. # to keep the hardware default for the particular disk.
# Default: <none> DISK_SPINDOWN_TIMEOUT_ON_AC="keep"
DISK_SPINDOWN_TIMEOUT_ON_BAT="keep"
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
# Select I/O scheduler for the disk devices. # Select I/O scheduler for the disk devices.
# Multi queue (blk-mq) schedulers: # Multi queue (blk-mq) schedulers:
@ -310,10 +290,8 @@
#RADEON_POWER_PROFILE_ON_BAT=default #RADEON_POWER_PROFILE_ON_BAT=default
# Wi-Fi power saving mode: on=enable, off=disable. # Wi-Fi power saving mode: on=enable, off=disable.
# Default: off (AC), on (BAT) WIFI_PWR_ON_AC=off
WIFI_PWR_ON_BAT=off
#WIFI_PWR_ON_AC=off
#WIFI_PWR_ON_BAT=on
# Disable Wake-on-LAN: Y/N. # Disable Wake-on-LAN: Y/N.
# Default: Y # Default: Y
@ -324,10 +302,8 @@
# A value of 0 disables, >= 1 enables power saving. # A value of 0 disables, >= 1 enables power saving.
# Note: 1 is recommended for Linux desktop environments with PulseAudio, # Note: 1 is recommended for Linux desktop environments with PulseAudio,
# systems without PulseAudio may require 10. # systems without PulseAudio may require 10.
# Default: 1 SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=10
#SOUND_POWER_SAVE_ON_AC=1
#SOUND_POWER_SAVE_ON_BAT=1
# Disable controller too (HDA only): Y/N. # Disable controller too (HDA only): Y/N.
# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated. # Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated.
@ -376,9 +352,7 @@
#RUNTIME_PM_DISABLE="44:55.6" #RUNTIME_PM_DISABLE="44:55.6"
# Set to 0 to disable, 1 to enable USB autosuspend feature. # Set to 0 to disable, 1 to enable USB autosuspend feature.
# Default: 1 USB_AUTOSUSPEND=1
#USB_AUTOSUSPEND=1
# Exclude listed devices from USB autosuspend (separate with spaces). # Exclude listed devices from USB autosuspend (separate with spaces).
# Use lsusb to get the ids. # Use lsusb to get the ids.
@ -390,9 +364,7 @@
# Exclude audio devices from USB autosuspend: # Exclude audio devices from USB autosuspend:
# 0=do not exclude, 1=exclude. # 0=do not exclude, 1=exclude.
# Default: 1 USB_EXCLUDE_AUDIO=1
#USB_EXCLUDE_AUDIO=1
# Exclude bluetooth devices from USB autosuspend: # Exclude bluetooth devices from USB autosuspend:
# 0=do not exclude, 1=exclude. # 0=do not exclude, 1=exclude.
@ -402,9 +374,7 @@
# Exclude phone devices from USB autosuspend: # Exclude phone devices from USB autosuspend:
# 0=do not exclude, 1=exclude (enable charging). # 0=do not exclude, 1=exclude (enable charging).
# Default: 0 USB_EXCLUDE_PHONE=0
#USB_EXCLUDE_PHONE=0
# Exclude printers from USB autosuspend: # Exclude printers from USB autosuspend:
# 0=do not exclude, 1=exclude. # 0=do not exclude, 1=exclude.
@ -426,9 +396,7 @@
# Set to 1 to disable autosuspend before shutdown, 0 to do nothing # Set to 1 to disable autosuspend before shutdown, 0 to do nothing
# Note: use as a workaround for USB devices that cause shutdown problems. # Note: use as a workaround for USB devices that cause shutdown problems.
# Default: 0 USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=0
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=0
# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown # Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
# on system startup: 0=disable, 1=enable. # on system startup: 0=disable, 1=enable.
@ -440,21 +408,15 @@
# Radio devices to disable on startup: bluetooth, nfc, wifi, wwan. # Radio devices to disable on startup: bluetooth, nfc, wifi, wwan.
# Separate multiple devices with spaces. # Separate multiple devices with spaces.
# Default: <none> DEVICES_TO_DISABLE_ON_STARTUP="bluetooth"
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth nfc wifi wwan"
# Radio devices to enable on startup: bluetooth, nfc, wifi, wwan. # Radio devices to enable on startup: bluetooth, nfc, wifi, wwan.
# Separate multiple devices with spaces. # Separate multiple devices with spaces.
# Default: <none> DEVICES_TO_ENABLE_ON_STARTUP="wifi wwan"
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
# Radio devices to disable on shutdown: bluetooth, nfc, wifi, wwan. # Radio devices to disable on shutdown: bluetooth, nfc, wifi, wwan.
# Note: use as a workaround for devices that are blocking shutdown. # Note: use as a workaround for devices that are blocking shutdown.
# Default: <none> DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth nfc wifi wwan"
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth nfc wifi wwan"
# Radio devices to enable on shutdown: bluetooth, nfc, wifi, wwan. # Radio devices to enable on shutdown: bluetooth, nfc, wifi, wwan.
# (to prevent other operating systems from missing radios). # (to prevent other operating systems from missing radios).
@ -496,8 +458,6 @@
# BAT0: Primary / Main / Internal battery (values in %) # BAT0: Primary / Main / Internal battery (values in %)
# Note: also use for batteries BATC, BATT and CMB0 # Note: also use for batteries BATC, BATT and CMB0
# Default: <none>
START_CHARGE_THRESH_BAT0=50 START_CHARGE_THRESH_BAT0=50
STOP_CHARGE_THRESH_BAT0=1 STOP_CHARGE_THRESH_BAT0=1
@ -509,16 +469,12 @@ STOP_CHARGE_THRESH_BAT0=1
#STOP_CHARGE_THRESH_BAT1=80 #STOP_CHARGE_THRESH_BAT1=80
# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. # Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
# Default: 0 RESTORE_THRESHOLDS_ON_BAT="1"
RESTORE_THRESHOLDS_ON_BAT="0"
# Control battery care drivers: 0=disable, 1=enable. # Control battery care drivers: 0=disable, 1=enable.
# Default: 1 (all) NATACPI_ENABLE=1
TPACPI_ENABLE=1
#NATACPI_ENABLE=1 TPSMAPI_ENABLE=1
#TPACPI_ENABLE=1
#TPSMAPI_ENABLE=1
# ------------------------------------------------------------------------------ # ------------------------------------------------------------------------------
# tlp-rdw - Parameters for the radio device wizard # tlp-rdw - Parameters for the radio device wizard